Tire Size
#11
Guest
Posts: n/a
Re: Tire Size
Yup: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Ben wrote:
>
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
God Bless America, ßill O|||||||O
mailto:--------------------
Ben wrote:
>
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
#12
Guest
Posts: n/a
Re: Tire Size
Yup: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Ben wrote:
>
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
God Bless America, ßill O|||||||O
mailto:--------------------
Ben wrote:
>
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
#13
Guest
Posts: n/a
Re: Tire Size
Yup: http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
Ben wrote:
>
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
God Bless America, ßill O|||||||O
mailto:--------------------
Ben wrote:
>
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
#14
Guest
Posts: n/a
Re: Tire Size
The D30 can be made to last, the D35 is best tossed into a scrap pile. I've
recommended Dana build them and immediately take them to the junk yard,
bypassing the "curse" they place on any vehicle they're installed on.
Chrysler saves about $50 a vehicle fitting them rather than the D44 to the
TJ, then they charge about $500 for the D44 option. Caveat Emptor!!!
"Ben" <ben2112@earthlink.net> wrote in message
news:1090eslt4oq5n8c@corp.supernews.com...
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40902F7E.443CFA4@***.net...
> > 31X10.50: http://----------.com/tireSizeFit.pdf That's what my
> > Brother-in-law uses, your top speed will be reduced from about 95 to 80
> > tops: http://home.att.net/~taschers/index.html
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > Ben wrote:
> > >
> > > What are the largest tires I could run on a 95 YJ with a 2in lift?
> > >
> > > Thanks,
> > > Ben
> > > 95 YJ 2.5L
> > >
> > > P.S. Are there any good mods for the 2.5L? I really don't have the
funds
> to
> > > drop in a different motor..
>
>
recommended Dana build them and immediately take them to the junk yard,
bypassing the "curse" they place on any vehicle they're installed on.
Chrysler saves about $50 a vehicle fitting them rather than the D44 to the
TJ, then they charge about $500 for the D44 option. Caveat Emptor!!!
"Ben" <ben2112@earthlink.net> wrote in message
news:1090eslt4oq5n8c@corp.supernews.com...
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40902F7E.443CFA4@***.net...
> > 31X10.50: http://----------.com/tireSizeFit.pdf That's what my
> > Brother-in-law uses, your top speed will be reduced from about 95 to 80
> > tops: http://home.att.net/~taschers/index.html
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > Ben wrote:
> > >
> > > What are the largest tires I could run on a 95 YJ with a 2in lift?
> > >
> > > Thanks,
> > > Ben
> > > 95 YJ 2.5L
> > >
> > > P.S. Are there any good mods for the 2.5L? I really don't have the
funds
> to
> > > drop in a different motor..
>
>
#15
Guest
Posts: n/a
Re: Tire Size
The D30 can be made to last, the D35 is best tossed into a scrap pile. I've
recommended Dana build them and immediately take them to the junk yard,
bypassing the "curse" they place on any vehicle they're installed on.
Chrysler saves about $50 a vehicle fitting them rather than the D44 to the
TJ, then they charge about $500 for the D44 option. Caveat Emptor!!!
"Ben" <ben2112@earthlink.net> wrote in message
news:1090eslt4oq5n8c@corp.supernews.com...
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40902F7E.443CFA4@***.net...
> > 31X10.50: http://----------.com/tireSizeFit.pdf That's what my
> > Brother-in-law uses, your top speed will be reduced from about 95 to 80
> > tops: http://home.att.net/~taschers/index.html
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > Ben wrote:
> > >
> > > What are the largest tires I could run on a 95 YJ with a 2in lift?
> > >
> > > Thanks,
> > > Ben
> > > 95 YJ 2.5L
> > >
> > > P.S. Are there any good mods for the 2.5L? I really don't have the
funds
> to
> > > drop in a different motor..
>
>
recommended Dana build them and immediately take them to the junk yard,
bypassing the "curse" they place on any vehicle they're installed on.
Chrysler saves about $50 a vehicle fitting them rather than the D44 to the
TJ, then they charge about $500 for the D44 option. Caveat Emptor!!!
