tin pan for 304 intake.
08-03-2004, 07:53 AM
#1
Guest
Posts: n/a
tin pan for 304 intake.
I need the tin pan that is mounted to the underside of a stock 304 intake on
a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
the valley pan gasket, its screwed into the bottom side of a stock intake) I
am building a 304 and just bought a edelbrock performer intake only to find
out that I need this part from the original intake, which I don't have.
email me at if you have one you want to sell - thanks.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
the valley pan gasket, its screwed into the bottom side of a stock intake) I
am building a 304 and just bought a edelbrock performer intake only to find
out that I need this part from the original intake, which I don't have.
email me at if you have one you want to sell - thanks.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
08-03-2004, 08:59 AM
#2
Guest
Posts: n/a
Re: tin pan for 304 intake.
Will one from a 360 work?
later,
dave AKA vwdoc1
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2n9cmbFurh7hU1@uni-berlin.de...
> I need the tin pan that is mounted to the underside of a stock 304 intake
on
> a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
> the valley pan gasket, its screwed into the bottom side of a stock intake)
I
> am building a 304 and just bought a edelbrock performer intake only to
find
> out that I need this part from the original intake, which I don't have.
> email me at if you have one you want to sell - thanks.
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
later,
dave AKA vwdoc1
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2n9cmbFurh7hU1@uni-berlin.de...
> I need the tin pan that is mounted to the underside of a stock 304 intake
on
> a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
> the valley pan gasket, its screwed into the bottom side of a stock intake)
I
> am building a 304 and just bought a edelbrock performer intake only to
find
> out that I need this part from the original intake, which I don't have.
> email me at if you have one you want to sell - thanks.
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
08-03-2004, 08:59 AM
#3
Guest
Posts: n/a
Re: tin pan for 304 intake.
Will one from a 360 work?
later,
dave AKA vwdoc1
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2n9cmbFurh7hU1@uni-berlin.de...
> I need the tin pan that is mounted to the underside of a stock 304 intake
on
> a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
> the valley pan gasket, its screwed into the bottom side of a stock intake)
I
> am building a 304 and just bought a edelbrock performer intake only to
find
> out that I need this part from the original intake, which I don't have.
> email me at if you have one you want to sell - thanks.
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
later,
dave AKA vwdoc1
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2n9cmbFurh7hU1@uni-berlin.de...
> I need the tin pan that is mounted to the underside of a stock 304 intake
on
> a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
> the valley pan gasket, its screwed into the bottom side of a stock intake)
I
> am building a 304 and just bought a edelbrock performer intake only to
find
> out that I need this part from the original intake, which I don't have.
> email me at if you have one you want to sell - thanks.
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
08-03-2004, 08:59 AM
#4
Guest
Posts: n/a
Re: tin pan for 304 intake.
Will one from a 360 work?
later,
dave AKA vwdoc1
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2n9cmbFurh7hU1@uni-berlin.de...
> I need the tin pan that is mounted to the underside of a stock 304 intake
on
> a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
> the valley pan gasket, its screwed into the bottom side of a stock intake)
I
> am building a 304 and just bought a edelbrock performer intake only to
find
> out that I need this part from the original intake, which I don't have.
> email me at if you have one you want to sell - thanks.
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
later,
dave AKA vwdoc1
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2n9cmbFurh7hU1@uni-berlin.de...
> I need the tin pan that is mounted to the underside of a stock 304 intake
on
> a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
> the valley pan gasket, its screwed into the bottom side of a stock intake)
I
> am building a 304 and just bought a edelbrock performer intake only to
find
> out that I need this part from the original intake, which I don't have.
> email me at if you have one you want to sell - thanks.
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
08-03-2004, 08:59 AM
#5
Guest
Posts: n/a
Re: tin pan for 304 intake.
Will one from a 360 work?
later,
dave AKA vwdoc1
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2n9cmbFurh7hU1@uni-berlin.de...
> I need the tin pan that is mounted to the underside of a stock 304 intake
on
> a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
> the valley pan gasket, its screwed into the bottom side of a stock intake)
I
> am building a 304 and just bought a edelbrock performer intake only to
find
> out that I need this part from the original intake, which I don't have.
> email me at if you have one you want to sell - thanks.
