TJ Steering Stabilizer Replacement
09-25-2004, 05:53 PM
#1
Guest
Posts: n/a
TJ Steering Stabilizer Replacement
I'm in the process of replacing the OEM steering damper on my '98 TJ
with a Skyjacker OEM steering stabilizer. It's been a challenge, but
I got the bolt/nut off the end of the OEM stabilizer nearest the
wheel. It took a propane torch to heat up the nut on the tie rod end
to get it off. Problem now is I can't get the bolt end of the old
damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
Wrench, and the torch and it doesn't budge. This isn't threaded is
it? It should just pop out, right?
Thanks.
Mark
'98 TJ
'98 XJ
with a Skyjacker OEM steering stabilizer. It's been a challenge, but
I got the bolt/nut off the end of the OEM stabilizer nearest the
wheel. It took a propane torch to heat up the nut on the tie rod end
to get it off. Problem now is I can't get the bolt end of the old
damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
Wrench, and the torch and it doesn't budge. This isn't threaded is
it? It should just pop out, right?
Thanks.
Mark
'98 TJ
'98 XJ
09-25-2004, 06:23 PM
#2
Guest
Posts: n/a
Re: TJ Steering Stabilizer Replacement
Sounds like you need a puller, it's on a taper:
http://www.----------.com/dampener.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
"M. E. Bye" wrote:
>
> I'm in the process of replacing the OEM steering damper on my '98 TJ
> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
> I got the bolt/nut off the end of the OEM stabilizer nearest the
> wheel. It took a propane torch to heat up the nut on the tie rod end
> to get it off. Problem now is I can't get the bolt end of the old
> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
> Wrench, and the torch and it doesn't budge. This isn't threaded is
> it? It should just pop out, right?
>
> Thanks.
>
> Mark
> '98 TJ
> '98 XJ
http://www.----------.com/dampener.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
"M. E. Bye" wrote:
>
> I'm in the process of replacing the OEM steering damper on my '98 TJ
> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
> I got the bolt/nut off the end of the OEM stabilizer nearest the
> wheel. It took a propane torch to heat up the nut on the tie rod end
> to get it off. Problem now is I can't get the bolt end of the old
> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
> Wrench, and the torch and it doesn't budge. This isn't threaded is
> it? It should just pop out, right?
>
> Thanks.
>
> Mark
> '98 TJ
> '98 XJ
09-25-2004, 06:23 PM
#3
Guest
Posts: n/a
Re: TJ Steering Stabilizer Replacement
Sounds like you need a puller, it's on a taper:
http://www.----------.com/dampener.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
"M. E. Bye" wrote:
>
> I'm in the process of replacing the OEM steering damper on my '98 TJ
> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
> I got the bolt/nut off the end of the OEM stabilizer nearest the
> wheel. It took a propane torch to heat up the nut on the tie rod end
> to get it off. Problem now is I can't get the bolt end of the old
> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
> Wrench, and the torch and it doesn't budge. This isn't threaded is
> it? It should just pop out, right?
>
> Thanks.
>
> Mark
> '98 TJ
> '98 XJ
http://www.----------.com/dampener.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
"M. E. Bye" wrote:
>
> I'm in the process of replacing the OEM steering damper on my '98 TJ
> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
> I got the bolt/nut off the end of the OEM stabilizer nearest the
> wheel. It took a propane torch to heat up the nut on the tie rod end
> to get it off. Problem now is I can't get the bolt end of the old
> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
> Wrench, and the torch and it doesn't budge. This isn't threaded is
> it? It should just pop out, right?
>
> Thanks.
>
> Mark
> '98 TJ
> '98 XJ
09-25-2004, 06:23 PM
#4
Guest
Posts: n/a
Re: TJ Steering Stabilizer Replacement
Sounds like you need a puller, it's on a taper:
http://www.----------.com/dampener.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
"M. E. Bye" wrote:
>
> I'm in the process of replacing the OEM steering damper on my '98 TJ
> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
> I got the bolt/nut off the end of the OEM stabilizer nearest the
> wheel. It took a propane torch to heat up the nut on the tie rod end
> to get it off. Problem now is I can't get the bolt end of the old
> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
> Wrench, and the torch and it doesn't budge. This isn't threaded is
> it? It should just pop out, right?
>
> Thanks.
>
> Mark
> '98 TJ
> '98 XJ
http://www.----------.com/dampener.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
"M. E. Bye" wrote:
>
> I'm in the process of replacing the OEM steering damper on my '98 TJ
> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
> I got the bolt/nut off the end of the OEM stabilizer nearest the
> wheel. It took a propane torch to heat up the nut on the tie rod end
> to get it off. Problem now is I can't get the bolt end of the old
> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
> Wrench, and the torch and it doesn't budge. This isn't threaded is
> it? It should just pop out, right?
>
> Thanks.
