TJ soft top part
#14
Guest
Posts: n/a
Re: TJ soft top part
The plastic piece slides into the soft top bow, just make one out of a
hardwood and paint it black, or go to a machine shop and have them make one
out of aluminum.
--
Coasty
SEMPAR PARATUS
(ALWAYS READY)
Remove The SPOOGE To Reply
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121258400.945571.51980@o13g2000cwo.googlegro ups.com...
> Thanks Bill. I tried them too. They won't sell OEM hardware pieces.
> Just their aftermarket (Sunrider, Supertop etc) hardware. They
> suggested I go to a dealer for the part ...
>
hardwood and paint it black, or go to a machine shop and have them make one
out of aluminum.
--
Coasty
SEMPAR PARATUS
(ALWAYS READY)
Remove The SPOOGE To Reply
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121258400.945571.51980@o13g2000cwo.googlegro ups.com...
> Thanks Bill. I tried them too. They won't sell OEM hardware pieces.
> Just their aftermarket (Sunrider, Supertop etc) hardware. They
> suggested I go to a dealer for the part ...
>
#15
Guest
Posts: n/a
Re: TJ soft top part
The plastic piece slides into the soft top bow, just make one out of a
hardwood and paint it black, or go to a machine shop and have them make one
out of aluminum.
--
Coasty
SEMPAR PARATUS
(ALWAYS READY)
Remove The SPOOGE To Reply
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121258400.945571.51980@o13g2000cwo.googlegro ups.com...
> Thanks Bill. I tried them too. They won't sell OEM hardware pieces.
> Just their aftermarket (Sunrider, Supertop etc) hardware. They
> suggested I go to a dealer for the part ...
>
hardwood and paint it black, or go to a machine shop and have them make one
out of aluminum.
--
Coasty
SEMPAR PARATUS
(ALWAYS READY)
Remove The SPOOGE To Reply
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121258400.945571.51980@o13g2000cwo.googlegro ups.com...
> Thanks Bill. I tried them too. They won't sell OEM hardware pieces.
> Just their aftermarket (Sunrider, Supertop etc) hardware. They
> suggested I go to a dealer for the part ...
>
#16
Guest
Posts: n/a
Re: TJ soft top part
The plastic piece slides into the soft top bow, just make one out of a
hardwood and paint it black, or go to a machine shop and have them make one
out of aluminum.
--
Coasty
SEMPAR PARATUS
(ALWAYS READY)
Remove The SPOOGE To Reply
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121258400.945571.51980@o13g2000cwo.googlegro ups.com...
> Thanks Bill. I tried them too. They won't sell OEM hardware pieces.
> Just their aftermarket (Sunrider, Supertop etc) hardware. They
> suggested I go to a dealer for the part ...
>
hardwood and paint it black, or go to a machine shop and have them make one
out of aluminum.
--
Coasty
SEMPAR PARATUS
(ALWAYS READY)
Remove The SPOOGE To Reply
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121258400.945571.51980@o13g2000cwo.googlegro ups.com...
> Thanks Bill. I tried them too. They won't sell OEM hardware pieces.
> Just their aftermarket (Sunrider, Supertop etc) hardware. They
> suggested I go to a dealer for the part ...
>
#17
Guest
Posts: n/a
Re: TJ soft top part
The plastic piece slides into the soft top bow, just make one out of a
hardwood and paint it black, or go to a machine shop and have them make one
out of aluminum.
--
Coasty
SEMPAR PARATUS
(ALWAYS READY)
Remove The SPOOGE To Reply
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121258400.945571.51980@o13g2000cwo.googlegro ups.com...
> Thanks Bill. I tried them too. They won't sell OEM hardware pieces.
> Just their aftermarket (Sunrider, Supertop etc) hardware. They
> suggested I go to a dealer for the part ...
>
hardwood and paint it black, or go to a machine shop and have them make one
out of aluminum.
--
Coasty
SEMPAR PARATUS
(ALWAYS READY)
Remove The SPOOGE To Reply
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121258400.945571.51980@o13g2000cwo.googlegro ups.com...
> Thanks Bill. I tried them too. They won't sell OEM hardware pieces.
> Just their aftermarket (Sunrider, Supertop etc) hardware. They
> suggested I go to a dealer for the part ...
