Speaking of wheels....
 

Hey Guys,
I'm also looking for some new wheels for my Scrambler. I have aluminum
American Racing's on now, with 33 X 12.50's. My Jeep is Black, with silver
lettering and tonneau cover. The AR's are silver (an older style, i'm not sure
what series/name). I'm going up to 35's, and some new wheels would be good. I
want to switch to steel wheels for off-road durability. Short of taking some
wheels to the powdercoating shop, has anyone seen steel wheels availible in
anything besides white and black? White would look very out of place, and
black would be too much black on this Jeep.
I'm going to keep looking in the classifieds and eBay for some steel wheels,
my local shop cuts me good deals on coatings.

Thanks in advance,
Don W

Re: Speaking of wheels....
 

What about the old standby Chrome? I know their out there.
I'm looking for a set myself. Cragar some in chrome but I'm
not sure about the quality of Cragars these days just because
of the cheap prices I see people asking for them. Was a time
that a set of Cragars were the ---- but now I don't know. Now
that I checked again maybe it's the painted wheels that are
cheap. check out this item on ebay: Item number: 2472967836

L8r - Jersey


"Don Wallish" <quicktruck@aol.comnospam> wrote in message
news:20040414171941.12524.00000276@mb-m26.aol.com...
> Hey Guys,
> I'm also looking for some new wheels for my Scrambler. I have aluminum
> American Racing's on now, with 33 X 12.50's. My Jeep is Black, with
silver
> lettering and tonneau cover. The AR's are silver (an older style, i'm not
sure
> what series/name). I'm going up to 35's, and some new wheels would be
good. I
> want to switch to steel wheels for off-road durability. Short of taking
some
> wheels to the powdercoating shop, has anyone seen steel wheels availible
in
> anything besides white and black? White would look very out of place, and
> black would be too much black on this Jeep.
> I'm going to keep looking in the classifieds and eBay for some steel
wheels,
> my local shop cuts me good deals on coatings.
>
> Thanks in advance,
> Don W
>

Re: Speaking of wheels....
 

What about the old standby Chrome? I know their out there.
I'm looking for a set myself. Cragar some in chrome but I'm
not sure about the quality of Cragars these days just because
of the cheap prices I see people asking for them. Was a time
that a set of Cragars were the ---- but now I don't know. Now
that I checked again maybe it's the painted wheels that are
cheap. check out this item on ebay: Item number: 2472967836

L8r - Jersey


"Don Wallish" <quicktruck@aol.comnospam> wrote in message
news:20040414171941.12524.00000276@mb-m26.aol.com...
> Hey Guys,
> I'm also looking for some new wheels for my Scrambler. I have aluminum
> American Racing's on now, with 33 X 12.50's. My Jeep is Black, with
silver
> lettering and tonneau cover. The AR's are silver (an older style, i'm not
sure
> what series/name). I'm going up to 35's, and some new wheels would be
good. I
> want to switch to steel wheels for off-road durability. Short of taking
some
> wheels to the powdercoating shop, has anyone seen steel wheels availible
in
> anything besides white and black? White would look very out of place, and
> black would be too much black on this Jeep.
> I'm going to keep looking in the classifieds and eBay for some steel
wheels,
> my local shop cuts me good deals on coatings.
>
> Thanks in advance,
> Don W
>

Re: Speaking of wheels....
 

What about the old standby Chrome? I know their out there.
I'm looking for a set myself. Cragar some in chrome but I'm
not sure about the quality of Cragars these days just because
of the cheap prices I see people asking for them. Was a time
that a set of Cragars were the ---- but now I don't know. Now
that I checked again maybe it's the painted wheels that are
cheap. check out this item on ebay: Item number: 2472967836