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
later,
dave AKA vwdoc1
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2n9cmbFurh7hU1@uni-berlin.de...
> I need the tin pan that is mounted to the underside of a stock 304 intake
on
> a AMC v8. I think it is some kind of heat shield, but not sure. (it's not
> the valley pan gasket, its screwed into the bottom side of a stock intake)
I
> am building a 304 and just bought a edelbrock performer intake only to
find
> out that I need this part from the original intake, which I don't have.
> email me at if you have one you want to sell - thanks.
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
08-03-2004, 10:42 AM
#6
Guest
Posts: n/a
Re: tin pan for 304 intake.
Are you talking about this?
http://ameritech.net/users/vwdoc2001...rayClean01.jpg
"dave" <vwdoc1@NOSPAMhotmail.com> wrote in message
news:L_LPc.2529$hI.827500@newssvr28.news.prodigy.c om...
> Will one from a 360 work?
> later,
> dave AKA vwdoc1
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2n9cmbFurh7hU1@uni-berlin.de...
> > I need the tin pan that is mounted to the underside of a stock 304
intake
> on
> > a AMC v8. I think it is some kind of heat shield, but not sure. (it's
not
> > the valley pan gasket, its screwed into the bottom side of a stock
intake)
> I
> > am building a 304 and just bought a edelbrock performer intake only to
> find
> > out that I need this part from the original intake, which I don't have.
> > email me at if you have one you want to sell - thanks.
> >
> > --
> > _____________________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
>
>
http://ameritech.net/users/vwdoc2001...rayClean01.jpg
"dave" <vwdoc1@NOSPAMhotmail.com> wrote in message
news:L_LPc.2529$hI.827500@newssvr28.news.prodigy.c om...
> Will one from a 360 work?
> later,
> dave AKA vwdoc1
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2n9cmbFurh7hU1@uni-berlin.de...
> > I need the tin pan that is mounted to the underside of a stock 304
intake
> on
> > a AMC v8. I think it is some kind of heat shield, but not sure. (it's
not
> > the valley pan gasket, its screwed into the bottom side of a stock
intake)
> I
> > am building a 304 and just bought a edelbrock performer intake only to
> find
> > out that I need this part from the original intake, which I don't have.
> > email me at if you have one you want to sell - thanks.
> >
> > --
> > _____________________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
>
>
08-03-2004, 10:42 AM
#7
Guest
Posts: n/a
Re: tin pan for 304 intake.
Are you talking about this?
http://ameritech.net/users/vwdoc2001...rayClean01.jpg
"dave" <vwdoc1@NOSPAMhotmail.com> wrote in message
news:L_LPc.2529$hI.827500@newssvr28.news.prodigy.c om...
> Will one from a 360 work?
> later,
> dave AKA vwdoc1
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2n9cmbFurh7hU1@uni-berlin.de...
> > I need the tin pan that is mounted to the underside of a stock 304
intake
> on
> > a AMC v8. I think it is some kind of heat shield, but not sure. (it's
not
> > the valley pan gasket, its screwed into the bottom side of a stock
intake)
> I
> > am building a 304 and just bought a edelbrock performer intake only to
> find
> > out that I need this part from the original intake, which I don't have.
> > email me at if you have one you want to sell - thanks.
> >
> > --
> > _____________________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
>
>
http://ameritech.net/users/vwdoc2001...rayClean01.jpg
"dave" <vwdoc1@NOSPAMhotmail.com> wrote in message
news:L_LPc.2529$hI.827500@newssvr28.news.prodigy.c om...
> Will one from a 360 work?
> later,
> dave AKA vwdoc1
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2n9cmbFurh7hU1@uni-berlin.de...
> > I need the tin pan that is mounted to the underside of a stock 304
intake
> on
> > a AMC v8. I think it is some kind of heat shield, but not sure. (it's
not
> > the valley pan gasket, its screwed into the bottom side of a stock
intake)
> I
> > am building a 304 and just bought a edelbrock performer intake only to
> find
> > out that I need this part from the original intake, which I don't have.
> > email me at if you have one you want to sell - thanks.
> >
> > --
> > _____________________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
>
>
08-03-2004, 10:42 AM
#8
Guest
Posts: n/a
Re: tin pan for 304 intake.
