Stuck Rotor
#51
Guest
Posts: n/a
Re: Stuck Rotor
Error:
The HAHTsite Scenario Server reports the following:
The requested application session has timed out
--
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Endo" <me@oh.my> wrote in message
news:8eKdnfvqrP3X3fXcRVn-hg@comcast.com...
> The company I work for makes a nice chisel handle in our safety products
> group: http://tinyurl.com/43un6
>
> Shawn
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:4lU9d.17467$tU4.752@okepread06...
> > RoyJ did pass the time by typing:
> >> I'd argue a bit on your choice of hammers. A dead blow hammer has a
> >> relatively soft face, is designed to move machinery parts without
> >> damage. But these rotors get stuck on so tight that you need a "BFH". A
> >> 16 oz carpenter hammer is a joke. I normally use a 2-1/2 pound "cross
> >> pein" blacksmith hammer. This has a hardened steel face that will
> >> definately do some serious damage to the rotor but is the only thing
> >> that delivers enough instanteneous MOMENTUM to the situation. I also
> >> have a "drilling hammer" that has a 12" long handle, useful for
confined
> >> spaces. And for the really tough jobs, I have a 6 pound sledge that
> >> arrived in the shop with a broken handle, reset it with a 12" long
> >> handle. That baby is a serious contender.
> >
> > Yep. The reason I suggest a dead blow type is they won't shatter cast
> > material like a steel hammer will.
> >
> >> BTW: The usual comments about safety: I was using the 6 pounder to
> >> really bash on a 12" cold chisel. Missed the head, came down on my
> >> thumb. Thankfully I was wearing gloves but it still cost me 5 hours in
> >> the emergancy room to get my 5 stitches and a tetnus shot. (The 5 hours
> >> included 3 hours of waiting while the SERIOUS injuries got taken care
of
> >> first.) Be carefull.
> >
> > Smooshed my fingers several times while slinging shingles. Now I use a
> > bit of cardboard to hold small nails and a hand guard on chisels.
> >
> > --
> > DougW
> >
>
>
The HAHTsite Scenario Server reports the following:
The requested application session has timed out
--
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Endo" <me@oh.my> wrote in message
news:8eKdnfvqrP3X3fXcRVn-hg@comcast.com...
> The company I work for makes a nice chisel handle in our safety products
> group: http://tinyurl.com/43un6
>
> Shawn
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:4lU9d.17467$tU4.752@okepread06...
> > RoyJ did pass the time by typing:
> >> I'd argue a bit on your choice of hammers. A dead blow hammer has a
> >> relatively soft face, is designed to move machinery parts without
> >> damage. But these rotors get stuck on so tight that you need a "BFH". A
> >> 16 oz carpenter hammer is a joke. I normally use a 2-1/2 pound "cross
> >> pein" blacksmith hammer. This has a hardened steel face that will
> >> definately do some serious damage to the rotor but is the only thing
> >> that delivers enough instanteneous MOMENTUM to the situation. I also
> >> have a "drilling hammer" that has a 12" long handle, useful for
confined
> >> spaces. And for the really tough jobs, I have a 6 pound sledge that
> >> arrived in the shop with a broken handle, reset it with a 12" long
> >> handle. That baby is a serious contender.
> >
> > Yep. The reason I suggest a dead blow type is they won't shatter cast
> > material like a steel hammer will.
> >
> >> BTW: The usual comments about safety: I was using the 6 pounder to
> >> really bash on a 12" cold chisel. Missed the head, came down on my
> >> thumb. Thankfully I was wearing gloves but it still cost me 5 hours in
> >> the emergancy room to get my 5 stitches and a tetnus shot. (The 5 hours
> >> included 3 hours of waiting while the SERIOUS injuries got taken care
of
> >> first.) Be carefull.
> >
> > Smooshed my fingers several times while slinging shingles. Now I use a
> > bit of cardboard to hold small nails and a hand guard on chisels.
> >
> > --
> > DougW
> >
>
>
#52
Guest
Posts: n/a
Re: Stuck Rotor
Error:
The HAHTsite Scenario Server reports the following:
The requested application session has timed out
--
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Endo" <me@oh.my> wrote in message
news:8eKdnfvqrP3X3fXcRVn-hg@comcast.com...
> The company I work for makes a nice chisel handle in our safety products
> group: http://tinyurl.com/43un6
>
> Shawn
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:4lU9d.17467$tU4.752@okepread06...
> > RoyJ did pass the time by typing:
> >> I'd argue a bit on your choice of hammers. A dead blow hammer has a
> >> relatively soft face, is designed to move machinery parts without
> >> damage. But these rotors get stuck on so tight that you need a "BFH". A
> >> 16 oz carpenter hammer is a joke. I normally use a 2-1/2 pound "cross
> >> pein" blacksmith hammer. This has a hardened steel face that will
> >> definately do some serious damage to the rotor but is the only thing
> >> that delivers enough instanteneous MOMENTUM to the situation. I also
> >> have a "drilling hammer" that has a 12" long handle, useful for
confined
> >> spaces. And for the really tough jobs, I have a 6 pound sledge that
> >> arrived in the shop with a broken handle, reset it with a 12" long
> >> handle. That baby is a serious contender.
> >
> > Yep. The reason I suggest a dead blow type is they won't shatter cast
> > material like a steel hammer will.
