Fred W.

Thanks guys!! I'll give it a go. I'm not sure why I didn't see those when
I was looking for an adjustment before...

-Fred W.


"TJim" <jim@ranlet.nospam.com> wrote in message
news:eOWdnZbxV4UWdAaiRVn-iQ@comcast.com...
> Try just one washer on the steering stop on the opposite side of the
rubbing
> tire. If it's just barely rubbing, one 1/2 inch flat washer should be
> sufficient.
>
> --
> Jim
> --
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
> "You can do any job in the world with the wrong tool if you try hard
> enough..."
> "4x4" in caps is "$X$"
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:FVQmb.30507$iq3.8392@okepread01...
> > Fred W. did pass the time by typing:
> > > How do you adjust the limit for the steering angle on a stock '98 TJ?
> > >
> > > I bought this Jeep with what I believe are stock 30" tires and alloy
> wheels,
> > > but the inside of the right (passenger) side tire rubs on the bottom
of
> the
> > > stabilizer bar link. Actually it hits the head of the T55 torq-head
> bolt
> > > that fastens the bottom of the stabilizer bar link to the axle
housing.
> It
> > > just barely rubs at full steering lock and has not damaged the tire
> (yet)
> > > but I want to stop the rubbing for obvious reasons. The left side
comes
> > > close but does not interfere. I'm thinking I can limit the steering
by
> half
> > > a degree and will eliminate the problem.
> >
> > Add a couple of washers to the steering stops.
> > http://www.imajeep.com/Steering_Stop...ering_stop.htm
> >
> > --
> > DougW
> >
> >
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 10/10/2003

Fred W.

Thanks guys!! I'll give it a go. I'm not sure why I didn't see those when
I was looking for an adjustment before...

-Fred W.


"TJim" <jim@ranlet.nospam.com> wrote in message
news:eOWdnZbxV4UWdAaiRVn-iQ@comcast.com...
> Try just one washer on the steering stop on the opposite side of the
rubbing
> tire. If it's just barely rubbing, one 1/2 inch flat washer should be
> sufficient.
>
> --
> Jim
> --
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
> "You can do any job in the world with the wrong tool if you try hard
> enough..."
> "4x4" in caps is "$X$"
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:FVQmb.30507$iq3.8392@okepread01...
> > Fred W. did pass the time by typing:
> > > How do you adjust the limit for the steering angle on a stock '98 TJ?
> > >
> > > I bought this Jeep with what I believe are stock 30" tires and alloy
> wheels,
> > > but the inside of the right (passenger) side tire rubs on the bottom
of
> the
> > > stabilizer bar link. Actually it hits the head of the T55 torq-head
> bolt
> > > that fastens the bottom of the stabilizer bar link to the axle
housing.
> It
> > > just barely rubs at full steering lock and has not damaged the tire
> (yet)
> > > but I want to stop the rubbing for obvious reasons. The left side
comes
> > > close but does not interfere. I'm thinking I can limit the steering
by
> half
> > > a degree and will eliminate the problem.
> >
> > Add a couple of washers to the steering stops.
> > http://www.imajeep.com/Steering_Stop...ering_stop.htm
> >
> > --
> > DougW
> >
> >
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 10/10/2003

Fred W.

Thanks guys!! I'll give it a go. I'm not sure why I didn't see those when
I was looking for an adjustment before...

-Fred W.