>
#18
Guest
Posts: n/a
Re: TJ soft top part
try a junkyard you might be surprised!
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121215246.777510.28680@g47g2000cwa.googlegro ups.com...
> I need a plastic end cap for my factory TJ soft top. I've tried the
> local dealer but they only sell it as part as the entire top bow of the
> frame for $300+ dollars. I also tried ChryslerPartsDirect.com and they
> twice sent me the plastic pivot that attaches to the end of the side
> bow. I attached a picture of the end cap I need.
>
>
http://mysite.verizon.net/hguarini/s...derpictures/.p
ond/img_0263_edited.jpg.w300h225.jpg
>
>
> Has anyone ever replaced just this piece??? If so where did you get
> it???
>
> Thanks,
> Howie
>
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121215246.777510.28680@g47g2000cwa.googlegro ups.com...
> I need a plastic end cap for my factory TJ soft top. I've tried the
> local dealer but they only sell it as part as the entire top bow of the
> frame for $300+ dollars. I also tried ChryslerPartsDirect.com and they
> twice sent me the plastic pivot that attaches to the end of the side
> bow. I attached a picture of the end cap I need.
>
>
http://mysite.verizon.net/hguarini/s...derpictures/.p
ond/img_0263_edited.jpg.w300h225.jpg
>
>
> Has anyone ever replaced just this piece??? If so where did you get
> it???
>
> Thanks,
> Howie
>
#19
Guest
Posts: n/a
Re: TJ soft top part
try a junkyard you might be surprised!
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121215246.777510.28680@g47g2000cwa.googlegro ups.com...
> I need a plastic end cap for my factory TJ soft top. I've tried the
> local dealer but they only sell it as part as the entire top bow of the
> frame for $300+ dollars. I also tried ChryslerPartsDirect.com and they
> twice sent me the plastic pivot that attaches to the end of the side
> bow. I attached a picture of the end cap I need.
>
>
http://mysite.verizon.net/hguarini/s...derpictures/.p
ond/img_0263_edited.jpg.w300h225.jpg
>
>
> Has anyone ever replaced just this piece??? If so where did you get
> it???
>
> Thanks,
> Howie
>
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121215246.777510.28680@g47g2000cwa.googlegro ups.com...
> I need a plastic end cap for my factory TJ soft top. I've tried the
> local dealer but they only sell it as part as the entire top bow of the
> frame for $300+ dollars. I also tried ChryslerPartsDirect.com and they
> twice sent me the plastic pivot that attaches to the end of the side
> bow. I attached a picture of the end cap I need.
>
>
http://mysite.verizon.net/hguarini/s...derpictures/.p
ond/img_0263_edited.jpg.w300h225.jpg
>
>
> Has anyone ever replaced just this piece??? If so where did you get
> it???
>
> Thanks,
> Howie
>
#20
Guest
Posts: n/a
Re: TJ soft top part
try a junkyard you might be surprised!
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121215246.777510.28680@g47g2000cwa.googlegro ups.com...
> I need a plastic end cap for my factory TJ soft top. I've tried the
> local dealer but they only sell it as part as the entire top bow of the
> frame for $300+ dollars. I also tried ChryslerPartsDirect.com and they
> twice sent me the plastic pivot that attaches to the end of the side
> bow. I attached a picture of the end cap I need.
>
>
http://mysite.verizon.net/hguarini/s...derpictures/.p
ond/img_0263_edited.jpg.w300h225.jpg
>
>
> Has anyone ever replaced just this piece??? If so where did you get
> it???
>
> Thanks,
> Howie
>
"HG97TJ" <hguarini@yahoo.com> wrote in message
news:1121215246.777510.28680@g47g2000cwa.googlegro ups.com...
> I need a plastic end cap for my factory TJ soft top. I've tried the
> local dealer but they only sell it as part as the entire top bow of the
> frame for $300+ dollars. I also tried ChryslerPartsDirect.com and they
> twice sent me the plastic pivot that attaches to the end of the side
> bow. I attached a picture of the end cap I need.
>
>
http://mysite.verizon.net/hguarini/s...derpictures/.p
ond/img_0263_edited.jpg.w300h225.jpg
>
>
> Has anyone ever replaced just this piece??? If so where did you get
> it???
>
> Thanks,
> Howie
>