"Ben" <ben2112@earthlink.net> wrote in message
news:1090eslt4oq5n8c@corp.supernews.com...
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40902F7E.443CFA4@***.net...
> > 31X10.50: http://----------.com/tireSizeFit.pdf That's what my
> > Brother-in-law uses, your top speed will be reduced from about 95 to 80
> > tops: http://home.att.net/~taschers/index.html
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > Ben wrote:
> > >
> > > What are the largest tires I could run on a 95 YJ with a 2in lift?
> > >
> > > Thanks,
> > > Ben
> > > 95 YJ 2.5L
> > >
> > > P.S. Are there any good mods for the 2.5L? I really don't have the
funds
> to
> > > drop in a different motor..
>
>
#16
Guest
Posts: n/a
Re: Tire Size
The D30 can be made to last, the D35 is best tossed into a scrap pile. I've
recommended Dana build them and immediately take them to the junk yard,
bypassing the "curse" they place on any vehicle they're installed on.
Chrysler saves about $50 a vehicle fitting them rather than the D44 to the
TJ, then they charge about $500 for the D44 option. Caveat Emptor!!!
"Ben" <ben2112@earthlink.net> wrote in message
news:1090eslt4oq5n8c@corp.supernews.com...
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40902F7E.443CFA4@***.net...
> > 31X10.50: http://----------.com/tireSizeFit.pdf That's what my
> > Brother-in-law uses, your top speed will be reduced from about 95 to 80
> > tops: http://home.att.net/~taschers/index.html
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > Ben wrote:
> > >
> > > What are the largest tires I could run on a 95 YJ with a 2in lift?
> > >
> > > Thanks,
> > > Ben
> > > 95 YJ 2.5L
> > >
> > > P.S. Are there any good mods for the 2.5L? I really don't have the
funds
> to
> > > drop in a different motor..
>
>
recommended Dana build them and immediately take them to the junk yard,
bypassing the "curse" they place on any vehicle they're installed on.
Chrysler saves about $50 a vehicle fitting them rather than the D44 to the
TJ, then they charge about $500 for the D44 option. Caveat Emptor!!!
"Ben" <ben2112@earthlink.net> wrote in message
news:1090eslt4oq5n8c@corp.supernews.com...
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40902F7E.443CFA4@***.net...
> > 31X10.50: http://----------.com/tireSizeFit.pdf That's what my
> > Brother-in-law uses, your top speed will be reduced from about 95 to 80
> > tops: http://home.att.net/~taschers/index.html
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > Ben wrote:
> > >
> > > What are the largest tires I could run on a 95 YJ with a 2in lift?
> > >
> > > Thanks,
> > > Ben
> > > 95 YJ 2.5L
> > >
> > > P.S. Are there any good mods for the 2.5L? I really don't have the
funds
> to
> > > drop in a different motor..
>
>
#17
Guest
Posts: n/a
Re: Tire Size
The D30 can be made to last, the D35 is best tossed into a scrap pile. I've
recommended Dana build them and immediately take them to the junk yard,
bypassing the "curse" they place on any vehicle they're installed on.
Chrysler saves about $50 a vehicle fitting them rather than the D44 to the
TJ, then they charge about $500 for the D44 option. Caveat Emptor!!!
"Ben" <ben2112@earthlink.net> wrote in message
news:1090eslt4oq5n8c@corp.supernews.com...
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40902F7E.443CFA4@***.net...
> > 31X10.50: http://----------.com/tireSizeFit.pdf That's what my
> > Brother-in-law uses, your top speed will be reduced from about 95 to 80
> > tops: http://home.att.net/~taschers/index.html
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > Ben wrote:
> > >
> > > What are the largest tires I could run on a 95 YJ with a 2in lift?
> > >
> > > Thanks,
> > > Ben
> > > 95 YJ 2.5L
> > >
> > > P.S. Are there any good mods for the 2.5L? I really don't have the
funds
> to
> > > drop in a different motor..
