|
Stumper: AX5 or not?
OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
under the impression that the 4cyl came with the ax5, for which the bleeder valve is located on the passenger side. However, the bleeder valve on my transmission exits on the driver side, which I believe is an identifying feature of the ax15. I've wondered about this ever since I bought the thing and started reading over the Haynes manual. I was reading the pirate4x4 forum tonight and thought about it again, so I ran down and took a picture of the valve: http://s143.photobucket.com/albums/r...t=IMG_0293.jpg The odd thing is that I bought this from I thought the original owner, who definitely didn't seem like the type to do crazy swaps (the pristine condition was the selling point). to summarize: '93 YJ 2.5L engine bleeder valve on the driver side. Any ideas? Any identifying marks or tags I should take a look at in the morning? |
Re: Stumper: AX5 or not?
I thought the bleeder was on the driver side on the AX5?
Carl "The Merg" <greg.mergner@gmail.com> wrote in message news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com... > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > under the impression that the 4cyl came with the ax5, for which the > bleeder valve is located on the passenger side. > However, the bleeder valve on my transmission exits on the driver side, > which I believe is an identifying feature of the ax15. > I've wondered about this ever since I bought the thing and started > reading over the Haynes manual. I was reading the pirate4x4 forum > tonight and thought about it again, so I ran down and took a picture of > the valve: > > http://s143.photobucket.com/albums/r...t=IMG_0293.jpg > > The odd thing is that I bought this from I thought the original owner, > who definitely didn't seem like the type to do crazy swaps (the > pristine condition was the selling point). > > to summarize: > '93 YJ > 2.5L engine > bleeder valve on the driver side. > > Any ideas? > Any identifying marks or tags I should take a look at in the morning? > |
Re: Stumper: AX5 or not?
I thought the bleeder was on the driver side on the AX5?
Carl "The Merg" <greg.mergner@gmail.com> wrote in message news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com... > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > under the impression that the 4cyl came with the ax5, for which the > bleeder valve is located on the passenger side. > However, the bleeder valve on my transmission exits on the driver side, > which I believe is an identifying feature of the ax15. > I've wondered about this ever since I bought the thing and started > reading over the Haynes manual. I was reading the pirate4x4 forum > tonight and thought about it again, so I ran down and took a picture of > the valve: > > http://s143.photobucket.com/albums/r...t=IMG_0293.jpg > > The odd thing is that I bought this from I thought the original owner, > who definitely didn't seem like the type to do crazy swaps (the > pristine condition was the selling point). > > to summarize: > '93 YJ > 2.5L engine > bleeder valve on the driver side. > > Any ideas? > Any identifying marks or tags I should take a look at in the morning? > |
Re: Stumper: AX5 or not?
I thought the bleeder was on the driver side on the AX5?
Carl "The Merg" <greg.mergner@gmail.com> wrote in message news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com... > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > under the impression that the 4cyl came with the ax5, for which the > bleeder valve is located on the passenger side. > However, the bleeder valve on my transmission exits on the driver side, > which I believe is an identifying feature of the ax15. > I've wondered about this ever since I bought the thing and started > reading over the Haynes manual. I was reading the pirate4x4 forum > tonight and thought about it again, so I ran down and took a picture of > the valve: > > http://s143.photobucket.com/albums/r...t=IMG_0293.jpg > > The odd thing is that I bought this from I thought the original owner, > who definitely didn't seem like the type to do crazy swaps (the > pristine condition was the selling point). > > to summarize: > '93 YJ > 2.5L engine > bleeder valve on the driver side. > > Any ideas? > Any identifying marks or tags I should take a look at in the morning? > |
Re: Stumper: AX5 or not?
I thought the bleeder was on the driver side on the AX5?
Carl "The Merg" <greg.mergner@gmail.com> wrote in message news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com... > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > under the impression that the 4cyl came with the ax5, for which the > bleeder valve is located on the passenger side. > However, the bleeder valve on my transmission exits on the driver side, > which I believe is an identifying feature of the ax15. > I've wondered about this ever since I bought the thing and started > reading over the Haynes manual. I was reading the pirate4x4 forum > tonight and thought about it again, so I ran down and took a picture of > the valve: > > http://s143.photobucket.com/albums/r...t=IMG_0293.jpg > > The odd thing is that I bought this from I thought the original owner, > who definitely didn't seem like the type to do crazy swaps (the > pristine condition was the selling point). > > to summarize: > '93 YJ > 2.5L engine > bleeder valve on the driver side. > > Any ideas? > Any identifying marks or tags I should take a look at in the morning? > |
Re: Stumper: AX5 or not?
'The internal slaves are identical in every dimension but the ax15
version has the bleeder exiting beside the feed line. Where the ax5 exits on the pass side.' From: http://www.pirate4x4.com/forum/showt...ghlight=thread On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > I thought the bleeder was on the driver side on the AX5? > > Carl > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > under the impression that the 4cyl came with the ax5, for which the > > bleeder valve is located on the passenger side. > > However, the bleeder valve on my transmission exits on the driver side, > > which I believe is an identifying feature of the ax15. > > I've wondered about this ever since I bought the thing and started > > reading over the Haynes manual. I was reading the pirate4x4 forum > > tonight and thought about it again, so I ran down and took a picture of > > the valve: > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > The odd thing is that I bought this from I thought the original owner, > > who definitely didn't seem like the type to do crazy swaps (the > > pristine condition was the selling point). > > > to summarize: > > '93 YJ > > 2.5L engine > > bleeder valve on the driver side. > > > Any ideas? > > Any identifying marks or tags I should take a look at in the morning? |
Re: Stumper: AX5 or not?
