TJ steering wheel
09-09-2005, 06:21 PM
#41
Guest
Posts: n/a
Re: TJ steering wheel
Mike Romain did pass the time by typing:
> The drag link had to be or needed to be adjusted to put the new box in
> and they missed it a bit.
>
> The spline on the steering shaft is notched where the bolt goes through
> and only fits one way.
>
> 5 deg is about 1/16 of a turn on the drag link.
Your probably right but I could swear the ZJ could be put back just about
any direction. Don't have a good photo but it does show a flat/milled spot.
The attachment bolt will work in any position it looks like.
Only had it off twice and marked both times, never tried another way of
putting it on. It does have a flat spot but no real "key", just a place to
hammer in the retaining pin.
http://www.revbeergoggles.com/temp/shaft.jpg
Then again I'm thinking ZJ, the TJ might have a different box.
--
DougW
> The drag link had to be or needed to be adjusted to put the new box in
> and they missed it a bit.
>
> The spline on the steering shaft is notched where the bolt goes through
> and only fits one way.
>
> 5 deg is about 1/16 of a turn on the drag link.
Your probably right but I could swear the ZJ could be put back just about
any direction. Don't have a good photo but it does show a flat/milled spot.
The attachment bolt will work in any position it looks like.
Only had it off twice and marked both times, never tried another way of
putting it on. It does have a flat spot but no real "key", just a place to
hammer in the retaining pin.
http://www.revbeergoggles.com/temp/shaft.jpg
Then again I'm thinking ZJ, the TJ might have a different box.
--
DougW
09-09-2005, 07:25 PM
#42
Guest
Posts: n/a
Re: TJ steering wheel
Hi Doug,
Your shafts you pictured will only fit one way, you were luck you
didn't find that out. I've spent twenty minutes with the box tittering
in my hand try to find it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Your probably right but I could swear the ZJ could be put back just about
> any direction. Don't have a good photo but it does show a flat/milled spot.
> The attachment bolt will work in any position it looks like.
>
> Only had it off twice and marked both times, never tried another way of
> putting it on. It does have a flat spot but no real "key", just a place to
> hammer in the retaining pin.
>
> http://www.revbeergoggles.com/temp/shaft.jpg
>
> Then again I'm thinking ZJ, the TJ might have a different box.
>
> --
> DougW
Your shafts you pictured will only fit one way, you were luck you
didn't find that out. I've spent twenty minutes with the box tittering
in my hand try to find it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Your probably right but I could swear the ZJ could be put back just about
> any direction. Don't have a good photo but it does show a flat/milled spot.
> The attachment bolt will work in any position it looks like.
>
> Only had it off twice and marked both times, never tried another way of
> putting it on. It does have a flat spot but no real "key", just a place to
> hammer in the retaining pin.
>
> http://www.revbeergoggles.com/temp/shaft.jpg
>
> Then again I'm thinking ZJ, the TJ might have a different box.
>
> --
> DougW
09-09-2005, 07:25 PM
#43
Guest
Posts: n/a
Re: TJ steering wheel
Hi Doug,
Your shafts you pictured will only fit one way, you were luck you
didn't find that out. I've spent twenty minutes with the box tittering
in my hand try to find it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Your probably right but I could swear the ZJ could be put back just about
> any direction. Don't have a good photo but it does show a flat/milled spot.
> The attachment bolt will work in any position it looks like.
>
> Only had it off twice and marked both times, never tried another way of
> putting it on. It does have a flat spot but no real "key", just a place to
> hammer in the retaining pin.
>
> http://www.revbeergoggles.com/temp/shaft.jpg
>
> Then again I'm thinking ZJ, the TJ might have a different box.
>
> --
> DougW
Your shafts you pictured will only fit one way, you were luck you
didn't find that out. I've spent twenty minutes with the box tittering
in my hand try to find it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Your probably right but I could swear the ZJ could be put back just about
> any direction. Don't have a good photo but it does show a flat/milled spot.
> The attachment bolt will work in any position it looks like.
>
> Only had it off twice and marked both times, never tried another way of
> putting it on. It does have a flat spot but no real "key", just a place to
> hammer in the retaining pin.
>
> http://www.revbeergoggles.com/temp/shaft.jpg
>
> Then again I'm thinking ZJ, the TJ might have a different box.
>
> --
> DougW
09-09-2005, 07:25 PM
#44
Guest
Posts: n/a
Re: TJ steering wheel
Hi Doug,
Your shafts you pictured will only fit one way, you were luck you
didn't find that out. I've spent twenty minutes with the box tittering
in my hand try to find it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Your probably right but I could swear the ZJ could be put back just about
> any direction. Don't have a good photo but it does show a flat/milled spot.
> The attachment bolt will work in any position it looks like.
