Throttle linkage disconnected on '89 YJ
09-29-2006, 10:14 AM
#11
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
Right on the money Mike!!
I had to buy the rod that connect the carb to pedal
linkage. There was a spring clip on both ends. The
one on the lower end was rusted and worn. I guess
after 18 years and 152000 miles......... At $37.00, I
thought it was a little overpriced, but I was glad it was
still available. Right now I'm tooling around with Bill's fix.
Thanks,
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451C6E47.C3A91F9C@sympatico.ca...
> Mine also does that now and then. It is a pain. There is a spring clip
> that was spot welded to the socket. They break at the spot weld.
> Besides Bill's fix, you need a new cable as far as I know.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Joe C wrote:
> >
> > On my way home from work today my gas peddle went
> > flat to the floor. I looked under the hood, used some
> > string to keep the ball and socket linkage together and
> > babied it home. What came off, anyone know? Is there also a spring
involved
> > here? Thanks!
> > Joe
> > '89 YJ 4.2 5spd
I had to buy the rod that connect the carb to pedal
linkage. There was a spring clip on both ends. The
one on the lower end was rusted and worn. I guess
after 18 years and 152000 miles......... At $37.00, I
thought it was a little overpriced, but I was glad it was
still available. Right now I'm tooling around with Bill's fix.
Thanks,
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451C6E47.C3A91F9C@sympatico.ca...
> Mine also does that now and then. It is a pain. There is a spring clip
> that was spot welded to the socket. They break at the spot weld.
> Besides Bill's fix, you need a new cable as far as I know.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Joe C wrote:
> >
> > On my way home from work today my gas peddle went
> > flat to the floor. I looked under the hood, used some
> > string to keep the ball and socket linkage together and
> > babied it home. What came off, anyone know? Is there also a spring
involved
> > here? Thanks!
> > Joe
> > '89 YJ 4.2 5spd
09-29-2006, 10:14 AM
#12
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
Right on the money Mike!!
I had to buy the rod that connect the carb to pedal
linkage. There was a spring clip on both ends. The
one on the lower end was rusted and worn. I guess
after 18 years and 152000 miles......... At $37.00, I
thought it was a little overpriced, but I was glad it was
still available. Right now I'm tooling around with Bill's fix.
Thanks,
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451C6E47.C3A91F9C@sympatico.ca...
> Mine also does that now and then. It is a pain. There is a spring clip
> that was spot welded to the socket. They break at the spot weld.
> Besides Bill's fix, you need a new cable as far as I know.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Joe C wrote:
> >
> > On my way home from work today my gas peddle went
> > flat to the floor. I looked under the hood, used some
> > string to keep the ball and socket linkage together and
> > babied it home. What came off, anyone know? Is there also a spring
involved
> > here? Thanks!
> > Joe
> > '89 YJ 4.2 5spd
I had to buy the rod that connect the carb to pedal
linkage. There was a spring clip on both ends. The
one on the lower end was rusted and worn. I guess
after 18 years and 152000 miles......... At $37.00, I
thought it was a little overpriced, but I was glad it was
still available. Right now I'm tooling around with Bill's fix.
Thanks,
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451C6E47.C3A91F9C@sympatico.ca...
> Mine also does that now and then. It is a pain. There is a spring clip
> that was spot welded to the socket. They break at the spot weld.
> Besides Bill's fix, you need a new cable as far as I know.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Joe C wrote:
> >
> > On my way home from work today my gas peddle went
> > flat to the floor. I looked under the hood, used some
> > string to keep the ball and socket linkage together and
> > babied it home. What came off, anyone know? Is there also a spring
involved
> > here? Thanks!
> > Joe
> > '89 YJ 4.2 5spd
09-29-2006, 10:14 AM
#13
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
Right on the money Mike!!
I had to buy the rod that connect the carb to pedal
linkage. There was a spring clip on both ends. The
one on the lower end was rusted and worn. I guess
after 18 years and 152000 miles......... At $37.00, I
thought it was a little overpriced, but I was glad it was
still available. Right now I'm tooling around with Bill's fix.
