Tail shaft bushing
#31
Guest
Posts: n/a
Re: Tail shaft bushing
On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
> I thought that was what it's called...
Hello Gerald,
My post was a sort of a general one, /not/ targeted at you personally at
all, and for this I apologize.
You see, some folks in Usenet have their own very personal definitions for
things which usually override the dictionaries, encyclopedia and thesauri
of the world -- and they can change at a moment's notice.
And sometimes these same folks are hobbyist abuse-reporters.
My comment was intended to be naught but a humorous flippancy relating to
this sad state of affairs, but alas, sometimes it does actually happen.
Even in this group.
Sorry for any confusion I may have caused.
>
> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>
>>
>>> Re: Tail shaft bushing
>>
>>
>> This subject title should be changed somehow, before everyone gets
>> reported for using foul language.
>>
>>
>>
>>
>>
>>
> I thought that was what it's called...
Hello Gerald,
My post was a sort of a general one, /not/ targeted at you personally at
all, and for this I apologize.
You see, some folks in Usenet have their own very personal definitions for
things which usually override the dictionaries, encyclopedia and thesauri
of the world -- and they can change at a moment's notice.
And sometimes these same folks are hobbyist abuse-reporters.
My comment was intended to be naught but a humorous flippancy relating to
this sad state of affairs, but alas, sometimes it does actually happen.
Even in this group.
Sorry for any confusion I may have caused.
>
> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>
>>
>>> Re: Tail shaft bushing
>>
>>
>> This subject title should be changed somehow, before everyone gets
>> reported for using foul language.
>>
>>
>>
>>
>>
>>
#32
Guest
Posts: n/a
Re: Tail shaft bushing
On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
> I thought that was what it's called...
Hello Gerald,
My post was a sort of a general one, /not/ targeted at you personally at
all, and for this I apologize.
You see, some folks in Usenet have their own very personal definitions for
things which usually override the dictionaries, encyclopedia and thesauri
of the world -- and they can change at a moment's notice.
And sometimes these same folks are hobbyist abuse-reporters.
My comment was intended to be naught but a humorous flippancy relating to
this sad state of affairs, but alas, sometimes it does actually happen.
Even in this group.
Sorry for any confusion I may have caused.
>
> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>
>>
>>> Re: Tail shaft bushing
>>
>>
>> This subject title should be changed somehow, before everyone gets
>> reported for using foul language.
>>
>>
>>
>>
>>
>>
> I thought that was what it's called...
Hello Gerald,
My post was a sort of a general one, /not/ targeted at you personally at
all, and for this I apologize.
You see, some folks in Usenet have their own very personal definitions for
things which usually override the dictionaries, encyclopedia and thesauri
of the world -- and they can change at a moment's notice.
And sometimes these same folks are hobbyist abuse-reporters.
My comment was intended to be naught but a humorous flippancy relating to
this sad state of affairs, but alas, sometimes it does actually happen.
Even in this group.
Sorry for any confusion I may have caused.
>
> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>
>>
>>> Re: Tail shaft bushing
>>
>>
>> This subject title should be changed somehow, before everyone gets
>> reported for using foul language.
>>
>>
>>
>>
>>
>>
#33
Guest
Posts: n/a
Re: Tail shaft bushing
On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
> I thought that was what it's called...
Hello Gerald,
My post was a sort of a general one, /not/ targeted at you personally at
all, and for this I apologize.
You see, some folks in Usenet have their own very personal definitions for
things which usually override the dictionaries, encyclopedia and thesauri
of the world -- and they can change at a moment's notice.
And sometimes these same folks are hobbyist abuse-reporters.
My comment was intended to be naught but a humorous flippancy relating to
this sad state of affairs, but alas, sometimes it does actually happen.
Even in this group.
Sorry for any confusion I may have caused.
>
> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>
>>
>>> Re: Tail shaft bushing
>>
>>
>> This subject title should be changed somehow, before everyone gets
>> reported for using foul language.
>>
>>
>>
>>
>>
>>
> I thought that was what it's called...
Hello Gerald,
My post was a sort of a general one, /not/ targeted at you personally at
all, and for this I apologize.
You see, some folks in Usenet have their own very personal definitions for
things which usually override the dictionaries, encyclopedia and thesauri
of the world -- and they can change at a moment's notice.
And sometimes these same folks are hobbyist abuse-reporters.
My comment was intended to be naught but a humorous flippancy relating to
this sad state of affairs, but alas, sometimes it does actually happen.
Even in this group.
Sorry for any confusion I may have caused.
>
> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>
>>
>>> Re: Tail shaft bushing
>>
>>
>> This subject title should be changed somehow, before everyone gets
>> reported for using foul language.