L8r - Jersey


"Don Wallish" <quicktruck@aol.comnospam> wrote in message
news:20040414171941.12524.00000276@mb-m26.aol.com...
> Hey Guys,
> I'm also looking for some new wheels for my Scrambler. I have aluminum
> American Racing's on now, with 33 X 12.50's. My Jeep is Black, with
silver
> lettering and tonneau cover. The AR's are silver (an older style, i'm not
sure
> what series/name). I'm going up to 35's, and some new wheels would be
good. I
> want to switch to steel wheels for off-road durability. Short of taking
some
> wheels to the powdercoating shop, has anyone seen steel wheels availible
in
> anything besides white and black? White would look very out of place, and
> black would be too much black on this Jeep.
> I'm going to keep looking in the classifieds and eBay for some steel
wheels,
> my local shop cuts me good deals on coatings.
>
> Thanks in advance,
> Don W
>

Re: Speaking of wheels....
 

What about the old standby Chrome? I know their out there.
I'm looking for a set myself. Cragar some in chrome but I'm
not sure about the quality of Cragars these days just because
of the cheap prices I see people asking for them. Was a time
that a set of Cragars were the ---- but now I don't know. Now
that I checked again maybe it's the painted wheels that are
cheap. check out this item on ebay: Item number: 2472967836

L8r - Jersey


"Don Wallish" <quicktruck@aol.comnospam> wrote in message
news:20040414171941.12524.00000276@mb-m26.aol.com...
> Hey Guys,
> I'm also looking for some new wheels for my Scrambler. I have aluminum
> American Racing's on now, with 33 X 12.50's. My Jeep is Black, with
silver
> lettering and tonneau cover. The AR's are silver (an older style, i'm not
sure
> what series/name). I'm going up to 35's, and some new wheels would be
good. I
> want to switch to steel wheels for off-road durability. Short of taking
some
> wheels to the powdercoating shop, has anyone seen steel wheels availible
in
> anything besides white and black? White would look very out of place, and
> black would be too much black on this Jeep.
> I'm going to keep looking in the classifieds and eBay for some steel
wheels,
> my local shop cuts me good deals on coatings.
>
> Thanks in advance,
> Don W
>

Re: Speaking of wheels....
 

chrome chips and flakes last i checked...


"Jersey" <IamHellbound@comcast.net> wrote in message
news:O7CdndgoR5VMJ-DdRVn-hw@comcast.com...
> What about the old standby Chrome? I know their out there.
> I'm looking for a set myself. Cragar some in chrome but I'm
> not sure about the quality of Cragars these days just because
> of the cheap prices I see people asking for them. Was a time
> that a set of Cragars were the ---- but now I don't know. Now
> that I checked again maybe it's the painted wheels that are
> cheap. check out this item on ebay: Item number: 2472967836
>
> L8r - Jersey
>
>
> "Don Wallish" <quicktruck@aol.comnospam> wrote in message
> news:20040414171941.12524.00000276@mb-m26.aol.com...
> > Hey Guys,
> > I'm also looking for some new wheels for my Scrambler. I have
aluminum
> > American Racing's on now, with 33 X 12.50's. My Jeep is Black, with
> silver
> > lettering and tonneau cover. The AR's are silver (an older style, i'm
not
> sure
> > what series/name). I'm going up to 35's, and some new wheels would be
> good. I
> > want to switch to steel wheels for off-road durability. Short of taking
> some
> > wheels to the powdercoating shop, has anyone seen steel wheels
availible
> in
> > anything besides white and black? White would look very out of place,
and
> > black would be too much black on this Jeep.
> > I'm going to keep looking in the classifieds and eBay for some steel
> wheels,
> > my local shop cuts me good deals on coatings.
> >
> > Thanks in advance,
> > Don W
> >
>
>

Re: Speaking of wheels....
 

chrome chips and flakes last i checked...


