Stuck in 4wheel
#11
Guest
Posts: n/a
Re: Stuck in 4wheel
ah ya..... bookmarked this time...
Nick
--
http://members.***.net/nnote/
"Steve" <xjlifter@bogus.com> wrote in message
news:2u4q9hF26scplU1@uni-berlin.de...
> Hi Nick,
>
> Same as last time you asked:
>
> http://groups.google.ca/groups?th=2f...d86eeaa&rnum=1
>
> Someday I'll do a better write-up. In the meantime, if something is
> specifically unclear, just ask and I'll elaborate.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Nick wrote:
> > any instructions to go with the homeade posilock?
> > Nick
Nick
--
http://members.***.net/nnote/
"Steve" <xjlifter@bogus.com> wrote in message
news:2u4q9hF26scplU1@uni-berlin.de...
> Hi Nick,
>
> Same as last time you asked:
>
> http://groups.google.ca/groups?th=2f...d86eeaa&rnum=1
>
> Someday I'll do a better write-up. In the meantime, if something is
> specifically unclear, just ask and I'll elaborate.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Nick wrote:
> > any instructions to go with the homeade posilock?
> > Nick
#12
Guest
Posts: n/a
Re: Stuck in 4wheel
ah ya..... bookmarked this time...
Nick
--
http://members.***.net/nnote/
"Steve" <xjlifter@bogus.com> wrote in message
news:2u4q9hF26scplU1@uni-berlin.de...
> Hi Nick,
>
> Same as last time you asked:
>
> http://groups.google.ca/groups?th=2f...d86eeaa&rnum=1
>
> Someday I'll do a better write-up. In the meantime, if something is
> specifically unclear, just ask and I'll elaborate.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Nick wrote:
> > any instructions to go with the homeade posilock?
> > Nick
Nick
--
http://members.***.net/nnote/
"Steve" <xjlifter@bogus.com> wrote in message
news:2u4q9hF26scplU1@uni-berlin.de...
> Hi Nick,
>
> Same as last time you asked:
>
> http://groups.google.ca/groups?th=2f...d86eeaa&rnum=1
>
> Someday I'll do a better write-up. In the meantime, if something is
> specifically unclear, just ask and I'll elaborate.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Nick wrote:
> > any instructions to go with the homeade posilock?
> > Nick
#13
Guest
Posts: n/a
Re: Stuck in 4wheel
ah ya..... bookmarked this time...
Nick
--
http://members.***.net/nnote/
"Steve" <xjlifter@bogus.com> wrote in message
news:2u4q9hF26scplU1@uni-berlin.de...
> Hi Nick,
>
> Same as last time you asked:
>
> http://groups.google.ca/groups?th=2f...d86eeaa&rnum=1
>
> Someday I'll do a better write-up. In the meantime, if something is
> specifically unclear, just ask and I'll elaborate.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Nick wrote:
> > any instructions to go with the homeade posilock?
> > Nick
Nick
--
http://members.***.net/nnote/
"Steve" <xjlifter@bogus.com> wrote in message
news:2u4q9hF26scplU1@uni-berlin.de...
> Hi Nick,
>
> Same as last time you asked:
>
> http://groups.google.ca/groups?th=2f...d86eeaa&rnum=1
>
> Someday I'll do a better write-up. In the meantime, if something is
> specifically unclear, just ask and I'll elaborate.
>
> Steve
> http://xjeep.dyndns.org
>
>
> Nick wrote:
> > any instructions to go with the homeade posilock?
> > Nick
#14
Guest
Posts: n/a
Re: Stuck in 4wheel
Next time, try going backwards for about 10 feet to release the stress on
the front end. Normally, the front axle might not release for a while, and
then it lets go with a thud.
You shouldn't have hurt anything with the front end locked.
"Mike Chambers" <MikeChambers@webtv.net> wrote in message
news:28735-417C6426-146@storefull-3116.bay.webtv.net...
> I have a problem with my 87 Wrangler.
> I was out doing a little wheeling on Saturday when I got back on the
> road and shifted back to 2 high the front axel would not disengage. I
> was 120 miles from home . So I had to drive it home with the T-case in 2
> high . Will this hurt the t-case?
> Normally when the t-case is in 2 high you can turn the front drive
> shaft buy hand. Could use some help.