>
>
recommended Dana build them and immediately take them to the junk yard,
bypassing the "curse" they place on any vehicle they're installed on.
Chrysler saves about $50 a vehicle fitting them rather than the D44 to the
TJ, then they charge about $500 for the D44 option. Caveat Emptor!!!
"Ben" <ben2112@earthlink.net> wrote in message
news:1090eslt4oq5n8c@corp.supernews.com...
> Thanks.. I have heard that even if I wanted to go higher on the lift and
> bigger tires.. I would have to change out the rear and front axles because
> of the limitations of the Dana 35 and Dana 30 diffs..
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40902F7E.443CFA4@***.net...
> > 31X10.50: http://----------.com/tireSizeFit.pdf That's what my
> > Brother-in-law uses, your top speed will be reduced from about 95 to 80
> > tops: http://home.att.net/~taschers/index.html
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > Ben wrote:
> > >
> > > What are the largest tires I could run on a 95 YJ with a 2in lift?
> > >
> > > Thanks,
> > > Ben
> > > 95 YJ 2.5L
> > >
> > > P.S. Are there any good mods for the 2.5L? I really don't have the
funds
> to
> > > drop in a different motor..
>
>
#18
Guest
Posts: n/a
Re: Tire Size
http://www.----------.com/dana35c/1192003203118.jpg
this ones always been my favorite for using what ya got to get to ashphalt!
oh..by the way...LEAFS WON!!! wah ha ha ha
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:409042F2.161B5F21@***.net...
> Yup: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Ben wrote:
> >
> > Thanks.. I have heard that even if I wanted to go higher on the lift
and
> > bigger tires.. I would have to change out the rear and front axles
because
> > of the limitations of the Dana 35 and Dana 30 diffs..
this ones always been my favorite for using what ya got to get to ashphalt!
oh..by the way...LEAFS WON!!! wah ha ha ha
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:409042F2.161B5F21@***.net...
> Yup: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Ben wrote:
> >
> > Thanks.. I have heard that even if I wanted to go higher on the lift
and
> > bigger tires.. I would have to change out the rear and front axles
because
> > of the limitations of the Dana 35 and Dana 30 diffs..
#19
Guest
Posts: n/a
Re: Tire Size
http://www.----------.com/dana35c/1192003203118.jpg
this ones always been my favorite for using what ya got to get to ashphalt!
oh..by the way...LEAFS WON!!! wah ha ha ha
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:409042F2.161B5F21@***.net...
> Yup: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Ben wrote:
> >
> > Thanks.. I have heard that even if I wanted to go higher on the lift
and
> > bigger tires.. I would have to change out the rear and front axles
because
> > of the limitations of the Dana 35 and Dana 30 diffs..
this ones always been my favorite for using what ya got to get to ashphalt!
oh..by the way...LEAFS WON!!! wah ha ha ha
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:409042F2.161B5F21@***.net...
> Yup: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Ben wrote:
> >
> > Thanks.. I have heard that even if I wanted to go higher on the lift
and
> > bigger tires.. I would have to change out the rear and front axles
because
> > of the limitations of the Dana 35 and Dana 30 diffs..
#20
Guest
Posts: n/a
Re: Tire Size
http://www.----------.com/dana35c/1192003203118.jpg
this ones always been my favorite for using what ya got to get to ashphalt!
oh..by the way...LEAFS WON!!! wah ha ha ha
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:409042F2.161B5F21@***.net...
> Yup: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Ben wrote:
> >
> > Thanks.. I have heard that even if I wanted to go higher on the lift
and
> > bigger tires.. I would have to change out the rear and front axles
because
> > of the limitations of the Dana 35 and Dana 30 diffs..
this ones always been my favorite for using what ya got to get to ashphalt!
oh..by the way...LEAFS WON!!! wah ha ha ha
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:409042F2.161B5F21@***.net...
> Yup: http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Ben wrote:
> >
> > Thanks.. I have heard that even if I wanted to go higher on the lift
and
> > bigger tires.. I would have to change out the rear and front axles
because
> > of the limitations of the Dana 35 and Dana 30 diffs..