"Jersey" <IamHellbound@comcast.net> wrote in message
news:O7CdndgoR5VMJ-DdRVn-hw@comcast.com...
> What about the old standby Chrome? I know their out there.
> I'm looking for a set myself. Cragar some in chrome but I'm
> not sure about the quality of Cragars these days just because
> of the cheap prices I see people asking for them. Was a time
> that a set of Cragars were the ---- but now I don't know. Now
> that I checked again maybe it's the painted wheels that are
> cheap. check out this item on ebay: Item number: 2472967836
>
> L8r - Jersey
>
>
> "Don Wallish" <quicktruck@aol.comnospam> wrote in message
> news:20040414171941.12524.00000276@mb-m26.aol.com...
> > Hey Guys,
> > I'm also looking for some new wheels for my Scrambler. I have
aluminum
> > American Racing's on now, with 33 X 12.50's. My Jeep is Black, with
> silver
> > lettering and tonneau cover. The AR's are silver (an older style, i'm
not
> sure
> > what series/name). I'm going up to 35's, and some new wheels would be
> good. I
> > want to switch to steel wheels for off-road durability. Short of taking
> some
> > wheels to the powdercoating shop, has anyone seen steel wheels
availible
> in
> > anything besides white and black? White would look very out of place,
and
> > black would be too much black on this Jeep.
> > I'm going to keep looking in the classifieds and eBay for some steel
> wheels,
> > my local shop cuts me good deals on coatings.
> >
> > Thanks in advance,
> > Don W
> >
>
>

Re: Speaking of wheels....
 

chrome chips and flakes last i checked...


"Jersey" <IamHellbound@comcast.net> wrote in message
news:O7CdndgoR5VMJ-DdRVn-hw@comcast.com...
> What about the old standby Chrome? I know their out there.
> I'm looking for a set myself. Cragar some in chrome but I'm
> not sure about the quality of Cragars these days just because
> of the cheap prices I see people asking for them. Was a time
> that a set of Cragars were the ---- but now I don't know. Now
> that I checked again maybe it's the painted wheels that are
> cheap. check out this item on ebay: Item number: 2472967836
>
> L8r - Jersey
>
>
> "Don Wallish" <quicktruck@aol.comnospam> wrote in message
> news:20040414171941.12524.00000276@mb-m26.aol.com...
> > Hey Guys,
> > I'm also looking for some new wheels for my Scrambler. I have
aluminum
> > American Racing's on now, with 33 X 12.50's. My Jeep is Black, with
> silver
> > lettering and tonneau cover. The AR's are silver (an older style, i'm
not
> sure
> > what series/name). I'm going up to 35's, and some new wheels would be
> good. I
> > want to switch to steel wheels for off-road durability. Short of taking
> some
> > wheels to the powdercoating shop, has anyone seen steel wheels
availible
> in
> > anything besides white and black? White would look very out of place,
and
> > black would be too much black on this Jeep.
> > I'm going to keep looking in the classifieds and eBay for some steel
> wheels,
> > my local shop cuts me good deals on coatings.
> >
> > Thanks in advance,
> > Don W
> >
>
>

Re: Speaking of wheels....
 

chrome chips and flakes last i checked...


"Jersey" <IamHellbound@comcast.net> wrote in message
news:O7CdndgoR5VMJ-DdRVn-hw@comcast.com...
> What about the old standby Chrome? I know their out there.
> I'm looking for a set myself. Cragar some in chrome but I'm
> not sure about the quality of Cragars these days just because
> of the cheap prices I see people asking for them. Was a time
> that a set of Cragars were the ---- but now I don't know. Now
> that I checked again maybe it's the painted wheels that are
> cheap. check out this item on ebay: Item number: 2472967836
>
> L8r - Jersey
>
>
> "Don Wallish" <quicktruck@aol.comnospam> wrote in message
> news:20040414171941.12524.00000276@mb-m26.aol.com...
> > Hey Guys,
> > I'm also looking for some new wheels for my Scrambler. I have
aluminum
> > American Racing's on now, with 33 X 12.50's. My Jeep is Black, with
> silver
> > lettering and tonneau cover. The AR's are silver (an older style, i'm
not
> sure
> > what series/name). I'm going up to 35's, and some new wheels would be
> good. I
> > want to switch to steel wheels for off-road durability. Short of taking
> some
> > wheels to the powdercoating shop, has anyone seen steel wheels
availible
> in
> > anything besides white and black? White would look very out of place,
and
> > black would be too much black on this Jeep.
> > I'm going to keep looking in the classifieds and eBay for some steel
> wheels,
> > my local shop cuts me good deals on coatings.
> >
> > Thanks in advance,
> > Don W
> >
>
>

Re: Speaking of wheels....
 