>
>
> 47 *****'s
> 50 *****'s Truck
> 87 Wrangler
> 97 Wrangler
>
the front end. Normally, the front axle might not release for a while, and
then it lets go with a thud.
You shouldn't have hurt anything with the front end locked.
"Mike Chambers" <MikeChambers@webtv.net> wrote in message
news:28735-417C6426-146@storefull-3116.bay.webtv.net...
> I have a problem with my 87 Wrangler.
> I was out doing a little wheeling on Saturday when I got back on the
> road and shifted back to 2 high the front axel would not disengage. I
> was 120 miles from home . So I had to drive it home with the T-case in 2
> high . Will this hurt the t-case?
> Normally when the t-case is in 2 high you can turn the front drive
> shaft buy hand. Could use some help.
>
>
> 47 *****'s
> 50 *****'s Truck
> 87 Wrangler
> 97 Wrangler
>
#15
Guest
Posts: n/a
Re: Stuck in 4wheel
Next time, try going backwards for about 10 feet to release the stress on
the front end. Normally, the front axle might not release for a while, and
then it lets go with a thud.
You shouldn't have hurt anything with the front end locked.
"Mike Chambers" <MikeChambers@webtv.net> wrote in message
news:28735-417C6426-146@storefull-3116.bay.webtv.net...
> I have a problem with my 87 Wrangler.
> I was out doing a little wheeling on Saturday when I got back on the
> road and shifted back to 2 high the front axel would not disengage. I
> was 120 miles from home . So I had to drive it home with the T-case in 2
> high . Will this hurt the t-case?
> Normally when the t-case is in 2 high you can turn the front drive
> shaft buy hand. Could use some help.
>
>
> 47 *****'s
> 50 *****'s Truck
> 87 Wrangler
> 97 Wrangler
>
the front end. Normally, the front axle might not release for a while, and
then it lets go with a thud.
You shouldn't have hurt anything with the front end locked.
"Mike Chambers" <MikeChambers@webtv.net> wrote in message
news:28735-417C6426-146@storefull-3116.bay.webtv.net...
> I have a problem with my 87 Wrangler.
> I was out doing a little wheeling on Saturday when I got back on the
> road and shifted back to 2 high the front axel would not disengage. I
> was 120 miles from home . So I had to drive it home with the T-case in 2
> high . Will this hurt the t-case?
> Normally when the t-case is in 2 high you can turn the front drive
> shaft buy hand. Could use some help.
>
>
> 47 *****'s
> 50 *****'s Truck
> 87 Wrangler
> 97 Wrangler
>
#16
Guest
Posts: n/a
Re: Stuck in 4wheel
Next time, try going backwards for about 10 feet to release the stress on
the front end. Normally, the front axle might not release for a while, and
then it lets go with a thud.
You shouldn't have hurt anything with the front end locked.
"Mike Chambers" <MikeChambers@webtv.net> wrote in message
news:28735-417C6426-146@storefull-3116.bay.webtv.net...
> I have a problem with my 87 Wrangler.
> I was out doing a little wheeling on Saturday when I got back on the
> road and shifted back to 2 high the front axel would not disengage. I
> was 120 miles from home . So I had to drive it home with the T-case in 2
> high . Will this hurt the t-case?
> Normally when the t-case is in 2 high you can turn the front drive
> shaft buy hand. Could use some help.
>
>
> 47 *****'s
> 50 *****'s Truck
> 87 Wrangler
> 97 Wrangler
>
the front end. Normally, the front axle might not release for a while, and
then it lets go with a thud.
You shouldn't have hurt anything with the front end locked.
"Mike Chambers" <MikeChambers@webtv.net> wrote in message
news:28735-417C6426-146@storefull-3116.bay.webtv.net...
> I have a problem with my 87 Wrangler.
> I was out doing a little wheeling on Saturday when I got back on the
> road and shifted back to 2 high the front axel would not disengage. I
> was 120 miles from home . So I had to drive it home with the T-case in 2
> high . Will this hurt the t-case?
> Normally when the t-case is in 2 high you can turn the front drive
> shaft buy hand. Could use some help.
>
>
> 47 *****'s
> 50 *****'s Truck
> 87 Wrangler
> 97 Wrangler
>