'The internal slaves are identical in every dimension but the ax15
version has the bleeder exiting beside the feed line. Where the ax5 exits on the pass side.' From: http://www.pirate4x4.com/forum/showt...ghlight=thread On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > I thought the bleeder was on the driver side on the AX5? > > Carl > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > under the impression that the 4cyl came with the ax5, for which the > > bleeder valve is located on the passenger side. > > However, the bleeder valve on my transmission exits on the driver side, > > which I believe is an identifying feature of the ax15. > > I've wondered about this ever since I bought the thing and started > > reading over the Haynes manual. I was reading the pirate4x4 forum > > tonight and thought about it again, so I ran down and took a picture of > > the valve: > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > The odd thing is that I bought this from I thought the original owner, > > who definitely didn't seem like the type to do crazy swaps (the > > pristine condition was the selling point). > > > to summarize: > > '93 YJ > > 2.5L engine > > bleeder valve on the driver side. > > > Any ideas? > > Any identifying marks or tags I should take a look at in the morning? |
Re: Stumper: AX5 or not?
'The internal slaves are identical in every dimension but the ax15
version has the bleeder exiting beside the feed line. Where the ax5 exits on the pass side.' From: http://www.pirate4x4.com/forum/showt...ghlight=thread On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > I thought the bleeder was on the driver side on the AX5? > > Carl > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > under the impression that the 4cyl came with the ax5, for which the > > bleeder valve is located on the passenger side. > > However, the bleeder valve on my transmission exits on the driver side, > > which I believe is an identifying feature of the ax15. > > I've wondered about this ever since I bought the thing and started > > reading over the Haynes manual. I was reading the pirate4x4 forum > > tonight and thought about it again, so I ran down and took a picture of > > the valve: > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > The odd thing is that I bought this from I thought the original owner, > > who definitely didn't seem like the type to do crazy swaps (the > > pristine condition was the selling point). > > > to summarize: > > '93 YJ > > 2.5L engine > > bleeder valve on the driver side. > > > Any ideas? > > Any identifying marks or tags I should take a look at in the morning? |
Re: Stumper: AX5 or not?
'The internal slaves are identical in every dimension but the ax15
version has the bleeder exiting beside the feed line. Where the ax5 exits on the pass side.' From: http://www.pirate4x4.com/forum/showt...ghlight=thread On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > I thought the bleeder was on the driver side on the AX5? > > Carl > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > under the impression that the 4cyl came with the ax5, for which the > > bleeder valve is located on the passenger side. > > However, the bleeder valve on my transmission exits on the driver side, > > which I believe is an identifying feature of the ax15. > > I've wondered about this ever since I bought the thing and started > > reading over the Haynes manual. I was reading the pirate4x4 forum > > tonight and thought about it again, so I ran down and took a picture of > > the valve: > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > The odd thing is that I bought this from I thought the original owner, > > who definitely didn't seem like the type to do crazy swaps (the > > pristine condition was the selling point). > > > to summarize: > > '93 YJ > > 2.5L engine > > bleeder valve on the driver side. > > > Any ideas? > > Any identifying marks or tags I should take a look at in the morning? |
Re: Stumper: AX5 or not?
Hm. My AX5 had the internal slave. Can you get a picture of the
transmission? Carl "The Merg" <greg.mergner@gmail.com> wrote in message news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > 'The internal slaves are identical in every dimension but the ax15 > version has the bleeder exiting beside the feed line. Where the ax5 > exits on the pass side.' > > From: > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: >> I thought the bleeder was on the driver side on the AX5? >> >> Carl >> >> "The Merg" <greg.merg...@gmail.com> wrote in >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... >> >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been >> > under the impression that the 4cyl came with the ax5, for which the >> > bleeder valve is located on the passenger side. >> > However, the bleeder valve on my transmission exits on the driver side, >> > which I believe is an identifying feature of the ax15. >> > I've wondered about this ever since I bought the thing and started >> > reading over the Haynes manual. I was reading the pirate4x4 forum >> > tonight and thought about it again, so I ran down and took a picture of >> > the valve: >> >> >http://s143.photobucket.com/albums/r...er/?action=vie... >> >> > The odd thing is that I bought this from I thought the original owner, >> > who definitely didn't seem like the type to do crazy swaps (the >> > pristine condition was the selling point). >> >> > to summarize: >> > '93 YJ >> > 2.5L engine >> > bleeder valve on the driver side. >> >> > Any ideas? >> > Any identifying marks or tags I should take a look at in the morning? > |
Re: Stumper: AX5 or not?
Hm. My AX5 had the internal slave. Can you get a picture of the
transmission? Carl "The Merg" <greg.mergner@gmail.com> wrote in message news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > 'The internal slaves are identical in every dimension but the ax15 > version has the bleeder exiting beside the feed line. Where the ax5 > exits on the pass side.' > > From: > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: >> I thought the bleeder was on the driver side on the AX5? >> >> Carl >> >> "The Merg" <greg.merg...@gmail.com> wrote in >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... >> >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been >> > under the impression that the 4cyl came with the ax5, for which the >> > bleeder valve is located on the passenger side. >> > However, the bleeder valve on my transmission exits on the driver side, >> > which I believe is an identifying feature of the ax15. >> > I've wondered about this ever since I bought the thing and started >> > reading over the Haynes manual. I was reading the pirate4x4 forum >> > tonight and thought about it again, so I ran down and took a picture of >> > the valve: >> >> >http://s143.photobucket.com/albums/r...er/?action=vie... >> >> > The odd thing is that I bought this from I thought the original owner, >> > who definitely didn't seem like the type to do crazy swaps (the >> > pristine condition was the selling point). >> >> > to summarize: >> > '93 YJ >> > 2.5L engine >> > bleeder valve on the driver side. >> >> > Any ideas? >> > Any identifying marks or tags I should take a look at in the morning? > |
Re: Stumper: AX5 or not?
