Thread-loc on CB antenna?
06-19-2006, 08:54 AM
#1
Guest
Posts: n/a
Thread-loc on CB antenna?
For some reason my antenna mast keeps vibrating loose from the base..
many times I have checked it and it was only being held by a couple of
threads. If I put a but of loc-tite on it will it still work correctly?
--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
many times I have checked it and it was only being held by a couple of
threads. If I put a but of loc-tite on it will it still work correctly?
--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
06-19-2006, 05:55 PM
#2
Guest
Posts: n/a
Re: Thread-loc on CB antenna?
In article <aarongraham-F775A3.08543719062006@syrcnyrdrs-01-ge0.nyroc.rr.com>,
aGraham <aarongraham@mac.com.removeme> wrote:
#For some reason my antenna mast keeps vibrating loose from the base..
#many times I have checked it and it was only being held by a couple of
#threads. If I put a but of loc-tite on it will it still work correctly?
Probably. You could also use a lock washer as well.
/herb
aGraham <aarongraham@mac.com.removeme> wrote:
#For some reason my antenna mast keeps vibrating loose from the base..
#many times I have checked it and it was only being held by a couple of
#threads. If I put a but of loc-tite on it will it still work correctly?
Probably. You could also use a lock washer as well.
/herb
06-19-2006, 05:55 PM
#3
Guest
Posts: n/a
Re: Thread-loc on CB antenna?
In article <aarongraham-F775A3.08543719062006@syrcnyrdrs-01-ge0.nyroc.rr.com>,
aGraham <aarongraham@mac.com.removeme> wrote:
#For some reason my antenna mast keeps vibrating loose from the base..
#many times I have checked it and it was only being held by a couple of
#threads. If I put a but of loc-tite on it will it still work correctly?
Probably. You could also use a lock washer as well.
/herb
aGraham <aarongraham@mac.com.removeme> wrote:
#For some reason my antenna mast keeps vibrating loose from the base..
#many times I have checked it and it was only being held by a couple of
#threads. If I put a but of loc-tite on it will it still work correctly?
Probably. You could also use a lock washer as well.
/herb
06-19-2006, 05:55 PM
#4
Guest
Posts: n/a
Re: Thread-loc on CB antenna?
In article <aarongraham-F775A3.08543719062006@syrcnyrdrs-01-ge0.nyroc.rr.com>,
aGraham <aarongraham@mac.com.removeme> wrote:
#For some reason my antenna mast keeps vibrating loose from the base..
#many times I have checked it and it was only being held by a couple of
#threads. If I put a but of loc-tite on it will it still work correctly?
Probably. You could also use a lock washer as well.
/herb
aGraham <aarongraham@mac.com.removeme> wrote:
#For some reason my antenna mast keeps vibrating loose from the base..
#many times I have checked it and it was only being held by a couple of
#threads. If I put a but of loc-tite on it will it still work correctly?
Probably. You could also use a lock washer as well.
/herb
06-19-2006, 07:30 PM
#5
Guest
Posts: n/a
Re: Thread-loc on CB antenna?
aGraham did pass the time by typing:
> For some reason my antenna mast keeps vibrating loose from the base..
> many times I have checked it and it was only being held by a couple of
> threads. If I put a but of loc-tite on it will it still work correctly?
Yes. loc-tite only fills the cavities, just use a teeny drop.
Use the red (242) one so you can actually get it apart at a later date.
--
DougW
> For some reason my antenna mast keeps vibrating loose from the base..
> many times I have checked it and it was only being held by a couple of
> threads. If I put a but of loc-tite on it will it still work correctly?
Yes. loc-tite only fills the cavities, just use a teeny drop.
Use the red (242) one so you can actually get it apart at a later date.
--
DougW
06-19-2006, 07:30 PM
#6
Guest
Posts: n/a
Re: Thread-loc on CB antenna?
aGraham did pass the time by typing:
> For some reason my antenna mast keeps vibrating loose from the base..
> many times I have checked it and it was only being held by a couple of
> threads. If I put a but of loc-tite on it will it still work correctly?
Yes. loc-tite only fills the cavities, just use a teeny drop.
Use the red (242) one so you can actually get it apart at a later date.
--
DougW
> For some reason my antenna mast keeps vibrating loose from the base..
> many times I have checked it and it was only being held by a couple of
> threads. If I put a but of loc-tite on it will it still work correctly?
Yes. loc-tite only fills the cavities, just use a teeny drop.
Use the red (242) one so you can actually get it apart at a later date.
--
DougW
06-19-2006, 07:30 PM
#7
Guest
Posts: n/a
Re: Thread-loc on CB antenna?
aGraham did pass the time by typing:
> For some reason my antenna mast keeps vibrating loose from the base..