>>
>>
>>
>>
>>
>>
#34
Guest
Posts: n/a
Re: Tail shaft bushing
No offense taken. Us "ole folks" don't know how to think like the younger
crowd.. Don't know it that's good or bad.
"Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
news:YJ7_h.155656$aG1.15893@pd7urf3no...
> On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
>
>> I thought that was what it's called...
>
> Hello Gerald,
>
> My post was a sort of a general one, /not/ targeted at you personally at
> all, and for this I apologize.
>
> You see, some folks in Usenet have their own very personal definitions for
> things which usually override the dictionaries, encyclopedia and thesauri
> of the world -- and they can change at a moment's notice.
>
> And sometimes these same folks are hobbyist abuse-reporters.
>
> My comment was intended to be naught but a humorous flippancy relating to
> this sad state of affairs, but alas, sometimes it does actually happen.
>
> Even in this group.
>
> Sorry for any confusion I may have caused.
>
>
>
>>
>> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
>> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>>
>>>
>>>> Re: Tail shaft bushing
>>>
>>>
>>> This subject title should be changed somehow, before everyone gets
>>> reported for using foul language.
>>>
>>>
>>>
>>>
>>>
>>>
>
crowd.. Don't know it that's good or bad.
"Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
news:YJ7_h.155656$aG1.15893@pd7urf3no...
> On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
>
>> I thought that was what it's called...
>
> Hello Gerald,
>
> My post was a sort of a general one, /not/ targeted at you personally at
> all, and for this I apologize.
>
> You see, some folks in Usenet have their own very personal definitions for
> things which usually override the dictionaries, encyclopedia and thesauri
> of the world -- and they can change at a moment's notice.
>
> And sometimes these same folks are hobbyist abuse-reporters.
>
> My comment was intended to be naught but a humorous flippancy relating to
> this sad state of affairs, but alas, sometimes it does actually happen.
>
> Even in this group.
>
> Sorry for any confusion I may have caused.
>
>
>
>>
>> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
>> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>>
>>>
>>>> Re: Tail shaft bushing
>>>
>>>
>>> This subject title should be changed somehow, before everyone gets
>>> reported for using foul language.
>>>
>>>
>>>
>>>
>>>
>>>
>
#35
Guest
Posts: n/a
Re: Tail shaft bushing
No offense taken. Us "ole folks" don't know how to think like the younger
crowd.. Don't know it that's good or bad.
"Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
news:YJ7_h.155656$aG1.15893@pd7urf3no...
> On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
>
>> I thought that was what it's called...
>
> Hello Gerald,
>
> My post was a sort of a general one, /not/ targeted at you personally at
> all, and for this I apologize.
>
> You see, some folks in Usenet have their own very personal definitions for
> things which usually override the dictionaries, encyclopedia and thesauri
> of the world -- and they can change at a moment's notice.
>
> And sometimes these same folks are hobbyist abuse-reporters.
>
> My comment was intended to be naught but a humorous flippancy relating to
> this sad state of affairs, but alas, sometimes it does actually happen.
>
> Even in this group.
>
> Sorry for any confusion I may have caused.
>
>
>
>>
>> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
>> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>>
>>>
>>>> Re: Tail shaft bushing
>>>
>>>
>>> This subject title should be changed somehow, before everyone gets
>>> reported for using foul language.
>>>
>>>
>>>
>>>
>>>
>>>
>
crowd.. Don't know it that's good or bad.
"Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
news:YJ7_h.155656$aG1.15893@pd7urf3no...
> On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
>
>> I thought that was what it's called...
>
> Hello Gerald,
>
> My post was a sort of a general one, /not/ targeted at you personally at
> all, and for this I apologize.
>
> You see, some folks in Usenet have their own very personal definitions for
> things which usually override the dictionaries, encyclopedia and thesauri
> of the world -- and they can change at a moment's notice.
>
> And sometimes these same folks are hobbyist abuse-reporters.
>
> My comment was intended to be naught but a humorous flippancy relating to
> this sad state of affairs, but alas, sometimes it does actually happen.
>
> Even in this group.
>
> Sorry for any confusion I may have caused.
>
>
>
>>
>> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
>> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>>
>>>
>>>> Re: Tail shaft bushing
>>>
>>>
>>> This subject title should be changed somehow, before everyone gets
>>> reported for using foul language.
>>>
>>>
>>>
>>>
>>>
>>>
>
#36
Guest
Posts: n/a
Re: Tail shaft bushing
No offense taken. Us "ole folks" don't know how to think like the younger
crowd.. Don't know it that's good or bad.
"Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
news:YJ7_h.155656$aG1.15893@pd7urf3no...
> On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
>
>> I thought that was what it's called...
>
> Hello Gerald,
>
> My post was a sort of a general one, /not/ targeted at you personally at
> all, and for this I apologize.
>
> You see, some folks in Usenet have their own very personal definitions for
> things which usually override the dictionaries, encyclopedia and thesauri
> of the world -- and they can change at a moment's notice.
>
> And sometimes these same folks are hobbyist abuse-reporters.
>
> My comment was intended to be naught but a humorous flippancy relating to
> this sad state of affairs, but alas, sometimes it does actually happen.
>
> Even in this group.
>
> Sorry for any confusion I may have caused.
>
>
>
>>
>> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
>> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>>
>>>
>>>> Re: Tail shaft bushing
>>>
>>>
>>> This subject title should be changed somehow, before everyone gets
>>> reported for using foul language.
>>>
>>>
>>>
>>>
>>>
>>>
>
crowd.. Don't know it that's good or bad.
"Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
news:YJ7_h.155656$aG1.15893@pd7urf3no...
> On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
>
>> I thought that was what it's called...
>
> Hello Gerald,
>
> My post was a sort of a general one, /not/ targeted at you personally at
> all, and for this I apologize.
>
> You see, some folks in Usenet have their own very personal definitions for
> things which usually override the dictionaries, encyclopedia and thesauri
> of the world -- and they can change at a moment's notice.
>
> And sometimes these same folks are hobbyist abuse-reporters.
>
> My comment was intended to be naught but a humorous flippancy relating to
> this sad state of affairs, but alas, sometimes it does actually happen.
>
> Even in this group.
>
> Sorry for any confusion I may have caused.
>
>
>
>>
>> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
>> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>>
>>>
>>>> Re: Tail shaft bushing
>>>
>>>
>>> This subject title should be changed somehow, before everyone gets
>>> reported for using foul language.
>>>
>>>
>>>
>>>
>>>
>>>
>
#37
Guest
Posts: n/a
Re: Tail shaft bushing
No offense taken. Us "ole folks" don't know how to think like the younger
crowd.. Don't know it that's good or bad.
"Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
news:YJ7_h.155656$aG1.15893@pd7urf3no...
> On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
>
>> I thought that was what it's called...
>
> Hello Gerald,
>
> My post was a sort of a general one, /not/ targeted at you personally at
> all, and for this I apologize.
>
> You see, some folks in Usenet have their own very personal definitions for
> things which usually override the dictionaries, encyclopedia and thesauri
> of the world -- and they can change at a moment's notice.
>
> And sometimes these same folks are hobbyist abuse-reporters.
>
> My comment was intended to be naught but a humorous flippancy relating to
> this sad state of affairs, but alas, sometimes it does actually happen.
>
> Even in this group.
>
> Sorry for any confusion I may have caused.
>
>
>
>>
>> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
>> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>>
>>>
>>>> Re: Tail shaft bushing
>>>
>>>
>>> This subject title should be changed somehow, before everyone gets
>>> reported for using foul language.
>>>
>>>
>>>
>>>
>>>
>>>
>
crowd.. Don't know it that's good or bad.
"Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
news:YJ7_h.155656$aG1.15893@pd7urf3no...
> On Wed, 02 May 2007 20:56:26 +0000, Gerald K4NHN wrote:
>
>> I thought that was what it's called...
>
> Hello Gerald,
>
> My post was a sort of a general one, /not/ targeted at you personally at
> all, and for this I apologize.
>
> You see, some folks in Usenet have their own very personal definitions for
> things which usually override the dictionaries, encyclopedia and thesauri
> of the world -- and they can change at a moment's notice.
>
> And sometimes these same folks are hobbyist abuse-reporters.
>
> My comment was intended to be naught but a humorous flippancy relating to
> this sad state of affairs, but alas, sometimes it does actually happen.
>
> Even in this group.
>
> Sorry for any confusion I may have caused.
>
>
>
>>
>> "Satin Fairbush" <satin@trim-it-carefully.com> wrote in message
>> news:hN6_h.155514$aG1.92326@pd7urf3no...
>>>
>>>
>>>> Re: Tail shaft bushing
>>>
>>>
>>> This subject title should be changed somehow, before everyone gets
>>> reported for using foul language.
>>>
>>>
>>>
>>>
>>>
>>>
>
Thread
Thread Starter
Forum
Replies
Last Post
carid
Jeep & 4x4 Items For Sale
0
08-19-2015 07:43 AM
L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III
Jeep Mailing List
12
11-18-2003 07:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)