Titanium Brush Guard?
#11
Guest
Posts: n/a
Re: Titanium Brush Guard?
Make sure you aren't buying a steel brush guard that is powdercoated with a
titanium colored powder. This is a pretty common way to make brush guards.
I'm not sure if I've ever seen one actually made out of titanium, and it
would no doubt cost much more than the stainless one. Titanium tubing is
very expensive and quite difficult to weld.
Chris
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:horVc.155253$M95.130262@pd7tw1no...
> About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> figure it out ...
>
> "Ken" <boxercrazy@nventure.com> wrote in message
> news:10ibvrnmccno16f@corp.supernews.com...
> > Its a lot lighter. I don't know if it stronger.
> >
> > What is the cost?
> >
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > Is a titanium brush guard as good/better than stainless steel? It's
> > > powder-coated, if that makes any difference. The guy here says it's
> > stronger
> > > but will it last as long? Will it lose it's appearance, etc?
> > >
> > > Thanks!
> > >
> > >
> >
> >
>
>
titanium colored powder. This is a pretty common way to make brush guards.
I'm not sure if I've ever seen one actually made out of titanium, and it
would no doubt cost much more than the stainless one. Titanium tubing is
very expensive and quite difficult to weld.
Chris
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:horVc.155253$M95.130262@pd7tw1no...
> About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> figure it out ...
>
> "Ken" <boxercrazy@nventure.com> wrote in message
> news:10ibvrnmccno16f@corp.supernews.com...
> > Its a lot lighter. I don't know if it stronger.
> >
> > What is the cost?
> >
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > Is a titanium brush guard as good/better than stainless steel? It's
> > > powder-coated, if that makes any difference. The guy here says it's
> > stronger
> > > but will it last as long? Will it lose it's appearance, etc?
> > >
> > > Thanks!
> > >
> > >
> >
> >
>
>
#12
Guest
Posts: n/a
Re: Titanium Brush Guard?
Make sure you aren't buying a steel brush guard that is powdercoated with a
titanium colored powder. This is a pretty common way to make brush guards.
I'm not sure if I've ever seen one actually made out of titanium, and it
would no doubt cost much more than the stainless one. Titanium tubing is
very expensive and quite difficult to weld.
Chris
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:horVc.155253$M95.130262@pd7tw1no...
> About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> figure it out ...
>
> "Ken" <boxercrazy@nventure.com> wrote in message
> news:10ibvrnmccno16f@corp.supernews.com...
> > Its a lot lighter. I don't know if it stronger.
> >
> > What is the cost?
> >
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > Is a titanium brush guard as good/better than stainless steel? It's
> > > powder-coated, if that makes any difference. The guy here says it's
> > stronger
> > > but will it last as long? Will it lose it's appearance, etc?
> > >
> > > Thanks!
> > >
> > >
> >
> >
>
>
titanium colored powder. This is a pretty common way to make brush guards.
I'm not sure if I've ever seen one actually made out of titanium, and it
would no doubt cost much more than the stainless one. Titanium tubing is
very expensive and quite difficult to weld.
Chris
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:horVc.155253$M95.130262@pd7tw1no...
> About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> figure it out ...
>
> "Ken" <boxercrazy@nventure.com> wrote in message
> news:10ibvrnmccno16f@corp.supernews.com...
> > Its a lot lighter. I don't know if it stronger.
> >
> > What is the cost?
> >
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > Is a titanium brush guard as good/better than stainless steel? It's
> > > powder-coated, if that makes any difference. The guy here says it's
> > stronger
> > > but will it last as long? Will it lose it's appearance, etc?
> > >
> > > Thanks!
> > >
> > >
> >
> >
>
>
#13
Guest
Posts: n/a
Re: Titanium Brush Guard?
Make sure you aren't buying a steel brush guard that is powdercoated with a
titanium colored powder. This is a pretty common way to make brush guards.
