Re: TIG Welding on a TJ
 

Of course a fire extinguisher: http://www.----------.com/extingui.jpg
as per previous post. I'm never more than fifty feet from one. Commercial
trucks must tell you where theirs is by law via signage:
http://aitech.ac.jp/~itesls/signs/im...her_inside.jpg
God Bless America, Bill 0|||||||0
mailto:-------------------- >

> SOP these days is fire extinguisher FIRST -- and a good dose, better to
> freeze than fry -- plus some cooling agents or topical painkillers, THEN
> the blanket.
>
> And then quickly to the nearest hospital or better, a Burn Unit.
>
>
>
> --

Re: TIG Welding on a TJ
 

Of course a fire extinguisher: http://www.----------.com/extingui.jpg
as per previous post. I'm never more than fifty feet from one. Commercial
trucks must tell you where theirs is by law via signage:
http://aitech.ac.jp/~itesls/signs/im...her_inside.jpg
God Bless America, Bill 0|||||||0
mailto:-------------------- >

> SOP these days is fire extinguisher FIRST -- and a good dose, better to
> freeze than fry -- plus some cooling agents or topical painkillers, THEN
> the blanket.
>
> And then quickly to the nearest hospital or better, a Burn Unit.
>
>
>
> --

Re: TIG Welding on a TJ
 

Of course a fire extinguisher: http://www.----------.com/extingui.jpg
as per previous post. I'm never more than fifty feet from one. Commercial
trucks must tell you where theirs is by law via signage:
http://aitech.ac.jp/~itesls/signs/im...her_inside.jpg
God Bless America, Bill 0|||||||0
mailto:-------------------- >

> SOP these days is fire extinguisher FIRST -- and a good dose, better to
> freeze than fry -- plus some cooling agents or topical painkillers, THEN
> the blanket.
>
> And then quickly to the nearest hospital or better, a Burn Unit.
>
>
>
> --

Re: TIG Welding on a TJ
 

http://www.crystalinks.com/shc.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl

Re: TIG Welding on a TJ
 

http://www.crystalinks.com/shc.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl

Re: TIG Welding on a TJ
 

http://www.crystalinks.com/shc.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl

Re: TIG Welding on a TJ
 

http://www.crystalinks.com/shc.html
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zuSdnZjnXeyPJyDYnZ2dnUVZ_v-tnZ2d@comcast.com...
> I have a great idea. If I weld in the nude, I'll be less likely to catch
on
> fire. I'm a genius! Who needs some welding done?! >BFG<
>
> Carl

Re: TIG Welding on a TJ
 

Thanks for replies, I will bear them all in mind before I start.

It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle

Cheers
Nick

On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:

>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>

Re: TIG Welding on a TJ
 

Thanks for replies, I will bear them all in mind before I start.

It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle

Cheers
Nick

On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:

>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>

Re: TIG Welding on a TJ
 

Thanks for replies, I will bear them all in mind before I start.

It's a 2002 TJ as I think someone asked what year and I am assuming
that was referring to the vehicle

Cheers
Nick

On Sun, 28 Jan 2007 19:46:09 -0800, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:

>97-05 >BFG<
>
>Carl
>
>"djdave" <djdave@fake.com> wrote in message
>news:nrpqr2ts3fflg2branich4gii42aqte626@4ax.com.. .
>> What Year?
>>
>> On Sun, 28 Jan 2007 22:15:59 +0000, Nick
>> <nick@nospam_nrdavis.demon.co.uk> wrote:
>>
>>>Hi,
>>> I was planning on moving the coil spring perch's on the Dana44
>>>on the back of my TJ to bring them back level under normal
>>>circumstances, due to a suspension lift then arm adjustments to
>>>realign the pinion angle. I am planning on using my TIG it has HF or
>>>Lift start as an initiation sequence. What safety precautions would
>>>be recommended in relation to the electrics on the vehicle before
>>>beginning to weld.
>>>
>>>Any information would be greatly appreciated.
>>>
>>>Cheers
>>>Nick
>>
>