>
> Only had it off twice and marked both times, never tried another way of
> putting it on. It does have a flat spot but no real "key", just a place to
> hammer in the retaining pin.
>
> http://www.revbeergoggles.com/temp/shaft.jpg
>
> Then again I'm thinking ZJ, the TJ might have a different box.
>
> --
> DougW
Your shafts you pictured will only fit one way, you were luck you
didn't find that out. I've spent twenty minutes with the box tittering
in my hand try to find it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Your probably right but I could swear the ZJ could be put back just about
> any direction. Don't have a good photo but it does show a flat/milled spot.
> The attachment bolt will work in any position it looks like.
>
> Only had it off twice and marked both times, never tried another way of
> putting it on. It does have a flat spot but no real "key", just a place to
> hammer in the retaining pin.
>
> http://www.revbeergoggles.com/temp/shaft.jpg
>
> Then again I'm thinking ZJ, the TJ might have a different box.
>
> --
> DougW
09-09-2005, 07:25 PM
#45
Guest
Posts: n/a
Re: TJ steering wheel
Hi Doug,
Your shafts you pictured will only fit one way, you were luck you
didn't find that out. I've spent twenty minutes with the box tittering
in my hand try to find it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Your probably right but I could swear the ZJ could be put back just about
> any direction. Don't have a good photo but it does show a flat/milled spot.
> The attachment bolt will work in any position it looks like.
>
> Only had it off twice and marked both times, never tried another way of
> putting it on. It does have a flat spot but no real "key", just a place to
> hammer in the retaining pin.
>
> http://www.revbeergoggles.com/temp/shaft.jpg
>
> Then again I'm thinking ZJ, the TJ might have a different box.
>
> --
> DougW
Your shafts you pictured will only fit one way, you were luck you
didn't find that out. I've spent twenty minutes with the box tittering
in my hand try to find it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Your probably right but I could swear the ZJ could be put back just about
> any direction. Don't have a good photo but it does show a flat/milled spot.
> The attachment bolt will work in any position it looks like.
>
> Only had it off twice and marked both times, never tried another way of
> putting it on. It does have a flat spot but no real "key", just a place to
> hammer in the retaining pin.
>
> http://www.revbeergoggles.com/temp/shaft.jpg
>
> Then again I'm thinking ZJ, the TJ might have a different box.
>
> --
> DougW
09-09-2005, 10:04 PM
#46
Guest
Posts: n/a
Re: TJ steering wheel
I think the shaft might fit a few ways, but the bolt only fits through
on the flat. That is the way the ones I have had apart seem to work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Hi Doug,
> Your shafts you pictured will only fit one way, you were luck you
> didn't find that out. I've spent twenty minutes with the box tittering
> in my hand try to find it.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
> >
> > Your probably right but I could swear the ZJ could be put back just about
> > any direction. Don't have a good photo but it does show a flat/milled spot.
> > The attachment bolt will work in any position it looks like.
> >
> > Only had it off twice and marked both times, never tried another way of
> > putting it on. It does have a flat spot but no real "key", just a place to
> > hammer in the retaining pin.
> >
> > http://www.revbeergoggles.com/temp/shaft.jpg
> >
> > Then again I'm thinking ZJ, the TJ might have a different box.
> >
> > --
> > DougW
on the flat. That is the way the ones I have had apart seem to work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Hi Doug,
> Your shafts you pictured will only fit one way, you were luck you
> didn't find that out. I've spent twenty minutes with the box tittering
> in my hand try to find it.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
> >
> > Your probably right but I could swear the ZJ could be put back just about
> > any direction. Don't have a good photo but it does show a flat/milled spot.
> > The attachment bolt will work in any position it looks like.
> >
> > Only had it off twice and marked both times, never tried another way of
> > putting it on. It does have a flat spot but no real "key", just a place to
> > hammer in the retaining pin.
> >
> > http://www.revbeergoggles.com/temp/shaft.jpg
> >
> > Then again I'm thinking ZJ, the TJ might have a different box.
> >
> > --
> > DougW
09-09-2005, 10:04 PM
#47
Guest
Posts: n/a
Re: TJ steering wheel
I think the shaft might fit a few ways, but the bolt only fits through
on the flat. That is the way the ones I have had apart seem to work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Hi Doug,
> Your shafts you pictured will only fit one way, you were luck you
> didn't find that out. I've spent twenty minutes with the box tittering
> in my hand try to find it.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
> >
> > Your probably right but I could swear the ZJ could be put back just about
> > any direction. Don't have a good photo but it does show a flat/milled spot.
> > The attachment bolt will work in any position it looks like.
> >
> > Only had it off twice and marked both times, never tried another way of
> > putting it on. It does have a flat spot but no real "key", just a place to
> > hammer in the retaining pin.
