Re: TIG Welding on a TJ
 

I have done plenty of MIG and SMAW welding on vehicles with no problems, but
considering the effects of HF with TIG, I would disconnect the battery
ground to protect components. Perhaps not necessary, but it couldn't hurt.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

Re: TIG Welding on a TJ
 

I have done plenty of MIG and SMAW welding on vehicles with no problems, but
considering the effects of HF with TIG, I would disconnect the battery
ground to protect components. Perhaps not necessary, but it couldn't hurt.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

Re: TIG Welding on a TJ
 

I have done plenty of MIG and SMAW welding on vehicles with no problems, but
considering the effects of HF with TIG, I would disconnect the battery
ground to protect components. Perhaps not necessary, but it couldn't hurt.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

Re: TIG Welding on a TJ
 

I like to have someone watching me with a fire extinguisher, water hose
and tarps.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
> Hi,
> I was planning on moving the coil spring perch's on the Dana44
> on the back of my TJ to bring them back level under normal
> circumstances, due to a suspension lift then arm adjustments to
> realign the pinion angle. I am planning on using my TIG it has HF or
> Lift start as an initiation sequence. What safety precautions would
> be recommended in relation to the electrics on the vehicle before
> beginning to weld.
>
> Any information would be greatly appreciated.
>
> Cheers
> Nick

Re: TIG Welding on a TJ
 

I like to have someone watching me with a fire extinguisher, water hose
and tarps.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
> Hi,
> I was planning on moving the coil spring perch's on the Dana44
> on the back of my TJ to bring them back level under normal
> circumstances, due to a suspension lift then arm adjustments to
> realign the pinion angle. I am planning on using my TIG it has HF or
> Lift start as an initiation sequence. What safety precautions would
> be recommended in relation to the electrics on the vehicle before
> beginning to weld.
>
> Any information would be greatly appreciated.
>
> Cheers
> Nick

Re: TIG Welding on a TJ
 

I like to have someone watching me with a fire extinguisher, water hose
and tarps.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
> Hi,
> I was planning on moving the coil spring perch's on the Dana44
> on the back of my TJ to bring them back level under normal
> circumstances, due to a suspension lift then arm adjustments to
> realign the pinion angle. I am planning on using my TIG it has HF or
> Lift start as an initiation sequence. What safety precautions would
> be recommended in relation to the electrics on the vehicle before
> beginning to weld.
>
> Any information would be greatly appreciated.
>
> Cheers
> Nick

Re: TIG Welding on a TJ
 

I like to have someone watching me with a fire extinguisher, water hose
and tarps.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
> Hi,
> I was planning on moving the coil spring perch's on the Dana44
> on the back of my TJ to bring them back level under normal
> circumstances, due to a suspension lift then arm adjustments to
> realign the pinion angle. I am planning on using my TIG it has HF or
> Lift start as an initiation sequence. What safety precautions would
> be recommended in relation to the electrics on the vehicle before
> beginning to weld.
>
> Any information would be greatly appreciated.
>
> Cheers
> Nick

Re: TIG Welding on a TJ
 

Bill,

Tarps?

Carl

"L.W. (Bill) ------ III" <----------@cox.net> wrote in message
news:5250g3F1n6emcU1@mid.individual.net...
> I like to have someone watching me with a fire extinguisher, water hose
> and tarps.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
> news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
>> Hi,
>> I was planning on moving the coil spring perch's on the Dana44
>> on the back of my TJ to bring them back level under normal
>> circumstances, due to a suspension lift then arm adjustments to
>> realign the pinion angle. I am planning on using my TIG it has HF or
>> Lift start as an initiation sequence. What safety precautions would
>> be recommended in relation to the electrics on the vehicle before
>> beginning to weld.
>>
>> Any information would be greatly appreciated.
>>
>> Cheers
>> Nick
>
>

Re: TIG Welding on a TJ
 

Bill,

Tarps?

Carl

"L.W. (Bill) ------ III" <----------@cox.net> wrote in message
news:5250g3F1n6emcU1@mid.individual.net...
> I like to have someone watching me with a fire extinguisher, water hose
> and tarps.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
> news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
>> Hi,
>> I was planning on moving the coil spring perch's on the Dana44
>> on the back of my TJ to bring them back level under normal
>> circumstances, due to a suspension lift then arm adjustments to
>> realign the pinion angle. I am planning on using my TIG it has HF or
>> Lift start as an initiation sequence. What safety precautions would
>> be recommended in relation to the electrics on the vehicle before
>> beginning to weld.
>>
>> Any information would be greatly appreciated.
>>
>> Cheers
>> Nick
>
>

Re: TIG Welding on a TJ
 

Bill,

Tarps?

Carl

"L.W. (Bill) ------ III" <----------@cox.net> wrote in message
news:5250g3F1n6emcU1@mid.individual.net...
> I like to have someone watching me with a fire extinguisher, water hose
> and tarps.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Nick" <nick@nospam_nrdavis.demon.co.uk> wrote in message
> news:et7qr2ptbbcmukh19d1shbag1ej22qjoc7@4ax.com...
>> Hi,
>> I was planning on moving the coil spring perch's on the Dana44
>> on the back of my TJ to bring them back level under normal
>> circumstances, due to a suspension lift then arm adjustments to
>> realign the pinion angle. I am planning on using my TIG it has HF or
>> Lift start as an initiation sequence. What safety precautions would
>> be recommended in relation to the electrics on the vehicle before
>> beginning to weld.
>>
>> Any information would be greatly appreciated.
>>
>> Cheers
>> Nick
>
>