Take them out and sand them from time to time:
http://www.----------.com/jeep68sand.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

herman wrote:
>
> chrome chips and flakes last i checked...

Re: Speaking of wheels....
 

Take them out and sand them from time to time:
http://www.----------.com/jeep68sand.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

herman wrote:
>
> chrome chips and flakes last i checked...

Re: Speaking of wheels....
 

Take them out and sand them from time to time:
http://www.----------.com/jeep68sand.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

herman wrote:
>
> chrome chips and flakes last i checked...

Re: Speaking of wheels....
 

Take them out and sand them from time to time:
http://www.----------.com/jeep68sand.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

herman wrote:
>
> chrome chips and flakes last i checked...

Re: Speaking of wheels....
 

We invite you to learn more about the wonderful process of
powdercoating by visiting www.powdercoater.com and going to the FAQ
page!

Andrews Powder Coating, Inc.
www.powdercoater.com

Re: Speaking of wheels....
 

We invite you to learn more about the wonderful process of
powdercoating by visiting www.powdercoater.com and going to the FAQ
page!

Andrews Powder Coating, Inc.
www.powdercoater.com

Re: Speaking of wheels....
 

We invite you to learn more about the wonderful process of
powdercoating by visiting www.powdercoater.com and going to the FAQ
page!

Andrews Powder Coating, Inc.
www.powdercoater.com

Re: Speaking of wheels....
 

We invite you to learn more about the wonderful process of
powdercoating by visiting www.powdercoater.com and going to the FAQ
page!

Andrews Powder Coating, Inc.
www.powdercoater.com

Re: Speaking of wheels....
 

Well, anyone with the insight and good sense to quote Dr. Deming in their
marketing moves to the top of my list.

If you don't know who Dr Deming is, don't be embarassed, neither did the
heads of GM, Ford, Chrysler or AMC back in the '70's. Once the Japanese
started kicking their asses in the marketplace with high quality, low cost
products, everyone wanted to know who showed them the way. Tiurned out to be
Dr. Deming, an American that US industry had previously rejected as a total
nut....

"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
news:fdba6334.0405011811.585598f2@posting.google.c om...
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Re: Speaking of wheels....
 

Well, anyone with the insight and good sense to quote Dr. Deming in their
marketing moves to the top of my list.

If you don't know who Dr Deming is, don't be embarassed, neither did the
heads of GM, Ford, Chrysler or AMC back in the '70's. Once the Japanese
started kicking their asses in the marketplace with high quality, low cost
products, everyone wanted to know who showed them the way. Tiurned out to be
Dr. Deming, an American that US industry had previously rejected as a total
nut....

"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
news:fdba6334.0405011811.585598f2@posting.google.c om...
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Re: Speaking of wheels....
 

Well, anyone with the insight and good sense to quote Dr. Deming in their
marketing moves to the top of my list.

If you don't know who Dr Deming is, don't be embarassed, neither did the
heads of GM, Ford, Chrysler or AMC back in the '70's. Once the Japanese
started kicking their asses in the marketplace with high quality, low cost
products, everyone wanted to know who showed them the way. Tiurned out to be
Dr. Deming, an American that US industry had previously rejected as a total
nut....

"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
news:fdba6334.0405011811.585598f2@posting.google.c om...
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Re: Speaking of wheels....
 

Well, anyone with the insight and good sense to quote Dr. Deming in their
marketing moves to the top of my list.