Are you talking about this?
http://ameritech.net/users/vwdoc2001...rayClean01.jpg
"dave" <vwdoc1@NOSPAMhotmail.com> wrote in message
news:L_LPc.2529$hI.827500@newssvr28.news.prodigy.c om...
> Will one from a 360 work?
> later,
> dave AKA vwdoc1
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2n9cmbFurh7hU1@uni-berlin.de...
> > I need the tin pan that is mounted to the underside of a stock 304
intake
> on
> > a AMC v8. I think it is some kind of heat shield, but not sure. (it's
not
> > the valley pan gasket, its screwed into the bottom side of a stock
intake)
> I
> > am building a 304 and just bought a edelbrock performer intake only to
> find
> > out that I need this part from the original intake, which I don't have.
> > email me at if you have one you want to sell - thanks.
> >
> > --
> > _____________________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
>
>
http://ameritech.net/users/vwdoc2001...rayClean01.jpg
"dave" <vwdoc1@NOSPAMhotmail.com> wrote in message
news:L_LPc.2529$hI.827500@newssvr28.news.prodigy.c om...
> Will one from a 360 work?
> later,
> dave AKA vwdoc1
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2n9cmbFurh7hU1@uni-berlin.de...
> > I need the tin pan that is mounted to the underside of a stock 304
intake
> on
> > a AMC v8. I think it is some kind of heat shield, but not sure. (it's
not
> > the valley pan gasket, its screwed into the bottom side of a stock
intake)
> I
> > am building a 304 and just bought a edelbrock performer intake only to
> find
> > out that I need this part from the original intake, which I don't have.
> > email me at if you have one you want to sell - thanks.
> >
> > --
> > _____________________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
>
>
08-03-2004, 10:42 AM
#9
Guest
Posts: n/a
Re: tin pan for 304 intake.
Are you talking about this?
http://ameritech.net/users/vwdoc2001...rayClean01.jpg
"dave" <vwdoc1@NOSPAMhotmail.com> wrote in message
news:L_LPc.2529$hI.827500@newssvr28.news.prodigy.c om...
> Will one from a 360 work?
> later,
> dave AKA vwdoc1
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2n9cmbFurh7hU1@uni-berlin.de...
> > I need the tin pan that is mounted to the underside of a stock 304
intake
> on
> > a AMC v8. I think it is some kind of heat shield, but not sure. (it's
not
> > the valley pan gasket, its screwed into the bottom side of a stock
intake)
> I
> > am building a 304 and just bought a edelbrock performer intake only to
> find
> > out that I need this part from the original intake, which I don't have.
> > email me at if you have one you want to sell - thanks.
> >
> > --
> > _____________________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
>
>
http://ameritech.net/users/vwdoc2001...rayClean01.jpg
"dave" <vwdoc1@NOSPAMhotmail.com> wrote in message
news:L_LPc.2529$hI.827500@newssvr28.news.prodigy.c om...
> Will one from a 360 work?
> later,
> dave AKA vwdoc1
>
> "HomeBrewer" <85cj7XXX@***.net> wrote in message
> news:2n9cmbFurh7hU1@uni-berlin.de...
> > I need the tin pan that is mounted to the underside of a stock 304
intake
> on
> > a AMC v8. I think it is some kind of heat shield, but not sure. (it's
not
> > the valley pan gasket, its screwed into the bottom side of a stock
intake)
> I
> > am building a 304 and just bought a edelbrock performer intake only to
> find
> > out that I need this part from the original intake, which I don't have.
> > email me at if you have one you want to sell - thanks.
> >
> > --
> > _____________________
> > HomeBrewer
> > 85CJ7 (in Progress)
> > http://85cj7.blogspot.com/
> > 99XJ Sport
> > Remove the xxx to reply!
> >
> >
>
>
08-03-2004, 12:45 PM
#10
Guest
Posts: n/a
Re: tin pan for 304 intake.
You have it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
dave wrote:
>
> Are you talking about this?
> http://ameritech.net/users/vwdoc2001...rayClean01.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
dave wrote:
>
> Are you talking about this?
> http://ameritech.net/users/vwdoc2001...rayClean01.jpg
