Tin-knocking question
04-15-2006, 07:16 PM
#2
Guest
Posts: n/a
Re: Tin-knocking question
If there are no sharp creases you may be able to just 'pop' the depression
out.
Kate and 'Mr. Kate' used to have a body shop, send her a note...
"Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
news:e1rprg$r4r$1@reader1.panix.com...
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
out.
Kate and 'Mr. Kate' used to have a body shop, send her a note...
"Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
news:e1rprg$r4r$1@reader1.panix.com...
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
04-15-2006, 07:16 PM
#3
Guest
Posts: n/a
Re: Tin-knocking question
If there are no sharp creases you may be able to just 'pop' the depression
out.
Kate and 'Mr. Kate' used to have a body shop, send her a note...
"Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
news:e1rprg$r4r$1@reader1.panix.com...
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
out.
Kate and 'Mr. Kate' used to have a body shop, send her a note...
"Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
news:e1rprg$r4r$1@reader1.panix.com...
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
04-15-2006, 07:16 PM
#4
Guest
Posts: n/a
Re: Tin-knocking question
If there are no sharp creases you may be able to just 'pop' the depression
out.
Kate and 'Mr. Kate' used to have a body shop, send her a note...
"Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
news:e1rprg$r4r$1@reader1.panix.com...
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
out.
Kate and 'Mr. Kate' used to have a body shop, send her a note...
"Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
news:e1rprg$r4r$1@reader1.panix.com...
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
04-15-2006, 07:21 PM
#5
Guest
Posts: n/a
Re: Tin-knocking question
Uhhhhh...
that was the previous Mr. Kate, not the current one.
but I could ask PMK if ya want me to
and YOU Billy Ray... are gonna get it.
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:50f79$44417eae$4831b233$27030@FUSE.NET...
: If there are no sharp creases you may be able to just 'pop' the depression
: out.
:
: Kate and 'Mr. Kate' used to have a body shop, send her a note...
:
: "Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
: news:e1rprg$r4r$1@reader1.panix.com...
: >
: >
: > I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
: > caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
: > Before I attempt something and make it worse, what is the best way to
: > pop this back out?
: >
: >
:
:
that was the previous Mr. Kate, not the current one.
but I could ask PMK if ya want me to
and YOU Billy Ray... are gonna get it.
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:50f79$44417eae$4831b233$27030@FUSE.NET...
: If there are no sharp creases you may be able to just 'pop' the depression
: out.
:
: Kate and 'Mr. Kate' used to have a body shop, send her a note...
:
: "Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
: news:e1rprg$r4r$1@reader1.panix.com...
: >
: >
: > I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
: > caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
: > Before I attempt something and make it worse, what is the best way to
: > pop this back out?
: >
: >
:
:
04-15-2006, 07:21 PM
#6
Guest
Posts: n/a
Re: Tin-knocking question
Uhhhhh...
that was the previous Mr. Kate, not the current one.
but I could ask PMK if ya want me to
and YOU Billy Ray... are gonna get it.
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:50f79$44417eae$4831b233$27030@FUSE.NET...
: If there are no sharp creases you may be able to just 'pop' the depression
: out.
:
: Kate and 'Mr. Kate' used to have a body shop, send her a note...
:
: "Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
: news:e1rprg$r4r$1@reader1.panix.com...
: >
: >
: > I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
: > caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
: > Before I attempt something and make it worse, what is the best way to
: > pop this back out?
: >
: >
:
:
that was the previous Mr. Kate, not the current one.
but I could ask PMK if ya want me to
and YOU Billy Ray... are gonna get it.
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:50f79$44417eae$4831b233$27030@FUSE.NET...
: If there are no sharp creases you may be able to just 'pop' the depression
: out.
:
: Kate and 'Mr. Kate' used to have a body shop, send her a note...
:
: "Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
: news:e1rprg$r4r$1@reader1.panix.com...
: >
: >
: > I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
: > caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
: > Before I attempt something and make it worse, what is the best way to
: > pop this back out?
: >
: >
:
:
04-15-2006, 07:21 PM
#7
Guest
Posts: n/a
Re: Tin-knocking question
Uhhhhh...
that was the previous Mr. Kate, not the current one.
but I could ask PMK if ya want me to
and YOU Billy Ray... are gonna get it.
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:50f79$44417eae$4831b233$27030@FUSE.NET...
: If there are no sharp creases you may be able to just 'pop' the depression
: out.
:
: Kate and 'Mr. Kate' used to have a body shop, send her a note...
:
: "Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
: news:e1rprg$r4r$1@reader1.panix.com...
: >
: >
: > I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
: > caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
: > Before I attempt something and make it worse, what is the best way to
: > pop this back out?
: >
: >
:
:
that was the previous Mr. Kate, not the current one.
but I could ask PMK if ya want me to
and YOU Billy Ray... are gonna get it.
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:50f79$44417eae$4831b233$27030@FUSE.NET...
: If there are no sharp creases you may be able to just 'pop' the depression
: out.
:
: Kate and 'Mr. Kate' used to have a body shop, send her a note...
:
: "Lee Ayrton" <layrton@REMOVE_ME.panix.com> wrote in message
: news:e1rprg$r4r$1@reader1.panix.com...
: >
: >
: > I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
: > caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
: > Before I attempt something and make it worse, what is the best way to
: > pop this back out?
: >
: >
:
:
04-15-2006, 07:50 PM
#8
Guest
Posts: n/a
Re: Tin-knocking question
Off the wall idea but you might try a chunk of dry ice.
Jeff DeWitt (when it comes to off the wall ideas I'm full of it!)
Lee Ayrton wrote:
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
Jeff DeWitt (when it comes to off the wall ideas I'm full of it!)
Lee Ayrton wrote:
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
04-15-2006, 07:50 PM
#9
Guest
Posts: n/a
Re: Tin-knocking question
Off the wall idea but you might try a chunk of dry ice.
Jeff DeWitt (when it comes to off the wall ideas I'm full of it!)
Lee Ayrton wrote:
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
Jeff DeWitt (when it comes to off the wall ideas I'm full of it!)
Lee Ayrton wrote:
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
04-15-2006, 07:50 PM
#10
Guest
Posts: n/a
Re: Tin-knocking question
Off the wall idea but you might try a chunk of dry ice.
Jeff DeWitt (when it comes to off the wall ideas I'm full of it!)
Lee Ayrton wrote:
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
Jeff DeWitt (when it comes to off the wall ideas I'm full of it!)
Lee Ayrton wrote:
>
>
> I've got a `51 ****** 4x4 pickup cab sitting in my garage with a
> caved-in roof. The dent is perhaps 2'x 1 1/2', and about 3" deep.
> Before I attempt something and make it worse, what is the best way to
> pop this back out?
>
>
