stripped torx
 

Hi Guys,

i'm sure you've all encountered this problem, and therefore may have a quick
fix or two.

i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
pieces replacing the original pieces.

took my torx heads and wrench, took one out no problem.

next one ended up stripped..and the next one...managed to get them all back
in til i fix this dilema. i used small movements, wasn't trying to take the
screw out in one go...seems like the metal is so darn soft. obviously i'm
going to be taking out about a dozen plus, so...

any suggestions would be great.

Steve

Re: stripped torx
 

diablo wrote:
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

If you have a Dremel, you could 'cut' a slot in them, so you can use a
slotted screw driver.

?

Re: stripped torx
 

diablo wrote:
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

If you have a Dremel, you could 'cut' a slot in them, so you can use a
slotted screw driver.

?

Re: stripped torx
 

diablo wrote:
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

If you have a Dremel, you could 'cut' a slot in them, so you can use a
slotted screw driver.

?

Re: stripped torx
 

diablo wrote:
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

If you have a Dremel, you could 'cut' a slot in them, so you can use a
slotted screw driver.

?

Re: stripped torx
 

put torx socket in and strike the back of it with a hammer hard real hard
and firm DON"T MISS.
then with your tool with a forceful jerk it should come out if not get a
bigger hammer hit it harder and spray with some sort of penetrating oil. let
sit then over night then again with the hammer and remove.
I managed to get all but one on my 89 yj out with this method.

if the torx head is stripped bad and useless try pounding in an allan tool
to fit be sure you have done the above pre removal procedures.

if that fails start drilling small size bit to big size right on dead centre
of the bolt.

when putting in the new ones coat them with lithium grease.

good luck

"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
> quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
> back
> in til i fix this dilema. i used small movements, wasn't trying to take
> the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

put torx socket in and strike the back of it with a hammer hard real hard
and firm DON"T MISS.
then with your tool with a forceful jerk it should come out if not get a
bigger hammer hit it harder and spray with some sort of penetrating oil. let
sit then over night then again with the hammer and remove.
I managed to get all but one on my 89 yj out with this method.

if the torx head is stripped bad and useless try pounding in an allan tool
to fit be sure you have done the above pre removal procedures.

if that fails start drilling small size bit to big size right on dead centre
of the bolt.

when putting in the new ones coat them with lithium grease.

good luck

"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
> quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
> back
> in til i fix this dilema. i used small movements, wasn't trying to take
> the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

put torx socket in and strike the back of it with a hammer hard real hard
and firm DON"T MISS.
then with your tool with a forceful jerk it should come out if not get a
bigger hammer hit it harder and spray with some sort of penetrating oil. let
sit then over night then again with the hammer and remove.
I managed to get all but one on my 89 yj out with this method.

if the torx head is stripped bad and useless try pounding in an allan tool
to fit be sure you have done the above pre removal procedures.

if that fails start drilling small size bit to big size right on dead centre
of the bolt.

when putting in the new ones coat them with lithium grease.

good luck

"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
> quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
> back
> in til i fix this dilema. i used small movements, wasn't trying to take
> the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

put torx socket in and strike the back of it with a hammer hard real hard
and firm DON"T MISS.
then with your tool with a forceful jerk it should come out if not get a
bigger hammer hit it harder and spray with some sort of penetrating oil. let
sit then over night then again with the hammer and remove.
I managed to get all but one on my 89 yj out with this method.

if the torx head is stripped bad and useless try pounding in an allan tool
to fit be sure you have done the above pre removal procedures.

if that fails start drilling small size bit to big size right on dead centre
of the bolt.

when putting in the new ones coat them with lithium grease.

good luck

"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
> quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
> back
> in til i fix this dilema. i used small movements, wasn't trying to take
> the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

If there is paint on them, the proper sized torx won't usually fit....
One size down 'seems' to fit nice and tight, but the soft paint crushes
and zip, off go the points.

A torch also works well. They have a thread sealer on lots that is heat
activated and it removes the paint.

The ones into the body tub have nuts glued inside so you have to remove
the dash to get the top door hinge off normally. Those you can hold
with the torx and use a wrench on the insides or if you aren't saving
the bolts, you can just drill the heads off with a 3/8 bit and punch the
stems through. You will still need the dash off to get the new nuts
back in there....

A slot with a dremil tool using a fiberglass cutting wheel works for a
place to hit it with a punch or flat head to get it moving.

A few ideas for you...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

diablo wrote:
>
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve

Re: stripped torx
 

If there is paint on them, the proper sized torx won't usually fit....
One size down 'seems' to fit nice and tight, but the soft paint crushes
and zip, off go the points.

A torch also works well. They have a thread sealer on lots that is heat
activated and it removes the paint.