Thanks,
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451C6E47.C3A91F9C@sympatico.ca...
> Mine also does that now and then. It is a pain. There is a spring clip
> that was spot welded to the socket. They break at the spot weld.
> Besides Bill's fix, you need a new cable as far as I know.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Joe C wrote:
> >
> > On my way home from work today my gas peddle went
> > flat to the floor. I looked under the hood, used some
> > string to keep the ball and socket linkage together and
> > babied it home. What came off, anyone know? Is there also a spring
involved
> > here? Thanks!
> > Joe
> > '89 YJ 4.2 5spd
I had to buy the rod that connect the carb to pedal
linkage. There was a spring clip on both ends. The
one on the lower end was rusted and worn. I guess
after 18 years and 152000 miles......... At $37.00, I
thought it was a little overpriced, but I was glad it was
still available. Right now I'm tooling around with Bill's fix.
Thanks,
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451C6E47.C3A91F9C@sympatico.ca...
> Mine also does that now and then. It is a pain. There is a spring clip
> that was spot welded to the socket. They break at the spot weld.
> Besides Bill's fix, you need a new cable as far as I know.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Joe C wrote:
> >
> > On my way home from work today my gas peddle went
> > flat to the floor. I looked under the hood, used some
> > string to keep the ball and socket linkage together and
> > babied it home. What came off, anyone know? Is there also a spring
involved
> > here? Thanks!
> > Joe
> > '89 YJ 4.2 5spd
09-29-2006, 10:57 AM
#14
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
I like Bill's fix. Loop the paperclip around the ball's base, make a 90
with it and loop it around the socket's base. I have some stainless
wire around from old ground clips on cigarette lighter adapters I might
use instead of the paper clip.
Mike
Joe C wrote:
>
> Right on the money Mike!!
> I had to buy the rod that connect the carb to pedal
> linkage. There was a spring clip on both ends. The
> one on the lower end was rusted and worn. I guess
> after 18 years and 152000 miles......... At $37.00, I
> thought it was a little overpriced, but I was glad it was
> still available. Right now I'm tooling around with Bill's fix.
> Thanks,
> Joe
> '89 YJ 4.2 5spd
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:451C6E47.C3A91F9C@sympatico.ca...
> > Mine also does that now and then. It is a pain. There is a spring clip
> > that was spot welded to the socket. They break at the spot weld.
> > Besides Bill's fix, you need a new cable as far as I know.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Joe C wrote:
> > >
> > > On my way home from work today my gas peddle went
> > > flat to the floor. I looked under the hood, used some
> > > string to keep the ball and socket linkage together and
> > > babied it home. What came off, anyone know? Is there also a spring
> involved
> > > here? Thanks!
> > > Joe
> > > '89 YJ 4.2 5spd
with it and loop it around the socket's base. I have some stainless
wire around from old ground clips on cigarette lighter adapters I might
use instead of the paper clip.
Mike
Joe C wrote:
>
> Right on the money Mike!!
> I had to buy the rod that connect the carb to pedal
> linkage. There was a spring clip on both ends. The
> one on the lower end was rusted and worn. I guess
> after 18 years and 152000 miles......... At $37.00, I
> thought it was a little overpriced, but I was glad it was
> still available. Right now I'm tooling around with Bill's fix.
> Thanks,
> Joe
> '89 YJ 4.2 5spd
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:451C6E47.C3A91F9C@sympatico.ca...
> > Mine also does that now and then. It is a pain. There is a spring clip
> > that was spot welded to the socket. They break at the spot weld.
> > Besides Bill's fix, you need a new cable as far as I know.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Joe C wrote:
> > >
> > > On my way home from work today my gas peddle went
> > > flat to the floor. I looked under the hood, used some
> > > string to keep the ball and socket linkage together and
> > > babied it home. What came off, anyone know? Is there also a spring
> involved
> > > here? Thanks!