I'm not sure if I've ever seen one actually made out of titanium, and it
would no doubt cost much more than the stainless one. Titanium tubing is
very expensive and quite difficult to weld.
Chris
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:horVc.155253$M95.130262@pd7tw1no...
> About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> figure it out ...
>
> "Ken" <boxercrazy@nventure.com> wrote in message
> news:10ibvrnmccno16f@corp.supernews.com...
> > Its a lot lighter. I don't know if it stronger.
> >
> > What is the cost?
> >
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > Is a titanium brush guard as good/better than stainless steel? It's
> > > powder-coated, if that makes any difference. The guy here says it's
> > stronger
> > > but will it last as long? Will it lose it's appearance, etc?
> > >
> > > Thanks!
> > >
> > >
> >
> >
>
>
titanium colored powder. This is a pretty common way to make brush guards.
I'm not sure if I've ever seen one actually made out of titanium, and it
would no doubt cost much more than the stainless one. Titanium tubing is
very expensive and quite difficult to weld.
Chris
"griffin" <gryffy@DELTHISshaw.ca> wrote in message
news:horVc.155253$M95.130262@pd7tw1no...
> About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> figure it out ...
>
> "Ken" <boxercrazy@nventure.com> wrote in message
> news:10ibvrnmccno16f@corp.supernews.com...
> > Its a lot lighter. I don't know if it stronger.
> >
> > What is the cost?
> >
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > Is a titanium brush guard as good/better than stainless steel? It's
> > > powder-coated, if that makes any difference. The guy here says it's
> > stronger
> > > but will it last as long? Will it lose it's appearance, etc?
> > >
> > > Thanks!
> > >
> > >
> >
> >
>
>
#14
Guest
Posts: n/a
Re: Titanium Brush Guard?
I agree!
There are some sleaze ball Jeep shops out there that take big advantage
over people that don't know any better!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
c wrote:
>
> Make sure you aren't buying a steel brush guard that is powdercoated with a
> titanium colored powder. This is a pretty common way to make brush guards.
> I'm not sure if I've ever seen one actually made out of titanium, and it
> would no doubt cost much more than the stainless one. Titanium tubing is
> very expensive and quite difficult to weld.
>
> Chris
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:horVc.155253$M95.130262@pd7tw1no...
> > About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> > figure it out ...
> >
> > "Ken" <boxercrazy@nventure.com> wrote in message
> > news:10ibvrnmccno16f@corp.supernews.com...
> > > Its a lot lighter. I don't know if it stronger.
> > >
> > > What is the cost?
> > >
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > Is a titanium brush guard as good/better than stainless steel? It's
> > > > powder-coated, if that makes any difference. The guy here says it's
> > > stronger
> > > > but will it last as long? Will it lose it's appearance, etc?
> > > >
> > > > Thanks!
> > > >
> > > >
> > >
> > >
> >
> >
There are some sleaze ball Jeep shops out there that take big advantage
over people that don't know any better!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
c wrote:
>
> Make sure you aren't buying a steel brush guard that is powdercoated with a
> titanium colored powder. This is a pretty common way to make brush guards.
> I'm not sure if I've ever seen one actually made out of titanium, and it
> would no doubt cost much more than the stainless one. Titanium tubing is
> very expensive and quite difficult to weld.
>
> Chris
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:horVc.155253$M95.130262@pd7tw1no...
> > About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> > figure it out ...
> >
> > "Ken" <boxercrazy@nventure.com> wrote in message
> > news:10ibvrnmccno16f@corp.supernews.com...
> > > Its a lot lighter. I don't know if it stronger.
> > >
> > > What is the cost?
> > >
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > Is a titanium brush guard as good/better than stainless steel? It's
> > > > powder-coated, if that makes any difference. The guy here says it's
> > > stronger
> > > > but will it last as long? Will it lose it's appearance, etc?
> > > >
> > > > Thanks!