The ones into the body tub have nuts glued inside so you have to remove
the dash to get the top door hinge off normally. Those you can hold
with the torx and use a wrench on the insides or if you aren't saving
the bolts, you can just drill the heads off with a 3/8 bit and punch the
stems through. You will still need the dash off to get the new nuts
back in there....

A slot with a dremil tool using a fiberglass cutting wheel works for a
place to hit it with a punch or flat head to get it moving.

A few ideas for you...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

diablo wrote:
>
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve

Re: stripped torx
 

If there is paint on them, the proper sized torx won't usually fit....
One size down 'seems' to fit nice and tight, but the soft paint crushes
and zip, off go the points.

A torch also works well. They have a thread sealer on lots that is heat
activated and it removes the paint.

The ones into the body tub have nuts glued inside so you have to remove
the dash to get the top door hinge off normally. Those you can hold
with the torx and use a wrench on the insides or if you aren't saving
the bolts, you can just drill the heads off with a 3/8 bit and punch the
stems through. You will still need the dash off to get the new nuts
back in there....

A slot with a dremil tool using a fiberglass cutting wheel works for a
place to hit it with a punch or flat head to get it moving.

A few ideas for you...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

diablo wrote:
>
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve

Re: stripped torx
 

If there is paint on them, the proper sized torx won't usually fit....
One size down 'seems' to fit nice and tight, but the soft paint crushes
and zip, off go the points.

A torch also works well. They have a thread sealer on lots that is heat
activated and it removes the paint.

The ones into the body tub have nuts glued inside so you have to remove
the dash to get the top door hinge off normally. Those you can hold
with the torx and use a wrench on the insides or if you aren't saving
the bolts, you can just drill the heads off with a 3/8 bit and punch the
stems through. You will still need the dash off to get the new nuts
back in there....

A slot with a dremil tool using a fiberglass cutting wheel works for a
place to hit it with a punch or flat head to get it moving.

A few ideas for you...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

diablo wrote:
>
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve

Re: stripped torx
 

Hi Steve,
They were put in using an impact driver, that's what takes to get
them started out: http://www.----------.com/impactDriver.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
diablo wrote:
>
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve

Re: stripped torx
 

Hi Steve,
They were put in using an impact driver, that's what takes to get
them started out: http://www.----------.com/impactDriver.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
diablo wrote:
>
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve

Re: stripped torx
 

Hi Steve,
They were put in using an impact driver, that's what takes to get
them started out: http://www.----------.com/impactDriver.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
diablo wrote:
>
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve

Re: stripped torx
 

Hi Steve,
They were put in using an impact driver, that's what takes to get
them started out: http://www.----------.com/impactDriver.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
diablo wrote:
>
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all back
> in til i fix this dilema. i used small movements, wasn't trying to take the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve

Re: stripped torx
 

Everyone should own a 5 piece reverse drill bits, their cheap. Get a pack
and then hook it up to your electric drill and put it on reverse. The drill
bit will grab and back out your torx bolt. Same with larger bolts. Those
reverse bits are priceless...
Nick

--
http://members.cox.net/nnote/
"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
back
> in til i fix this dilema. i used small movements, wasn't trying to take
the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

Everyone should own a 5 piece reverse drill bits, their cheap. Get a pack
and then hook it up to your electric drill and put it on reverse. The drill
bit will grab and back out your torx bolt. Same with larger bolts. Those
reverse bits are priceless...
Nick

--
http://members.cox.net/nnote/
"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
back
> in til i fix this dilema. i used small movements, wasn't trying to take
the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

Everyone should own a 5 piece reverse drill bits, their cheap. Get a pack
and then hook it up to your electric drill and put it on reverse. The drill
bit will grab and back out your torx bolt. Same with larger bolts. Those
reverse bits are priceless...
Nick

--
http://members.cox.net/nnote/
"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
back
> in til i fix this dilema. i used small movements, wasn't trying to take
the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

Everyone should own a 5 piece reverse drill bits, their cheap. Get a pack
and then hook it up to your electric drill and put it on reverse. The drill
bit will grab and back out your torx bolt. Same with larger bolts. Those
reverse bits are priceless...
Nick

--
http://members.cox.net/nnote/
"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
back
> in til i fix this dilema. i used small movements, wasn't trying to take
the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

And there i was thinking something like this would be an hour job ;)

thanks for your help guys!

Steve

"Nick" <nnote@despammed.com> wrote in message
news:hsPje.507$yp.483@fed1read02...
>
> Everyone should own a 5 piece reverse drill bits, their cheap. Get a pack
> and then hook it up to your electric drill and put it on reverse. The
drill
> bit will grab and back out your torx bolt. Same with larger bolts. Those
> reverse bits are priceless...
> Nick
>
> --
> http://members.cox.net/nnote/
> "diablo" <diablo@msn.com> wrote in message
> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > Hi Guys,
> >
> > i'm sure you've all encountered this problem, and therefore may have a
> quick
> > fix or two.
> >
> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> > pieces replacing the original pieces.
> >
> > took my torx heads and wrench, took one out no problem.
> >
> > next one ended up stripped..and the next one...managed to get them all
> back
> > in til i fix this dilema. i used small movements, wasn't trying to take
> the
> > screw out in one go...seems like the metal is so darn soft. obviously
i'm
> > going to be taking out about a dozen plus, so...
> >
> > any suggestions would be great.
> >
> > Steve
> >
> >
>
>

Re: stripped torx
 

And there i was thinking something like this would be an hour job ;)

thanks for your help guys!