> many times I have checked it and it was only being held by a couple of
> threads. If I put a but of loc-tite on it will it still work correctly?
Yes. loc-tite only fills the cavities, just use a teeny drop.
Use the red (242) one so you can actually get it apart at a later date.
--
DougW
> For some reason my antenna mast keeps vibrating loose from the base..
> many times I have checked it and it was only being held by a couple of
> threads. If I put a but of loc-tite on it will it still work correctly?
Yes. loc-tite only fills the cavities, just use a teeny drop.
Use the red (242) one so you can actually get it apart at a later date.
--
DougW
06-20-2006, 01:35 PM
#8
Guest
Posts: n/a
Re: Thread-loc on CB antenna?
Correct me if I'm wrong Doug, but isn't the blue Loc-Tite the removable? I
am pretty sure 242 is blue. but I'm too lazy to go and look in the shop.
Chris
"DougW" <post.replies@invalid.address> wrote in message
news:3sGlg.57828$9c6.18046@dukeread11...
> aGraham did pass the time by typing:
>> For some reason my antenna mast keeps vibrating loose from the base..
>> many times I have checked it and it was only being held by a couple of
>> threads. If I put a but of loc-tite on it will it still work correctly?
>
> Yes. loc-tite only fills the cavities, just use a teeny drop.
>
> Use the red (242) one so you can actually get it apart at a later date.
>
> --
> DougW
>
am pretty sure 242 is blue. but I'm too lazy to go and look in the shop.
Chris
"DougW" <post.replies@invalid.address> wrote in message
news:3sGlg.57828$9c6.18046@dukeread11...
> aGraham did pass the time by typing:
>> For some reason my antenna mast keeps vibrating loose from the base..
>> many times I have checked it and it was only being held by a couple of
>> threads. If I put a but of loc-tite on it will it still work correctly?
>
> Yes. loc-tite only fills the cavities, just use a teeny drop.
>
> Use the red (242) one so you can actually get it apart at a later date.
>
> --
> DougW
>
06-20-2006, 01:35 PM
#9
Guest
Posts: n/a
Re: Thread-loc on CB antenna?
Correct me if I'm wrong Doug, but isn't the blue Loc-Tite the removable? I
am pretty sure 242 is blue. but I'm too lazy to go and look in the shop.
Chris
"DougW" <post.replies@invalid.address> wrote in message
news:3sGlg.57828$9c6.18046@dukeread11...
> aGraham did pass the time by typing:
>> For some reason my antenna mast keeps vibrating loose from the base..
>> many times I have checked it and it was only being held by a couple of
>> threads. If I put a but of loc-tite on it will it still work correctly?
>
> Yes. loc-tite only fills the cavities, just use a teeny drop.
>
> Use the red (242) one so you can actually get it apart at a later date.
>
> --
> DougW
>
am pretty sure 242 is blue. but I'm too lazy to go and look in the shop.
Chris
"DougW" <post.replies@invalid.address> wrote in message
news:3sGlg.57828$9c6.18046@dukeread11...
> aGraham did pass the time by typing:
>> For some reason my antenna mast keeps vibrating loose from the base..
>> many times I have checked it and it was only being held by a couple of
>> threads. If I put a but of loc-tite on it will it still work correctly?
>
> Yes. loc-tite only fills the cavities, just use a teeny drop.
>
> Use the red (242) one so you can actually get it apart at a later date.
>
> --
> DougW
>
06-20-2006, 01:35 PM
#10
Guest
Posts: n/a
Re: Thread-loc on CB antenna?
Correct me if I'm wrong Doug, but isn't the blue Loc-Tite the removable? I
am pretty sure 242 is blue. but I'm too lazy to go and look in the shop.
Chris
"DougW" <post.replies@invalid.address> wrote in message
news:3sGlg.57828$9c6.18046@dukeread11...
> aGraham did pass the time by typing:
>> For some reason my antenna mast keeps vibrating loose from the base..
>> many times I have checked it and it was only being held by a couple of
>> threads. If I put a but of loc-tite on it will it still work correctly?
>
> Yes. loc-tite only fills the cavities, just use a teeny drop.
>
> Use the red (242) one so you can actually get it apart at a later date.
>
> --
> DougW
>
am pretty sure 242 is blue. but I'm too lazy to go and look in the shop.
Chris
"DougW" <post.replies@invalid.address> wrote in message
news:3sGlg.57828$9c6.18046@dukeread11...
> aGraham did pass the time by typing:
>> For some reason my antenna mast keeps vibrating loose from the base..
>> many times I have checked it and it was only being held by a couple of
>> threads. If I put a but of loc-tite on it will it still work correctly?
>
> Yes. loc-tite only fills the cavities, just use a teeny drop.
>
> Use the red (242) one so you can actually get it apart at a later date.
>
> --
> DougW
>
