Strong Bumpers
#21
Guest
Posts: n/a
Re: Strong Bumpers
You don't want it too strong or you will end up with a perfect bumper and a
bent chassis.
The shock has to go somewhere.
Dave Milne, Scotland
"Kevin" <Kevin@el.net> wrote in message
news:xwGLb.9743$I06.59248@attbi_s01...
>
>
> Are any of the front or rear jeep bumpers you can buy as strong as one
> would be if you made it out of 1/8, or 1/4 thick 6x6 angle iron. I
> would like something a bullet proof as possible. Most of them in the
> jeep books dont seem to be made out of stock as thick as 1/8, or 1/4
> steel. I dont care how heavy it is as long as it could stop someone who
> hit me from doing damage to the jeep.
>
bent chassis.
The shock has to go somewhere.
Dave Milne, Scotland
"Kevin" <Kevin@el.net> wrote in message
news:xwGLb.9743$I06.59248@attbi_s01...
>
>
> Are any of the front or rear jeep bumpers you can buy as strong as one
> would be if you made it out of 1/8, or 1/4 thick 6x6 angle iron. I
> would like something a bullet proof as possible. Most of them in the
> jeep books dont seem to be made out of stock as thick as 1/8, or 1/4
> steel. I dont care how heavy it is as long as it could stop someone who
> hit me from doing damage to the jeep.
>
#22
Guest
Posts: n/a
Re: Strong Bumpers
You don't want it too strong or you will end up with a perfect bumper and a
bent chassis.
The shock has to go somewhere.
Dave Milne, Scotland
"Kevin" <Kevin@el.net> wrote in message
news:xwGLb.9743$I06.59248@attbi_s01...
>
>
> Are any of the front or rear jeep bumpers you can buy as strong as one
> would be if you made it out of 1/8, or 1/4 thick 6x6 angle iron. I
> would like something a bullet proof as possible. Most of them in the
> jeep books dont seem to be made out of stock as thick as 1/8, or 1/4
> steel. I dont care how heavy it is as long as it could stop someone who
> hit me from doing damage to the jeep.
>
bent chassis.
The shock has to go somewhere.
Dave Milne, Scotland
"Kevin" <Kevin@el.net> wrote in message
news:xwGLb.9743$I06.59248@attbi_s01...
>
>
> Are any of the front or rear jeep bumpers you can buy as strong as one
> would be if you made it out of 1/8, or 1/4 thick 6x6 angle iron. I
> would like something a bullet proof as possible. Most of them in the
> jeep books dont seem to be made out of stock as thick as 1/8, or 1/4
> steel. I dont care how heavy it is as long as it could stop someone who
> hit me from doing damage to the jeep.
>
Thread
Thread Starter
Forum
Replies
Last Post
jeepadmin
Jeep News
1
12-12-2011 06:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)