Steve

"Nick" <nnote@despammed.com> wrote in message
news:hsPje.507$yp.483@fed1read02...
>
> Everyone should own a 5 piece reverse drill bits, their cheap. Get a pack
> and then hook it up to your electric drill and put it on reverse. The
drill
> bit will grab and back out your torx bolt. Same with larger bolts. Those
> reverse bits are priceless...
> Nick
>
> --
> http://members.cox.net/nnote/
> "diablo" <diablo@msn.com> wrote in message
> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > Hi Guys,
> >
> > i'm sure you've all encountered this problem, and therefore may have a
> quick
> > fix or two.
> >
> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> > pieces replacing the original pieces.
> >
> > took my torx heads and wrench, took one out no problem.
> >
> > next one ended up stripped..and the next one...managed to get them all
> back
> > in til i fix this dilema. i used small movements, wasn't trying to take
> the
> > screw out in one go...seems like the metal is so darn soft. obviously
i'm
> > going to be taking out about a dozen plus, so...
> >
> > any suggestions would be great.
> >
> > Steve
> >
> >
>
>

Re: stripped torx
 

And there i was thinking something like this would be an hour job ;)

thanks for your help guys!

Steve

"Nick" <nnote@despammed.com> wrote in message
news:hsPje.507$yp.483@fed1read02...
>
> Everyone should own a 5 piece reverse drill bits, their cheap. Get a pack
> and then hook it up to your electric drill and put it on reverse. The
drill
> bit will grab and back out your torx bolt. Same with larger bolts. Those
> reverse bits are priceless...
> Nick
>
> --
> http://members.cox.net/nnote/
> "diablo" <diablo@msn.com> wrote in message
> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > Hi Guys,
> >
> > i'm sure you've all encountered this problem, and therefore may have a
> quick
> > fix or two.
> >
> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> > pieces replacing the original pieces.
> >
> > took my torx heads and wrench, took one out no problem.
> >
> > next one ended up stripped..and the next one...managed to get them all
> back
> > in til i fix this dilema. i used small movements, wasn't trying to take
> the
> > screw out in one go...seems like the metal is so darn soft. obviously
i'm
> > going to be taking out about a dozen plus, so...
> >
> > any suggestions would be great.
> >
> > Steve
> >
> >
>
>

Re: stripped torx
 

And there i was thinking something like this would be an hour job ;)

thanks for your help guys!

Steve

"Nick" <nnote@despammed.com> wrote in message
news:hsPje.507$yp.483@fed1read02...
>
> Everyone should own a 5 piece reverse drill bits, their cheap. Get a pack
> and then hook it up to your electric drill and put it on reverse. The
drill
> bit will grab and back out your torx bolt. Same with larger bolts. Those
> reverse bits are priceless...
> Nick
>
> --
> http://members.cox.net/nnote/
> "diablo" <diablo@msn.com> wrote in message
> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > Hi Guys,
> >
> > i'm sure you've all encountered this problem, and therefore may have a
> quick
> > fix or two.
> >
> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> > pieces replacing the original pieces.
> >
> > took my torx heads and wrench, took one out no problem.
> >
> > next one ended up stripped..and the next one...managed to get them all
> back
> > in til i fix this dilema. i used small movements, wasn't trying to take
> the
> > screw out in one go...seems like the metal is so darn soft. obviously
i'm
> > going to be taking out about a dozen plus, so...
> >
> > any suggestions would be great.
> >
> > Steve
> >
> >
>
>

Re: stripped torx
 

As Mike says, they are put on with a heat-activated thread sealer. I tried
the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
(replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
just broke the sockets - twisted the mothers right off. The thread sealer is
evil stuff. Heat is likely the only way to get it off, but I don't know how
you would do it and not ruin your paint. Possibly a soldering iron or gun
held right on the head would create enough heat to melt it. You may want to
talk to a Jeep body shop to see how they do it.

Dana
93 YJ
90 XJ Ltd.
---------------
91 Grand Wagoneer Ltd.
82 Cherokee
76 Cherokee

"It's in our country's interests to find those who would do harm to us and
get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
> quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
> back
> in til i fix this dilema. i used small movements, wasn't trying to take
> the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

As Mike says, they are put on with a heat-activated thread sealer. I tried
the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
(replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
just broke the sockets - twisted the mothers right off. The thread sealer is
evil stuff. Heat is likely the only way to get it off, but I don't know how
you would do it and not ruin your paint. Possibly a soldering iron or gun
held right on the head would create enough heat to melt it. You may want to
talk to a Jeep body shop to see how they do it.