If you don't know who Dr Deming is, don't be embarassed, neither did the
heads of GM, Ford, Chrysler or AMC back in the '70's. Once the Japanese
started kicking their asses in the marketplace with high quality, low cost
products, everyone wanted to know who showed them the way. Tiurned out to be
Dr. Deming, an American that US industry had previously rejected as a total
nut....

"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
news:fdba6334.0405011811.585598f2@posting.google.c om...
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Re: Speaking of wheels....
 

And we politely invite you to stop spamming this newsgroup.

This group 'does' have a Charter and spamming up will only get you
complaints, not business.

Our Charter is found here:

ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

"Andrews Powder Coating, Inc." wrote:
>
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Re: Speaking of wheels....
 

And we politely invite you to stop spamming this newsgroup.

This group 'does' have a Charter and spamming up will only get you
complaints, not business.

Our Charter is found here:

ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

"Andrews Powder Coating, Inc." wrote:
>
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Re: Speaking of wheels....
 

And we politely invite you to stop spamming this newsgroup.

This group 'does' have a Charter and spamming up will only get you
complaints, not business.

Our Charter is found here:

ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

"Andrews Powder Coating, Inc." wrote:
>
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Re: Speaking of wheels....
 

And we politely invite you to stop spamming this newsgroup.

This group 'does' have a Charter and spamming up will only get you
complaints, not business.

Our Charter is found here:

ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

"Andrews Powder Coating, Inc." wrote:
>
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Re: Speaking of wheels....
 

"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
news:fdba6334.0405011811.585598f2@posting.google.c om...
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Sorry, I don't do business with spammers.

Re: Speaking of wheels....
 

"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
news:fdba6334.0405011811.585598f2@posting.google.c om...
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Sorry, I don't do business with spammers.

Re: Speaking of wheels....
 

"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
news:fdba6334.0405011811.585598f2@posting.google.c om...
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Sorry, I don't do business with spammers.

Re: Speaking of wheels....
 

"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
news:fdba6334.0405011811.585598f2@posting.google.c om...
> We invite you to learn more about the wonderful process of
> powdercoating by visiting www.powdercoater.com and going to the FAQ
> page!
>
> Andrews Powder Coating, Inc.
> www.powdercoater.com

Sorry, I don't do business with spammers.

Re: Speaking of wheels....
 

In news:409470EF.E92C55A3@sympatico.ca,
Mike Romain from <romainm@sympatico.ca> was injured because:

| And we politely invite you to stop spamming this
newsgroup.
|
| This group 'does' have a Charter and spamming up will only
get
| you complaints, not business.
|
| Our Charter is found here:
|
|
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in
'00
| 88 Cherokee 235 BFG AT's
|
| "Andrews Powder Coating, Inc." wrote:
||
|| We invite you to learn more about the wonderful process
of
|| powdercoating by visiting www.powdercoater.com and going
to
|| the FAQ page!
||
|| Andrews Powder Coating, Inc.
|| www.powdercoater.com

Get some, Mike.

--
--
Joe Pribe
NC

Pull my finger to reply by email.

jpribe 'at' nc.rr.com
jegp 'at' hotmail.com

I Love My O|||||||O

Re: Speaking of wheels....
 

In news:409470EF.E92C55A3@sympatico.ca,
Mike Romain from <romainm@sympatico.ca> was injured because:

| And we politely invite you to stop spamming this
newsgroup.
|
| This group 'does' have a Charter and spamming up will only
get
| you complaints, not business.
|
| Our Charter is found here:
|
|
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in
'00
| 88 Cherokee 235 BFG AT's
|
| "Andrews Powder Coating, Inc." wrote:
||
|| We invite you to learn more about the wonderful process
of
|| powdercoating by visiting www.powdercoater.com and going
to
|| the FAQ page!
||
|| Andrews Powder Coating, Inc.
|| www.powdercoater.com

Get some, Mike.

--
--
Joe Pribe
NC

Pull my finger to reply by email.

jpribe 'at' nc.rr.com
jegp 'at' hotmail.com

I Love My O|||||||O

Re: Speaking of wheels....
 