> > > Joe
> > > '89 YJ 4.2 5spd
09-29-2006, 10:57 AM
#15
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
I like Bill's fix. Loop the paperclip around the ball's base, make a 90
with it and loop it around the socket's base. I have some stainless
wire around from old ground clips on cigarette lighter adapters I might
use instead of the paper clip.
Mike
Joe C wrote:
>
> Right on the money Mike!!
> I had to buy the rod that connect the carb to pedal
> linkage. There was a spring clip on both ends. The
> one on the lower end was rusted and worn. I guess
> after 18 years and 152000 miles......... At $37.00, I
> thought it was a little overpriced, but I was glad it was
> still available. Right now I'm tooling around with Bill's fix.
> Thanks,
> Joe
> '89 YJ 4.2 5spd
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:451C6E47.C3A91F9C@sympatico.ca...
> > Mine also does that now and then. It is a pain. There is a spring clip
> > that was spot welded to the socket. They break at the spot weld.
> > Besides Bill's fix, you need a new cable as far as I know.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Joe C wrote:
> > >
> > > On my way home from work today my gas peddle went
> > > flat to the floor. I looked under the hood, used some
> > > string to keep the ball and socket linkage together and
> > > babied it home. What came off, anyone know? Is there also a spring
> involved
> > > here? Thanks!
> > > Joe
> > > '89 YJ 4.2 5spd
with it and loop it around the socket's base. I have some stainless
wire around from old ground clips on cigarette lighter adapters I might
use instead of the paper clip.
Mike
Joe C wrote:
>
> Right on the money Mike!!
> I had to buy the rod that connect the carb to pedal
> linkage. There was a spring clip on both ends. The
> one on the lower end was rusted and worn. I guess
> after 18 years and 152000 miles......... At $37.00, I
> thought it was a little overpriced, but I was glad it was
> still available. Right now I'm tooling around with Bill's fix.
> Thanks,
> Joe
> '89 YJ 4.2 5spd
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:451C6E47.C3A91F9C@sympatico.ca...
> > Mine also does that now and then. It is a pain. There is a spring clip
> > that was spot welded to the socket. They break at the spot weld.
> > Besides Bill's fix, you need a new cable as far as I know.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Joe C wrote:
> > >
> > > On my way home from work today my gas peddle went
> > > flat to the floor. I looked under the hood, used some
> > > string to keep the ball and socket linkage together and
> > > babied it home. What came off, anyone know? Is there also a spring
> involved
> > > here? Thanks!
> > > Joe
> > > '89 YJ 4.2 5spd
09-29-2006, 10:57 AM
#16
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
I like Bill's fix. Loop the paperclip around the ball's base, make a 90
with it and loop it around the socket's base. I have some stainless
wire around from old ground clips on cigarette lighter adapters I might
use instead of the paper clip.
Mike
Joe C wrote:
>
> Right on the money Mike!!
> I had to buy the rod that connect the carb to pedal
> linkage. There was a spring clip on both ends. The
> one on the lower end was rusted and worn. I guess
> after 18 years and 152000 miles......... At $37.00, I
> thought it was a little overpriced, but I was glad it was
> still available. Right now I'm tooling around with Bill's fix.
> Thanks,
> Joe
> '89 YJ 4.2 5spd
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:451C6E47.C3A91F9C@sympatico.ca...
> > Mine also does that now and then. It is a pain. There is a spring clip
> > that was spot welded to the socket. They break at the spot weld.
> > Besides Bill's fix, you need a new cable as far as I know.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Joe C wrote:
> > >
> > > On my way home from work today my gas peddle went
> > > flat to the floor. I looked under the hood, used some
> > > string to keep the ball and socket linkage together and
> > > babied it home. What came off, anyone know? Is there also a spring
> involved
> > > here? Thanks!
> > > Joe
> > > '89 YJ 4.2 5spd
with it and loop it around the socket's base. I have some stainless
wire around from old ground clips on cigarette lighter adapters I might
use instead of the paper clip.
Mike
Joe C wrote:
>
> Right on the money Mike!!