Dana
93 YJ
90 XJ Ltd.
---------------
91 Grand Wagoneer Ltd.
82 Cherokee
76 Cherokee

"It's in our country's interests to find those who would do harm to us and
get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
> quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
> back
> in til i fix this dilema. i used small movements, wasn't trying to take
> the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

As Mike says, they are put on with a heat-activated thread sealer. I tried
the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
(replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
just broke the sockets - twisted the mothers right off. The thread sealer is
evil stuff. Heat is likely the only way to get it off, but I don't know how
you would do it and not ruin your paint. Possibly a soldering iron or gun
held right on the head would create enough heat to melt it. You may want to
talk to a Jeep body shop to see how they do it.

Dana
93 YJ
90 XJ Ltd.
---------------
91 Grand Wagoneer Ltd.
82 Cherokee
76 Cherokee

"It's in our country's interests to find those who would do harm to us and
get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
> quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
> back
> in til i fix this dilema. i used small movements, wasn't trying to take
> the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

As Mike says, they are put on with a heat-activated thread sealer. I tried
the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
(replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
just broke the sockets - twisted the mothers right off. The thread sealer is
evil stuff. Heat is likely the only way to get it off, but I don't know how
you would do it and not ruin your paint. Possibly a soldering iron or gun
held right on the head would create enough heat to melt it. You may want to
talk to a Jeep body shop to see how they do it.

Dana
93 YJ
90 XJ Ltd.
---------------
91 Grand Wagoneer Ltd.
82 Cherokee
76 Cherokee

"It's in our country's interests to find those who would do harm to us and
get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
"diablo" <diablo@msn.com> wrote in message
news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> Hi Guys,
>
> i'm sure you've all encountered this problem, and therefore may have a
> quick
> fix or two.
>
> i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> SS
> pieces replacing the original pieces.
>
> took my torx heads and wrench, took one out no problem.
>
> next one ended up stripped..and the next one...managed to get them all
> back
> in til i fix this dilema. i used small movements, wasn't trying to take
> the
> screw out in one go...seems like the metal is so darn soft. obviously i'm
> going to be taking out about a dozen plus, so...
>
> any suggestions would be great.
>
> Steve
>
>

Re: stripped torx
 

Next time buy Craftsman or Snap-On.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Dana Rohleder wrote:
>
> As Mike says, they are put on with a heat-activated thread sealer. I tried
> the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
> (replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
> up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
> just broke the sockets - twisted the mothers right off. The thread sealer is
> evil stuff. Heat is likely the only way to get it off, but I don't know how
> you would do it and not ruin your paint. Possibly a soldering iron or gun
> held right on the head would create enough heat to melt it. You may want to
> talk to a Jeep body shop to see how they do it.
>
> Dana
> 93 YJ
> 90 XJ Ltd.
> ---------------
> 91 Grand Wagoneer Ltd.
> 82 Cherokee
> 76 Cherokee
>
> "It's in our country's interests to find those who would do harm to us and
> get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
> "diablo" <diablo@msn.com> wrote in message
> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > Hi Guys,
> >
> > i'm sure you've all encountered this problem, and therefore may have a
> > quick
> > fix or two.
> >
> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> > SS
> > pieces replacing the original pieces.
> >
> > took my torx heads and wrench, took one out no problem.
> >
> > next one ended up stripped..and the next one...managed to get them all
> > back
> > in til i fix this dilema. i used small movements, wasn't trying to take
> > the
> > screw out in one go...seems like the metal is so darn soft. obviously i'm
> > going to be taking out about a dozen plus, so...
> >
> > any suggestions would be great.
> >
> > Steve
> >
> >

Re: stripped torx
 

Next time buy Craftsman or Snap-On.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Dana Rohleder wrote:
>
> As Mike says, they are put on with a heat-activated thread sealer. I tried
> the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
> (replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
> up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
> just broke the sockets - twisted the mothers right off. The thread sealer is
> evil stuff. Heat is likely the only way to get it off, but I don't know how
> you would do it and not ruin your paint. Possibly a soldering iron or gun
> held right on the head would create enough heat to melt it. You may want to
> talk to a Jeep body shop to see how they do it.
>
> Dana
> 93 YJ
> 90 XJ Ltd.
> ---------------
> 91 Grand Wagoneer Ltd.
> 82 Cherokee
> 76 Cherokee
>
> "It's in our country's interests to find those who would do harm to us and
> get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
> "diablo" <diablo@msn.com> wrote in message
> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > Hi Guys,
> >
> > i'm sure you've all encountered this problem, and therefore may have a
> > quick
> > fix or two.
> >
> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> > SS
> > pieces replacing the original pieces.
> >
> > took my torx heads and wrench, took one out no problem.
> >
> > next one ended up stripped..and the next one...managed to get them all
> > back
> > in til i fix this dilema. i used small movements, wasn't trying to take
> > the
> > screw out in one go...seems like the metal is so darn soft. obviously i'm
> > going to be taking out about a dozen plus, so...
> >
> > any suggestions would be great.
> >
> > Steve
> >
> >