In news:409470EF.E92C55A3@sympatico.ca,
Mike Romain from <romainm@sympatico.ca> was injured because:

| And we politely invite you to stop spamming this
newsgroup.
|
| This group 'does' have a Charter and spamming up will only
get
| you complaints, not business.
|
| Our Charter is found here:
|
|
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in
'00
| 88 Cherokee 235 BFG AT's
|
| "Andrews Powder Coating, Inc." wrote:
||
|| We invite you to learn more about the wonderful process
of
|| powdercoating by visiting www.powdercoater.com and going
to
|| the FAQ page!
||
|| Andrews Powder Coating, Inc.
|| www.powdercoater.com

Get some, Mike.

--
--
Joe Pribe
NC

Pull my finger to reply by email.

jpribe 'at' nc.rr.com
jegp 'at' hotmail.com

I Love My O|||||||O

Re: Speaking of wheels....
 

In news:409470EF.E92C55A3@sympatico.ca,
Mike Romain from <romainm@sympatico.ca> was injured because:

| And we politely invite you to stop spamming this
newsgroup.
|
| This group 'does' have a Charter and spamming up will only
get
| you complaints, not business.
|
| Our Charter is found here:
|
|
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in
'00
| 88 Cherokee 235 BFG AT's
|
| "Andrews Powder Coating, Inc." wrote:
||
|| We invite you to learn more about the wonderful process
of
|| powdercoating by visiting www.powdercoater.com and going
to
|| the FAQ page!
||
|| Andrews Powder Coating, Inc.
|| www.powdercoater.com

Get some, Mike.

--
--
Joe Pribe
NC

Pull my finger to reply by email.

jpribe 'at' nc.rr.com
jegp 'at' hotmail.com

I Love My O|||||||O

Re: Speaking of wheels....
 

On Sun, 2 May 2004 00:44:18 -0400, "Jay Stuler"
<usenetjunk2004@yahoo.com> wrote:

>
>"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
>news:fdba6334.0405011811.585598f2@posting.google. com...
>> We invite you to learn more about the wonderful process of
>> powdercoating by visiting www.powdercoater.com and going to the FAQ
>> page!
>>
>> Andrews Powder Coating, Inc.
>> www.powdercoater.com
>
>Sorry, I don't do business with spammers.
>

Whatever.
I personaly found the post polite and on topic. Didn't bother me a
bit.
I've been thinking of having some bike parts pc'd and now I've got a
lot better idea of the things I need to know and do to prep the
pieces. Also, I've been looking for more info on JetHot and it's there
too.

Of course, if he posts it 6 times in the next 36 hours, this attitude
might change<g>.


--
Old Crow
'82 Shovelhead FLT 92" 'Pearl'
'95 Jeep YJ Rio Grande
ASE Certified Master Auto Tech + L1
TOMKAT, BS#133, SENS, MAMBM, DOF#51

Re: Speaking of wheels....
 

On Sun, 2 May 2004 00:44:18 -0400, "Jay Stuler"
<usenetjunk2004@yahoo.com> wrote:

>
>"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
>news:fdba6334.0405011811.585598f2@posting.google. com...
>> We invite you to learn more about the wonderful process of
>> powdercoating by visiting www.powdercoater.com and going to the FAQ
>> page!
>>
>> Andrews Powder Coating, Inc.
>> www.powdercoater.com
>
>Sorry, I don't do business with spammers.
>

Whatever.
I personaly found the post polite and on topic. Didn't bother me a
bit.
I've been thinking of having some bike parts pc'd and now I've got a
lot better idea of the things I need to know and do to prep the
pieces. Also, I've been looking for more info on JetHot and it's there
too.

Of course, if he posts it 6 times in the next 36 hours, this attitude
might change<g>.