> I had to buy the rod that connect the carb to pedal
> linkage. There was a spring clip on both ends. The
> one on the lower end was rusted and worn. I guess
> after 18 years and 152000 miles......... At $37.00, I
> thought it was a little overpriced, but I was glad it was
> still available. Right now I'm tooling around with Bill's fix.
> Thanks,
> Joe
> '89 YJ 4.2 5spd
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:451C6E47.C3A91F9C@sympatico.ca...
> > Mine also does that now and then. It is a pain. There is a spring clip
> > that was spot welded to the socket. They break at the spot weld.
> > Besides Bill's fix, you need a new cable as far as I know.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > (More Off Road album links at bottom of the view page)
> >
> > Joe C wrote:
> > >
> > > On my way home from work today my gas peddle went
> > > flat to the floor. I looked under the hood, used some
> > > string to keep the ball and socket linkage together and
> > > babied it home. What came off, anyone know? Is there also a spring
> involved
> > > here? Thanks!
> > > Joe
> > > '89 YJ 4.2 5spd
10-03-2006, 07:44 PM
#17
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
I just picked up the new link. It looks as though
you have to actually crimp the little clips yourself
after you slip it over the ball. Does that seem correct?
I was under the impression that they were preformed
spring steel that would slip, under pressure, over the
ball! Ugggh!! Also, any reason I wouldn't apply a
little grease to these two points? Thanks.
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451D3463.A365000B@sympatico.ca...
> I like Bill's fix. Loop the paperclip around the ball's base, make a 90
> with it and loop it around the socket's base. I have some stainless
> wire around from old ground clips on cigarette lighter adapters I might
> use instead of the paper clip.
>
> Mike
>
> Joe C wrote:
> >
> > Right on the money Mike!!
> > I had to buy the rod that connect the carb to pedal
> > linkage. There was a spring clip on both ends. The
> > one on the lower end was rusted and worn. I guess
> > after 18 years and 152000 miles......... At $37.00, I
> > thought it was a little overpriced, but I was glad it was
> > still available. Right now I'm tooling around with Bill's fix.
> > Thanks,
> > Joe
> > '89 YJ 4.2 5spd
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:451C6E47.C3A91F9C@sympatico.ca...
> > > Mine also does that now and then. It is a pain. There is a spring
clip
> > > that was spot welded to the socket. They break at the spot weld.
> > > Besides Bill's fix, you need a new cable as far as I know.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Joe C wrote:
> > > >
> > > > On my way home from work today my gas peddle went
> > > > flat to the floor. I looked under the hood, used some
> > > > string to keep the ball and socket linkage together and
> > > > babied it home. What came off, anyone know? Is there also a spring
> > involved
> > > > here? Thanks!
> > > > Joe
> > > > '89 YJ 4.2 5spd
you have to actually crimp the little clips yourself
after you slip it over the ball. Does that seem correct?
I was under the impression that they were preformed
spring steel that would slip, under pressure, over the
ball! Ugggh!! Also, any reason I wouldn't apply a
little grease to these two points? Thanks.
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451D3463.A365000B@sympatico.ca...
> I like Bill's fix. Loop the paperclip around the ball's base, make a 90
> with it and loop it around the socket's base. I have some stainless
> wire around from old ground clips on cigarette lighter adapters I might
> use instead of the paper clip.
>
> Mike
>
> Joe C wrote:
> >
> > Right on the money Mike!!
> > I had to buy the rod that connect the carb to pedal
> > linkage. There was a spring clip on both ends. The
> > one on the lower end was rusted and worn. I guess
> > after 18 years and 152000 miles......... At $37.00, I
> > thought it was a little overpriced, but I was glad it was
> > still available. Right now I'm tooling around with Bill's fix.
> > Thanks,
> > Joe
> > '89 YJ 4.2 5spd
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:451C6E47.C3A91F9C@sympatico.ca...
> > > Mine also does that now and then. It is a pain. There is a spring
clip
> > > that was spot welded to the socket. They break at the spot weld.