> > > >
> > > >
> > >
> > >
> >
> >
#15
Guest
Posts: n/a
Re: Titanium Brush Guard?
I agree!
There are some sleaze ball Jeep shops out there that take big advantage
over people that don't know any better!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
c wrote:
>
> Make sure you aren't buying a steel brush guard that is powdercoated with a
> titanium colored powder. This is a pretty common way to make brush guards.
> I'm not sure if I've ever seen one actually made out of titanium, and it
> would no doubt cost much more than the stainless one. Titanium tubing is
> very expensive and quite difficult to weld.
>
> Chris
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:horVc.155253$M95.130262@pd7tw1no...
> > About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> > figure it out ...
> >
> > "Ken" <boxercrazy@nventure.com> wrote in message
> > news:10ibvrnmccno16f@corp.supernews.com...
> > > Its a lot lighter. I don't know if it stronger.
> > >
> > > What is the cost?
> > >
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > Is a titanium brush guard as good/better than stainless steel? It's
> > > > powder-coated, if that makes any difference. The guy here says it's
> > > stronger
> > > > but will it last as long? Will it lose it's appearance, etc?
> > > >
> > > > Thanks!
> > > >
> > > >
> > >
> > >
> >
> >
There are some sleaze ball Jeep shops out there that take big advantage
over people that don't know any better!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
c wrote:
>
> Make sure you aren't buying a steel brush guard that is powdercoated with a
> titanium colored powder. This is a pretty common way to make brush guards.
> I'm not sure if I've ever seen one actually made out of titanium, and it
> would no doubt cost much more than the stainless one. Titanium tubing is
> very expensive and quite difficult to weld.
>
> Chris
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:horVc.155253$M95.130262@pd7tw1no...
> > About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> > figure it out ...
> >
> > "Ken" <boxercrazy@nventure.com> wrote in message
> > news:10ibvrnmccno16f@corp.supernews.com...
> > > Its a lot lighter. I don't know if it stronger.
> > >
> > > What is the cost?
> > >
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > Is a titanium brush guard as good/better than stainless steel? It's
> > > > powder-coated, if that makes any difference. The guy here says it's
> > > stronger
> > > > but will it last as long? Will it lose it's appearance, etc?
> > > >
> > > > Thanks!
> > > >
> > > >
> > >
> > >
> >
> >
#16
Guest
Posts: n/a
Re: Titanium Brush Guard?
I agree!
There are some sleaze ball Jeep shops out there that take big advantage
over people that don't know any better!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
c wrote:
>
> Make sure you aren't buying a steel brush guard that is powdercoated with a
> titanium colored powder. This is a pretty common way to make brush guards.
> I'm not sure if I've ever seen one actually made out of titanium, and it
> would no doubt cost much more than the stainless one. Titanium tubing is
> very expensive and quite difficult to weld.
>
> Chris
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:horVc.155253$M95.130262@pd7tw1no...
> > About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> > figure it out ...
> >
> > "Ken" <boxercrazy@nventure.com> wrote in message
> > news:10ibvrnmccno16f@corp.supernews.com...
> > > Its a lot lighter. I don't know if it stronger.
> > >
> > > What is the cost?
> > >
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > Is a titanium brush guard as good/better than stainless steel? It's
> > > > powder-coated, if that makes any difference. The guy here says it's
> > > stronger
> > > > but will it last as long? Will it lose it's appearance, etc?
> > > >
> > > > Thanks!
> > > >
> > > >
> > >
> > >
> >
> >
There are some sleaze ball Jeep shops out there that take big advantage
over people that don't know any better!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
c wrote:
>
> Make sure you aren't buying a steel brush guard that is powdercoated with a
> titanium colored powder. This is a pretty common way to make brush guards.
> I'm not sure if I've ever seen one actually made out of titanium, and it
> would no doubt cost much more than the stainless one. Titanium tubing is
> very expensive and quite difficult to weld.