--
Old Crow
'82 Shovelhead FLT 92" 'Pearl'
'95 Jeep YJ Rio Grande
ASE Certified Master Auto Tech + L1
TOMKAT, BS#133, SENS, MAMBM, DOF#51

Re: Speaking of wheels....
 

On Sun, 2 May 2004 00:44:18 -0400, "Jay Stuler"
<usenetjunk2004@yahoo.com> wrote:

>
>"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
>news:fdba6334.0405011811.585598f2@posting.google. com...
>> We invite you to learn more about the wonderful process of
>> powdercoating by visiting www.powdercoater.com and going to the FAQ
>> page!
>>
>> Andrews Powder Coating, Inc.
>> www.powdercoater.com
>
>Sorry, I don't do business with spammers.
>

Whatever.
I personaly found the post polite and on topic. Didn't bother me a
bit.
I've been thinking of having some bike parts pc'd and now I've got a
lot better idea of the things I need to know and do to prep the
pieces. Also, I've been looking for more info on JetHot and it's there
too.

Of course, if he posts it 6 times in the next 36 hours, this attitude
might change<g>.


--
Old Crow
'82 Shovelhead FLT 92" 'Pearl'
'95 Jeep YJ Rio Grande
ASE Certified Master Auto Tech + L1
TOMKAT, BS#133, SENS, MAMBM, DOF#51

Re: Speaking of wheels....
 

On Sun, 2 May 2004 00:44:18 -0400, "Jay Stuler"
<usenetjunk2004@yahoo.com> wrote:

>
>"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
>news:fdba6334.0405011811.585598f2@posting.google. com...
>> We invite you to learn more about the wonderful process of
>> powdercoating by visiting www.powdercoater.com and going to the FAQ
>> page!
>>
>> Andrews Powder Coating, Inc.
>> www.powdercoater.com
>
>Sorry, I don't do business with spammers.
>

Whatever.
I personaly found the post polite and on topic. Didn't bother me a
bit.
I've been thinking of having some bike parts pc'd and now I've got a
lot better idea of the things I need to know and do to prep the
pieces. Also, I've been looking for more info on JetHot and it's there
too.

Of course, if he posts it 6 times in the next 36 hours, this attitude
might change<g>.


--
Old Crow
'82 Shovelhead FLT 92" 'Pearl'
'95 Jeep YJ Rio Grande
ASE Certified Master Auto Tech + L1
TOMKAT, BS#133, SENS, MAMBM, DOF#51

Re: Speaking of wheels....
 

"Old Crow" <walliscrow@hotmail.com> wrote in message
news:mmi9905e9uaifuhvhs7qov93drvv8b4c38@4ax.com...
> On Sun, 2 May 2004 00:44:18 -0400, "Jay Stuler"
> <usenetjunk2004@yahoo.com> wrote:
>
> >
> >"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
> >news:fdba6334.0405011811.585598f2@posting.google. com...
> >> We invite you to learn more about the wonderful process of
> >> powdercoating by visiting www.powdercoater.com and going to the FAQ
> >> page!
> >>
> >> Andrews Powder Coating, Inc.
> >> www.powdercoater.com
> >
> >Sorry, I don't do business with spammers.
> >
>
> Whatever.
> I personaly found the post polite and on topic. Didn't bother me a
> bit.
> I've been thinking of having some bike parts pc'd and now I've got a
> lot better idea of the things I need to know and do to prep the
> pieces. Also, I've been looking for more info on JetHot and it's there
> too.
>
> Of course, if he posts it 6 times in the next 36 hours, this attitude
> might change<g>.
>
>
> --
> Old Crow
> '82 Shovelhead FLT 92" 'Pearl'
> '95 Jeep YJ Rio Grande
> ASE Certified Master Auto Tech + L1
> TOMKAT, BS#133, SENS, MAMBM, DOF#51

If you've got the room and want to set up your own powdercoating system,
it's quite easy. Eastwood sells a kit and all the supplies. From there, all
you need is an old oven and an air compressor. I started with the Eastwood
unit and then got a commercial unit when I started soing it as a sideline
income. Also check out www,columbiacoatings.com. They have some neat colors,
and also have pics of a guy who powdercoated the body of his Jeep! Just
click on the customer pictures link and go to the bottom of tha page.