> > > Besides Bill's fix, you need a new cable as far as I know.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Joe C wrote:
> > > >
> > > > On my way home from work today my gas peddle went
> > > > flat to the floor. I looked under the hood, used some
> > > > string to keep the ball and socket linkage together and
> > > > babied it home. What came off, anyone know? Is there also a spring
> > involved
> > > > here? Thanks!
> > > > Joe
> > > > '89 YJ 4.2 5spd
10-03-2006, 07:44 PM
#18
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
I just picked up the new link. It looks as though
you have to actually crimp the little clips yourself
after you slip it over the ball. Does that seem correct?
I was under the impression that they were preformed
spring steel that would slip, under pressure, over the
ball! Ugggh!! Also, any reason I wouldn't apply a
little grease to these two points? Thanks.
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451D3463.A365000B@sympatico.ca...
> I like Bill's fix. Loop the paperclip around the ball's base, make a 90
> with it and loop it around the socket's base. I have some stainless
> wire around from old ground clips on cigarette lighter adapters I might
> use instead of the paper clip.
>
> Mike
>
> Joe C wrote:
> >
> > Right on the money Mike!!
> > I had to buy the rod that connect the carb to pedal
> > linkage. There was a spring clip on both ends. The
> > one on the lower end was rusted and worn. I guess
> > after 18 years and 152000 miles......... At $37.00, I
> > thought it was a little overpriced, but I was glad it was
> > still available. Right now I'm tooling around with Bill's fix.
> > Thanks,
> > Joe
> > '89 YJ 4.2 5spd
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:451C6E47.C3A91F9C@sympatico.ca...
> > > Mine also does that now and then. It is a pain. There is a spring
clip
> > > that was spot welded to the socket. They break at the spot weld.
> > > Besides Bill's fix, you need a new cable as far as I know.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Joe C wrote:
> > > >
> > > > On my way home from work today my gas peddle went
> > > > flat to the floor. I looked under the hood, used some
> > > > string to keep the ball and socket linkage together and
> > > > babied it home. What came off, anyone know? Is there also a spring
> > involved
> > > > here? Thanks!
> > > > Joe
> > > > '89 YJ 4.2 5spd
you have to actually crimp the little clips yourself
after you slip it over the ball. Does that seem correct?
I was under the impression that they were preformed
spring steel that would slip, under pressure, over the
ball! Ugggh!! Also, any reason I wouldn't apply a
little grease to these two points? Thanks.
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451D3463.A365000B@sympatico.ca...
> I like Bill's fix. Loop the paperclip around the ball's base, make a 90
> with it and loop it around the socket's base. I have some stainless
> wire around from old ground clips on cigarette lighter adapters I might
> use instead of the paper clip.
>
> Mike
>
> Joe C wrote:
> >
> > Right on the money Mike!!
> > I had to buy the rod that connect the carb to pedal
> > linkage. There was a spring clip on both ends. The
> > one on the lower end was rusted and worn. I guess
> > after 18 years and 152000 miles......... At $37.00, I
> > thought it was a little overpriced, but I was glad it was
> > still available. Right now I'm tooling around with Bill's fix.
> > Thanks,
> > Joe
> > '89 YJ 4.2 5spd
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:451C6E47.C3A91F9C@sympatico.ca...
> > > Mine also does that now and then. It is a pain. There is a spring
clip
> > > that was spot welded to the socket. They break at the spot weld.
> > > Besides Bill's fix, you need a new cable as far as I know.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Joe C wrote:
> > > >
> > > > On my way home from work today my gas peddle went
> > > > flat to the floor. I looked under the hood, used some
> > > > string to keep the ball and socket linkage together and
> > > > babied it home. What came off, anyone know? Is there also a spring
> > involved
> > > > here? Thanks!
> > > > Joe
> > > > '89 YJ 4.2 5spd
10-03-2006, 07:44 PM
#19
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
I just picked up the new link. It looks as though
you have to actually crimp the little clips yourself
after you slip it over the ball. Does that seem correct?
I was under the impression that they were preformed
spring steel that would slip, under pressure, over the
ball! Ugggh!! Also, any reason I wouldn't apply a
little grease to these two points? Thanks.
