Thought my Rubicon could fly - oops
#31
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
Really wish I had so much money I could just jump a Rubi without a care in
the world... wow...
Jeeps aren't rally trucks... that said, take it to the dealer, tell them
what you did, and see how much of a dent (or not) that'll put in your bank.
I really wouldn't drive it around not knowing what you've done. If
something gives on the highway, it isn't just going to be your life at risk.
Eric
99 TJ SE
"swbell" <kerygma2@swbell.net> wrote in message
news:BEEF374B.339F3%kerygma2@swbell.net...
> While driving Saturday, I tried to see how high I could jump my 03
> Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
> MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into
> it,
> I'll check the axle, etc.
>
>
the world... wow...
Jeeps aren't rally trucks... that said, take it to the dealer, tell them
what you did, and see how much of a dent (or not) that'll put in your bank.
I really wouldn't drive it around not knowing what you've done. If
something gives on the highway, it isn't just going to be your life at risk.
Eric
99 TJ SE
"swbell" <kerygma2@swbell.net> wrote in message
news:BEEF374B.339F3%kerygma2@swbell.net...
> While driving Saturday, I tried to see how high I could jump my 03
> Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
> MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into
> it,
> I'll check the axle, etc.
>
>
#32
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
Really wish I had so much money I could just jump a Rubi without a care in
the world... wow...
Jeeps aren't rally trucks... that said, take it to the dealer, tell them
what you did, and see how much of a dent (or not) that'll put in your bank.
I really wouldn't drive it around not knowing what you've done. If
something gives on the highway, it isn't just going to be your life at risk.
Eric
99 TJ SE
"swbell" <kerygma2@swbell.net> wrote in message
news:BEEF374B.339F3%kerygma2@swbell.net...
> While driving Saturday, I tried to see how high I could jump my 03
> Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
> MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into
> it,
> I'll check the axle, etc.
>
>
the world... wow...
Jeeps aren't rally trucks... that said, take it to the dealer, tell them
what you did, and see how much of a dent (or not) that'll put in your bank.
I really wouldn't drive it around not knowing what you've done. If
something gives on the highway, it isn't just going to be your life at risk.
Eric
99 TJ SE
"swbell" <kerygma2@swbell.net> wrote in message
news:BEEF374B.339F3%kerygma2@swbell.net...
> While driving Saturday, I tried to see how high I could jump my 03
> Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
> MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into
> it,
> I'll check the axle, etc.
>
>
#33
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
Really wish I had so much money I could just jump a Rubi without a care in
the world... wow...
Jeeps aren't rally trucks... that said, take it to the dealer, tell them
what you did, and see how much of a dent (or not) that'll put in your bank.
I really wouldn't drive it around not knowing what you've done. If
something gives on the highway, it isn't just going to be your life at risk.
Eric
99 TJ SE
"swbell" <kerygma2@swbell.net> wrote in message
news:BEEF374B.339F3%kerygma2@swbell.net...
> While driving Saturday, I tried to see how high I could jump my 03
> Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
> MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into
> it,
> I'll check the axle, etc.
>
>
the world... wow...
Jeeps aren't rally trucks... that said, take it to the dealer, tell them
what you did, and see how much of a dent (or not) that'll put in your bank.
I really wouldn't drive it around not knowing what you've done. If
something gives on the highway, it isn't just going to be your life at risk.
Eric
99 TJ SE
"swbell" <kerygma2@swbell.net> wrote in message
news:BEEF374B.339F3%kerygma2@swbell.net...
> While driving Saturday, I tried to see how high I could jump my 03
> Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
> MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into
> it,
> I'll check the axle, etc.
>
>
#34
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
in article BEEF374B.339F3%kerygma2@swbell.net, swbell at kerygma2@swbell.net
wrote on 7/4/05 6:58 PM:
Video is here:
http://www.kerygma.org/nelson/Gilmer/video
> While driving Saturday, I tried to see how high I could jump my 03 Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31 MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into it,
> I'll check the axle, etc.
>
>
wrote on 7/4/05 6:58 PM:
Video is here:
http://www.kerygma.org/nelson/Gilmer/video
> While driving Saturday, I tried to see how high I could jump my 03 Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31 MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into it,
> I'll check the axle, etc.
>
>
#35
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
in article BEEF374B.339F3%kerygma2@swbell.net, swbell at kerygma2@swbell.net
wrote on 7/4/05 6:58 PM:
Video is here:
http://www.kerygma.org/nelson/Gilmer/video
> While driving Saturday, I tried to see how high I could jump my 03 Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31 MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into it,
> I'll check the axle, etc.
>
>
wrote on 7/4/05 6:58 PM:
Video is here:
http://www.kerygma.org/nelson/Gilmer/video
> While driving Saturday, I tried to see how high I could jump my 03 Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31 MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into it,
> I'll check the axle, etc.