Hm. My AX5 had the internal slave. Can you get a picture of the
transmission? Carl "The Merg" <greg.mergner@gmail.com> wrote in message news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > 'The internal slaves are identical in every dimension but the ax15 > version has the bleeder exiting beside the feed line. Where the ax5 > exits on the pass side.' > > From: > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: >> I thought the bleeder was on the driver side on the AX5? >> >> Carl >> >> "The Merg" <greg.merg...@gmail.com> wrote in >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... >> >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been >> > under the impression that the 4cyl came with the ax5, for which the >> > bleeder valve is located on the passenger side. >> > However, the bleeder valve on my transmission exits on the driver side, >> > which I believe is an identifying feature of the ax15. >> > I've wondered about this ever since I bought the thing and started >> > reading over the Haynes manual. I was reading the pirate4x4 forum >> > tonight and thought about it again, so I ran down and took a picture of >> > the valve: >> >> >http://s143.photobucket.com/albums/r...er/?action=vie... >> >> > The odd thing is that I bought this from I thought the original owner, >> > who definitely didn't seem like the type to do crazy swaps (the >> > pristine condition was the selling point). >> >> > to summarize: >> > '93 YJ >> > 2.5L engine >> > bleeder valve on the driver side. >> >> > Any ideas? >> > Any identifying marks or tags I should take a look at in the morning? > |
Re: Stumper: AX5 or not?
Hm. My AX5 had the internal slave. Can you get a picture of the
transmission? Carl "The Merg" <greg.mergner@gmail.com> wrote in message news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > 'The internal slaves are identical in every dimension but the ax15 > version has the bleeder exiting beside the feed line. Where the ax5 > exits on the pass side.' > > From: > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: >> I thought the bleeder was on the driver side on the AX5? >> >> Carl >> >> "The Merg" <greg.merg...@gmail.com> wrote in >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... >> >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been >> > under the impression that the 4cyl came with the ax5, for which the >> > bleeder valve is located on the passenger side. >> > However, the bleeder valve on my transmission exits on the driver side, >> > which I believe is an identifying feature of the ax15. >> > I've wondered about this ever since I bought the thing and started >> > reading over the Haynes manual. I was reading the pirate4x4 forum >> > tonight and thought about it again, so I ran down and took a picture of >> > the valve: >> >> >http://s143.photobucket.com/albums/r...er/?action=vie... >> >> > The odd thing is that I bought this from I thought the original owner, >> > who definitely didn't seem like the type to do crazy swaps (the >> > pristine condition was the selling point). >> >> > to summarize: >> > '93 YJ >> > 2.5L engine >> > bleeder valve on the driver side. >> >> > Any ideas? >> > Any identifying marks or tags I should take a look at in the morning? > |
Re: Stumper: AX5 or not?
Carl,
So your's exited on the driver side as well? AFAIK everything I've read has always said that the ax5 exits on the passenger side. I actually remember being really confused when I first had to bleed the clutch because the book (haynes) said 'passenger side'. But this could be a simple problem of different model years? I put in the motor and have replaced the clutch once since then - I kind of recall having to rotate the bleeder valve to make it fit - but that could be my memory making things up; it does that sometimes. I'll take more complete pictures in the morning. Carl wrote: > Hm. My AX5 had the internal slave. Can you get a picture of the > transmission? > > Carl > > > "The Merg" <greg.mergner@gmail.com> wrote in message > news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > > 'The internal slaves are identical in every dimension but the ax15 > > version has the bleeder exiting beside the feed line. Where the ax5 > > exits on the pass side.' > > > > From: > > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > >> I thought the bleeder was on the driver side on the AX5? > >> > >> Carl > >> > >> "The Merg" <greg.merg...@gmail.com> wrote in > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > >> > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > >> > under the impression that the 4cyl came with the ax5, for which the > >> > bleeder valve is located on the passenger side. > >> > However, the bleeder valve on my transmission exits on the driver side, > >> > which I believe is an identifying feature of the ax15. > >> > I've wondered about this ever since I bought the thing and started > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > >> > tonight and thought about it again, so I ran down and took a picture of > >> > the valve: > >> > >> >http://s143.photobucket.com/albums/r...er/?action=vie... > >> > >> > The odd thing is that I bought this from I thought the original owner, > >> > who definitely didn't seem like the type to do crazy swaps (the > >> > pristine condition was the selling point). > >> > >> > to summarize: > >> > '93 YJ > >> > 2.5L engine > >> > bleeder valve on the driver side. > >> > >> > Any ideas? > >> > Any identifying marks or tags I should take a look at in the morning? > > |
Re: Stumper: AX5 or not?
Carl,
So your's exited on the driver side as well? AFAIK everything I've read has always said that the ax5 exits on the passenger side. I actually remember being really confused when I first had to bleed the clutch because the book (haynes) said 'passenger side'. But this could be a simple problem of different model years? I put in the motor and have replaced the clutch once since then - I kind of recall having to rotate the bleeder valve to make it fit - but that could be my memory making things up; it does that sometimes. I'll take more complete pictures in the morning. Carl wrote: > Hm. My AX5 had the internal slave. Can you get a picture of the > transmission? > > Carl > > > "The Merg" <greg.mergner@gmail.com> wrote in message > news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > > 'The internal slaves are identical in every dimension but the ax15 > > version has the bleeder exiting beside the feed line. Where the ax5 > > exits on the pass side.' > > > > From: > > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > >> I thought the bleeder was on the driver side on the AX5? > >> > >> Carl > >> > >> "The Merg" <greg.merg...@gmail.com> wrote in > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > >> > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > >> > under the impression that the 4cyl came with the ax5, for which the > >> > bleeder valve is located on the passenger side. > >> > However, the bleeder valve on my transmission exits on the driver side, > >> > which I believe is an identifying feature of the ax15. > >> > I've wondered about this ever since I bought the thing and started > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > >> > tonight and thought about it again, so I ran down and took a picture of > >> > the valve: > >> > >> >http://s143.photobucket.com/albums/r...er/?action=vie... > >> > >> > The odd thing is that I bought this from I thought the original owner, > >> > who definitely didn't seem like the type to do crazy swaps (the > >> > pristine condition was the selling point). > >> > >> > to summarize: > >> > '93 YJ > >> > 2.5L engine > >> > bleeder valve on the driver side. > >> > >> > Any ideas? > >> > Any identifying marks or tags I should take a look at in the morning? > > |
Re: Stumper: AX5 or not?
