TIG Welding on a TJ
01-29-2007, 04:29 AM
#71
Guest
Posts: n/a
Re: TIG Welding on a TJ
Of course a fire extinguisher: http://www.----------.com/extingui.jpg
as per previous post. I'm never more than fifty feet from one. Commercial
trucks must tell you where theirs is by law via signage:
http://aitech.ac.jp/~itesls/signs/im...her_inside.jpg
God Bless America, Bill 0|||||||0
mailto:-------------------- >
> SOP these days is fire extinguisher FIRST -- and a good dose, better to
> freeze than fry -- plus some cooling agents or topical painkillers, THEN
> the blanket.
>
> And then quickly to the nearest hospital or better, a Burn Unit.
>
>
>
> --
as per previous post. I'm never more than fifty feet from one. Commercial
trucks must tell you where theirs is by law via signage:
http://aitech.ac.jp/~itesls/signs/im...her_inside.jpg
God Bless America, Bill 0|||||||0
mailto:-------------------- >
> SOP these days is fire extinguisher FIRST -- and a good dose, better to
> freeze than fry -- plus some cooling agents or topical painkillers, THEN
> the blanket.
>
> And then quickly to the nearest hospital or better, a Burn Unit.
>
>
>
> --
01-29-2007, 04:29 AM
#72
Guest
Posts: n/a
Re: TIG Welding on a TJ
Of course a fire extinguisher: http://www.----------.com/extingui.jpg
as per previous post. I'm never more than fifty feet from one. Commercial
trucks must tell you where theirs is by law via signage:
http://aitech.ac.jp/~itesls/signs/im...her_inside.jpg
God Bless America, Bill 0|||||||0
mailto:-------------------- >
> SOP these days is fire extinguisher FIRST -- and a good dose, better to
> freeze than fry -- plus some cooling agents or topical painkillers, THEN
> the blanket.
>
> And then quickly to the nearest hospital or better, a Burn Unit.
>
>
>
> --
as per previous post. I'm never more than fifty feet from one. Commercial
trucks must tell you where theirs is by law via signage:
http://aitech.ac.jp/~itesls/signs/im...her_inside.jpg
God Bless America, Bill 0|||||||0
mailto:-------------------- >
> SOP these days is fire extinguisher FIRST -- and a good dose, better to
> freeze than fry -- plus some cooling agents or topical painkillers, THEN
> the blanket.
>
> And then quickly to the nearest hospital or better, a Burn Unit.
>
>
>
> --
01-29-2007, 04:29 AM
#73
Guest
Posts: n/a
Re: TIG Welding on a TJ
Of course a fire extinguisher: http://www.----------.com/extingui.jpg
as per previous post. I'm never more than fifty feet from one. Commercial
trucks must tell you where theirs is by law via signage:
http://aitech.ac.jp/~itesls/signs/im...her_inside.jpg
God Bless America, Bill 0|||||||0
mailto:-------------------- >
> SOP these days is fire extinguisher FIRST -- and a good dose, better to
> freeze than fry -- plus some cooling agents or topical painkillers, THEN
> the blanket.
>
> And then quickly to the nearest hospital or better, a Burn Unit.
>
>
>
> --
as per previous post. I'm never more than fifty feet from one. Commercial
trucks must tell you where theirs is by law via signage:
http://aitech.ac.jp/~itesls/signs/im...her_inside.jpg
God Bless America, Bill 0|||||||0
mailto:-------------------- >
> SOP these days is fire extinguisher FIRST -- and a good dose, better to
> freeze than fry -- plus some cooling agents or topical painkillers, THEN
> the blanket.
>
> And then quickly to the nearest hospital or better, a Burn Unit.
>
>
>
> --
01-29-2007, 04:34 AM
#74
Guest
Posts: n/a
Re: TIG Welding on a TJ
http://www.crystalinks.com/shc.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl
01-29-2007, 04:34 AM
#75
Guest
Posts: n/a
Re: TIG Welding on a TJ
http://www.crystalinks.com/shc.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl
01-29-2007, 04:34 AM
#76
Guest
Posts: n/a
Re: TIG Welding on a TJ
http://www.crystalinks.com/shc.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl
01-29-2007, 04:34 AM
#77
Guest
Posts: n/a
Re: TIG Welding on a TJ
http://www.crystalinks.com/shc.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl
01-29-2007, 04:42 AM
#78
Guest
Posts: n/a
Re: TIG Welding on a TJ
Thanks for replies, I will bear them all in mind before I start.
It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle
Cheers
Nick
On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>
It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle
Cheers
Nick
On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>
01-29-2007, 04:42 AM
#79
Guest
Posts: n/a
Re: TIG Welding on a TJ
Thanks for replies, I will bear them all in mind before I start.
It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle
Cheers
Nick
On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>
It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle
Cheers
Nick
On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>
01-29-2007, 04:42 AM
#80
Guest
Posts: n/a
Re: TIG Welding on a TJ
Thanks for replies, I will bear them all in mind before I start.
It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle
Cheers
Nick
On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>
It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle
Cheers
Nick
On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>