>
> Mark
> '98 TJ
> '98 XJ
09-25-2004, 11:26 PM
#5
Guest
Posts: n/a
Re: TJ Steering Stabilizer Replacement
On Sat, 25 Sep 2004 15:23:02 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> Sounds like you need a puller, it's on a taper:
>"M. E. Bye" wrote:
>>
>> I'm in the process of replacing the OEM steering damper on my '98 TJ
>> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
>> I got the bolt/nut off the end of the OEM stabilizer nearest the
>> wheel. It took a propane torch to heat up the nut on the tie rod end
>> to get it off. Problem now is I can't get the bolt end of the old
>> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
>> Wrench, and the torch and it doesn't budge. This isn't threaded is
>> it? It should just pop out, right?
>>
>> Thanks.
>>
>> Mark
>> '98 TJ
>> '98 XJ
What kind of puller and where do I get one?
Thanks!
Mark
<----------@***.net> wrote:
> Sounds like you need a puller, it's on a taper:
>"M. E. Bye" wrote:
>>
>> I'm in the process of replacing the OEM steering damper on my '98 TJ
>> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
>> I got the bolt/nut off the end of the OEM stabilizer nearest the
>> wheel. It took a propane torch to heat up the nut on the tie rod end
>> to get it off. Problem now is I can't get the bolt end of the old
>> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
>> Wrench, and the torch and it doesn't budge. This isn't threaded is
>> it? It should just pop out, right?
>>
>> Thanks.
>>
>> Mark
>> '98 TJ
>> '98 XJ
What kind of puller and where do I get one?
Thanks!
Mark
09-25-2004, 11:26 PM
#6
Guest
Posts: n/a
Re: TJ Steering Stabilizer Replacement
On Sat, 25 Sep 2004 15:23:02 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> Sounds like you need a puller, it's on a taper:
>"M. E. Bye" wrote:
>>
>> I'm in the process of replacing the OEM steering damper on my '98 TJ
>> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
>> I got the bolt/nut off the end of the OEM stabilizer nearest the
>> wheel. It took a propane torch to heat up the nut on the tie rod end
>> to get it off. Problem now is I can't get the bolt end of the old
>> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
>> Wrench, and the torch and it doesn't budge. This isn't threaded is
>> it? It should just pop out, right?
>>
>> Thanks.
>>
>> Mark
>> '98 TJ
>> '98 XJ
What kind of puller and where do I get one?
Thanks!
Mark
<----------@***.net> wrote:
> Sounds like you need a puller, it's on a taper:
>"M. E. Bye" wrote:
>>
>> I'm in the process of replacing the OEM steering damper on my '98 TJ
>> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
>> I got the bolt/nut off the end of the OEM stabilizer nearest the
>> wheel. It took a propane torch to heat up the nut on the tie rod end
>> to get it off. Problem now is I can't get the bolt end of the old
>> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
>> Wrench, and the torch and it doesn't budge. This isn't threaded is
>> it? It should just pop out, right?
>>
>> Thanks.
>>
>> Mark
>> '98 TJ
>> '98 XJ
What kind of puller and where do I get one?
Thanks!
Mark
09-25-2004, 11:26 PM
#7
Guest
Posts: n/a
Re: TJ Steering Stabilizer Replacement
On Sat, 25 Sep 2004 15:23:02 -0700, L.W.(ßill) ------ III
<----------@***.net> wrote:
> Sounds like you need a puller, it's on a taper:
>"M. E. Bye" wrote:
>>
>> I'm in the process of replacing the OEM steering damper on my '98 TJ
>> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
>> I got the bolt/nut off the end of the OEM stabilizer nearest the
>> wheel. It took a propane torch to heat up the nut on the tie rod end
>> to get it off. Problem now is I can't get the bolt end of the old
>> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
>> Wrench, and the torch and it doesn't budge. This isn't threaded is
>> it? It should just pop out, right?
>>
>> Thanks.
>>
>> Mark
>> '98 TJ
>> '98 XJ
What kind of puller and where do I get one?
Thanks!
Mark
<----------@***.net> wrote:
> Sounds like you need a puller, it's on a taper:
>"M. E. Bye" wrote:
>>
>> I'm in the process of replacing the OEM steering damper on my '98 TJ
>> with a Skyjacker OEM steering stabilizer. It's been a challenge, but
>> I got the bolt/nut off the end of the OEM stabilizer nearest the
>> wheel. It took a propane torch to heat up the nut on the tie rod end
>> to get it off. Problem now is I can't get the bolt end of the old
>> damper out of the tie rod. I've hammered on it. Used WD-40, Liquid
>> Wrench, and the torch and it doesn't budge. This isn't threaded is
>> it? It should just pop out, right?
>>
>> Thanks.
>>
>> Mark
>> '98 TJ
>> '98 XJ
What kind of puller and where do I get one?
Thanks!
Mark
Thread
Thread Starter
Forum
Replies
Last Post
Lon
Jeep Mailing List
16
06-22-2007 03:50 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
