soft top hardware
#11
Guest
Posts: n/a
Re: soft top hardware
If you look on the windows, the name should be there. The OEM is
Whitco, which is what I have on mine. This is the one that snaps down
at the tub rim and has roll up windows.
If that is what you have, I can take photos of the rods. There is one
vertical rod and a horizontal one on each side that anchor into a metal
hoop that goes over the driver head side to side and the tub.
Mike
Deano wrote:
> I think it is the OEM set-up although likely replacement cloth. It is
> in great condition but the material around the doors flaps a bit.
>
> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> What make is the top?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Deano wrote:
>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>> support bars around the each of the door frames needed to help the
>>> doors seal up properly. Anyone have pics of these (I don't even know
>>> what they look like) or extra parts or somewhere I could find these?
>>> Any help is great.
>>> Thanks
>
Whitco, which is what I have on mine. This is the one that snaps down
at the tub rim and has roll up windows.
If that is what you have, I can take photos of the rods. There is one
vertical rod and a horizontal one on each side that anchor into a metal
hoop that goes over the driver head side to side and the tub.
Mike
Deano wrote:
> I think it is the OEM set-up although likely replacement cloth. It is
> in great condition but the material around the doors flaps a bit.
>
> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> What make is the top?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Deano wrote:
>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>> support bars around the each of the door frames needed to help the
>>> doors seal up properly. Anyone have pics of these (I don't even know
>>> what they look like) or extra parts or somewhere I could find these?
>>> Any help is great.
>>> Thanks
>
#12
Guest
Posts: n/a
Re: soft top hardware
If you look on the windows, the name should be there. The OEM is
Whitco, which is what I have on mine. This is the one that snaps down
at the tub rim and has roll up windows.
If that is what you have, I can take photos of the rods. There is one
vertical rod and a horizontal one on each side that anchor into a metal
hoop that goes over the driver head side to side and the tub.
Mike
Deano wrote:
> I think it is the OEM set-up although likely replacement cloth. It is
> in great condition but the material around the doors flaps a bit.
>
> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> What make is the top?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Deano wrote:
>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>> support bars around the each of the door frames needed to help the
>>> doors seal up properly. Anyone have pics of these (I don't even know
>>> what they look like) or extra parts or somewhere I could find these?
>>> Any help is great.
>>> Thanks
>
Whitco, which is what I have on mine. This is the one that snaps down
at the tub rim and has roll up windows.
If that is what you have, I can take photos of the rods. There is one
vertical rod and a horizontal one on each side that anchor into a metal
hoop that goes over the driver head side to side and the tub.
Mike
Deano wrote:
> I think it is the OEM set-up although likely replacement cloth. It is
> in great condition but the material around the doors flaps a bit.
>
> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> What make is the top?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Deano wrote:
>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>> support bars around the each of the door frames needed to help the
>>> doors seal up properly. Anyone have pics of these (I don't even know
>>> what they look like) or extra parts or somewhere I could find these?
>>> Any help is great.
>>> Thanks
>
#13
Guest
Posts: n/a
Re: soft top hardware
If you look on the windows, the name should be there. The OEM is
Whitco, which is what I have on mine. This is the one that snaps down
at the tub rim and has roll up windows.
If that is what you have, I can take photos of the rods. There is one
vertical rod and a horizontal one on each side that anchor into a metal
hoop that goes over the driver head side to side and the tub.
Mike
Deano wrote:
> I think it is the OEM set-up although likely replacement cloth. It is
> in great condition but the material around the doors flaps a bit.
>
> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> What make is the top?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Deano wrote:
>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>> support bars around the each of the door frames needed to help the
>>> doors seal up properly. Anyone have pics of these (I don't even know
>>> what they look like) or extra parts or somewhere I could find these?
>>> Any help is great.
>>> Thanks
>
Whitco, which is what I have on mine. This is the one that snaps down
at the tub rim and has roll up windows.
If that is what you have, I can take photos of the rods. There is one
vertical rod and a horizontal one on each side that anchor into a metal
hoop that goes over the driver head side to side and the tub.
Mike
Deano wrote:
> I think it is the OEM set-up although likely replacement cloth. It is
> in great condition but the material around the doors flaps a bit.
>
> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> What make is the top?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Deano wrote:
>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>> support bars around the each of the door frames needed to help the
>>> doors seal up properly. Anyone have pics of these (I don't even know
>>> what they look like) or extra parts or somewhere I could find these?
>>> Any help is great.
>>> Thanks
>
#14
Guest
Posts: n/a
Re: soft top hardware
That's what I have. If you have pics of the hardware, that would be
great. I haven't been able to find anyone that sells the OEM or
similar hardware.
On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
> If you look on the windows, the name should be there. The OEM is
> Whitco, which is what I have on mine. This is the one that snaps down
> at the tub rim and has roll up windows.
>
> If that is what you have, I can take photos of the rods. There is one
> vertical rod and a horizontal one on each side that anchor into a metal
> hoop that goes over the driver head side to side and the tub.
>
> Mike
>
> Deano wrote:
> > I think it is the OEM set-up although likely replacement cloth. It is
> > in great condition but the material around the doors flaps a bit.
>
> > On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> >> What make is the top?
>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> >> (More Off Road album links at bottom of the view page)
>
> >> Deano wrote:
> >>> I have a mostly complete softtop for my 86 CJ, but it is missing the
> >>> support bars around the each of the door frames needed to help the
> >>> doors seal up properly. Anyone have pics of these (I don't even know
> >>> what they look like) or extra parts or somewhere I could find these?