Carl,
So your's exited on the driver side as well? AFAIK everything I've read has always said that the ax5 exits on the passenger side. I actually remember being really confused when I first had to bleed the clutch because the book (haynes) said 'passenger side'. But this could be a simple problem of different model years? I put in the motor and have replaced the clutch once since then - I kind of recall having to rotate the bleeder valve to make it fit - but that could be my memory making things up; it does that sometimes. I'll take more complete pictures in the morning. Carl wrote: > Hm. My AX5 had the internal slave. Can you get a picture of the > transmission? > > Carl > > > "The Merg" <greg.mergner@gmail.com> wrote in message > news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > > 'The internal slaves are identical in every dimension but the ax15 > > version has the bleeder exiting beside the feed line. Where the ax5 > > exits on the pass side.' > > > > From: > > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > >> I thought the bleeder was on the driver side on the AX5? > >> > >> Carl > >> > >> "The Merg" <greg.merg...@gmail.com> wrote in > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > >> > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > >> > under the impression that the 4cyl came with the ax5, for which the > >> > bleeder valve is located on the passenger side. > >> > However, the bleeder valve on my transmission exits on the driver side, > >> > which I believe is an identifying feature of the ax15. > >> > I've wondered about this ever since I bought the thing and started > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > >> > tonight and thought about it again, so I ran down and took a picture of > >> > the valve: > >> > >> >http://s143.photobucket.com/albums/r...er/?action=vie... > >> > >> > The odd thing is that I bought this from I thought the original owner, > >> > who definitely didn't seem like the type to do crazy swaps (the > >> > pristine condition was the selling point). > >> > >> > to summarize: > >> > '93 YJ > >> > 2.5L engine > >> > bleeder valve on the driver side. > >> > >> > Any ideas? > >> > Any identifying marks or tags I should take a look at in the morning? > > |
Re: Stumper: AX5 or not?
Carl,
So your's exited on the driver side as well? AFAIK everything I've read has always said that the ax5 exits on the passenger side. I actually remember being really confused when I first had to bleed the clutch because the book (haynes) said 'passenger side'. But this could be a simple problem of different model years? I put in the motor and have replaced the clutch once since then - I kind of recall having to rotate the bleeder valve to make it fit - but that could be my memory making things up; it does that sometimes. I'll take more complete pictures in the morning. Carl wrote: > Hm. My AX5 had the internal slave. Can you get a picture of the > transmission? > > Carl > > > "The Merg" <greg.mergner@gmail.com> wrote in message > news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > > 'The internal slaves are identical in every dimension but the ax15 > > version has the bleeder exiting beside the feed line. Where the ax5 > > exits on the pass side.' > > > > From: > > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > >> I thought the bleeder was on the driver side on the AX5? > >> > >> Carl > >> > >> "The Merg" <greg.merg...@gmail.com> wrote in > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > >> > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > >> > under the impression that the 4cyl came with the ax5, for which the > >> > bleeder valve is located on the passenger side. > >> > However, the bleeder valve on my transmission exits on the driver side, > >> > which I believe is an identifying feature of the ax15. > >> > I've wondered about this ever since I bought the thing and started > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > >> > tonight and thought about it again, so I ran down and took a picture of > >> > the valve: > >> > >> >http://s143.photobucket.com/albums/r...er/?action=vie... > >> > >> > The odd thing is that I bought this from I thought the original owner, > >> > who definitely didn't seem like the type to do crazy swaps (the > >> > pristine condition was the selling point). > >> > >> > to summarize: > >> > '93 YJ > >> > 2.5L engine > >> > bleeder valve on the driver side. > >> > >> > Any ideas? > >> > Any identifying marks or tags I should take a look at in the morning? > > |
Re: Stumper: AX5 or not?
> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down. huh...possibly. would everything still bolt in correctly? On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote: > You replaced the clutch and didn't get an external slave setup for it? I am > thinking you put the bell housing in upside down. > > Earle > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com... > > > Carl, > > So your's exited on the driver side as well? > > AFAIK everything I've read has always said that the ax5 exits on the > > passenger side. I actually remember being really confused when I first > > had to bleed the clutch because the book (haynes) said 'passenger > > side'. But this could be a simple problem of different model years? > > I put in the motor and have replaced the clutch once since then - I > > kind of recall having to rotate the bleeder valve to make it fit - but > > that could be my memory making things up; it does that sometimes. > > > I'll take more complete pictures in the morning. > > > Carl wrote: > > > Hm. My AX5 had the internal slave. Can you get a picture of the > > > transmission? > > > > Carl > > > > "The Merg" <greg.merg...@gmail.com> wrote in message > > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com... > > > > 'The internal slaves are identical in every dimension but the ax15 > > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > > exits on the pass side.' > > > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > > >> I thought the bleeder was on the driver side on the AX5? > > > > >> Carl > > > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > > >> > under the impression that the 4cyl came with the ax5, for which the > > > >> > bleeder valve is located on the passenger side. > > > >> > However, the bleeder valve on my transmission exits on the driver > side, > > > >> > which I believe is an identifying feature of the ax15. > > > >> > I've wondered about this ever since I bought the thing and started > > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > > >> > tonight and thought about it again, so I ran down and took a > picture of > > > >> > the valve: > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > > >> > The odd thing is that I bought this from I thought the original > owner, > > > >> > who definitely didn't seem like the type to do crazy swaps (the > > > >> > pristine condition was the selling point). > > > > >> > to summarize: > > > >> > '93 YJ > > > >> > 2.5L engine > > > >> > bleeder valve on the driver side. > > > > >> > Any ideas? > > > >> > Any identifying marks or tags I should take a look at in the > morning? |
Re: Stumper: AX5 or not?
> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down. huh...possibly. would everything still bolt in correctly? On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote: > You replaced the clutch and didn't get an external slave setup for it? I am > thinking you put the bell housing in upside down. > > Earle > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com... > > > Carl, > > So your's exited on the driver side as well? > > AFAIK everything I've read has always said that the ax5 exits on the > > passenger side. I actually remember being really confused when I first > > had to bleed the clutch because the book (haynes) said 'passenger > > side'. But this could be a simple problem of different model years? > > I put in the motor and have replaced the clutch once since then - I > > kind of recall having to rotate the bleeder valve to make it fit - but > > that could be my memory making things up; it does that sometimes. > > > I'll take more complete pictures in the morning. > > > Carl wrote: > > > Hm. My AX5 had the internal slave. Can you get a picture of the > > > transmission? > > > > Carl > > > > "The Merg" <greg.merg...@gmail.com> wrote in message > > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com... > > > > 'The internal slaves are identical in every dimension but the ax15 > > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > > exits on the pass side.' > > > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > > >> I thought the bleeder was on the driver side on the AX5? > > > > >> Carl > > > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > > >> > under the impression that the 4cyl came with the ax5, for which the > > > >> > bleeder valve is located on the passenger side. > > > >> > However, the bleeder valve on my transmission exits on the driver > side, > > > >> > which I believe is an identifying feature of the ax15. > > > >> > I've wondered about this ever since I bought the thing and started > > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > > >> > tonight and thought about it again, so I ran down and took a > picture of > > > >> > the valve: > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > > >> > The odd thing is that I bought this from I thought the original > owner, > > > >> > who definitely didn't seem like the type to do crazy swaps (the > > > >> > pristine condition was the selling point). > > > > >> > to summarize: > > > >> > '93 YJ > > > >> > 2.5L engine > > > >> > bleeder valve on the driver side. > > > > >> > Any ideas? > > > >> > Any identifying marks or tags I should take a look at in the > morning? |
Re: Stumper: AX5 or not?
> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down. huh...possibly. would everything still bolt in correctly? On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote: > You replaced the clutch and didn't get an external slave setup for it? I am > thinking you put the bell housing in upside down. > > Earle > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com... > > > Carl, > > So your's exited on the driver side as well? > > AFAIK everything I've read has always said that the ax5 exits on the > > passenger side. I actually remember being really confused when I first > > had to bleed the clutch because the book (haynes) said 'passenger > > side'. But this could be a simple problem of different model years? > > I put in the motor and have replaced the clutch once since then - I > > kind of recall having to rotate the bleeder valve to make it fit - but > > that could be my memory making things up; it does that sometimes. > > > I'll take more complete pictures in the morning. > > > Carl wrote: > > > Hm. My AX5 had the internal slave. Can you get a picture of the > > > transmission? > > > > Carl > > > > "The Merg" <greg.merg...@gmail.com> wrote in message > > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com... > > > > 'The internal slaves are identical in every dimension but the ax15 > > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > > exits on the pass side.' > > > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > > >> I thought the bleeder was on the driver side on the AX5? > > > > >> Carl > > > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > > >> > under the impression that the 4cyl came with the ax5, for which the > > > >> > bleeder valve is located on the passenger side. > > > >> > However, the bleeder valve on my transmission exits on the driver > side, > > > >> > which I believe is an identifying feature of the ax15. > > > >> > I've wondered about this ever since I bought the thing and started > > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > > >> > tonight and thought about it again, so I ran down and took a > picture of > > > >> > the valve: > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > > >> > The odd thing is that I bought this from I thought the original > owner, > > > >> > who definitely didn't seem like the type to do crazy swaps (the > > > >> > pristine condition was the selling point). > > > > >> > to summarize: > > > >> > '93 YJ > > > >> > 2.5L engine > > > >> > bleeder valve on the driver side. > > > > >> > Any ideas? > > > >> > Any identifying marks or tags I should take a look at in the > morning? |
Re: Stumper: AX5 or not?
> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down. huh...possibly. would everything still bolt in correctly? On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote: > You replaced the clutch and didn't get an external slave setup for it? I am > thinking you put the bell housing in upside down. > > Earle > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com... > > > Carl, > > So your's exited on the driver side as well? > > AFAIK everything I've read has always said that the ax5 exits on the > > passenger side. I actually remember being really confused when I first > > had to bleed the clutch because the book (haynes) said 'passenger > > side'. But this could be a simple problem of different model years? > > I put in the motor and have replaced the clutch once since then - I > > kind of recall having to rotate the bleeder valve to make it fit - but > > that could be my memory making things up; it does that sometimes. > > > I'll take more complete pictures in the morning. > > > Carl wrote: > > > Hm. My AX5 had the internal slave. Can you get a picture of the > > > transmission? > > > > Carl > > > > "The Merg" <greg.merg...@gmail.com> wrote in message > > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com... > > > > 'The internal slaves are identical in every dimension but the ax15 > > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > > exits on the pass side.' > > > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > > >> I thought the bleeder was on the driver side on the AX5? > > > > >> Carl > > > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > > >> > under the impression that the 4cyl came with the ax5, for which the > > > >> > bleeder valve is located on the passenger side. > > > >> > However, the bleeder valve on my transmission exits on the driver > side, > > > >> > which I believe is an identifying feature of the ax15. > > > >> > I've wondered about this ever since I bought the thing and started > > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > > >> > tonight and thought about it again, so I ran down and took a > picture of > > > >> > the valve: > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > > >> > The odd thing is that I bought this from I thought the original > owner, > > > >> > who definitely didn't seem like the type to do crazy swaps (the > > > >> > pristine condition was the selling point). > > > > >> > to summarize: > > > >> > '93 YJ > > > >> > 2.5L engine > > > >> > bleeder valve on the driver side. > > > > >> > Any ideas? > > > >> > Any identifying marks or tags I should take a look at in the > morning? |
Re: Stumper: AX5 or not?