>
> Chris
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:horVc.155253$M95.130262@pd7tw1no...
> > About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> > figure it out ...
> >
> > "Ken" <boxercrazy@nventure.com> wrote in message
> > news:10ibvrnmccno16f@corp.supernews.com...
> > > Its a lot lighter. I don't know if it stronger.
> > >
> > > What is the cost?
> > >
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > Is a titanium brush guard as good/better than stainless steel? It's
> > > > powder-coated, if that makes any difference. The guy here says it's
> > > stronger
> > > > but will it last as long? Will it lose it's appearance, etc?
> > > >
> > > > Thanks!
> > > >
> > > >
> > >
> > >
> >
> >
#17
Guest
Posts: n/a
Re: Titanium Brush Guard?
I agree!
There are some sleaze ball Jeep shops out there that take big advantage
over people that don't know any better!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
c wrote:
>
> Make sure you aren't buying a steel brush guard that is powdercoated with a
> titanium colored powder. This is a pretty common way to make brush guards.
> I'm not sure if I've ever seen one actually made out of titanium, and it
> would no doubt cost much more than the stainless one. Titanium tubing is
> very expensive and quite difficult to weld.
>
> Chris
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:horVc.155253$M95.130262@pd7tw1no...
> > About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> > figure it out ...
> >
> > "Ken" <boxercrazy@nventure.com> wrote in message
> > news:10ibvrnmccno16f@corp.supernews.com...
> > > Its a lot lighter. I don't know if it stronger.
> > >
> > > What is the cost?
> > >
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > Is a titanium brush guard as good/better than stainless steel? It's
> > > > powder-coated, if that makes any difference. The guy here says it's
> > > stronger
> > > > but will it last as long? Will it lose it's appearance, etc?
> > > >
> > > > Thanks!
> > > >
> > > >
> > >
> > >
> >
> >
There are some sleaze ball Jeep shops out there that take big advantage
over people that don't know any better!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
c wrote:
>
> Make sure you aren't buying a steel brush guard that is powdercoated with a
> titanium colored powder. This is a pretty common way to make brush guards.
> I'm not sure if I've ever seen one actually made out of titanium, and it
> would no doubt cost much more than the stainless one. Titanium tubing is
> very expensive and quite difficult to weld.
>
> Chris
>
> "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> news:horVc.155253$M95.130262@pd7tw1no...
> > About $250 CDN new here. The Stainless Steel ones are like $400. I can't
> > figure it out ...
> >
> > "Ken" <boxercrazy@nventure.com> wrote in message
> > news:10ibvrnmccno16f@corp.supernews.com...
> > > Its a lot lighter. I don't know if it stronger.
> > >
> > > What is the cost?
> > >
> > >
> > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > Is a titanium brush guard as good/better than stainless steel? It's
> > > > powder-coated, if that makes any difference. The guy here says it's
> > > stronger
> > > > but will it last as long? Will it lose it's appearance, etc?
> > > >
> > > > Thanks!
> > > >
> > > >
> > >
> > >
> >
> >
#18
Guest
Posts: n/a
Re: Titanium Brush Guard?
Ah, you guys are probably right. I know from the fact that titanium bikes
are $4000+ that something didn't seem right. I couldn't see how titanium
would ever be cheaper than SS.
Thanks!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41265BD2.B15A537B@sympatico.ca...
> I agree!
>
> There are some sleaze ball Jeep shops out there that take big advantage
> over people that don't know any better!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> c wrote:
> >
> > Make sure you aren't buying a steel brush guard that is powdercoated
with a
> > titanium colored powder. This is a pretty common way to make brush
guards.
> > I'm not sure if I've ever seen one actually made out of titanium, and it
> > would no doubt cost much more than the stainless one. Titanium tubing is
> > very expensive and quite difficult to weld.
> >
> > Chris
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:horVc.155253$M95.130262@pd7tw1no...
