strange enginr "rattle" timing chain?
#31
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
could be...I retourqued them a week later but who knows....If thats all it
is, awesome.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42643FB3.19F6E2DD@***.net...
> I'll put my money on Doug's suggestion, you forgot to retorque the
> header bolts after hot and again each week until they no long snug up.
> You may need a new gasket now.
> Bearing noise we will change pitch with RPM.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> I'll try that....I just dont want it to be engine noise, I wanted another
>> year before I heard any of that...
is, awesome.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42643FB3.19F6E2DD@***.net...
> I'll put my money on Doug's suggestion, you forgot to retorque the
> header bolts after hot and again each week until they no long snug up.
> You may need a new gasket now.
> Bearing noise we will change pitch with RPM.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> I'll try that....I just dont want it to be engine noise, I wanted another
>> year before I heard any of that...
#32
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
could be...I retourqued them a week later but who knows....If thats all it
is, awesome.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42643FB3.19F6E2DD@***.net...
> I'll put my money on Doug's suggestion, you forgot to retorque the
> header bolts after hot and again each week until they no long snug up.
> You may need a new gasket now.
> Bearing noise we will change pitch with RPM.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> I'll try that....I just dont want it to be engine noise, I wanted another
>> year before I heard any of that...
is, awesome.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42643FB3.19F6E2DD@***.net...
> I'll put my money on Doug's suggestion, you forgot to retorque the
> header bolts after hot and again each week until they no long snug up.
> You may need a new gasket now.
> Bearing noise we will change pitch with RPM.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> I'll try that....I just dont want it to be engine noise, I wanted another
>> year before I heard any of that...
#33
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
could be...I retourqued them a week later but who knows....If thats all it
is, awesome.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42643FB3.19F6E2DD@***.net...
> I'll put my money on Doug's suggestion, you forgot to retorque the
> header bolts after hot and again each week until they no long snug up.
> You may need a new gasket now.
> Bearing noise we will change pitch with RPM.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> I'll try that....I just dont want it to be engine noise, I wanted another
>> year before I heard any of that...
is, awesome.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42643FB3.19F6E2DD@***.net...
> I'll put my money on Doug's suggestion, you forgot to retorque the
> header bolts after hot and again each week until they no long snug up.
> You may need a new gasket now.
> Bearing noise we will change pitch with RPM.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> I'll try that....I just dont want it to be engine noise, I wanted another
>> year before I heard any of that...
#34
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
You need to retorque them 3 or 4 times. As Bill said, if they start to
leak, you can burn though and have to start over with a new gasket.
Pi-Eyed Piper wrote:
> could be...I retourqued them a week later but who knows....If thats all it
> is, awesome.
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42643FB3.19F6E2DD@***.net...
>
>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>header bolts after hot and again each week until they no long snug up.
>>You may need a new gasket now.
>> Bearing noise we will change pitch with RPM.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Pi-Eyed Piper wrote:
>>
>>>I'll try that....I just dont want it to be engine noise, I wanted another
>>>year before I heard any of that...
>
>
>
leak, you can burn though and have to start over with a new gasket.
Pi-Eyed Piper wrote:
> could be...I retourqued them a week later but who knows....If thats all it
> is, awesome.
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42643FB3.19F6E2DD@***.net...
>
>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>header bolts after hot and again each week until they no long snug up.
>>You may need a new gasket now.
>> Bearing noise we will change pitch with RPM.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Pi-Eyed Piper wrote:
>>
>>>I'll try that....I just dont want it to be engine noise, I wanted another
>>>year before I heard any of that...
>
>
>
#35
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
You need to retorque them 3 or 4 times. As Bill said, if they start to
leak, you can burn though and have to start over with a new gasket.
Pi-Eyed Piper wrote:
> could be...I retourqued them a week later but who knows....If thats all it
> is, awesome.
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42643FB3.19F6E2DD@***.net...
>
>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>header bolts after hot and again each week until they no long snug up.
>>You may need a new gasket now.
>> Bearing noise we will change pitch with RPM.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Pi-Eyed Piper wrote:
>>
>>>I'll try that....I just dont want it to be engine noise, I wanted another
>>>year before I heard any of that...
>
>
>
leak, you can burn though and have to start over with a new gasket.
Pi-Eyed Piper wrote:
> could be...I retourqued them a week later but who knows....If thats all it
> is, awesome.
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42643FB3.19F6E2DD@***.net...
>
>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>header bolts after hot and again each week until they no long snug up.
>>You may need a new gasket now.
>> Bearing noise we will change pitch with RPM.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Pi-Eyed Piper wrote:
>>
>>>I'll try that....I just dont want it to be engine noise, I wanted another
>>>year before I heard any of that...
>
>
>
#36
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
You need to retorque them 3 or 4 times. As Bill said, if they start to
leak, you can burn though and have to start over with a new gasket.
Pi-Eyed Piper wrote:
> could be...I retourqued them a week later but who knows....If thats all it
> is, awesome.
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42643FB3.19F6E2DD@***.net...
>
>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>header bolts after hot and again each week until they no long snug up.
>>You may need a new gasket now.
>> Bearing noise we will change pitch with RPM.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Pi-Eyed Piper wrote:
>>
>>>I'll try that....I just dont want it to be engine noise, I wanted another
>>>year before I heard any of that...
>
>
>
leak, you can burn though and have to start over with a new gasket.
Pi-Eyed Piper wrote:
> could be...I retourqued them a week later but who knows....If thats all it
> is, awesome.
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42643FB3.19F6E2DD@***.net...
>
>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>header bolts after hot and again each week until they no long snug up.
>>You may need a new gasket now.
>> Bearing noise we will change pitch with RPM.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Pi-Eyed Piper wrote:
>>
>>>I'll try that....I just dont want it to be engine noise, I wanted another
>>>year before I heard any of that...
>
>
>
#37
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
You need to retorque them 3 or 4 times. As Bill said, if they start to
leak, you can burn though and have to start over with a new gasket.
Pi-Eyed Piper wrote:
> could be...I retourqued them a week later but who knows....If thats all it
> is, awesome.
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42643FB3.19F6E2DD@***.net...
>
>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>header bolts after hot and again each week until they no long snug up.
>>You may need a new gasket now.
>> Bearing noise we will change pitch with RPM.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Pi-Eyed Piper wrote:
>>
>>>I'll try that....I just dont want it to be engine noise, I wanted another
>>>year before I heard any of that...
>
>
>
leak, you can burn though and have to start over with a new gasket.
Pi-Eyed Piper wrote:
> could be...I retourqued them a week later but who knows....If thats all it
> is, awesome.
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42643FB3.19F6E2DD@***.net...
>
>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>header bolts after hot and again each week until they no long snug up.
>>You may need a new gasket now.
>> Bearing noise we will change pitch with RPM.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Pi-Eyed Piper wrote:
>>
>>>I'll try that....I just dont want it to be engine noise, I wanted another
>>>year before I heard any of that...
>
>
>
#38
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
not the header, checked lastnight....theres about 20 degrees of turn in the
timing chain....gonna give that a try.
"RoyJ" <spamless@microsoft.net> wrote in message
news:sj99e.8870$An2.2619@newsread2.news.pas.earthl ink.net...
> You need to retorque them 3 or 4 times. As Bill said, if they start to
> leak, you can burn though and have to start over with a new gasket.
>
> Pi-Eyed Piper wrote:
>
>> could be...I retourqued them a week later but who knows....If thats all
>> it is, awesome.
>>
>>
>> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
>> news:42643FB3.19F6E2DD@***.net...
>>
>>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>>header bolts after hot and again each week until they no long snug up.
>>>You may need a new gasket now.
>>> Bearing noise we will change pitch with RPM.
>>> God Bless America, ßill O|||||||O
>>>mailto:-------------------- http://www.----------.com/
>>>
>>>Pi-Eyed Piper wrote:
>>>
>>>>I'll try that....I just dont want it to be engine noise, I wanted
>>>>another
>>>>year before I heard any of that...
>>
>>
timing chain....gonna give that a try.
"RoyJ" <spamless@microsoft.net> wrote in message
news:sj99e.8870$An2.2619@newsread2.news.pas.earthl ink.net...
> You need to retorque them 3 or 4 times. As Bill said, if they start to
> leak, you can burn though and have to start over with a new gasket.
>
> Pi-Eyed Piper wrote:
>
>> could be...I retourqued them a week later but who knows....If thats all
>> it is, awesome.
>>
>>
>> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
>> news:42643FB3.19F6E2DD@***.net...
>>
>>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>>header bolts after hot and again each week until they no long snug up.
>>>You may need a new gasket now.
>>> Bearing noise we will change pitch with RPM.
