TJ Heater Question?
11-11-2004, 10:40 AM
#2
Guest
Posts: n/a
Re: TJ Heater Question?
That is an odd one... The high setting is a direct 12 volts to the
heater motor.
What year?
There is a recall out on the 99's at least about a bad ground connection
on the back right of the instrument cluster panel that will cause the
heater switch not to work. Maybe yours is loose so when it asks for
full power the connection fails?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
sp wrote:
>
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
heater motor.
What year?
There is a recall out on the 99's at least about a bad ground connection
on the back right of the instrument cluster panel that will cause the
heater switch not to work. Maybe yours is loose so when it asks for
full power the connection fails?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
sp wrote:
>
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
11-11-2004, 10:40 AM
#3
Guest
Posts: n/a
Re: TJ Heater Question?
That is an odd one... The high setting is a direct 12 volts to the
heater motor.
What year?
There is a recall out on the 99's at least about a bad ground connection
on the back right of the instrument cluster panel that will cause the
heater switch not to work. Maybe yours is loose so when it asks for
full power the connection fails?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
sp wrote:
>
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
heater motor.
What year?
There is a recall out on the 99's at least about a bad ground connection
on the back right of the instrument cluster panel that will cause the
heater switch not to work. Maybe yours is loose so when it asks for
full power the connection fails?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
sp wrote:
>
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
11-11-2004, 10:40 AM
#4
Guest
Posts: n/a
Re: TJ Heater Question?
That is an odd one... The high setting is a direct 12 volts to the
heater motor.
What year?
There is a recall out on the 99's at least about a bad ground connection
on the back right of the instrument cluster panel that will cause the
heater switch not to work. Maybe yours is loose so when it asks for
full power the connection fails?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
sp wrote:
>
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
heater motor.
What year?
There is a recall out on the 99's at least about a bad ground connection
on the back right of the instrument cluster panel that will cause the
heater switch not to work. Maybe yours is loose so when it asks for
full power the connection fails?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
sp wrote:
>
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
11-11-2004, 11:02 AM
#5
Guest
Posts: n/a
Re: TJ Heater Question?
Yeah it is strange...
It is a 97 Wrangler.. It was working on the highest setting and all
ofa sudden stopped. the first three settings work great..
thanks,
SP
On Thu, 11 Nov 2004 10:40:21 -0500, Mike Romain <romainm@sympatico.ca>
wrote:
>That is an odd one... The high setting is a direct 12 volts to the
>heater motor.
>
>What year?
>
>There is a recall out on the 99's at least about a bad ground connection
>on the back right of the instrument cluster panel that will cause the
>heater switch not to work. Maybe yours is loose so when it asks for
>full power the connection fails?
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>sp wrote:
>>
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
It is a 97 Wrangler.. It was working on the highest setting and all
ofa sudden stopped. the first three settings work great..
thanks,
SP
On Thu, 11 Nov 2004 10:40:21 -0500, Mike Romain <romainm@sympatico.ca>
wrote:
>That is an odd one... The high setting is a direct 12 volts to the
>heater motor.
>
>What year?
>
>There is a recall out on the 99's at least about a bad ground connection
>on the back right of the instrument cluster panel that will cause the
>heater switch not to work. Maybe yours is loose so when it asks for
>full power the connection fails?
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>sp wrote:
>>
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
11-11-2004, 11:02 AM
#6
Guest
Posts: n/a
Re: TJ Heater Question?
Yeah it is strange...
It is a 97 Wrangler.. It was working on the highest setting and all
ofa sudden stopped. the first three settings work great..
thanks,
SP
On Thu, 11 Nov 2004 10:40:21 -0500, Mike Romain <romainm@sympatico.ca>
wrote:
>That is an odd one... The high setting is a direct 12 volts to the
>heater motor.
>
>What year?