Re: stripped torx
 

Next time buy Craftsman or Snap-On.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Dana Rohleder wrote:
>
> As Mike says, they are put on with a heat-activated thread sealer. I tried
> the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
> (replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
> up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
> just broke the sockets - twisted the mothers right off. The thread sealer is
> evil stuff. Heat is likely the only way to get it off, but I don't know how
> you would do it and not ruin your paint. Possibly a soldering iron or gun
> held right on the head would create enough heat to melt it. You may want to
> talk to a Jeep body shop to see how they do it.
>
> Dana
> 93 YJ
> 90 XJ Ltd.
> ---------------
> 91 Grand Wagoneer Ltd.
> 82 Cherokee
> 76 Cherokee
>
> "It's in our country's interests to find those who would do harm to us and
> get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
> "diablo" <diablo@msn.com> wrote in message
> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > Hi Guys,
> >
> > i'm sure you've all encountered this problem, and therefore may have a
> > quick
> > fix or two.
> >
> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> > SS
> > pieces replacing the original pieces.
> >
> > took my torx heads and wrench, took one out no problem.
> >
> > next one ended up stripped..and the next one...managed to get them all
> > back
> > in til i fix this dilema. i used small movements, wasn't trying to take
> > the
> > screw out in one go...seems like the metal is so darn soft. obviously i'm
> > going to be taking out about a dozen plus, so...
> >
> > any suggestions would be great.
> >
> > Steve
> >
> >

Re: stripped torx
 

Next time buy Craftsman or Snap-On.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Dana Rohleder wrote:
>
> As Mike says, they are put on with a heat-activated thread sealer. I tried
> the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
> (replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
> up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
> just broke the sockets - twisted the mothers right off. The thread sealer is
> evil stuff. Heat is likely the only way to get it off, but I don't know how
> you would do it and not ruin your paint. Possibly a soldering iron or gun
> held right on the head would create enough heat to melt it. You may want to
> talk to a Jeep body shop to see how they do it.
>
> Dana
> 93 YJ
> 90 XJ Ltd.
> ---------------
> 91 Grand Wagoneer Ltd.
> 82 Cherokee
> 76 Cherokee
>
> "It's in our country's interests to find those who would do harm to us and
> get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
> "diablo" <diablo@msn.com> wrote in message
> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > Hi Guys,
> >
> > i'm sure you've all encountered this problem, and therefore may have a
> > quick
> > fix or two.
> >
> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> > SS
> > pieces replacing the original pieces.
> >
> > took my torx heads and wrench, took one out no problem.
> >
> > next one ended up stripped..and the next one...managed to get them all
> > back
> > in til i fix this dilema. i used small movements, wasn't trying to take
> > the
> > screw out in one go...seems like the metal is so darn soft. obviously i'm
> > going to be taking out about a dozen plus, so...
> >
> > any suggestions would be great.
> >
> > Steve
> >
> >

Re: stripped torx
 

the left spin drill bits are the best way to if you can get the kit with the
matching extractors but when push comes to shove
take a drill bit that is i/8 inch bigger than the torqs and drill it out carefully
so it just pops thru the hole then there is enough hanging out from what it
holding in.a good and new visegrip can get a bite and with a little heat to
release the lock tight it will come out

"L.W.(ßill) ------ III" wrote:

> Next time buy Craftsman or Snap-On.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dana Rohleder wrote:
> >
> > As Mike says, they are put on with a heat-activated thread sealer. I tried
> > the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
> > (replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
> > up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
> > just broke the sockets - twisted the mothers right off. The thread sealer is
> > evil stuff. Heat is likely the only way to get it off, but I don't know how
> > you would do it and not ruin your paint. Possibly a soldering iron or gun
> > held right on the head would create enough heat to melt it. You may want to
> > talk to a Jeep body shop to see how they do it.
> >
> > Dana
> > 93 YJ
> > 90 XJ Ltd.
> > ---------------
> > 91 Grand Wagoneer Ltd.
> > 82 Cherokee
> > 76 Cherokee
> >
> > "It's in our country's interests to find those who would do harm to us and
> > get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
> > "diablo" <diablo@msn.com> wrote in message
> > news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > > Hi Guys,
> > >
> > > i'm sure you've all encountered this problem, and therefore may have a
> > > quick
> > > fix or two.
> > >
> > > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> > > SS
> > > pieces replacing the original pieces.
> > >
> > > took my torx heads and wrench, took one out no problem.
> > >
> > > next one ended up stripped..and the next one...managed to get them all
> > > back
> > > in til i fix this dilema. i used small movements, wasn't trying to take
> > > the
> > > screw out in one go...seems like the metal is so darn soft. obviously i'm
> > > going to be taking out about a dozen plus, so...
> > >
> > > any suggestions would be great.
> > >
> > > Steve
> > >
> > >

