Sway Bar Disconnects
11-10-2003, 08:49 PM
#1
Guest
Posts: n/a
Sway Bar Disconnects
Hi,
I was doing some offroading in Death Valley last week when I heard a big
clunk followed by smaller clunks when I went over bumps.
When I stopped, I figured out that I had broken one of the clips that hold
in the sway bar disconnects. Since I wasn't doing anything extreme, I had
not disconeected them.
Do I need to always disconnect them or was this unusual? Kind of a pain to
pull them everytime I go offroad. I thought that you only needed to
disconnect them for extreme articulation.
TIA,
Bruce
I was doing some offroading in Death Valley last week when I heard a big
clunk followed by smaller clunks when I went over bumps.
When I stopped, I figured out that I had broken one of the clips that hold
in the sway bar disconnects. Since I wasn't doing anything extreme, I had
not disconeected them.
Do I need to always disconnect them or was this unusual? Kind of a pain to
pull them everytime I go offroad. I thought that you only needed to
disconnect them for extreme articulation.
TIA,
Bruce
11-11-2003, 08:35 AM
#2
Guest
Posts: n/a
Re: Sway Bar Disconnects
I broke mine being rough on it. Wasn't trying to get any extreme
articulation, just trying to get up a rutted, pain-in-the-butt hill. A few
good bumps and one broke.
Oh well, it was a good excuse to get some Teraflex quick discos. :-)
Eric
99 TJ SE
"bhochuli" <bhochuli@cisco.com> wrote in message
news:1068515307.291394@sj-nntpcache-5...
> Hi,
>
> I was doing some offroading in Death Valley last week when I heard a big
> clunk followed by smaller clunks when I went over bumps.
>
> When I stopped, I figured out that I had broken one of the clips that hold
> in the sway bar disconnects. Since I wasn't doing anything extreme, I had
> not disconeected them.
>
> Do I need to always disconnect them or was this unusual? Kind of a pain to
> pull them everytime I go offroad. I thought that you only needed to
> disconnect them for extreme articulation.
>
> TIA,
>
> Bruce
>
>
articulation, just trying to get up a rutted, pain-in-the-butt hill. A few
good bumps and one broke.
Oh well, it was a good excuse to get some Teraflex quick discos. :-)
Eric
99 TJ SE
"bhochuli" <bhochuli@cisco.com> wrote in message
news:1068515307.291394@sj-nntpcache-5...
> Hi,
>
> I was doing some offroading in Death Valley last week when I heard a big
> clunk followed by smaller clunks when I went over bumps.
>
> When I stopped, I figured out that I had broken one of the clips that hold
> in the sway bar disconnects. Since I wasn't doing anything extreme, I had
> not disconeected them.
>
> Do I need to always disconnect them or was this unusual? Kind of a pain to
> pull them everytime I go offroad. I thought that you only needed to
> disconnect them for extreme articulation.
>
> TIA,
>
> Bruce
>
>
11-11-2003, 08:35 AM
#3
Guest
Posts: n/a
Re: Sway Bar Disconnects
I broke mine being rough on it. Wasn't trying to get any extreme
articulation, just trying to get up a rutted, pain-in-the-butt hill. A few
good bumps and one broke.
Oh well, it was a good excuse to get some Teraflex quick discos. :-)
Eric
99 TJ SE
"bhochuli" <bhochuli@cisco.com> wrote in message
news:1068515307.291394@sj-nntpcache-5...
> Hi,
>
> I was doing some offroading in Death Valley last week when I heard a big
> clunk followed by smaller clunks when I went over bumps.
>
> When I stopped, I figured out that I had broken one of the clips that hold
> in the sway bar disconnects. Since I wasn't doing anything extreme, I had
> not disconeected them.
>
> Do I need to always disconnect them or was this unusual? Kind of a pain to
> pull them everytime I go offroad. I thought that you only needed to
> disconnect them for extreme articulation.
>
> TIA,
>
> Bruce
>
>
articulation, just trying to get up a rutted, pain-in-the-butt hill. A few
good bumps and one broke.
Oh well, it was a good excuse to get some Teraflex quick discos. :-)
Eric
99 TJ SE
"bhochuli" <bhochuli@cisco.com> wrote in message
news:1068515307.291394@sj-nntpcache-5...
> Hi,
>
> I was doing some offroading in Death Valley last week when I heard a big
> clunk followed by smaller clunks when I went over bumps.
>
> When I stopped, I figured out that I had broken one of the clips that hold
> in the sway bar disconnects. Since I wasn't doing anything extreme, I had
> not disconeected them.
>
> Do I need to always disconnect them or was this unusual? Kind of a pain to
> pull them everytime I go offroad. I thought that you only needed to
> disconnect them for extreme articulation.
>
> TIA,
>
> Bruce
>
>
11-11-2003, 08:35 AM
#4
Guest
Posts: n/a
Re: Sway Bar Disconnects
I broke mine being rough on it. Wasn't trying to get any extreme
articulation, just trying to get up a rutted, pain-in-the-butt hill. A few
good bumps and one broke.
Oh well, it was a good excuse to get some Teraflex quick discos. :-)
Eric
99 TJ SE
"bhochuli" <bhochuli@cisco.com> wrote in message
news:1068515307.291394@sj-nntpcache-5...
> Hi,
>
> I was doing some offroading in Death Valley last week when I heard a big
> clunk followed by smaller clunks when I went over bumps.
>
> When I stopped, I figured out that I had broken one of the clips that hold
> in the sway bar disconnects. Since I wasn't doing anything extreme, I had
> not disconeected them.
>
> Do I need to always disconnect them or was this unusual? Kind of a pain to
> pull them everytime I go offroad. I thought that you only needed to
> disconnect them for extreme articulation.
>
> TIA,
>
> Bruce
>
>
articulation, just trying to get up a rutted, pain-in-the-butt hill. A few
good bumps and one broke.
Oh well, it was a good excuse to get some Teraflex quick discos. :-)
Eric
99 TJ SE
"bhochuli" <bhochuli@cisco.com> wrote in message
news:1068515307.291394@sj-nntpcache-5...
> Hi,
>
> I was doing some offroading in Death Valley last week when I heard a big
> clunk followed by smaller clunks when I went over bumps.
>
> When I stopped, I figured out that I had broken one of the clips that hold
> in the sway bar disconnects. Since I wasn't doing anything extreme, I had
> not disconeected them.
>
> Do I need to always disconnect them or was this unusual? Kind of a pain to
> pull them everytime I go offroad. I thought that you only needed to
> disconnect them for extreme articulation.
>
> TIA,
>
> Bruce
>
>
Thread
Thread Starter
Forum
Replies
Last Post
ULB
Jeep Mailing List
6
03-06-2007 06:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
