Steering Dampner Replacement
#11
Guest
Posts: n/a
Re: Steering Dampner Replacement
I'm going have to get me one of those, I usually have to chain my
claws together.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> One of these will do the job.
> http://www.sjdiscounttools.com/ap7828.html
>
> Spray a bit of PB Blaster on the bolt, then tighten the tool up.
> Soon as you get it snug, give the bolt a light tap with a mallet
> then tighten again, tap, tap, tap, tighten, tap, tap.
>
> The bolt will pop free after a few tries. If you just crank
> on the bolt it can slip off.
claws together.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> One of these will do the job.
> http://www.sjdiscounttools.com/ap7828.html
>
> Spray a bit of PB Blaster on the bolt, then tighten the tool up.
> Soon as you get it snug, give the bolt a light tap with a mallet
> then tighten again, tap, tap, tap, tighten, tap, tap.
>
> The bolt will pop free after a few tries. If you just crank
> on the bolt it can slip off.
#12
Guest
Posts: n/a
Re: Steering Dampner Replacement
I'm going have to get me one of those, I usually have to chain my
claws together.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> One of these will do the job.
> http://www.sjdiscounttools.com/ap7828.html
>
> Spray a bit of PB Blaster on the bolt, then tighten the tool up.
> Soon as you get it snug, give the bolt a light tap with a mallet
> then tighten again, tap, tap, tap, tighten, tap, tap.
>
> The bolt will pop free after a few tries. If you just crank
> on the bolt it can slip off.
claws together.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> One of these will do the job.
> http://www.sjdiscounttools.com/ap7828.html
>
> Spray a bit of PB Blaster on the bolt, then tighten the tool up.
> Soon as you get it snug, give the bolt a light tap with a mallet
> then tighten again, tap, tap, tap, tighten, tap, tap.
>
> The bolt will pop free after a few tries. If you just crank
> on the bolt it can slip off.
#13
Guest
Posts: n/a
Re: Steering Dampner Replacement
I'm going have to get me one of those, I usually have to chain my
claws together.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> One of these will do the job.
> http://www.sjdiscounttools.com/ap7828.html
>
> Spray a bit of PB Blaster on the bolt, then tighten the tool up.
> Soon as you get it snug, give the bolt a light tap with a mallet
> then tighten again, tap, tap, tap, tighten, tap, tap.
>
> The bolt will pop free after a few tries. If you just crank
> on the bolt it can slip off.
claws together.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> One of these will do the job.
> http://www.sjdiscounttools.com/ap7828.html
>
> Spray a bit of PB Blaster on the bolt, then tighten the tool up.
> Soon as you get it snug, give the bolt a light tap with a mallet
> then tighten again, tap, tap, tap, tighten, tap, tap.
>
> The bolt will pop free after a few tries. If you just crank
> on the bolt it can slip off.
#14
Guest
Posts: n/a
Re: Steering Dampner Replacement
i use a pitman arm puller to pop it off
DanFXR wrote:
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck. Any
> ideas? Anyone use a inpact gun on this,or try to break the nut from behind?
> Thanks
DanFXR wrote:
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck. Any
> ideas? Anyone use a inpact gun on this,or try to break the nut from behind?
> Thanks
#15
Guest
Posts: n/a
Re: Steering Dampner Replacement
i use a pitman arm puller to pop it off
DanFXR wrote:
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck. Any
> ideas? Anyone use a inpact gun on this,or try to break the nut from behind?
> Thanks
DanFXR wrote:
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck. Any
> ideas? Anyone use a inpact gun on this,or try to break the nut from behind?
> Thanks
#16
Guest
Posts: n/a
Re: Steering Dampner Replacement
i use a pitman arm puller to pop it off
DanFXR wrote:
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck. Any
> ideas? Anyone use a inpact gun on this,or try to break the nut from behind?
> Thanks
DanFXR wrote:
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck. Any
> ideas? Anyone use a inpact gun on this,or try to break the nut from behind?
> Thanks
#17
Guest
Posts: n/a
Re: Steering Dampner Replacement
Thanks for your help but it looks like I will have to remove the linkage. I
have soaked it in oil,tapped it and tried a puller ,it wont move.
"DanFXR" <DanFxr@optonline.net> wrote in message
news:6pwaf.8187$ex4.3019@fe08.lga...
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck.
> Any ideas? Anyone use a inpact gun on this,or try to break the nut from
> behind?
> Thanks
>
have soaked it in oil,tapped it and tried a puller ,it wont move.
"DanFXR" <DanFxr@optonline.net> wrote in message
news:6pwaf.8187$ex4.3019@fe08.lga...
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck.
> Any ideas? Anyone use a inpact gun on this,or try to break the nut from
> behind?
> Thanks
>
#18
Guest
Posts: n/a
Re: Steering Dampner Replacement
Thanks for your help but it looks like I will have to remove the linkage. I
have soaked it in oil,tapped it and tried a puller ,it wont move.
"DanFXR" <DanFxr@optonline.net> wrote in message
news:6pwaf.8187$ex4.3019@fe08.lga...
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck.
> Any ideas? Anyone use a inpact gun on this,or try to break the nut from
> behind?
> Thanks
>
have soaked it in oil,tapped it and tried a puller ,it wont move.
"DanFXR" <DanFxr@optonline.net> wrote in message
news:6pwaf.8187$ex4.3019@fe08.lga...
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck.
> Any ideas? Anyone use a inpact gun on this,or try to break the nut from
> behind?
> Thanks
>
#19
Guest
Posts: n/a
Re: Steering Dampner Replacement
Thanks for your help but it looks like I will have to remove the linkage. I
have soaked it in oil,tapped it and tried a puller ,it wont move.
"DanFXR" <DanFxr@optonline.net> wrote in message
news:6pwaf.8187$ex4.3019@fe08.lga...
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck.
> Any ideas? Anyone use a inpact gun on this,or try to break the nut from
> behind?
> Thanks
>
have soaked it in oil,tapped it and tried a puller ,it wont move.
"DanFXR" <DanFxr@optonline.net> wrote in message
news:6pwaf.8187$ex4.3019@fe08.lga...
> 2000 Cherokee Sport,4L 95,000 miles.
>
> I am in the process of replaceing shocks and steering dampner. I was able
> to get the front shocks off(frozen,rusted bolts).
> The dampner to draglink nut came off but the bolt to the axle is stuck.
> Any ideas? Anyone use a inpact gun on this,or try to break the nut from
> behind?
> Thanks
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)