Re: stripped torx
 

the left spin drill bits are the best way to if you can get the kit with the
matching extractors but when push comes to shove
take a drill bit that is i/8 inch bigger than the torqs and drill it out carefully
so it just pops thru the hole then there is enough hanging out from what it
holding in.a good and new visegrip can get a bite and with a little heat to
release the lock tight it will come out

"L.W.(ßill) ------ III" wrote:

> Next time buy Craftsman or Snap-On.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dana Rohleder wrote:
> >
> > As Mike says, they are put on with a heat-activated thread sealer. I tried
> > the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
> > (replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
> > up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
> > just broke the sockets - twisted the mothers right off. The thread sealer is
> > evil stuff. Heat is likely the only way to get it off, but I don't know how
> > you would do it and not ruin your paint. Possibly a soldering iron or gun
> > held right on the head would create enough heat to melt it. You may want to
> > talk to a Jeep body shop to see how they do it.
> >
> > Dana
> > 93 YJ
> > 90 XJ Ltd.
> > ---------------
> > 91 Grand Wagoneer Ltd.
> > 82 Cherokee
> > 76 Cherokee
> >
> > "It's in our country's interests to find those who would do harm to us and
> > get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
> > "diablo" <diablo@msn.com> wrote in message
> > news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > > Hi Guys,
> > >
> > > i'm sure you've all encountered this problem, and therefore may have a
> > > quick
> > > fix or two.
> > >
> > > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> > > SS
> > > pieces replacing the original pieces.
> > >
> > > took my torx heads and wrench, took one out no problem.
> > >
> > > next one ended up stripped..and the next one...managed to get them all
> > > back
> > > in til i fix this dilema. i used small movements, wasn't trying to take
> > > the
> > > screw out in one go...seems like the metal is so darn soft. obviously i'm
> > > going to be taking out about a dozen plus, so...
> > >
> > > any suggestions would be great.
> > >
> > > Steve
> > >
> > >

Re: stripped torx
 

the left spin drill bits are the best way to if you can get the kit with the
matching extractors but when push comes to shove
take a drill bit that is i/8 inch bigger than the torqs and drill it out carefully
so it just pops thru the hole then there is enough hanging out from what it
holding in.a good and new visegrip can get a bite and with a little heat to
release the lock tight it will come out

"L.W.(ßill) ------ III" wrote:

> Next time buy Craftsman or Snap-On.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dana Rohleder wrote:
> >
> > As Mike says, they are put on with a heat-activated thread sealer. I tried
> > the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
> > (replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
> > up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
> > just broke the sockets - twisted the mothers right off. The thread sealer is
> > evil stuff. Heat is likely the only way to get it off, but I don't know how
> > you would do it and not ruin your paint. Possibly a soldering iron or gun
> > held right on the head would create enough heat to melt it. You may want to
> > talk to a Jeep body shop to see how they do it.
> >
> > Dana
> > 93 YJ
> > 90 XJ Ltd.
> > ---------------
> > 91 Grand Wagoneer Ltd.
> > 82 Cherokee
> > 76 Cherokee
> >
> > "It's in our country's interests to find those who would do harm to us and
> > get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
> > "diablo" <diablo@msn.com> wrote in message
> > news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > > Hi Guys,
> > >
> > > i'm sure you've all encountered this problem, and therefore may have a
> > > quick
> > > fix or two.
> > >
> > > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> > > SS
> > > pieces replacing the original pieces.
> > >
> > > took my torx heads and wrench, took one out no problem.
> > >
> > > next one ended up stripped..and the next one...managed to get them all
> > > back
> > > in til i fix this dilema. i used small movements, wasn't trying to take
> > > the
> > > screw out in one go...seems like the metal is so darn soft. obviously i'm
> > > going to be taking out about a dozen plus, so...
> > >
> > > any suggestions would be great.
> > >
> > > Steve
> > >
> > >

Re: stripped torx
 

the left spin drill bits are the best way to if you can get the kit with the
matching extractors but when push comes to shove
take a drill bit that is i/8 inch bigger than the torqs and drill it out carefully
so it just pops thru the hole then there is enough hanging out from what it
holding in.a good and new visegrip can get a bite and with a little heat to
release the lock tight it will come out

"L.W.(ßill) ------ III" wrote:

> Next time buy Craftsman or Snap-On.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dana Rohleder wrote:
> >
> > As Mike says, they are put on with a heat-activated thread sealer. I tried
> > the impact wrench method suggested by Bill on my YJ - 5 broken torx sockets
> > (replaced by NAPA under warranty) and 3 big gouges in my paint later, I gave
> > up. I managed to get only one bolt out. Luckily, I didn't strip any heads,
> > just broke the sockets - twisted the mothers right off. The thread sealer is
> > evil stuff. Heat is likely the only way to get it off, but I don't know how
> > you would do it and not ruin your paint. Possibly a soldering iron or gun
> > held right on the head would create enough heat to melt it. You may want to
> > talk to a Jeep body shop to see how they do it.
> >
> > Dana
> > 93 YJ
> > 90 XJ Ltd.
> > ---------------
> > 91 Grand Wagoneer Ltd.
> > 82 Cherokee
> > 76 Cherokee
> >
> > "It's in our country's interests to find those who would do harm to us and
> > get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
> > "diablo" <diablo@msn.com> wrote in message
> > news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
> > > Hi Guys,
> > >
> > > i'm sure you've all encountered this problem, and therefore may have a
> > > quick
> > > fix or two.
> > >
> > > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ with
> > > SS
> > > pieces replacing the original pieces.
> > >
> > > took my torx heads and wrench, took one out no problem.
> > >
> > > next one ended up stripped..and the next one...managed to get them all
> > > back
> > > in til i fix this dilema. i used small movements, wasn't trying to take
> > > the
> > > screw out in one go...seems like the metal is so darn soft. obviously i'm
> > > going to be taking out about a dozen plus, so...
> > >
> > > any suggestions would be great.
> > >
> > > Steve
> > >
> > >

Re: stripped torx
 

My Craftsman socket was the first one to break - even before I started using
the impact wrench. Then my neighbor's S/K. That is when I went to NAPA
because it was a 3 mile drive vs. 20 to replace the Craftsman. I bought 4
more at NAPA, broke 2 more with the impact wrench, then gave up. All 3
brands simply twisted halfway down the shaft & broke. I think the reason was
because the head of the bolts is only a couple mm deep, so the weakest part
of the shaft was left without support. Maybe they make some that are
designed for impact wrenches, but I couldn't find any that day.
--
Dana

93 YJ
90 XJ Ltd.
---------------
91 Grand Wagoneer Ltd.
82 Cherokee
76 Cherokee


"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message
news:428FD6B2.62EEC3EC@cox.net...
> Next time buy Craftsman or Snap-On.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dana Rohleder wrote:
>>
>> As Mike says, they are put on with a heat-activated thread sealer. I
>> tried
>> the impact wrench method suggested by Bill on my YJ - 5 broken torx
>> sockets
>> (replaced by NAPA under warranty) and 3 big gouges in my paint later, I
>> gave
>> up. I managed to get only one bolt out. Luckily, I didn't strip any
>> heads,
>> just broke the sockets - twisted the mothers right off. The thread sealer
>> is
>> evil stuff. Heat is likely the only way to get it off, but I don't know
>> how
>> you would do it and not ruin your paint. Possibly a soldering iron or gun
>> held right on the head would create enough heat to melt it. You may want
>> to
>> talk to a Jeep body shop to see how they do it.
>>
>> Dana
>> 93 YJ
>> 90 XJ Ltd.
>> ---------------
>> 91 Grand Wagoneer Ltd.
>> 82 Cherokee
>> 76 Cherokee
>>
>> "It's in our country's interests to find those who would do harm to us
>> and
>> get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
>> "diablo" <diablo@msn.com> wrote in message
>> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
>> > Hi Guys,
>> >
>> > i'm sure you've all encountered this problem, and therefore may have a
>> > quick
>> > fix or two.
>> >
>> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ
>> > with
>> > SS
>> > pieces replacing the original pieces.
>> >
>> > took my torx heads and wrench, took one out no problem.
>> >
>> > next one ended up stripped..and the next one...managed to get them all
>> > back
>> > in til i fix this dilema. i used small movements, wasn't trying to take
>> > the
>> > screw out in one go...seems like the metal is so darn soft. obviously
>> > i'm
>> > going to be taking out about a dozen plus, so...
>> >
>> > any suggestions would be great.
>> >
>> > Steve
>> >
>> >

Re: stripped torx
 

My Craftsman socket was the first one to break - even before I started using
the impact wrench. Then my neighbor's S/K. That is when I went to NAPA
because it was a 3 mile drive vs. 20 to replace the Craftsman. I bought 4
more at NAPA, broke 2 more with the impact wrench, then gave up. All 3
brands simply twisted halfway down the shaft & broke. I think the reason was
because the head of the bolts is only a couple mm deep, so the weakest part
of the shaft was left without support. Maybe they make some that are
designed for impact wrenches, but I couldn't find any that day.
--
Dana