> >
> > http://www.revbeergoggles.com/temp/shaft.jpg
> >
> > Then again I'm thinking ZJ, the TJ might have a different box.
> >
> > --
> > DougW
on the flat. That is the way the ones I have had apart seem to work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Hi Doug,
> Your shafts you pictured will only fit one way, you were luck you
> didn't find that out. I've spent twenty minutes with the box tittering
> in my hand try to find it.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
> >
> > Your probably right but I could swear the ZJ could be put back just about
> > any direction. Don't have a good photo but it does show a flat/milled spot.
> > The attachment bolt will work in any position it looks like.
> >
> > Only had it off twice and marked both times, never tried another way of
> > putting it on. It does have a flat spot but no real "key", just a place to
> > hammer in the retaining pin.
> >
> > http://www.revbeergoggles.com/temp/shaft.jpg
> >
> > Then again I'm thinking ZJ, the TJ might have a different box.
> >
> > --
> > DougW
09-09-2005, 10:04 PM
#48
Guest
Posts: n/a
Re: TJ steering wheel
I think the shaft might fit a few ways, but the bolt only fits through
on the flat. That is the way the ones I have had apart seem to work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Hi Doug,
> Your shafts you pictured will only fit one way, you were luck you
> didn't find that out. I've spent twenty minutes with the box tittering
> in my hand try to find it.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
> >
> > Your probably right but I could swear the ZJ could be put back just about
> > any direction. Don't have a good photo but it does show a flat/milled spot.
> > The attachment bolt will work in any position it looks like.
> >
> > Only had it off twice and marked both times, never tried another way of
> > putting it on. It does have a flat spot but no real "key", just a place to
> > hammer in the retaining pin.
> >
> > http://www.revbeergoggles.com/temp/shaft.jpg
> >
> > Then again I'm thinking ZJ, the TJ might have a different box.
> >
> > --
> > DougW
on the flat. That is the way the ones I have had apart seem to work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Hi Doug,
> Your shafts you pictured will only fit one way, you were luck you
> didn't find that out. I've spent twenty minutes with the box tittering
> in my hand try to find it.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
> >
> > Your probably right but I could swear the ZJ could be put back just about
> > any direction. Don't have a good photo but it does show a flat/milled spot.
> > The attachment bolt will work in any position it looks like.
> >
> > Only had it off twice and marked both times, never tried another way of
> > putting it on. It does have a flat spot but no real "key", just a place to
> > hammer in the retaining pin.
> >
> > http://www.revbeergoggles.com/temp/shaft.jpg
> >
> > Then again I'm thinking ZJ, the TJ might have a different box.
> >
> > --
> > DougW
09-09-2005, 10:04 PM
#49
Guest
Posts: n/a
Re: TJ steering wheel
I think the shaft might fit a few ways, but the bolt only fits through
on the flat. That is the way the ones I have had apart seem to work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Hi Doug,
> Your shafts you pictured will only fit one way, you were luck you
> didn't find that out. I've spent twenty minutes with the box tittering
> in my hand try to find it.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
> >
> > Your probably right but I could swear the ZJ could be put back just about
> > any direction. Don't have a good photo but it does show a flat/milled spot.
> > The attachment bolt will work in any position it looks like.
> >
> > Only had it off twice and marked both times, never tried another way of
> > putting it on. It does have a flat spot but no real "key", just a place to
> > hammer in the retaining pin.
> >
> > http://www.revbeergoggles.com/temp/shaft.jpg
> >
> > Then again I'm thinking ZJ, the TJ might have a different box.
> >
> > --
> > DougW
on the flat. That is the way the ones I have had apart seem to work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"L.W.(ßill) ------ III" wrote:
>
> Hi Doug,
> Your shafts you pictured will only fit one way, you were luck you
> didn't find that out. I've spent twenty minutes with the box tittering
> in my hand try to find it.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
> >
> > Your probably right but I could swear the ZJ could be put back just about
> > any direction. Don't have a good photo but it does show a flat/milled spot.
> > The attachment bolt will work in any position it looks like.
> >
> > Only had it off twice and marked both times, never tried another way of
> > putting it on. It does have a flat spot but no real "key", just a place to
> > hammer in the retaining pin.
> >
> > http://www.revbeergoggles.com/temp/shaft.jpg
> >
> > Then again I'm thinking ZJ, the TJ might have a different box.
> >
> > --
> > DougW
09-09-2005, 10:29 PM
#50
Guest
Posts: n/a
Re: TJ steering wheel
OK, I know I was so damn tired by the time I finally got it
together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I think the shaft might fit a few ways, but the bolt only fits through
> on the flat. That is the way the ones I have had apart seem to work.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
together.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I think the shaft might fit a few ways, but the bolt only fits through
> on the flat. That is the way the ones I have had apart seem to work.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's