Chris

Re: Speaking of wheels....
 

"Old Crow" <walliscrow@hotmail.com> wrote in message
news:mmi9905e9uaifuhvhs7qov93drvv8b4c38@4ax.com...
> On Sun, 2 May 2004 00:44:18 -0400, "Jay Stuler"
> <usenetjunk2004@yahoo.com> wrote:
>
> >
> >"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
> >news:fdba6334.0405011811.585598f2@posting.google. com...
> >> We invite you to learn more about the wonderful process of
> >> powdercoating by visiting www.powdercoater.com and going to the FAQ
> >> page!
> >>
> >> Andrews Powder Coating, Inc.
> >> www.powdercoater.com
> >
> >Sorry, I don't do business with spammers.
> >
>
> Whatever.
> I personaly found the post polite and on topic. Didn't bother me a
> bit.
> I've been thinking of having some bike parts pc'd and now I've got a
> lot better idea of the things I need to know and do to prep the
> pieces. Also, I've been looking for more info on JetHot and it's there
> too.
>
> Of course, if he posts it 6 times in the next 36 hours, this attitude
> might change<g>.
>
>
> --
> Old Crow
> '82 Shovelhead FLT 92" 'Pearl'
> '95 Jeep YJ Rio Grande
> ASE Certified Master Auto Tech + L1
> TOMKAT, BS#133, SENS, MAMBM, DOF#51

If you've got the room and want to set up your own powdercoating system,
it's quite easy. Eastwood sells a kit and all the supplies. From there, all
you need is an old oven and an air compressor. I started with the Eastwood
unit and then got a commercial unit when I started soing it as a sideline
income. Also check out www,columbiacoatings.com. They have some neat colors,
and also have pics of a guy who powdercoated the body of his Jeep! Just
click on the customer pictures link and go to the bottom of tha page.

Chris

Re: Speaking of wheels....
 

"Old Crow" <walliscrow@hotmail.com> wrote in message
news:mmi9905e9uaifuhvhs7qov93drvv8b4c38@4ax.com...
> On Sun, 2 May 2004 00:44:18 -0400, "Jay Stuler"
> <usenetjunk2004@yahoo.com> wrote:
>
> >
> >"Andrews Powder Coating, Inc." <sandee@powdercoater.com> wrote in message
> >news:fdba6334.0405011811.585598f2@posting.google. com...
> >> We invite you to learn more about the wonderful process of
> >> powdercoating by visiting www.powdercoater.com and going to the FAQ
> >> page!
> >>
> >> Andrews Powder Coating, Inc.
> >> www.powdercoater.com
> >
> >Sorry, I don't do business with spammers.
> >
>
> Whatever.
> I personaly found the post polite and on topic. Didn't bother me a
> bit.
> I've been thinking of having some bike parts pc'd and now I've got a
> lot better idea of the things I need to know and do to prep the
> pieces. Also, I've been looking for more info on JetHot and it's there
> too.
>
> Of course, if he posts it 6 times in the next 36 hours, this attitude
> might change<g>.
>
>
> --
> Old Crow
> '82 Shovelhead FLT 92" 'Pearl'
> '95 Jeep YJ Rio Grande
> ASE Certified Master Auto Tech + L1
> TOMKAT, BS#133, SENS, MAMBM, DOF#51

If you've got the room and want to set up your own powdercoating system,
it's quite easy. Eastwood sells a kit and all the supplies. From there, all
you need is an old oven and an air compressor. I started with the Eastwood
unit and then got a commercial unit when I started soing it as a sideline
income. Also check out www,columbiacoatings.com. They have some neat colors,
and also have pics of a guy who powdercoated the body of his Jeep! Just
click on the customer pictures link and go to the bottom of tha page.

Chris