> > > About $250 CDN new here. The Stainless Steel ones are like $400. I
can't
> > > figure it out ...
> > >
> > > "Ken" <boxercrazy@nventure.com> wrote in message
> > > news:10ibvrnmccno16f@corp.supernews.com...
> > > > Its a lot lighter. I don't know if it stronger.
> > > >
> > > > What is the cost?
> > > >
> > > >
> > > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > > Is a titanium brush guard as good/better than stainless steel?
It's
> > > > > powder-coated, if that makes any difference. The guy here says
it's
> > > > stronger
> > > > > but will it last as long? Will it lose it's appearance, etc?
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
are $4000+ that something didn't seem right. I couldn't see how titanium
would ever be cheaper than SS.
Thanks!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41265BD2.B15A537B@sympatico.ca...
> I agree!
>
> There are some sleaze ball Jeep shops out there that take big advantage
> over people that don't know any better!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> c wrote:
> >
> > Make sure you aren't buying a steel brush guard that is powdercoated
with a
> > titanium colored powder. This is a pretty common way to make brush
guards.
> > I'm not sure if I've ever seen one actually made out of titanium, and it
> > would no doubt cost much more than the stainless one. Titanium tubing is
> > very expensive and quite difficult to weld.
> >
> > Chris
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:horVc.155253$M95.130262@pd7tw1no...
> > > About $250 CDN new here. The Stainless Steel ones are like $400. I
can't
> > > figure it out ...
> > >
> > > "Ken" <boxercrazy@nventure.com> wrote in message
> > > news:10ibvrnmccno16f@corp.supernews.com...
> > > > Its a lot lighter. I don't know if it stronger.
> > > >
> > > > What is the cost?
> > > >
> > > >
> > > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > > Is a titanium brush guard as good/better than stainless steel?
It's
> > > > > powder-coated, if that makes any difference. The guy here says
it's
> > > > stronger
> > > > > but will it last as long? Will it lose it's appearance, etc?
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
#19
Guest
Posts: n/a
Re: Titanium Brush Guard?
Ah, you guys are probably right. I know from the fact that titanium bikes
are $4000+ that something didn't seem right. I couldn't see how titanium
would ever be cheaper than SS.
Thanks!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41265BD2.B15A537B@sympatico.ca...
> I agree!
>
> There are some sleaze ball Jeep shops out there that take big advantage
> over people that don't know any better!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> c wrote:
> >
> > Make sure you aren't buying a steel brush guard that is powdercoated
with a
> > titanium colored powder. This is a pretty common way to make brush
guards.
> > I'm not sure if I've ever seen one actually made out of titanium, and it
> > would no doubt cost much more than the stainless one. Titanium tubing is
> > very expensive and quite difficult to weld.
> >
> > Chris
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:horVc.155253$M95.130262@pd7tw1no...
> > > About $250 CDN new here. The Stainless Steel ones are like $400. I
can't
> > > figure it out ...
> > >
> > > "Ken" <boxercrazy@nventure.com> wrote in message
> > > news:10ibvrnmccno16f@corp.supernews.com...
> > > > Its a lot lighter. I don't know if it stronger.
> > > >
> > > > What is the cost?
> > > >
> > > >
> > > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > > Is a titanium brush guard as good/better than stainless steel?
It's
> > > > > powder-coated, if that makes any difference. The guy here says
it's
> > > > stronger
> > > > > but will it last as long? Will it lose it's appearance, etc?
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
are $4000+ that something didn't seem right. I couldn't see how titanium
would ever be cheaper than SS.
Thanks!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41265BD2.B15A537B@sympatico.ca...
> I agree!
>
> There are some sleaze ball Jeep shops out there that take big advantage
> over people that don't know any better!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> c wrote:
> >
> > Make sure you aren't buying a steel brush guard that is powdercoated
with a
> > titanium colored powder. This is a pretty common way to make brush
guards.