"TJim" <jim@ranlet.nospam.com> wrote in message
news:eOWdnZbxV4UWdAaiRVn-iQ@comcast.com...
> Try just one washer on the steering stop on the opposite side of the
rubbing
> tire. If it's just barely rubbing, one 1/2 inch flat washer should be
> sufficient.
>
> --
> Jim
> --
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
> "You can do any job in the world with the wrong tool if you try hard
> enough..."
> "4x4" in caps is "$X$"
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:FVQmb.30507$iq3.8392@okepread01...
> > Fred W. did pass the time by typing:
> > > How do you adjust the limit for the steering angle on a stock '98 TJ?
> > >
> > > I bought this Jeep with what I believe are stock 30" tires and alloy
> wheels,
> > > but the inside of the right (passenger) side tire rubs on the bottom
of
> the
> > > stabilizer bar link. Actually it hits the head of the T55 torq-head
> bolt
> > > that fastens the bottom of the stabilizer bar link to the axle
housing.
> It
> > > just barely rubs at full steering lock and has not damaged the tire
> (yet)
> > > but I want to stop the rubbing for obvious reasons. The left side
comes
> > > close but does not interfere. I'm thinking I can limit the steering
by
> half
> > > a degree and will eliminate the problem.
> >
> > Add a couple of washers to the steering stops.
> > http://www.imajeep.com/Steering_Stop...ering_stop.htm
> >
> > --
> > DougW
> >
> >
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 10/10/2003

DougW

Fred W. did pass the time by typing:
> Thanks guys!! I'll give it a go. I'm not sure why I didn't see those when
> I was looking for an adjustment before...

Those are tricky. They hide if they hear you coming.

DougW

Fred W. did pass the time by typing:
> Thanks guys!! I'll give it a go. I'm not sure why I didn't see those when
> I was looking for an adjustment before...

Those are tricky. They hide if they hear you coming.

DougW

Fred W. did pass the time by typing:
> Thanks guys!! I'll give it a go. I'm not sure why I didn't see those when
> I was looking for an adjustment before...

Those are tricky. They hide if they hear you coming.

Fred W.

"DougW" <post.replies@invalid.address> wrote in message
news:e0hnb.33212$iq3.20588@okepread01...
> Fred W. did pass the time by typing:
> > Thanks guys!! I'll give it a go. I'm not sure why I didn't see those
when
> > I was looking for an adjustment before...
>
> Those are tricky. They hide if they hear you coming.
>

Well I managed to sneak up on them and caught them right where you said
they'd be!!

One washer added to each side and I'm rub free! Since I was only using one,
I decided to go with a lockwasher. Now that bolt will never come loose on
its own. That and I just happened to have the right size lockwashers
hanging around... Thanks for the tip!!

-Fred W


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 10/9/2003

Fred W.

"DougW" <post.replies@invalid.address> wrote in message
news:e0hnb.33212$iq3.20588@okepread01...
> Fred W. did pass the time by typing:
> > Thanks guys!! I'll give it a go. I'm not sure why I didn't see those
when
> > I was looking for an adjustment before...
>
> Those are tricky. They hide if they hear you coming.
>

Well I managed to sneak up on them and caught them right where you said
they'd be!!

One washer added to each side and I'm rub free! Since I was only using one,
I decided to go with a lockwasher. Now that bolt will never come loose on
its own. That and I just happened to have the right size lockwashers
hanging around... Thanks for the tip!!

-Fred W


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 10/9/2003

Fred W.

"DougW" <post.replies@invalid.address> wrote in message
news:e0hnb.33212$iq3.20588@okepread01...
> Fred W. did pass the time by typing:
> > Thanks guys!! I'll give it a go. I'm not sure why I didn't see those
when
> > I was looking for an adjustment before...
>
> Those are tricky. They hide if they hear you coming.
>

Well I managed to sneak up on them and caught them right where you said
they'd be!!

One washer added to each side and I'm rub free! Since I was only using one,
I decided to go with a lockwasher. Now that bolt will never come loose on
its own. That and I just happened to have the right size lockwashers
hanging around... Thanks for the tip!!

-Fred W


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 10/9/2003

DougW

Fred W. did pass the time by typing:

> Well I managed to sneak up on them and caught them right where you said
> they'd be!!
>
> One washer added to each side and I'm rub free! Since I was only using one,
> I decided to go with a lockwasher. Now that bolt will never come loose on
> its own. That and I just happened to have the right size lockwashers
> hanging around... Thanks for the tip!!

not a problem. I owe it to the rest of ramjw. Lot of good knowledge to be
had here.