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451D3463.A365000B@sympatico.ca...
> I like Bill's fix. Loop the paperclip around the ball's base, make a 90
> with it and loop it around the socket's base. I have some stainless
> wire around from old ground clips on cigarette lighter adapters I might
> use instead of the paper clip.
>
> Mike
>
> Joe C wrote:
> >
> > Right on the money Mike!!
> > I had to buy the rod that connect the carb to pedal
> > linkage. There was a spring clip on both ends. The
> > one on the lower end was rusted and worn. I guess
> > after 18 years and 152000 miles......... At $37.00, I
> > thought it was a little overpriced, but I was glad it was
> > still available. Right now I'm tooling around with Bill's fix.
> > Thanks,
> > Joe
> > '89 YJ 4.2 5spd
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:451C6E47.C3A91F9C@sympatico.ca...
> > > Mine also does that now and then. It is a pain. There is a spring
clip
> > > that was spot welded to the socket. They break at the spot weld.
> > > Besides Bill's fix, you need a new cable as far as I know.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Joe C wrote:
> > > >
> > > > On my way home from work today my gas peddle went
> > > > flat to the floor. I looked under the hood, used some
> > > > string to keep the ball and socket linkage together and
> > > > babied it home. What came off, anyone know? Is there also a spring
> > involved
> > > > here? Thanks!
> > > > Joe
> > > > '89 YJ 4.2 5spd
you have to actually crimp the little clips yourself
after you slip it over the ball. Does that seem correct?
I was under the impression that they were preformed
spring steel that would slip, under pressure, over the
ball! Ugggh!! Also, any reason I wouldn't apply a
little grease to these two points? Thanks.
Joe
'89 YJ 4.2 5spd
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:451D3463.A365000B@sympatico.ca...
> I like Bill's fix. Loop the paperclip around the ball's base, make a 90
> with it and loop it around the socket's base. I have some stainless
> wire around from old ground clips on cigarette lighter adapters I might
> use instead of the paper clip.
>
> Mike
>
> Joe C wrote:
> >
> > Right on the money Mike!!
> > I had to buy the rod that connect the carb to pedal
> > linkage. There was a spring clip on both ends. The
> > one on the lower end was rusted and worn. I guess
> > after 18 years and 152000 miles......... At $37.00, I
> > thought it was a little overpriced, but I was glad it was
> > still available. Right now I'm tooling around with Bill's fix.
> > Thanks,
> > Joe
> > '89 YJ 4.2 5spd
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:451C6E47.C3A91F9C@sympatico.ca...
> > > Mine also does that now and then. It is a pain. There is a spring
clip
> > > that was spot welded to the socket. They break at the spot weld.
> > > Besides Bill's fix, you need a new cable as far as I know.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > > Canadian Off Road Trips Photos: Non members can still view!
> > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > (More Off Road album links at bottom of the view page)
> > >
> > > Joe C wrote:
> > > >
> > > > On my way home from work today my gas peddle went
> > > > flat to the floor. I looked under the hood, used some
> > > > string to keep the ball and socket linkage together and
> > > > babied it home. What came off, anyone know? Is there also a spring
> > involved
> > > > here? Thanks!
> > > > Joe
> > > > '89 YJ 4.2 5spd
10-03-2006, 08:00 PM
#20
Guest
Posts: n/a
Re: Throttle linkage disconnected on '89 YJ
You're kidding....
No wonder they break, planned obsolescence at it worst. If you have to
bend them, that takes the temper out of the bend and they 'will' fail
eventually. Especially if you remove them once or twice because they do
snap on and off once bent. Planned it would seem.
I would try it first without bending to see....
My failure is on the cable end, but the same part.
Mike
Joe C wrote:
>
> I just picked up the new link. It looks as though
> you have to actually crimp the little clips yourself
> after you slip it over the ball. Does that seem correct?
> I was under the impression that they were preformed
> spring steel that would slip, under pressure, over the
> ball! Ugggh!! Also, any reason I wouldn't apply a
> little grease to these two points? Thanks.