You replaced the clutch and didn't get an external slave setup for it? I am
thinking you put the bell housing in upside down. Earle "The Merg" <greg.mergner@gmail.com> wrote in message news:1168928320.624733.99430@q2g2000cwa.googlegrou ps.com... > Carl, > So your's exited on the driver side as well? > AFAIK everything I've read has always said that the ax5 exits on the > passenger side. I actually remember being really confused when I first > had to bleed the clutch because the book (haynes) said 'passenger > side'. But this could be a simple problem of different model years? > I put in the motor and have replaced the clutch once since then - I > kind of recall having to rotate the bleeder valve to make it fit - but > that could be my memory making things up; it does that sometimes. > > I'll take more complete pictures in the morning. > > Carl wrote: > > Hm. My AX5 had the internal slave. Can you get a picture of the > > transmission? > > > > Carl > > > > > > "The Merg" <greg.mergner@gmail.com> wrote in message > > news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > > > 'The internal slaves are identical in every dimension but the ax15 > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > exits on the pass side.' > > > > > > From: > > > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > >> I thought the bleeder was on the driver side on the AX5? > > >> > > >> Carl > > >> > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > >> > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > >> > under the impression that the 4cyl came with the ax5, for which the > > >> > bleeder valve is located on the passenger side. > > >> > However, the bleeder valve on my transmission exits on the driver side, > > >> > which I believe is an identifying feature of the ax15. > > >> > I've wondered about this ever since I bought the thing and started > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > >> > tonight and thought about it again, so I ran down and took a picture of > > >> > the valve: > > >> > > >> >http://s143.photobucket.com/albums/r...er/?action=vie... > > >> > > >> > The odd thing is that I bought this from I thought the original owner, > > >> > who definitely didn't seem like the type to do crazy swaps (the > > >> > pristine condition was the selling point). > > >> > > >> > to summarize: > > >> > '93 YJ > > >> > 2.5L engine > > >> > bleeder valve on the driver side. > > >> > > >> > Any ideas? > > >> > Any identifying marks or tags I should take a look at in the morning? > > > > |
Re: Stumper: AX5 or not?
You replaced the clutch and didn't get an external slave setup for it? I am
thinking you put the bell housing in upside down. Earle "The Merg" <greg.mergner@gmail.com> wrote in message news:1168928320.624733.99430@q2g2000cwa.googlegrou ps.com... > Carl, > So your's exited on the driver side as well? > AFAIK everything I've read has always said that the ax5 exits on the > passenger side. I actually remember being really confused when I first > had to bleed the clutch because the book (haynes) said 'passenger > side'. But this could be a simple problem of different model years? > I put in the motor and have replaced the clutch once since then - I > kind of recall having to rotate the bleeder valve to make it fit - but > that could be my memory making things up; it does that sometimes. > > I'll take more complete pictures in the morning. > > Carl wrote: > > Hm. My AX5 had the internal slave. Can you get a picture of the > > transmission? > > > > Carl > > > > > > "The Merg" <greg.mergner@gmail.com> wrote in message > > news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > > > 'The internal slaves are identical in every dimension but the ax15 > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > exits on the pass side.' > > > > > > From: > > > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > >> I thought the bleeder was on the driver side on the AX5? > > >> > > >> Carl > > >> > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > >> > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > >> > under the impression that the 4cyl came with the ax5, for which the > > >> > bleeder valve is located on the passenger side. > > >> > However, the bleeder valve on my transmission exits on the driver side, > > >> > which I believe is an identifying feature of the ax15. > > >> > I've wondered about this ever since I bought the thing and started > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > >> > tonight and thought about it again, so I ran down and took a picture of > > >> > the valve: > > >> > > >> >http://s143.photobucket.com/albums/r...er/?action=vie... > > >> > > >> > The odd thing is that I bought this from I thought the original owner, > > >> > who definitely didn't seem like the type to do crazy swaps (the > > >> > pristine condition was the selling point). > > >> > > >> > to summarize: > > >> > '93 YJ > > >> > 2.5L engine > > >> > bleeder valve on the driver side. > > >> > > >> > Any ideas? > > >> > Any identifying marks or tags I should take a look at in the morning? > > > > |
Re: Stumper: AX5 or not?
You replaced the clutch and didn't get an external slave setup for it? I am
thinking you put the bell housing in upside down. Earle "The Merg" <greg.mergner@gmail.com> wrote in message news:1168928320.624733.99430@q2g2000cwa.googlegrou ps.com... > Carl, > So your's exited on the driver side as well? > AFAIK everything I've read has always said that the ax5 exits on the > passenger side. I actually remember being really confused when I first > had to bleed the clutch because the book (haynes) said 'passenger > side'. But this could be a simple problem of different model years? > I put in the motor and have replaced the clutch once since then - I > kind of recall having to rotate the bleeder valve to make it fit - but > that could be my memory making things up; it does that sometimes. > > I'll take more complete pictures in the morning. > > Carl wrote: > > Hm. My AX5 had the internal slave. Can you get a picture of the > > transmission? > > > > Carl > > > > > > "The Merg" <greg.mergner@gmail.com> wrote in message > > news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > > > 'The internal slaves are identical in every dimension but the ax15 > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > exits on the pass side.' > > > > > > From: > > > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > >> I thought the bleeder was on the driver side on the AX5? > > >> > > >> Carl > > >> > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > >> > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > >> > under the impression that the 4cyl came with the ax5, for which the > > >> > bleeder valve is located on the passenger side. > > >> > However, the bleeder valve on my transmission exits on the driver side, > > >> > which I believe is an identifying feature of the ax15. > > >> > I've wondered about this ever since I bought the thing and started > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > >> > tonight and thought about it again, so I ran down and took a picture of > > >> > the valve: > > >> > > >> >http://s143.photobucket.com/albums/r...er/?action=vie... > > >> > > >> > The odd thing is that I bought this from I thought the original owner, > > >> > who definitely didn't seem like the type to do crazy swaps (the > > >> > pristine condition was the selling point). > > >> > > >> > to summarize: > > >> > '93 YJ > > >> > 2.5L engine > > >> > bleeder valve on the driver side. > > >> > > >> > Any ideas? > > >> > Any identifying marks or tags I should take a look at in the morning? > > > > |
Re: Stumper: AX5 or not?
You replaced the clutch and didn't get an external slave setup for it? I am
thinking you put the bell housing in upside down. Earle "The Merg" <greg.mergner@gmail.com> wrote in message news:1168928320.624733.99430@q2g2000cwa.googlegrou ps.com... > Carl, > So your's exited on the driver side as well? > AFAIK everything I've read has always said that the ax5 exits on the > passenger side. I actually remember being really confused when I first > had to bleed the clutch because the book (haynes) said 'passenger > side'. But this could be a simple problem of different model years? > I put in the motor and have replaced the clutch once since then - I > kind of recall having to rotate the bleeder valve to make it fit - but > that could be my memory making things up; it does that sometimes. > > I'll take more complete pictures in the morning. > > Carl wrote: > > Hm. My AX5 had the internal slave. Can you get a picture of the > > transmission? > > > > Carl > > > > > > "The Merg" <greg.mergner@gmail.com> wrote in message > > news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com... > > > 'The internal slaves are identical in every dimension but the ax15 > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > exits on the pass side.' > > > > > > From: > > > http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > >> I thought the bleeder was on the driver side on the AX5? > > >> > > >> Carl > > >> > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > >> > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > >> > under the impression that the 4cyl came with the ax5, for which the > > >> > bleeder valve is located on the passenger side. > > >> > However, the bleeder valve on my transmission exits on the driver side, > > >> > which I believe is an identifying feature of the ax15. > > >> > I've wondered about this ever since I bought the thing and started > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > >> > tonight and thought about it again, so I ran down and took a picture of > > >> > the valve: > > >> > > >> >http://s143.photobucket.com/albums/r...er/?action=vie... > > >> > > >> > The odd thing is that I bought this from I thought the original owner, > > >> > who definitely didn't seem like the type to do crazy swaps (the > > >> > pristine condition was the selling point). > > >> > > >> > to summarize: > > >> > '93 YJ > > >> > 2.5L engine > > >> > bleeder valve on the driver side. > > >> > > >> > Any ideas? > > >> > Any identifying marks or tags I should take a look at in the morning? > > > > |
Re: Stumper: AX5 or not?
More pics:
http://s143.photobucket.com/albums/r...se%20Wrangler/ Let me know if there is a specific spot on the tranny I should look at or take a picture of. On Jan 16, 1:34 am, "The Merg" <greg.merg...@gmail.com> wrote: > > You replaced the clutch and didn't get an external slave setup for it? I am > > thinking you put the bell housing in upside down.huh...possibly. would everything still bolt in correctly? > > On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote: > > > You replaced the clutch and didn't get an external slave setup for it? I am > > thinking you put the bell housing in upside down. > > > Earle > > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com... > > > > Carl, > > > So your's exited on the driver side as well? > > > AFAIK everything I've read has always said that the ax5 exits on the > > > passenger side. I actually remember being really confused when I first > > > had to bleed the clutch because the book (haynes) said 'passenger > > > side'. But this could be a simple problem of different model years? > > > I put in the motor and have replaced the clutch once since then - I > > > kind of recall having to rotate the bleeder valve to make it fit - but > > > that could be my memory making things up; it does that sometimes. > > > > I'll take more complete pictures in the morning. > > > > Carl wrote: > > > > Hm. My AX5 had the internal slave. Can you get a picture of the > > > > transmission? > > > > > Carl > > > > > "The Merg" <greg.merg...@gmail.com> wrote in message > > > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com... > > > > > 'The internal slaves are identical in every dimension but the ax15 > > > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > > > exits on the pass side.' > > > > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > > > >> I thought the bleeder was on the driver side on the AX5? > > > > > >> Carl > > > > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > > > >> > under the impression that the 4cyl came with the ax5, for which the > > > > >> > bleeder valve is located on the passenger side. > > > > >> > However, the bleeder valve on my transmission exits on the driver > > side, > > > > >> > which I believe is an identifying feature of the ax15. > > > > >> > I've wondered about this ever since I bought the thing and started > > > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > > > >> > tonight and thought about it again, so I ran down and took a > > picture of > > > > >> > the valve: > > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > > > >> > The odd thing is that I bought this from I thought the original > > owner, > > > > >> > who definitely didn't seem like the type to do crazy swaps (the > > > > >> > pristine condition was the selling point). > > > > > >> > to summarize: > > > > >> > '93 YJ > > > > >> > 2.5L engine > > > > >> > bleeder valve on the driver side. > > > > > >> > Any ideas? > > > > >> > Any identifying marks or tags I should take a look at in the > > morning? |
Re: Stumper: AX5 or not?
More pics:
http://s143.photobucket.com/albums/r...se%20Wrangler/ Let me know if there is a specific spot on the tranny I should look at or take a picture of. On Jan 16, 1:34 am, "The Merg" <greg.merg...@gmail.com> wrote: > > You replaced the clutch and didn't get an external slave setup for it? I am > > thinking you put the bell housing in upside down.huh...possibly. would everything still bolt in correctly? > > On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote: > > > You replaced the clutch and didn't get an external slave setup for it? I am > > thinking you put the bell housing in upside down. > > > Earle > > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com... > > > > Carl, > > > So your's exited on the driver side as well? > > > AFAIK everything I've read has always said that the ax5 exits on the > > > passenger side. I actually remember being really confused when I first > > > had to bleed the clutch because the book (haynes) said 'passenger > > > side'. But this could be a simple problem of different model years? > > > I put in the motor and have replaced the clutch once since then - I > > > kind of recall having to rotate the bleeder valve to make it fit - but > > > that could be my memory making things up; it does that sometimes. > > > > I'll take more complete pictures in the morning. > > > > Carl wrote: > > > > Hm. My AX5 had the internal slave. Can you get a picture of the > > > > transmission? > > > > > Carl > > > > > "The Merg" <greg.merg...@gmail.com> wrote in message > > > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com... > > > > > 'The internal slaves are identical in every dimension but the ax15 > > > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > > > exits on the pass side.' > > > > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > > > >> I thought the bleeder was on the driver side on the AX5? > > > > > >> Carl > > > > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > > > >> > under the impression that the 4cyl came with the ax5, for which the > > > > >> > bleeder valve is located on the passenger side. > > > > >> > However, the bleeder valve on my transmission exits on the driver > > side, > > > > >> > which I believe is an identifying feature of the ax15. > > > > >> > I've wondered about this ever since I bought the thing and started > > > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > > > >> > tonight and thought about it again, so I ran down and took a > > picture of > > > > >> > the valve: > > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > > > >> > The odd thing is that I bought this from I thought the original > > owner, > > > > >> > who definitely didn't seem like the type to do crazy swaps (the > > > > >> > pristine condition was the selling point). > > > > > >> > to summarize: > > > > >> > '93 YJ > > > > >> > 2.5L engine > > > > >> > bleeder valve on the driver side. > > > > > >> > Any ideas? > > > > >> > Any identifying marks or tags I should take a look at in the > > morning? |
Re: Stumper: AX5 or not?
More pics:
http://s143.photobucket.com/albums/r...se%20Wrangler/ Let me know if there is a specific spot on the tranny I should look at or take a picture of. On Jan 16, 1:34 am, "The Merg" <greg.merg...@gmail.com> wrote: > > You replaced the clutch and didn't get an external slave setup for it? I am > > thinking you put the bell housing in upside down.huh...possibly. would everything still bolt in correctly? > > On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote: > > > You replaced the clutch and didn't get an external slave setup for it? I am > > thinking you put the bell housing in upside down. > > > Earle > > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com... > > > > Carl, > > > So your's exited on the driver side as well? > > > AFAIK everything I've read has always said that the ax5 exits on the > > > passenger side. I actually remember being really confused when I first > > > had to bleed the clutch because the book (haynes) said 'passenger > > > side'. But this could be a simple problem of different model years? > > > I put in the motor and have replaced the clutch once since then - I > > > kind of recall having to rotate the bleeder valve to make it fit - but > > > that could be my memory making things up; it does that sometimes. > > > > I'll take more complete pictures in the morning. > > > > Carl wrote: > > > > Hm. My AX5 had the internal slave. Can you get a picture of the > > > > transmission? > > > > > Carl > > > > > "The Merg" <greg.merg...@gmail.com> wrote in message > > > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com... > > > > > 'The internal slaves are identical in every dimension but the ax15 > > > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > > > exits on the pass side.' > > > > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > > > >> I thought the bleeder was on the driver side on the AX5? > > > > > >> Carl > > > > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > > > >> > under the impression that the 4cyl came with the ax5, for which the > > > > >> > bleeder valve is located on the passenger side. > > > > >> > However, the bleeder valve on my transmission exits on the driver > > side, > > > > >> > which I believe is an identifying feature of the ax15. > > > > >> > I've wondered about this ever since I bought the thing and started > > > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > > > >> > tonight and thought about it again, so I ran down and took a > > picture of > > > > >> > the valve: > > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > > > >> > The odd thing is that I bought this from I thought the original > > owner, > > > > >> > who definitely didn't seem like the type to do crazy swaps (the > > > > >> > pristine condition was the selling point). > > > > > >> > to summarize: > > > > >> > '93 YJ > > > > >> > 2.5L engine > > > > >> > bleeder valve on the driver side. > > > > > >> > Any ideas? > > > > >> > Any identifying marks or tags I should take a look at in the > > morning? |
Re: Stumper: AX5 or not?
More pics:
http://s143.photobucket.com/albums/r...se%20Wrangler/ Let me know if there is a specific spot on the tranny I should look at or take a picture of. On Jan 16, 1:34 am, "The Merg" <greg.merg...@gmail.com> wrote: > > You replaced the clutch and didn't get an external slave setup for it? I am > > thinking you put the bell housing in upside down.huh...possibly. would everything still bolt in correctly? > > On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote: > > > You replaced the clutch and didn't get an external slave setup for it? I am > > thinking you put the bell housing in upside down. > > > Earle > > > "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com... > > > > Carl, > > > So your's exited on the driver side as well? > > > AFAIK everything I've read has always said that the ax5 exits on the > > > passenger side. I actually remember being really confused when I first > > > had to bleed the clutch because the book (haynes) said 'passenger > > > side'. But this could be a simple problem of different model years? > > > I put in the motor and have replaced the clutch once since then - I > > > kind of recall having to rotate the bleeder valve to make it fit - but > > > that could be my memory making things up; it does that sometimes. > > > > I'll take more complete pictures in the morning. > > > > Carl wrote: > > > > Hm. My AX5 had the internal slave. Can you get a picture of the > > > > transmission? > > > > > Carl > > > > > "The Merg" <greg.merg...@gmail.com> wrote in message > > > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com... > > > > > 'The internal slaves are identical in every dimension but the ax15 > > > > > version has the bleeder exiting beside the feed line. Where the ax5 > > > > > exits on the pass side.' > > > > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread > > > > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote: > > > > >> I thought the bleeder was on the driver side on the AX5? > > > > > >> Carl > > > > > >> "The Merg" <greg.merg...@gmail.com> wrote in > > > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com... > > > > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been > > > > >> > under the impression that the 4cyl came with the ax5, for which the > > > > >> > bleeder valve is located on the passenger side. > > > > >> > However, the bleeder valve on my transmission exits on the driver > > side, > > > > >> > which I believe is an identifying feature of the ax15. > > > > >> > I've wondered about this ever since I bought the thing and started > > > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum > > > > >> > tonight and thought about it again, so I ran down and took a > > picture of > > > > >> > the valve: > > > >http://s143.photobucket.com/albums/r...er/?action=vie... > > > > > >> > The odd thing is that I bought this from I thought the original > > owner, > > > > >> > who definitely didn't seem like the type to do crazy swaps (the > > > > >> > pristine condition was the selling point). > > > > > >> > to summarize: > > > > >> > '93 YJ > > > > >> > 2.5L engine > > > > >> > bleeder valve on the driver side. > > > > > >> > Any ideas? > > > > >> > Any identifying marks or tags I should take a look at in the > > morning? |
| All times are GMT -4. The time now is 06:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands