Speedo gear, which one?
06-04-2004, 08:59 AM
#1
Guest
Posts: n/a
Speedo gear, which one?
Hi All,
I have searching all over the net and understand that I would need a
27-tooth gear to get my speedo back to reading correctly. I have 3.07
gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
dia. Armed with this, I went to the dealer to get part no: 52067627, which
according to the dealer does not exist. The guy was really helpful and we
spent about 30 minutes trying to find all the combinations.
Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
because of the L, I have a feeling that this would be the long shaft part
whereas TJs have the short shaft gears.
After searching again, somebody suggested that Mopar part no: 52068149
actually supersedes 52067627. This should be a 27-tooth speedo gear. I
think again this would be a long shaft one.
Can somebody knowledgeable explain to me whether my assumptions are right
and the part number 52068149 would be a 27-tooth gear. Secondly, can I
just pull the long metal shaft out of the plastic gear and insert the short
metal shaft? Or can I just cut the longer shaft to correct length to match
the short shaft? Could this work. If this can work, then I can probably
get the part from the dealer and make it work rather than import it from
the US and pay relatively huge shipping for a cheap part.
Thanks Jeoples, you have guys/gals have been very helpful in the past.
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
I have searching all over the net and understand that I would need a
27-tooth gear to get my speedo back to reading correctly. I have 3.07
gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
dia. Armed with this, I went to the dealer to get part no: 52067627, which
according to the dealer does not exist. The guy was really helpful and we
spent about 30 minutes trying to find all the combinations.
Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
because of the L, I have a feeling that this would be the long shaft part
whereas TJs have the short shaft gears.
After searching again, somebody suggested that Mopar part no: 52068149
actually supersedes 52067627. This should be a 27-tooth speedo gear. I
think again this would be a long shaft one.
Can somebody knowledgeable explain to me whether my assumptions are right
and the part number 52068149 would be a 27-tooth gear. Secondly, can I
just pull the long metal shaft out of the plastic gear and insert the short
metal shaft? Or can I just cut the longer shaft to correct length to match
the short shaft? Could this work. If this can work, then I can probably
get the part from the dealer and make it work rather than import it from
the US and pay relatively huge shipping for a cheap part.
Thanks Jeoples, you have guys/gals have been very helpful in the past.
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
06-04-2004, 10:45 AM
#2
Guest
Posts: n/a
Re: Speedo gear, which one?
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9ps1m$7bn$1@news.wave.co.nz...
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627,
which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the
short
> metal shaft? Or can I just cut the longer shaft to correct length to
match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
Try these links:
http://www.iaxs.net/~leif/LPsJeepTJ/...hor-SpeedoGear
http://www.sierrajeep.com/speedome.htm
http://www.nagca.com/grandtech/speedometerregearing.htm
http://www.off-road.com/jeep/cheroke...do/speedo.html
http://www.jeepsunlimited.com/module...article&sid=28
06-04-2004, 10:45 AM
#3
Guest
Posts: n/a
Re: Speedo gear, which one?
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9ps1m$7bn$1@news.wave.co.nz...
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627,
which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the
short
> metal shaft? Or can I just cut the longer shaft to correct length to
match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
Try these links:
http://www.iaxs.net/~leif/LPsJeepTJ/...hor-SpeedoGear
http://www.sierrajeep.com/speedome.htm
http://www.nagca.com/grandtech/speedometerregearing.htm
http://www.off-road.com/jeep/cheroke...do/speedo.html
http://www.jeepsunlimited.com/module...article&sid=28
06-04-2004, 10:45 AM
#4
Guest
Posts: n/a
Re: Speedo gear, which one?
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9ps1m$7bn$1@news.wave.co.nz...
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627,
which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the
short
> metal shaft? Or can I just cut the longer shaft to correct length to
match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
Try these links:
http://www.iaxs.net/~leif/LPsJeepTJ/...hor-SpeedoGear
http://www.sierrajeep.com/speedome.htm
http://www.nagca.com/grandtech/speedometerregearing.htm
http://www.off-road.com/jeep/cheroke...do/speedo.html
http://www.jeepsunlimited.com/module...article&sid=28
06-04-2004, 10:45 AM
#5
Guest
Posts: n/a
Re: Speedo gear, which one?
"TW" <a t t w @ w a v e . c o . n z> wrote in message
news:c9ps1m$7bn$1@news.wave.co.nz...
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627,
which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the
short
> metal shaft? Or can I just cut the longer shaft to correct length to
match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
Try these links:
http://www.iaxs.net/~leif/LPsJeepTJ/...hor-SpeedoGear
http://www.sierrajeep.com/speedome.htm
http://www.nagca.com/grandtech/speedometerregearing.htm
http://www.off-road.com/jeep/cheroke...do/speedo.html
http://www.jeepsunlimited.com/module...article&sid=28
06-04-2004, 02:50 PM
#6
Guest
Posts: n/a
Re: Speedo gear, which one?