>
>There is a recall out on the 99's at least about a bad ground connection
>on the back right of the instrument cluster panel that will cause the
>heater switch not to work. Maybe yours is loose so when it asks for
>full power the connection fails?
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>sp wrote:
>>
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
It is a 97 Wrangler.. It was working on the highest setting and all
ofa sudden stopped. the first three settings work great..
thanks,
SP
On Thu, 11 Nov 2004 10:40:21 -0500, Mike Romain <romainm@sympatico.ca>
wrote:
>That is an odd one... The high setting is a direct 12 volts to the
>heater motor.
>
>What year?
>
>There is a recall out on the 99's at least about a bad ground connection
>on the back right of the instrument cluster panel that will cause the
>heater switch not to work. Maybe yours is loose so when it asks for
>full power the connection fails?
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>sp wrote:
>>
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
11-11-2004, 11:02 AM
#7
Guest
Posts: n/a
Re: TJ Heater Question?
Yeah it is strange...
It is a 97 Wrangler.. It was working on the highest setting and all
ofa sudden stopped. the first three settings work great..
thanks,
SP
On Thu, 11 Nov 2004 10:40:21 -0500, Mike Romain <romainm@sympatico.ca>
wrote:
>That is an odd one... The high setting is a direct 12 volts to the
>heater motor.
>
>What year?
>
>There is a recall out on the 99's at least about a bad ground connection
>on the back right of the instrument cluster panel that will cause the
>heater switch not to work. Maybe yours is loose so when it asks for
>full power the connection fails?
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>sp wrote:
>>
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
It is a 97 Wrangler.. It was working on the highest setting and all
ofa sudden stopped. the first three settings work great..
thanks,
SP
On Thu, 11 Nov 2004 10:40:21 -0500, Mike Romain <romainm@sympatico.ca>
wrote:
>That is an odd one... The high setting is a direct 12 volts to the
>heater motor.
>
>What year?
>
>There is a recall out on the 99's at least about a bad ground connection
>on the back right of the instrument cluster panel that will cause the
>heater switch not to work. Maybe yours is loose so when it asks for
>full power the connection fails?
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>sp wrote:
>>
>> Hello,
>>
>> I have a problem with my heater.. It blows out heat just fine.. but
>> when I turn the dial up tp the highest level it cuts off..
>> Has anyone seen this problem before?
>>
>> TIA!!
>>
>> SP
11-11-2004, 12:07 PM
#8
Guest
Posts: n/a
Re: TJ Heater Question?
I just fixed mine ,it's the sensor chip ,i don't know what it's called , my
garage said it happens alot ,,,,, 10$ that's all
"sp" <dinglle71@yahoo.com> wrote in message
news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
garage said it happens alot ,,,,, 10$ that's all
"sp" <dinglle71@yahoo.com> wrote in message
news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
11-11-2004, 12:07 PM
#9
Guest
Posts: n/a
Re: TJ Heater Question?
I just fixed mine ,it's the sensor chip ,i don't know what it's called , my
garage said it happens alot ,,,,, 10$ that's all
"sp" <dinglle71@yahoo.com> wrote in message
news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
garage said it happens alot ,,,,, 10$ that's all
"sp" <dinglle71@yahoo.com> wrote in message
news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
11-11-2004, 12:07 PM
#10
Guest
Posts: n/a
Re: TJ Heater Question?
I just fixed mine ,it's the sensor chip ,i don't know what it's called , my
garage said it happens alot ,,,,, 10$ that's all
"sp" <dinglle71@yahoo.com> wrote in message
news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP
garage said it happens alot ,,,,, 10$ that's all
"sp" <dinglle71@yahoo.com> wrote in message
news:9tv6p05vokkn8msdonrjpabr3btkaguhv0@4ax.com...
> Hello,
>
> I have a problem with my heater.. It blows out heat just fine.. but
> when I turn the dial up tp the highest level it cuts off..
> Has anyone seen this problem before?
>
> TIA!!
>
> SP