> Joe
> '89 YJ 4.2 5spd
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:451D3463.A365000B@sympatico.ca...
> > I like Bill's fix. Loop the paperclip around the ball's base, make a 90
> > with it and loop it around the socket's base. I have some stainless
> > wire around from old ground clips on cigarette lighter adapters I might
> > use instead of the paper clip.
> >
> > Mike
> >
> > Joe C wrote:
> > >
> > > Right on the money Mike!!
> > > I had to buy the rod that connect the carb to pedal
> > > linkage. There was a spring clip on both ends. The
> > > one on the lower end was rusted and worn. I guess
> > > after 18 years and 152000 miles......... At $37.00, I
> > > thought it was a little overpriced, but I was glad it was
> > > still available. Right now I'm tooling around with Bill's fix.
> > > Thanks,
> > > Joe
> > > '89 YJ 4.2 5spd
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:451C6E47.C3A91F9C@sympatico.ca...
> > > > Mine also does that now and then. It is a pain. There is a spring
> clip
> > > > that was spot welded to the socket. They break at the spot weld.
> > > > Besides Bill's fix, you need a new cable as far as I know.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > > Canadian Off Road Trips Photos: Non members can still view!
> > > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > > (More Off Road album links at bottom of the view page)
> > > >
> > > > Joe C wrote:
> > > > >
> > > > > On my way home from work today my gas peddle went
> > > > > flat to the floor. I looked under the hood, used some
> > > > > string to keep the ball and socket linkage together and
> > > > > babied it home. What came off, anyone know? Is there also a spring
> > > involved
> > > > > here? Thanks!
> > > > > Joe
> > > > > '89 YJ 4.2 5spd
No wonder they break, planned obsolescence at it worst. If you have to
bend them, that takes the temper out of the bend and they 'will' fail
eventually. Especially if you remove them once or twice because they do
snap on and off once bent. Planned it would seem.
I would try it first without bending to see....
My failure is on the cable end, but the same part.
Mike
Joe C wrote:
>
> I just picked up the new link. It looks as though
> you have to actually crimp the little clips yourself
> after you slip it over the ball. Does that seem correct?
> I was under the impression that they were preformed
> spring steel that would slip, under pressure, over the
> ball! Ugggh!! Also, any reason I wouldn't apply a
> little grease to these two points? Thanks.
> Joe
> '89 YJ 4.2 5spd
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:451D3463.A365000B@sympatico.ca...
> > I like Bill's fix. Loop the paperclip around the ball's base, make a 90
> > with it and loop it around the socket's base. I have some stainless
> > wire around from old ground clips on cigarette lighter adapters I might
> > use instead of the paper clip.
> >
> > Mike
> >
> > Joe C wrote:
> > >
> > > Right on the money Mike!!
> > > I had to buy the rod that connect the carb to pedal
> > > linkage. There was a spring clip on both ends. The
> > > one on the lower end was rusted and worn. I guess
> > > after 18 years and 152000 miles......... At $37.00, I
> > > thought it was a little overpriced, but I was glad it was
> > > still available. Right now I'm tooling around with Bill's fix.
> > > Thanks,
> > > Joe
> > > '89 YJ 4.2 5spd
> > >
> > > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > > news:451C6E47.C3A91F9C@sympatico.ca...
> > > > Mine also does that now and then. It is a pain. There is a spring
> clip
> > > > that was spot welded to the socket. They break at the spot weld.
> > > > Besides Bill's fix, you need a new cable as far as I know.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > > Canadian Off Road Trips Photos: Non members can still view!
> > > > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> > > > (More Off Road album links at bottom of the view page)
> > > >
> > > > Joe C wrote:
> > > > >
> > > > > On my way home from work today my gas peddle went
> > > > > flat to the floor. I looked under the hood, used some
> > > > > string to keep the ball and socket linkage together and
> > > > > babied it home. What came off, anyone know? Is there also a spring
> > > involved
> > > > > here? Thanks!
> > > > > Joe
> > > > > '89 YJ 4.2 5spd