Tera or JB Conversion SYE
#31
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
How easily can it be done and what is the procedure for calibrating the
speedometer with that super-short kit TW? It's a real PITA for most
electronic speedometers as I am in the business and it's an ongoing
issue for those in my industry. We're left with expensive kits like
Hypertech for calibrating new speedometers which at $340 and up not
including labor, is always an issue for my customers. There has never
been a time when I didn't wish all of the trucks I have work done on
didn't have a simple speedometer gear so speedometer calibration could
once again be simple, quick, and inexpensive to do.
Is there a quick/simple/inexpensive way to calibrate the Jeep's
speedometer without spending major $$$ for things like the Truespeed
calibrator or Hypertech programmer? If there isn't, that would be
reason enough for me to stay with the standard non-super shorty SYE kit
like I have now which works fine for even very tall lifts (within reason
on "very tall").
Jerry
TW wrote:
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
>
>>The super-short SYE kit provides for a slightly longer driveshaft which on
>>a vehicle like a Wrangler is always a good thing. Longer driveshafts
>>decrease the u-joint angles which reduces the vibration problem for tall
>>lifts. Shorter lifts really wouldn't benefit much from a super-short SYE
>>kit.
>>
>
>
> I realise that shorter lifts wouldn't really benefit much from a supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit when
> I go to my next phase to upgrades. Just trying to build things so that they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
speedometer with that super-short kit TW? It's a real PITA for most
electronic speedometers as I am in the business and it's an ongoing
issue for those in my industry. We're left with expensive kits like
Hypertech for calibrating new speedometers which at $340 and up not
including labor, is always an issue for my customers. There has never
been a time when I didn't wish all of the trucks I have work done on
didn't have a simple speedometer gear so speedometer calibration could
once again be simple, quick, and inexpensive to do.
Is there a quick/simple/inexpensive way to calibrate the Jeep's
speedometer without spending major $$$ for things like the Truespeed
calibrator or Hypertech programmer? If there isn't, that would be
reason enough for me to stay with the standard non-super shorty SYE kit
like I have now which works fine for even very tall lifts (within reason
on "very tall").
Jerry
TW wrote:
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
>
>>The super-short SYE kit provides for a slightly longer driveshaft which on
>>a vehicle like a Wrangler is always a good thing. Longer driveshafts
>>decrease the u-joint angles which reduces the vibration problem for tall
>>lifts. Shorter lifts really wouldn't benefit much from a super-short SYE
>>kit.
>>
>
>
> I realise that shorter lifts wouldn't really benefit much from a supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit when
> I go to my next phase to upgrades. Just trying to build things so that they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
#32
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
How easily can it be done and what is the procedure for calibrating the
speedometer with that super-short kit TW? It's a real PITA for most
electronic speedometers as I am in the business and it's an ongoing
issue for those in my industry. We're left with expensive kits like
Hypertech for calibrating new speedometers which at $340 and up not
including labor, is always an issue for my customers. There has never
been a time when I didn't wish all of the trucks I have work done on
didn't have a simple speedometer gear so speedometer calibration could
once again be simple, quick, and inexpensive to do.
Is there a quick/simple/inexpensive way to calibrate the Jeep's
speedometer without spending major $$$ for things like the Truespeed
calibrator or Hypertech programmer? If there isn't, that would be
reason enough for me to stay with the standard non-super shorty SYE kit
like I have now which works fine for even very tall lifts (within reason
on "very tall").
Jerry
TW wrote:
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
>
>>The super-short SYE kit provides for a slightly longer driveshaft which on
>>a vehicle like a Wrangler is always a good thing. Longer driveshafts
>>decrease the u-joint angles which reduces the vibration problem for tall
>>lifts. Shorter lifts really wouldn't benefit much from a super-short SYE
>>kit.
>>
>
>
> I realise that shorter lifts wouldn't really benefit much from a supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit when
> I go to my next phase to upgrades. Just trying to build things so that they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
speedometer with that super-short kit TW? It's a real PITA for most
electronic speedometers as I am in the business and it's an ongoing
issue for those in my industry. We're left with expensive kits like
Hypertech for calibrating new speedometers which at $340 and up not
including labor, is always an issue for my customers. There has never
been a time when I didn't wish all of the trucks I have work done on
didn't have a simple speedometer gear so speedometer calibration could
once again be simple, quick, and inexpensive to do.
Is there a quick/simple/inexpensive way to calibrate the Jeep's
speedometer without spending major $$$ for things like the Truespeed
calibrator or Hypertech programmer? If there isn't, that would be
reason enough for me to stay with the standard non-super shorty SYE kit
like I have now which works fine for even very tall lifts (within reason
on "very tall").
Jerry
TW wrote:
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
>
>>The super-short SYE kit provides for a slightly longer driveshaft which on
>>a vehicle like a Wrangler is always a good thing. Longer driveshafts
>>decrease the u-joint angles which reduces the vibration problem for tall
>>lifts. Shorter lifts really wouldn't benefit much from a super-short SYE
>>kit.