93 YJ
90 XJ Ltd.
---------------
91 Grand Wagoneer Ltd.
82 Cherokee
76 Cherokee


"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message
news:428FD6B2.62EEC3EC@cox.net...
> Next time buy Craftsman or Snap-On.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dana Rohleder wrote:
>>
>> As Mike says, they are put on with a heat-activated thread sealer. I
>> tried
>> the impact wrench method suggested by Bill on my YJ - 5 broken torx
>> sockets
>> (replaced by NAPA under warranty) and 3 big gouges in my paint later, I
>> gave
>> up. I managed to get only one bolt out. Luckily, I didn't strip any
>> heads,
>> just broke the sockets - twisted the mothers right off. The thread sealer
>> is
>> evil stuff. Heat is likely the only way to get it off, but I don't know
>> how
>> you would do it and not ruin your paint. Possibly a soldering iron or gun
>> held right on the head would create enough heat to melt it. You may want
>> to
>> talk to a Jeep body shop to see how they do it.
>>
>> Dana
>> 93 YJ
>> 90 XJ Ltd.
>> ---------------
>> 91 Grand Wagoneer Ltd.
>> 82 Cherokee
>> 76 Cherokee
>>
>> "It's in our country's interests to find those who would do harm to us
>> and
>> get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
>> "diablo" <diablo@msn.com> wrote in message
>> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
>> > Hi Guys,
>> >
>> > i'm sure you've all encountered this problem, and therefore may have a
>> > quick
>> > fix or two.
>> >
>> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ
>> > with
>> > SS
>> > pieces replacing the original pieces.
>> >
>> > took my torx heads and wrench, took one out no problem.
>> >
>> > next one ended up stripped..and the next one...managed to get them all
>> > back
>> > in til i fix this dilema. i used small movements, wasn't trying to take
>> > the
>> > screw out in one go...seems like the metal is so darn soft. obviously
>> > i'm
>> > going to be taking out about a dozen plus, so...
>> >
>> > any suggestions would be great.
>> >
>> > Steve
>> >
>> >

Re: stripped torx
 

My Craftsman socket was the first one to break - even before I started using
the impact wrench. Then my neighbor's S/K. That is when I went to NAPA
because it was a 3 mile drive vs. 20 to replace the Craftsman. I bought 4
more at NAPA, broke 2 more with the impact wrench, then gave up. All 3
brands simply twisted halfway down the shaft & broke. I think the reason was
because the head of the bolts is only a couple mm deep, so the weakest part
of the shaft was left without support. Maybe they make some that are
designed for impact wrenches, but I couldn't find any that day.
--
Dana

93 YJ
90 XJ Ltd.
---------------
91 Grand Wagoneer Ltd.
82 Cherokee
76 Cherokee


"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message
news:428FD6B2.62EEC3EC@cox.net...
> Next time buy Craftsman or Snap-On.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dana Rohleder wrote:
>>
>> As Mike says, they are put on with a heat-activated thread sealer. I
>> tried
>> the impact wrench method suggested by Bill on my YJ - 5 broken torx
>> sockets
>> (replaced by NAPA under warranty) and 3 big gouges in my paint later, I
>> gave
>> up. I managed to get only one bolt out. Luckily, I didn't strip any
>> heads,
>> just broke the sockets - twisted the mothers right off. The thread sealer
>> is
>> evil stuff. Heat is likely the only way to get it off, but I don't know
>> how
>> you would do it and not ruin your paint. Possibly a soldering iron or gun
>> held right on the head would create enough heat to melt it. You may want
>> to
>> talk to a Jeep body shop to see how they do it.
>>
>> Dana
>> 93 YJ
>> 90 XJ Ltd.
>> ---------------
>> 91 Grand Wagoneer Ltd.
>> 82 Cherokee
>> 76 Cherokee
>>
>> "It's in our country's interests to find those who would do harm to us
>> and
>> get them out of harm's way." GW Bush -Washington, D.C., April 28, 2005
>> "diablo" <diablo@msn.com> wrote in message
>> news:JFNje.218$lI2.177@tornado.rdc-kc.rr.com...
>> > Hi Guys,
>> >
>> > i'm sure you've all encountered this problem, and therefore may have a
>> > quick
>> > fix or two.
>> >
>> > i'm replacing all the hinges, catches, loops and mirrors on a 93 YJ
>> > with
>> > SS
>> > pieces replacing the original pieces.
>> >
>> > took my torx heads and wrench, took one out no problem.
>> >
>> > next one ended up stripped..and the next one...managed to get them all
>> > back
>> > in til i fix this dilema. i used small movements, wasn't trying to take
>> > the
>> > screw out in one go...seems like the metal is so darn soft. obviously
>> > i'm
>> > going to be taking out about a dozen plus, so...
>> >
>> > any suggestions would be great.
>> >
>> > Steve
>> >
>> >