>>> God Bless America, ßill O|||||||O
>>>mailto:-------------------- http://www.----------.com/
>>>
>>>Pi-Eyed Piper wrote:
>>>
>>>>I'll try that....I just dont want it to be engine noise, I wanted
>>>>another
>>>>year before I heard any of that...
>>
>>
#39
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
not the header, checked lastnight....theres about 20 degrees of turn in the
timing chain....gonna give that a try.
"RoyJ" <spamless@microsoft.net> wrote in message
news:sj99e.8870$An2.2619@newsread2.news.pas.earthl ink.net...
> You need to retorque them 3 or 4 times. As Bill said, if they start to
> leak, you can burn though and have to start over with a new gasket.
>
> Pi-Eyed Piper wrote:
>
>> could be...I retourqued them a week later but who knows....If thats all
>> it is, awesome.
>>
>>
>> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
>> news:42643FB3.19F6E2DD@***.net...
>>
>>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>>header bolts after hot and again each week until they no long snug up.
>>>You may need a new gasket now.
>>> Bearing noise we will change pitch with RPM.
>>> God Bless America, ßill O|||||||O
>>>mailto:-------------------- http://www.----------.com/
>>>
>>>Pi-Eyed Piper wrote:
>>>
>>>>I'll try that....I just dont want it to be engine noise, I wanted
>>>>another
>>>>year before I heard any of that...
>>
>>
timing chain....gonna give that a try.
"RoyJ" <spamless@microsoft.net> wrote in message
news:sj99e.8870$An2.2619@newsread2.news.pas.earthl ink.net...
> You need to retorque them 3 or 4 times. As Bill said, if they start to
> leak, you can burn though and have to start over with a new gasket.
>
> Pi-Eyed Piper wrote:
>
>> could be...I retourqued them a week later but who knows....If thats all
>> it is, awesome.
>>
>>
>> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
>> news:42643FB3.19F6E2DD@***.net...
>>
>>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>>header bolts after hot and again each week until they no long snug up.
>>>You may need a new gasket now.
>>> Bearing noise we will change pitch with RPM.
>>> God Bless America, ßill O|||||||O
>>>mailto:-------------------- http://www.----------.com/
>>>
>>>Pi-Eyed Piper wrote:
>>>
>>>>I'll try that....I just dont want it to be engine noise, I wanted
>>>>another
>>>>year before I heard any of that...
>>
>>
#40
Guest
Posts: n/a
Re: strange enginr "rattle" timing chain?
not the header, checked lastnight....theres about 20 degrees of turn in the
timing chain....gonna give that a try.
"RoyJ" <spamless@microsoft.net> wrote in message
news:sj99e.8870$An2.2619@newsread2.news.pas.earthl ink.net...
> You need to retorque them 3 or 4 times. As Bill said, if they start to
> leak, you can burn though and have to start over with a new gasket.
>
> Pi-Eyed Piper wrote:
>
>> could be...I retourqued them a week later but who knows....If thats all
>> it is, awesome.
>>
>>
>> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
>> news:42643FB3.19F6E2DD@***.net...
>>
>>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>>header bolts after hot and again each week until they no long snug up.
>>>You may need a new gasket now.
>>> Bearing noise we will change pitch with RPM.
>>> God Bless America, ßill O|||||||O
>>>mailto:-------------------- http://www.----------.com/
>>>
>>>Pi-Eyed Piper wrote:
>>>
>>>>I'll try that....I just dont want it to be engine noise, I wanted
>>>>another
>>>>year before I heard any of that...
>>
>>
timing chain....gonna give that a try.
"RoyJ" <spamless@microsoft.net> wrote in message
news:sj99e.8870$An2.2619@newsread2.news.pas.earthl ink.net...
> You need to retorque them 3 or 4 times. As Bill said, if they start to
> leak, you can burn though and have to start over with a new gasket.
>
> Pi-Eyed Piper wrote:
>
>> could be...I retourqued them a week later but who knows....If thats all
>> it is, awesome.
>>
>>
>> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
>> news:42643FB3.19F6E2DD@***.net...
>>
>>> I'll put my money on Doug's suggestion, you forgot to retorque the
>>>header bolts after hot and again each week until they no long snug up.
>>>You may need a new gasket now.
>>> Bearing noise we will change pitch with RPM.
>>> God Bless America, ßill O|||||||O
>>>mailto:-------------------- http://www.----------.com/
>>>
>>>Pi-Eyed Piper wrote:
>>>
>>>>I'll try that....I just dont want it to be engine noise, I wanted
>>>>another
>>>>year before I heard any of that...
>>
>>