That should tell ya somethin': http://www.oly4x4.com/gearratios.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627, which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the short
> metal shaft? Or can I just cut the longer shaft to correct length to match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627, which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the short
> metal shaft? Or can I just cut the longer shaft to correct length to match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
06-04-2004, 02:50 PM
#7
Guest
Posts: n/a
Re: Speedo gear, which one?
That should tell ya somethin': http://www.oly4x4.com/gearratios.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627, which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the short
> metal shaft? Or can I just cut the longer shaft to correct length to match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627, which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the short
> metal shaft? Or can I just cut the longer shaft to correct length to match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
06-04-2004, 02:50 PM
#8
Guest
Posts: n/a
Re: Speedo gear, which one?
That should tell ya somethin': http://www.oly4x4.com/gearratios.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627, which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the short
> metal shaft? Or can I just cut the longer shaft to correct length to match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627, which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the short
> metal shaft? Or can I just cut the longer shaft to correct length to match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
06-04-2004, 02:50 PM
#9
Guest
Posts: n/a
Re: Speedo gear, which one?
That should tell ya somethin': http://www.oly4x4.com/gearratios.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627, which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the short
> metal shaft? Or can I just cut the longer shaft to correct length to match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TW wrote:
>
> Hi All,
>
> I have searching all over the net and understand that I would need a
> 27-tooth gear to get my speedo back to reading correctly. I have 3.07
> gearing and am running 265/75R16 tyres, which equate to about 31.7 inches
> dia. Armed with this, I went to the dealer to get part no: 52067627, which
> according to the dealer does not exist. The guy was really helpful and we
> spent about 30 minutes trying to find all the combinations.
>
> Then I came across Tomken, they have a 27-tooth gear, part no: SG27L. Now
> because of the L, I have a feeling that this would be the long shaft part
> whereas TJs have the short shaft gears.
>
> After searching again, somebody suggested that Mopar part no: 52068149
> actually supersedes 52067627. This should be a 27-tooth speedo gear. I
> think again this would be a long shaft one.
>
> Can somebody knowledgeable explain to me whether my assumptions are right
> and the part number 52068149 would be a 27-tooth gear. Secondly, can I
> just pull the long metal shaft out of the plastic gear and insert the short
> metal shaft? Or can I just cut the longer shaft to correct length to match
> the short shaft? Could this work. If this can work, then I can probably
> get the part from the dealer and make it work rather than import it from
> the US and pay relatively huge shipping for a cheap part.
>
> Thanks Jeoples, you have guys/gals have been very helpful in the past.
>
> --
> 01 TJ Renegade 4.0L Auto
> D30/44, 265/75R16 BFG Muds
06-04-2004, 05:39 PM
#10
Guest
Posts: n/a
Re: Speedo gear, which one?
Thanks for the info. It does confirm that I'll need 27-tooth short shaft
gear, which is great. But its not a dealership part and Teraflex or Tomken
don't have dealers in New Zealand. Somebody suggested that the dealer
might have a 27-tooth long shaft gear. My question is, can I interchange
the shafts between the one I have and the new one that I buy so that I have
a working 27-tooth short shaft?
I have left messages with Teraflex and their retailers in the US, but
nobody has come back to me whether they could ship it here. I know
shipping would be a lot more that the actual part.
Thanks
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c9q1ud01rkr@enews4.newsguy.com...
>
>
> Try these links:
>
> http://www.iaxs.net/~leif/LPsJeepTJ/...hor-SpeedoGear
>
> http://www.sierrajeep.com/speedome.htm
>
> http://www.nagca.com/grandtech/speedometerregearing.htm
>
> http://www.off-road.com/jeep/cheroke...do/speedo.html
>
> http://www.jeepsunlimited.com/module...article&sid=28
>
>
gear, which is great. But its not a dealership part and Teraflex or Tomken
don't have dealers in New Zealand. Somebody suggested that the dealer
might have a 27-tooth long shaft gear. My question is, can I interchange
the shafts between the one I have and the new one that I buy so that I have
a working 27-tooth short shaft?
I have left messages with Teraflex and their retailers in the US, but
nobody has come back to me whether they could ship it here. I know
shipping would be a lot more that the actual part.
Thanks
TW
--
01 TJ Renegade 4.0L Auto
D30/44, 265/75R16 BFG Muds
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c9q1ud01rkr@enews4.newsguy.com...
>
>
> Try these links:
>
> http://www.iaxs.net/~leif/LPsJeepTJ/...hor-SpeedoGear
>
> http://www.sierrajeep.com/speedome.htm
>
> http://www.nagca.com/grandtech/speedometerregearing.htm
>
> http://www.off-road.com/jeep/cheroke...do/speedo.html
>
> http://www.jeepsunlimited.com/module...article&sid=28
>
>