Timing Chain Questions
04-10-2005, 11:01 PM
#1
Guest
Posts: n/a
Timing Chain Questions
Well I went and took the timing chain cover off and noticed that the
tensioner was unlocked and the chain, altho it sure looks new, has quite a
bit of slack (.5-1" when there is no built up pressure) even when it is
locked. I'm guessing it's a good idea to replace the chain as it might have
been the source of my problems? Also, the sprockets are razor sharp ...I've
heard that they should be somewhat dull. Should I replace them as well? Any
tips or tricks for this next step? Thanks!
tensioner was unlocked and the chain, altho it sure looks new, has quite a
bit of slack (.5-1" when there is no built up pressure) even when it is
locked. I'm guessing it's a good idea to replace the chain as it might have
been the source of my problems? Also, the sprockets are razor sharp ...I've
heard that they should be somewhat dull. Should I replace them as well? Any
tips or tricks for this next step? Thanks!
04-11-2005, 12:09 AM
#2
Guest
Posts: n/a
Re: Timing Chain Questions
Even though the chain and sprockets are sold separately, we replace
them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
griffin wrote:
>
> Well I went and took the timing chain cover off and noticed that the
> tensioner was unlocked and the chain, altho it sure looks new, has quite a
> bit of slack (.5-1" when there is no built up pressure) even when it is
> locked. I'm guessing it's a good idea to replace the chain as it might have
> been the source of my problems? Also, the sprockets are razor sharp ...I've
> heard that they should be somewhat dull. Should I replace them as well? Any
> tips or tricks for this next step? Thanks!
them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
griffin wrote:
>
> Well I went and took the timing chain cover off and noticed that the
> tensioner was unlocked and the chain, altho it sure looks new, has quite a
> bit of slack (.5-1" when there is no built up pressure) even when it is
> locked. I'm guessing it's a good idea to replace the chain as it might have
> been the source of my problems? Also, the sprockets are razor sharp ...I've
> heard that they should be somewhat dull. Should I replace them as well? Any
> tips or tricks for this next step? Thanks!
04-11-2005, 12:09 AM
#3
Guest
Posts: n/a
Re: Timing Chain Questions
Even though the chain and sprockets are sold separately, we replace
them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
griffin wrote:
>
> Well I went and took the timing chain cover off and noticed that the
> tensioner was unlocked and the chain, altho it sure looks new, has quite a
> bit of slack (.5-1" when there is no built up pressure) even when it is
> locked. I'm guessing it's a good idea to replace the chain as it might have
> been the source of my problems? Also, the sprockets are razor sharp ...I've
> heard that they should be somewhat dull. Should I replace them as well? Any
> tips or tricks for this next step? Thanks!
them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
griffin wrote:
>
> Well I went and took the timing chain cover off and noticed that the
> tensioner was unlocked and the chain, altho it sure looks new, has quite a
> bit of slack (.5-1" when there is no built up pressure) even when it is
> locked. I'm guessing it's a good idea to replace the chain as it might have
> been the source of my problems? Also, the sprockets are razor sharp ...I've
> heard that they should be somewhat dull. Should I replace them as well? Any
> tips or tricks for this next step? Thanks!
04-11-2005, 12:09 AM
#4
Guest
Posts: n/a
Re: Timing Chain Questions
Even though the chain and sprockets are sold separately, we replace
them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
griffin wrote:
>
> Well I went and took the timing chain cover off and noticed that the
> tensioner was unlocked and the chain, altho it sure looks new, has quite a
> bit of slack (.5-1" when there is no built up pressure) even when it is
> locked. I'm guessing it's a good idea to replace the chain as it might have
> been the source of my problems? Also, the sprockets are razor sharp ...I've
> heard that they should be somewhat dull. Should I replace them as well? Any
> tips or tricks for this next step? Thanks!
them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
griffin wrote:
>
> Well I went and took the timing chain cover off and noticed that the
> tensioner was unlocked and the chain, altho it sure looks new, has quite a
> bit of slack (.5-1" when there is no built up pressure) even when it is
> locked. I'm guessing it's a good idea to replace the chain as it might have
> been the source of my problems? Also, the sprockets are razor sharp ...I've
> heard that they should be somewhat dull. Should I replace them as well? Any
> tips or tricks for this next step? Thanks!
04-11-2005, 12:09 AM
#5
Guest
Posts: n/a
Re: Timing Chain Questions
Even though the chain and sprockets are sold separately, we replace
them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
griffin wrote:
>
> Well I went and took the timing chain cover off and noticed that the
> tensioner was unlocked and the chain, altho it sure looks new, has quite a
> bit of slack (.5-1" when there is no built up pressure) even when it is
> locked. I'm guessing it's a good idea to replace the chain as it might have
> been the source of my problems? Also, the sprockets are razor sharp ...I've
> heard that they should be somewhat dull. Should I replace them as well? Any
> tips or tricks for this next step? Thanks!
them all.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
griffin wrote:
>
> Well I went and took the timing chain cover off and noticed that the
> tensioner was unlocked and the chain, altho it sure looks new, has quite a
> bit of slack (.5-1" when there is no built up pressure) even when it is
> locked. I'm guessing it's a good idea to replace the chain as it might have
> been the source of my problems? Also, the sprockets are razor sharp ...I've
> heard that they should be somewhat dull. Should I replace them as well? Any
> tips or tricks for this next step? Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
googleid2003@yahoo.com
Jeep Mailing List
6
01-16-2005 05:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