> >
> >> BTW: The usual comments about safety: I was using the 6 pounder to
> >> really bash on a 12" cold chisel. Missed the head, came down on my
> >> thumb. Thankfully I was wearing gloves but it still cost me 5 hours in
> >> the emergancy room to get my 5 stitches and a tetnus shot. (The 5 hours
> >> included 3 hours of waiting while the SERIOUS injuries got taken care
of
> >> first.) Be carefull.
> >
> > Smooshed my fingers several times while slinging shingles. Now I use a
> > bit of cardboard to hold small nails and a hand guard on chisels.
> >
> > --
> > DougW
> >
>
>
The HAHTsite Scenario Server reports the following:
The requested application session has timed out
--
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Endo" <me@oh.my> wrote in message
news:8eKdnfvqrP3X3fXcRVn-hg@comcast.com...
> The company I work for makes a nice chisel handle in our safety products
> group: http://tinyurl.com/43un6
>
> Shawn
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:4lU9d.17467$tU4.752@okepread06...
> > RoyJ did pass the time by typing:
> >> I'd argue a bit on your choice of hammers. A dead blow hammer has a
> >> relatively soft face, is designed to move machinery parts without
> >> damage. But these rotors get stuck on so tight that you need a "BFH". A
> >> 16 oz carpenter hammer is a joke. I normally use a 2-1/2 pound "cross
> >> pein" blacksmith hammer. This has a hardened steel face that will
> >> definately do some serious damage to the rotor but is the only thing
> >> that delivers enough instanteneous MOMENTUM to the situation. I also
> >> have a "drilling hammer" that has a 12" long handle, useful for
confined
> >> spaces. And for the really tough jobs, I have a 6 pound sledge that
> >> arrived in the shop with a broken handle, reset it with a 12" long
> >> handle. That baby is a serious contender.
> >
> > Yep. The reason I suggest a dead blow type is they won't shatter cast
> > material like a steel hammer will.
> >
> >> BTW: The usual comments about safety: I was using the 6 pounder to
> >> really bash on a 12" cold chisel. Missed the head, came down on my
> >> thumb. Thankfully I was wearing gloves but it still cost me 5 hours in
> >> the emergancy room to get my 5 stitches and a tetnus shot. (The 5 hours
> >> included 3 hours of waiting while the SERIOUS injuries got taken care
of
> >> first.) Be carefull.
> >
> > Smooshed my fingers several times while slinging shingles. Now I use a
> > bit of cardboard to hold small nails and a hand guard on chisels.
> >
> > --
> > DougW
> >
>
>
#53
Guest
Posts: n/a
Re: Stuck Rotor
That's another reason not to use Tiny URL.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Error:
>
> The HAHTsite Scenario Server reports the following:
> The requested application session has timed out
>
> --
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Error:
>
> The HAHTsite Scenario Server reports the following:
> The requested application session has timed out
>
> --
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
#54
Guest
Posts: n/a
Re: Stuck Rotor
That's another reason not to use Tiny URL.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Error:
>
> The HAHTsite Scenario Server reports the following:
> The requested application session has timed out
>
> --
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Error:
>
> The HAHTsite Scenario Server reports the following:
> The requested application session has timed out
>
> --
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
#55
Guest
Posts: n/a
Re: Stuck Rotor
That's another reason not to use Tiny URL.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Error:
>
> The HAHTsite Scenario Server reports the following:
> The requested application session has timed out
>
> --
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Error:
>
> The HAHTsite Scenario Server reports the following:
> The requested application session has timed out
>
> --
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
#59
Guest
Posts: n/a
Re: Stuck Rotor
griffin did pass the time by typing:
> OK, where exactly are you guys getting PB Blaster? I've tried CDN Tire,
> Piston Ring, Princess Auto, Walmart and no luck.
http://www.pbblaster.com/
They say it's at Wallyworld.
Not that it helps you, but I get it from AutoZone or PepBoys. Dunno
if they have those north of the border. ;)
There should be several alternatives. Your looking for a penetrating
rust/corrosion buster. Might try a farm store or COOP.
--
DougW
> OK, where exactly are you guys getting PB Blaster? I've tried CDN Tire,
> Piston Ring, Princess Auto, Walmart and no luck.
http://www.pbblaster.com/
They say it's at Wallyworld.
Not that it helps you, but I get it from AutoZone or PepBoys. Dunno
if they have those north of the border. ;)
There should be several alternatives. Your looking for a penetrating
rust/corrosion buster. Might try a farm store or COOP.
--
DougW
#60
Guest
Posts: n/a
Re: Stuck Rotor
griffin did pass the time by typing:
> OK, where exactly are you guys getting PB Blaster? I've tried CDN Tire,
> Piston Ring, Princess Auto, Walmart and no luck.
http://www.pbblaster.com/
They say it's at Wallyworld.
Not that it helps you, but I get it from AutoZone or PepBoys. Dunno
if they have those north of the border. ;)
There should be several alternatives. Your looking for a penetrating
rust/corrosion buster. Might try a farm store or COOP.
--
DougW
> OK, where exactly are you guys getting PB Blaster? I've tried CDN Tire,
> Piston Ring, Princess Auto, Walmart and no luck.
http://www.pbblaster.com/
They say it's at Wallyworld.
Not that it helps you, but I get it from AutoZone or PepBoys. Dunno
if they have those north of the border. ;)
There should be several alternatives. Your looking for a penetrating
rust/corrosion buster. Might try a farm store or COOP.
--
DougW