>
>
#36
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
in article BEEF374B.339F3%kerygma2@swbell.net, swbell at kerygma2@swbell.net
wrote on 7/4/05 6:58 PM:
Video is here:
http://www.kerygma.org/nelson/Gilmer/video
> While driving Saturday, I tried to see how high I could jump my 03 Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31 MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into it,
> I'll check the axle, etc.
>
>
wrote on 7/4/05 6:58 PM:
Video is here:
http://www.kerygma.org/nelson/Gilmer/video
> While driving Saturday, I tried to see how high I could jump my 03 Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31 MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into it,
> I'll check the axle, etc.
>
>
#37
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
in article BEEF374B.339F3%kerygma2@swbell.net, swbell at kerygma2@swbell.net
wrote on 7/4/05 6:58 PM:
Video is here:
http://www.kerygma.org/nelson/Gilmer/video
> While driving Saturday, I tried to see how high I could jump my 03 Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31 MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into it,
> I'll check the axle, etc.
>
>
wrote on 7/4/05 6:58 PM:
Video is here:
http://www.kerygma.org/nelson/Gilmer/video
> While driving Saturday, I tried to see how high I could jump my 03 Rubicon.I
> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31 MTRs.
> From the video, it appears I leveled out at 5 feet.
>
> After hitting the ground, my right front wheel was missing about eight
> inches off the inside rim. Later that day, I noticed that I had gear oil
> leaking from my right front axle. Seems the seal is bad (at least).
>
> However, the Jeep drives fine, with no steering problems at all.
>
> Can anyone provide an outline for changing the seal? After I tear into it,
> I'll check the axle, etc.
>
>
#38
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
in article RGoye.100499$6g3.65760@tornado.texas.rr.com, Eric at
gymrat@baileyscorner.com wrote on 7/5/05 12:14 AM:
How much do you worry when driving off road? I admit that what I did was a
little extreme, but I've got a Jeep to enjoy it - not to worry about
scratching it.
> Really wish I had so much money I could just jump a Rubi without a care in
> the world... wow...
>
> Jeeps aren't rally trucks... that said, take it to the dealer, tell them
> what you did, and see how much of a dent (or not) that'll put in your bank.
> I really wouldn't drive it around not knowing what you've done. If
> something gives on the highway, it isn't just going to be your life at risk.
>
> Eric
> 99 TJ SE
> "swbell" <kerygma2@swbell.net> wrote in message
> news:BEEF374B.339F3%kerygma2@swbell.net...
>> While driving Saturday, I tried to see how high I could jump my 03
>> Rubicon.I
>> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
>> MTRs.
>> From the video, it appears I leveled out at 5 feet.
>>
>> After hitting the ground, my right front wheel was missing about eight
>> inches off the inside rim. Later that day, I noticed that I had gear oil
>> leaking from my right front axle. Seems the seal is bad (at least).
>>
>> However, the Jeep drives fine, with no steering problems at all.
>>
>> Can anyone provide an outline for changing the seal? After I tear into
>> it,
>> I'll check the axle, etc.
>>
>>
>
>
gymrat@baileyscorner.com wrote on 7/5/05 12:14 AM:
How much do you worry when driving off road? I admit that what I did was a
little extreme, but I've got a Jeep to enjoy it - not to worry about
scratching it.
> Really wish I had so much money I could just jump a Rubi without a care in
> the world... wow...
>
> Jeeps aren't rally trucks... that said, take it to the dealer, tell them
> what you did, and see how much of a dent (or not) that'll put in your bank.
> I really wouldn't drive it around not knowing what you've done. If
> something gives on the highway, it isn't just going to be your life at risk.
>
> Eric
> 99 TJ SE
> "swbell" <kerygma2@swbell.net> wrote in message
> news:BEEF374B.339F3%kerygma2@swbell.net...
>> While driving Saturday, I tried to see how high I could jump my 03
>> Rubicon.I
>> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
>> MTRs.
>> From the video, it appears I leveled out at 5 feet.
>>
>> After hitting the ground, my right front wheel was missing about eight
>> inches off the inside rim. Later that day, I noticed that I had gear oil
>> leaking from my right front axle. Seems the seal is bad (at least).
>>
>> However, the Jeep drives fine, with no steering problems at all.
>>
>> Can anyone provide an outline for changing the seal? After I tear into
>> it,
>> I'll check the axle, etc.
>>
>>
>
>
#39
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
in article RGoye.100499$6g3.65760@tornado.texas.rr.com, Eric at
gymrat@baileyscorner.com wrote on 7/5/05 12:14 AM:
How much do you worry when driving off road? I admit that what I did was a
little extreme, but I've got a Jeep to enjoy it - not to worry about
scratching it.
> Really wish I had so much money I could just jump a Rubi without a care in
> the world... wow...
>
> Jeeps aren't rally trucks... that said, take it to the dealer, tell them
> what you did, and see how much of a dent (or not) that'll put in your bank.
> I really wouldn't drive it around not knowing what you've done. If
> something gives on the highway, it isn't just going to be your life at risk.
>
> Eric
> 99 TJ SE
> "swbell" <kerygma2@swbell.net> wrote in message
> news:BEEF374B.339F3%kerygma2@swbell.net...
>> While driving Saturday, I tried to see how high I could jump my 03
>> Rubicon.I
>> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
>> MTRs.
>> From the video, it appears I leveled out at 5 feet.
>>
>> After hitting the ground, my right front wheel was missing about eight
>> inches off the inside rim. Later that day, I noticed that I had gear oil
>> leaking from my right front axle. Seems the seal is bad (at least).
>>
>> However, the Jeep drives fine, with no steering problems at all.
>>
>> Can anyone provide an outline for changing the seal? After I tear into
>> it,
>> I'll check the axle, etc.
>>
>>
>
>
gymrat@baileyscorner.com wrote on 7/5/05 12:14 AM:
How much do you worry when driving off road? I admit that what I did was a
little extreme, but I've got a Jeep to enjoy it - not to worry about
scratching it.
> Really wish I had so much money I could just jump a Rubi without a care in
> the world... wow...
>
> Jeeps aren't rally trucks... that said, take it to the dealer, tell them
> what you did, and see how much of a dent (or not) that'll put in your bank.
> I really wouldn't drive it around not knowing what you've done. If
> something gives on the highway, it isn't just going to be your life at risk.
>
> Eric
> 99 TJ SE
> "swbell" <kerygma2@swbell.net> wrote in message
> news:BEEF374B.339F3%kerygma2@swbell.net...
>> While driving Saturday, I tried to see how high I could jump my 03
>> Rubicon.I
>> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
>> MTRs.
>> From the video, it appears I leveled out at 5 feet.
>>
>> After hitting the ground, my right front wheel was missing about eight
>> inches off the inside rim. Later that day, I noticed that I had gear oil
>> leaking from my right front axle. Seems the seal is bad (at least).
>>
>> However, the Jeep drives fine, with no steering problems at all.
>>
>> Can anyone provide an outline for changing the seal? After I tear into
>> it,
>> I'll check the axle, etc.
>>
>>
>
>
#40
Guest
Posts: n/a
Re: Thought my Rubicon could fly - oops
in article RGoye.100499$6g3.65760@tornado.texas.rr.com, Eric at
gymrat@baileyscorner.com wrote on 7/5/05 12:14 AM:
How much do you worry when driving off road? I admit that what I did was a
little extreme, but I've got a Jeep to enjoy it - not to worry about
scratching it.
> Really wish I had so much money I could just jump a Rubi without a care in
> the world... wow...
>
> Jeeps aren't rally trucks... that said, take it to the dealer, tell them
> what you did, and see how much of a dent (or not) that'll put in your bank.
> I really wouldn't drive it around not knowing what you've done. If
> something gives on the highway, it isn't just going to be your life at risk.
>
> Eric
> 99 TJ SE
> "swbell" <kerygma2@swbell.net> wrote in message
> news:BEEF374B.339F3%kerygma2@swbell.net...
>> While driving Saturday, I tried to see how high I could jump my 03
>> Rubicon.I
>> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
>> MTRs.
>> From the video, it appears I leveled out at 5 feet.
>>
>> After hitting the ground, my right front wheel was missing about eight
>> inches off the inside rim. Later that day, I noticed that I had gear oil
>> leaking from my right front axle. Seems the seal is bad (at least).
>>
>> However, the Jeep drives fine, with no steering problems at all.
>>
>> Can anyone provide an outline for changing the seal? After I tear into
>> it,
>> I'll check the axle, etc.
>>
>>
>
>
gymrat@baileyscorner.com wrote on 7/5/05 12:14 AM:
How much do you worry when driving off road? I admit that what I did was a
little extreme, but I've got a Jeep to enjoy it - not to worry about
scratching it.
> Really wish I had so much money I could just jump a Rubi without a care in
> the world... wow...
>
> Jeeps aren't rally trucks... that said, take it to the dealer, tell them
> what you did, and see how much of a dent (or not) that'll put in your bank.
> I really wouldn't drive it around not knowing what you've done. If
> something gives on the highway, it isn't just going to be your life at risk.
>
> Eric
> 99 TJ SE
> "swbell" <kerygma2@swbell.net> wrote in message
> news:BEEF374B.339F3%kerygma2@swbell.net...
>> While driving Saturday, I tried to see how high I could jump my 03
>> Rubicon.I
>> was aired down to 18 lbs, and had my sway bar disconnected. Stock 31
>> MTRs.
>> From the video, it appears I leveled out at 5 feet.
>>
>> After hitting the ground, my right front wheel was missing about eight
>> inches off the inside rim. Later that day, I noticed that I had gear oil
>> leaking from my right front axle. Seems the seal is bad (at least).
>>
>> However, the Jeep drives fine, with no steering problems at all.
>>
>> Can anyone provide an outline for changing the seal? After I tear into
>> it,
>> I'll check the axle, etc.
>>
>>
>
>