> > I'm not sure if I've ever seen one actually made out of titanium, and it
> > would no doubt cost much more than the stainless one. Titanium tubing is
> > very expensive and quite difficult to weld.
> >
> > Chris
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:horVc.155253$M95.130262@pd7tw1no...
> > > About $250 CDN new here. The Stainless Steel ones are like $400. I
can't
> > > figure it out ...
> > >
> > > "Ken" <boxercrazy@nventure.com> wrote in message
> > > news:10ibvrnmccno16f@corp.supernews.com...
> > > > Its a lot lighter. I don't know if it stronger.
> > > >
> > > > What is the cost?
> > > >
> > > >
> > > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > > Is a titanium brush guard as good/better than stainless steel?
It's
> > > > > powder-coated, if that makes any difference. The guy here says
it's
> > > > stronger
> > > > > but will it last as long? Will it lose it's appearance, etc?
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
#20
Guest
Posts: n/a
Re: Titanium Brush Guard?
Ah, you guys are probably right. I know from the fact that titanium bikes
are $4000+ that something didn't seem right. I couldn't see how titanium
would ever be cheaper than SS.
Thanks!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41265BD2.B15A537B@sympatico.ca...
> I agree!
>
> There are some sleaze ball Jeep shops out there that take big advantage
> over people that don't know any better!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> c wrote:
> >
> > Make sure you aren't buying a steel brush guard that is powdercoated
with a
> > titanium colored powder. This is a pretty common way to make brush
guards.
> > I'm not sure if I've ever seen one actually made out of titanium, and it
> > would no doubt cost much more than the stainless one. Titanium tubing is
> > very expensive and quite difficult to weld.
> >
> > Chris
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:horVc.155253$M95.130262@pd7tw1no...
> > > About $250 CDN new here. The Stainless Steel ones are like $400. I
can't
> > > figure it out ...
> > >
> > > "Ken" <boxercrazy@nventure.com> wrote in message
> > > news:10ibvrnmccno16f@corp.supernews.com...
> > > > Its a lot lighter. I don't know if it stronger.
> > > >
> > > > What is the cost?
> > > >
> > > >
> > > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > > Is a titanium brush guard as good/better than stainless steel?
It's
> > > > > powder-coated, if that makes any difference. The guy here says
it's
> > > > stronger
> > > > > but will it last as long? Will it lose it's appearance, etc?
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
are $4000+ that something didn't seem right. I couldn't see how titanium
would ever be cheaper than SS.
Thanks!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41265BD2.B15A537B@sympatico.ca...
> I agree!
>
> There are some sleaze ball Jeep shops out there that take big advantage
> over people that don't know any better!
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> c wrote:
> >
> > Make sure you aren't buying a steel brush guard that is powdercoated
with a
> > titanium colored powder. This is a pretty common way to make brush
guards.
> > I'm not sure if I've ever seen one actually made out of titanium, and it
> > would no doubt cost much more than the stainless one. Titanium tubing is
> > very expensive and quite difficult to weld.
> >
> > Chris
> >
> > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > news:horVc.155253$M95.130262@pd7tw1no...
> > > About $250 CDN new here. The Stainless Steel ones are like $400. I
can't
> > > figure it out ...
> > >
> > > "Ken" <boxercrazy@nventure.com> wrote in message
> > > news:10ibvrnmccno16f@corp.supernews.com...
> > > > Its a lot lighter. I don't know if it stronger.
> > > >
> > > > What is the cost?
> > > >
> > > >
> > > > "griffin" <gryffy@DELTHISshaw.ca> wrote in message
> > > > news:ZTmVc.160553$J06.3530@pd7tw2no...
> > > > > Is a titanium brush guard as good/better than stainless steel?
It's
> > > > > powder-coated, if that makes any difference. The guy here says
it's
> > > > stronger
> > > > > but will it last as long? Will it lose it's appearance, etc?
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >