Studs?
11-20-2006, 09:06 PM
#1
Guest
Posts: n/a
Studs?
No Kate, it's not what you think.
Anyone have a source for (1974 dana 44 front) the studs that hold the
spindle to the knuckle, and the 9/16 studs and cones used to do a high-steer
conversion?
Nobody in my area stocks this stuff. The cones are often referred to as
"factory" on jeep boards, but no one ever says what factory vehicle used
them.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
Anyone have a source for (1974 dana 44 front) the studs that hold the
spindle to the knuckle, and the 9/16 studs and cones used to do a high-steer
conversion?
Nobody in my area stocks this stuff. The cones are often referred to as
"factory" on jeep boards, but no one ever says what factory vehicle used
them.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
11-21-2006, 08:39 AM
#2
Guest
Posts: n/a
Re: Studs?
**PERK**
Studs??
"Stupendous Man" <spam@trap.com> wrote in message
news:4sf58dFvhqosU1@mid.individual.net...
> No Kate, it's not what you think.
Damnit. Now I'm gonna go kick the cat.
You never let me have any fun!
> Anyone have a source for (1974 dana 44 front) the studs that hold the
> spindle to the knuckle, and the 9/16 studs and cones used to do a
> high-steer conversion?
> Nobody in my area stocks this stuff. The cones are often referred to as
> "factory" on jeep boards, but no one ever says what factory vehicle used
> them.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
Studs??
"Stupendous Man" <spam@trap.com> wrote in message
news:4sf58dFvhqosU1@mid.individual.net...
> No Kate, it's not what you think.
Damnit. Now I'm gonna go kick the cat.
You never let me have any fun!
> Anyone have a source for (1974 dana 44 front) the studs that hold the
> spindle to the knuckle, and the 9/16 studs and cones used to do a
> high-steer conversion?
> Nobody in my area stocks this stuff. The cones are often referred to as
> "factory" on jeep boards, but no one ever says what factory vehicle used
> them.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
11-21-2006, 08:39 AM
#3
Guest
Posts: n/a
Re: Studs?
**PERK**
Studs??
"Stupendous Man" <spam@trap.com> wrote in message
news:4sf58dFvhqosU1@mid.individual.net...
> No Kate, it's not what you think.
Damnit. Now I'm gonna go kick the cat.
You never let me have any fun!
> Anyone have a source for (1974 dana 44 front) the studs that hold the
> spindle to the knuckle, and the 9/16 studs and cones used to do a
> high-steer conversion?
> Nobody in my area stocks this stuff. The cones are often referred to as
> "factory" on jeep boards, but no one ever says what factory vehicle used
> them.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
Studs??
"Stupendous Man" <spam@trap.com> wrote in message
news:4sf58dFvhqosU1@mid.individual.net...
> No Kate, it's not what you think.
Damnit. Now I'm gonna go kick the cat.
You never let me have any fun!
> Anyone have a source for (1974 dana 44 front) the studs that hold the
> spindle to the knuckle, and the 9/16 studs and cones used to do a
> high-steer conversion?
> Nobody in my area stocks this stuff. The cones are often referred to as
> "factory" on jeep boards, but no one ever says what factory vehicle used
> them.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
11-21-2006, 08:39 AM
#4
Guest
Posts: n/a
Re: Studs?
**PERK**
Studs??
"Stupendous Man" <spam@trap.com> wrote in message
news:4sf58dFvhqosU1@mid.individual.net...
> No Kate, it's not what you think.
Damnit. Now I'm gonna go kick the cat.
You never let me have any fun!
> Anyone have a source for (1974 dana 44 front) the studs that hold the
> spindle to the knuckle, and the 9/16 studs and cones used to do a
> high-steer conversion?
> Nobody in my area stocks this stuff. The cones are often referred to as
> "factory" on jeep boards, but no one ever says what factory vehicle used
> them.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
Studs??
"Stupendous Man" <spam@trap.com> wrote in message
news:4sf58dFvhqosU1@mid.individual.net...
> No Kate, it's not what you think.
Damnit. Now I'm gonna go kick the cat.
You never let me have any fun!
> Anyone have a source for (1974 dana 44 front) the studs that hold the
> spindle to the knuckle, and the 9/16 studs and cones used to do a
> high-steer conversion?
> Nobody in my area stocks this stuff. The cones are often referred to as
> "factory" on jeep boards, but no one ever says what factory vehicle used
> them.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
11-22-2006, 10:46 PM
#5
Guest
Posts: n/a
Re: Studs?
I found a good source of info, worth bookmarking
http://www.pirate4x4.com/tech/billav...ngresearch.htm
I machined my knuckles for the high steer today, setting up pinion and
caster angles tomorrow if it doesn't rain
And here's a consolation link for Kate
http://www.chippendales.com/
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
http://www.pirate4x4.com/tech/billav...ngresearch.htm
I machined my knuckles for the high steer today, setting up pinion and
caster angles tomorrow if it doesn't rain
And here's a consolation link for Kate
http://www.chippendales.com/
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
11-22-2006, 10:46 PM
#6
Guest
Posts: n/a
Re: Studs?
I found a good source of info, worth bookmarking
http://www.pirate4x4.com/tech/billav...ngresearch.htm
I machined my knuckles for the high steer today, setting up pinion and
caster angles tomorrow if it doesn't rain
And here's a consolation link for Kate
http://www.chippendales.com/
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
http://www.pirate4x4.com/tech/billav...ngresearch.htm
I machined my knuckles for the high steer today, setting up pinion and
caster angles tomorrow if it doesn't rain
And here's a consolation link for Kate
http://www.chippendales.com/
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
11-22-2006, 10:46 PM
#7
Guest
Posts: n/a
Re: Studs?
I found a good source of info, worth bookmarking
http://www.pirate4x4.com/tech/billav...ngresearch.htm
I machined my knuckles for the high steer today, setting up pinion and
caster angles tomorrow if it doesn't rain
And here's a consolation link for Kate
http://www.chippendales.com/
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
http://www.pirate4x4.com/tech/billav...ngresearch.htm
I machined my knuckles for the high steer today, setting up pinion and
caster angles tomorrow if it doesn't rain
And here's a consolation link for Kate
http://www.chippendales.com/
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
11-23-2006, 07:06 PM
#8
Guest
Posts: n/a
Re: Studs?
"Stupendous Man" <spam@trap.com> wrote in message
news:4skjq5Fvu3pkU1@mid.individual.net...
>I found a good source of info, worth bookmarking
> http://www.pirate4x4.com/tech/billav...ngresearch.htm
> I machined my knuckles for the high steer today, setting up pinion and
> caster angles tomorrow if it doesn't rain
>
> And here's a consolation link for Kate
> http://www.chippendales.com/
>
Ehm... EWWWWWWWW!!!
I like REAL men... did you LOOK at the man of the month?
I think I'm gonna urp.
Now THIS is a good looking man...
http://www.scotsindependent.org/2005...%20Connery.jpg
Oh yea...
Kate
11-23-2006, 07:06 PM
#9
Guest
Posts: n/a
Re: Studs?
"Stupendous Man" <spam@trap.com> wrote in message
news:4skjq5Fvu3pkU1@mid.individual.net...
>I found a good source of info, worth bookmarking
> http://www.pirate4x4.com/tech/billav...ngresearch.htm
> I machined my knuckles for the high steer today, setting up pinion and
> caster angles tomorrow if it doesn't rain
>
> And here's a consolation link for Kate
> http://www.chippendales.com/
>
Ehm... EWWWWWWWW!!!
I like REAL men... did you LOOK at the man of the month?
I think I'm gonna urp.
Now THIS is a good looking man...
http://www.scotsindependent.org/2005...%20Connery.jpg
Oh yea...
Kate
11-23-2006, 07:06 PM
#10
Guest
Posts: n/a
Re: Studs?
"Stupendous Man" <spam@trap.com> wrote in message
news:4skjq5Fvu3pkU1@mid.individual.net...
>I found a good source of info, worth bookmarking
> http://www.pirate4x4.com/tech/billav...ngresearch.htm
> I machined my knuckles for the high steer today, setting up pinion and
> caster angles tomorrow if it doesn't rain
>
> And here's a consolation link for Kate
> http://www.chippendales.com/
>
Ehm... EWWWWWWWW!!!
I like REAL men... did you LOOK at the man of the month?
I think I'm gonna urp.
Now THIS is a good looking man...
http://www.scotsindependent.org/2005...%20Connery.jpg
Oh yea...
Kate