>>
>
>
> I realise that shorter lifts wouldn't really benefit much from a supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit when
> I go to my next phase to upgrades. Just trying to build things so that they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
#33
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
How easily can it be done and what is the procedure for calibrating the
speedometer with that super-short kit TW? It's a real PITA for most
electronic speedometers as I am in the business and it's an ongoing
issue for those in my industry. We're left with expensive kits like
Hypertech for calibrating new speedometers which at $340 and up not
including labor, is always an issue for my customers. There has never
been a time when I didn't wish all of the trucks I have work done on
didn't have a simple speedometer gear so speedometer calibration could
once again be simple, quick, and inexpensive to do.
Is there a quick/simple/inexpensive way to calibrate the Jeep's
speedometer without spending major $$$ for things like the Truespeed
calibrator or Hypertech programmer? If there isn't, that would be
reason enough for me to stay with the standard non-super shorty SYE kit
like I have now which works fine for even very tall lifts (within reason
on "very tall").
Jerry
TW wrote:
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
>
>>The super-short SYE kit provides for a slightly longer driveshaft which on
>>a vehicle like a Wrangler is always a good thing. Longer driveshafts
>>decrease the u-joint angles which reduces the vibration problem for tall
>>lifts. Shorter lifts really wouldn't benefit much from a super-short SYE
>>kit.
>>
>
>
> I realise that shorter lifts wouldn't really benefit much from a supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit when
> I go to my next phase to upgrades. Just trying to build things so that they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
speedometer with that super-short kit TW? It's a real PITA for most
electronic speedometers as I am in the business and it's an ongoing
issue for those in my industry. We're left with expensive kits like
Hypertech for calibrating new speedometers which at $340 and up not
including labor, is always an issue for my customers. There has never
been a time when I didn't wish all of the trucks I have work done on
didn't have a simple speedometer gear so speedometer calibration could
once again be simple, quick, and inexpensive to do.
Is there a quick/simple/inexpensive way to calibrate the Jeep's
speedometer without spending major $$$ for things like the Truespeed
calibrator or Hypertech programmer? If there isn't, that would be
reason enough for me to stay with the standard non-super shorty SYE kit
like I have now which works fine for even very tall lifts (within reason
on "very tall").
Jerry
TW wrote:
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
>
>>The super-short SYE kit provides for a slightly longer driveshaft which on
>>a vehicle like a Wrangler is always a good thing. Longer driveshafts
>>decrease the u-joint angles which reduces the vibration problem for tall
>>lifts. Shorter lifts really wouldn't benefit much from a super-short SYE
>>kit.
>>
>
>
> I realise that shorter lifts wouldn't really benefit much from a supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit when
> I go to my next phase to upgrades. Just trying to build things so that they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
#34
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
If you are looking to avoid "incrementalism", skip the SYE and get an Atlas
t-case.
Carl
"TW" <attw@wave.co.nz (delete this)> wrote in message
news:dd0u2l$op4$1@lust.ihug.co.nz...
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
> > The super-short SYE kit provides for a slightly longer driveshaft which
on
> > a vehicle like a Wrangler is always a good thing. Longer driveshafts
> > decrease the u-joint angles which reduces the vibration problem for tall
> > lifts. Shorter lifts really wouldn't benefit much from a super-short
SYE
> > kit.
> >
>
> I realise that shorter lifts wouldn't really benefit much from a
supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit
when
> I go to my next phase to upgrades. Just trying to build things so that
they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
t-case.
Carl
"TW" <attw@wave.co.nz (delete this)> wrote in message
news:dd0u2l$op4$1@lust.ihug.co.nz...
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
> > The super-short SYE kit provides for a slightly longer driveshaft which
on
> > a vehicle like a Wrangler is always a good thing. Longer driveshafts
> > decrease the u-joint angles which reduces the vibration problem for tall
> > lifts. Shorter lifts really wouldn't benefit much from a super-short
SYE
> > kit.
> >
>
> I realise that shorter lifts wouldn't really benefit much from a
supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit
when
> I go to my next phase to upgrades. Just trying to build things so that
they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
#35
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
If you are looking to avoid "incrementalism", skip the SYE and get an Atlas
t-case.
Carl
"TW" <attw@wave.co.nz (delete this)> wrote in message
news:dd0u2l$op4$1@lust.ihug.co.nz...
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
> > The super-short SYE kit provides for a slightly longer driveshaft which
on
> > a vehicle like a Wrangler is always a good thing. Longer driveshafts
> > decrease the u-joint angles which reduces the vibration problem for tall
> > lifts. Shorter lifts really wouldn't benefit much from a super-short
SYE
> > kit.
> >
>
> I realise that shorter lifts wouldn't really benefit much from a
supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit
when
> I go to my next phase to upgrades. Just trying to build things so that
they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
t-case.
Carl
"TW" <attw@wave.co.nz (delete this)> wrote in message
news:dd0u2l$op4$1@lust.ihug.co.nz...
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
> > The super-short SYE kit provides for a slightly longer driveshaft which
on
> > a vehicle like a Wrangler is always a good thing. Longer driveshafts
> > decrease the u-joint angles which reduces the vibration problem for tall
> > lifts. Shorter lifts really wouldn't benefit much from a super-short
SYE
> > kit.
> >
>
> I realise that shorter lifts wouldn't really benefit much from a
supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit
when
> I go to my next phase to upgrades. Just trying to build things so that
they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
#36
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
If you are looking to avoid "incrementalism", skip the SYE and get an Atlas
t-case.
Carl
"TW" <attw@wave.co.nz (delete this)> wrote in message
news:dd0u2l$op4$1@lust.ihug.co.nz...
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
> > The super-short SYE kit provides for a slightly longer driveshaft which
on
> > a vehicle like a Wrangler is always a good thing. Longer driveshafts
> > decrease the u-joint angles which reduces the vibration problem for tall
> > lifts. Shorter lifts really wouldn't benefit much from a super-short
SYE
> > kit.
> >
>
> I realise that shorter lifts wouldn't really benefit much from a
supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit
when
> I go to my next phase to upgrades. Just trying to build things so that
they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
t-case.
Carl
"TW" <attw@wave.co.nz (delete this)> wrote in message
news:dd0u2l$op4$1@lust.ihug.co.nz...
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
> > The super-short SYE kit provides for a slightly longer driveshaft which
on
> > a vehicle like a Wrangler is always a good thing. Longer driveshafts
> > decrease the u-joint angles which reduces the vibration problem for tall
> > lifts. Shorter lifts really wouldn't benefit much from a super-short
SYE
> > kit.
> >
>
> I realise that shorter lifts wouldn't really benefit much from a
supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit
when
> I go to my next phase to upgrades. Just trying to build things so that
they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
#37
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
If you are looking to avoid "incrementalism", skip the SYE and get an Atlas
t-case.
Carl
"TW" <attw@wave.co.nz (delete this)> wrote in message
news:dd0u2l$op4$1@lust.ihug.co.nz...
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
> > The super-short SYE kit provides for a slightly longer driveshaft which
on
> > a vehicle like a Wrangler is always a good thing. Longer driveshafts
> > decrease the u-joint angles which reduces the vibration problem for tall
> > lifts. Shorter lifts really wouldn't benefit much from a super-short
SYE
> > kit.
> >
>
> I realise that shorter lifts wouldn't really benefit much from a
supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit
when
> I go to my next phase to upgrades. Just trying to build things so that
they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
t-case.
Carl
"TW" <attw@wave.co.nz (delete this)> wrote in message
news:dd0u2l$op4$1@lust.ihug.co.nz...
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:VbOIe.50909$Eo.29648@fed1read04...
> > The super-short SYE kit provides for a slightly longer driveshaft which
on
> > a vehicle like a Wrangler is always a good thing. Longer driveshafts
> > decrease the u-joint angles which reduces the vibration problem for tall
> > lifts. Shorter lifts really wouldn't benefit much from a super-short
SYE
> > kit.
> >
>
> I realise that shorter lifts wouldn't really benefit much from a
supershort
> and thanks for explaining the difference. However, my logic was that for
> $75 difference, I could get the super shorty and do the labour once. This
> would make me ready for upgrading to higher suspension or belly-up kit
when
> I go to my next phase to upgrades. Just trying to build things so that
they
> would not have to be replaced every time I do something.
>
> I think the additional advantage is that speedo can be electronically
> calibrated to whatever I change my ratios and tyres to without having to
> spend money on speedo gears.
>
> Thanks
> TW
>
>
>
#38
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42f42aba_3@newsfeed.slurp.net...
> If you are looking to avoid "incrementalism", skip the SYE and get an
> Atlas
> t-case.
>
> Carl
>
Ooooh, you are tempting me...... But thats an expensive and mean piece of
kit.
TW
news:42f42aba_3@newsfeed.slurp.net...
> If you are looking to avoid "incrementalism", skip the SYE and get an
> Atlas
> t-case.
>
> Carl
>
Ooooh, you are tempting me...... But thats an expensive and mean piece of
kit.
TW
#39
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42f42aba_3@newsfeed.slurp.net...
> If you are looking to avoid "incrementalism", skip the SYE and get an
> Atlas
> t-case.
>
> Carl
>
Ooooh, you are tempting me...... But thats an expensive and mean piece of
kit.
TW
news:42f42aba_3@newsfeed.slurp.net...
> If you are looking to avoid "incrementalism", skip the SYE and get an
> Atlas
> t-case.
>
> Carl
>
Ooooh, you are tempting me...... But thats an expensive and mean piece of
kit.
TW
#40
Guest
Posts: n/a
Re: Tera or JB Conversion SYE
"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:42f42aba_3@newsfeed.slurp.net...
> If you are looking to avoid "incrementalism", skip the SYE and get an
> Atlas
> t-case.
>
> Carl
>
Ooooh, you are tempting me...... But thats an expensive and mean piece of
kit.
TW
news:42f42aba_3@newsfeed.slurp.net...
> If you are looking to avoid "incrementalism", skip the SYE and get an
> Atlas
> t-case.
>
> Carl
>
Ooooh, you are tempting me...... But thats an expensive and mean piece of
kit.
TW