> >>> Any help is great.
> >>> Thanks
great. I haven't been able to find anyone that sells the OEM or
similar hardware.
On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
> If you look on the windows, the name should be there. The OEM is
> Whitco, which is what I have on mine. This is the one that snaps down
> at the tub rim and has roll up windows.
>
> If that is what you have, I can take photos of the rods. There is one
> vertical rod and a horizontal one on each side that anchor into a metal
> hoop that goes over the driver head side to side and the tub.
>
> Mike
>
> Deano wrote:
> > I think it is the OEM set-up although likely replacement cloth. It is
> > in great condition but the material around the doors flaps a bit.
>
> > On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> >> What make is the top?
>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> >> (More Off Road album links at bottom of the view page)
>
> >> Deano wrote:
> >>> I have a mostly complete softtop for my 86 CJ, but it is missing the
> >>> support bars around the each of the door frames needed to help the
> >>> doors seal up properly. Anyone have pics of these (I don't even know
> >>> what they look like) or extra parts or somewhere I could find these?
> >>> Any help is great.
> >>> Thanks
#15
Guest
Posts: n/a
Re: soft top hardware
That's what I have. If you have pics of the hardware, that would be
great. I haven't been able to find anyone that sells the OEM or
similar hardware.
On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
> If you look on the windows, the name should be there. The OEM is
> Whitco, which is what I have on mine. This is the one that snaps down
> at the tub rim and has roll up windows.
>
> If that is what you have, I can take photos of the rods. There is one
> vertical rod and a horizontal one on each side that anchor into a metal
> hoop that goes over the driver head side to side and the tub.
>
> Mike
>
> Deano wrote:
> > I think it is the OEM set-up although likely replacement cloth. It is
> > in great condition but the material around the doors flaps a bit.
>
> > On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> >> What make is the top?
>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> >> (More Off Road album links at bottom of the view page)
>
> >> Deano wrote:
> >>> I have a mostly complete softtop for my 86 CJ, but it is missing the
> >>> support bars around the each of the door frames needed to help the
> >>> doors seal up properly. Anyone have pics of these (I don't even know
> >>> what they look like) or extra parts or somewhere I could find these?
> >>> Any help is great.
> >>> Thanks
great. I haven't been able to find anyone that sells the OEM or
similar hardware.
On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
> If you look on the windows, the name should be there. The OEM is
> Whitco, which is what I have on mine. This is the one that snaps down
> at the tub rim and has roll up windows.
>
> If that is what you have, I can take photos of the rods. There is one
> vertical rod and a horizontal one on each side that anchor into a metal
> hoop that goes over the driver head side to side and the tub.
>
> Mike
>
> Deano wrote:
> > I think it is the OEM set-up although likely replacement cloth. It is
> > in great condition but the material around the doors flaps a bit.
>
> > On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> >> What make is the top?
>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> >> (More Off Road album links at bottom of the view page)
>
> >> Deano wrote:
> >>> I have a mostly complete softtop for my 86 CJ, but it is missing the
> >>> support bars around the each of the door frames needed to help the
> >>> doors seal up properly. Anyone have pics of these (I don't even know
> >>> what they look like) or extra parts or somewhere I could find these?
> >>> Any help is great.
> >>> Thanks
#16
Guest
Posts: n/a
Re: soft top hardware
That's what I have. If you have pics of the hardware, that would be
great. I haven't been able to find anyone that sells the OEM or
similar hardware.
On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
> If you look on the windows, the name should be there. The OEM is
> Whitco, which is what I have on mine. This is the one that snaps down
> at the tub rim and has roll up windows.
>
> If that is what you have, I can take photos of the rods. There is one
> vertical rod and a horizontal one on each side that anchor into a metal
> hoop that goes over the driver head side to side and the tub.
>
> Mike
>
> Deano wrote:
> > I think it is the OEM set-up although likely replacement cloth. It is
> > in great condition but the material around the doors flaps a bit.
>
> > On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> >> What make is the top?
>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> >> (More Off Road album links at bottom of the view page)
>
> >> Deano wrote:
> >>> I have a mostly complete softtop for my 86 CJ, but it is missing the
> >>> support bars around the each of the door frames needed to help the
> >>> doors seal up properly. Anyone have pics of these (I don't even know
> >>> what they look like) or extra parts or somewhere I could find these?
> >>> Any help is great.
> >>> Thanks
great. I haven't been able to find anyone that sells the OEM or
similar hardware.
On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
> If you look on the windows, the name should be there. The OEM is
> Whitco, which is what I have on mine. This is the one that snaps down
> at the tub rim and has roll up windows.
>
> If that is what you have, I can take photos of the rods. There is one
> vertical rod and a horizontal one on each side that anchor into a metal
> hoop that goes over the driver head side to side and the tub.
>
> Mike
>
> Deano wrote:
> > I think it is the OEM set-up although likely replacement cloth. It is
> > in great condition but the material around the doors flaps a bit.
>
> > On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> >> What make is the top?
>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> >> (More Off Road album links at bottom of the view page)
>
> >> Deano wrote:
> >>> I have a mostly complete softtop for my 86 CJ, but it is missing the
> >>> support bars around the each of the door frames needed to help the
> >>> doors seal up properly. Anyone have pics of these (I don't even know
> >>> what they look like) or extra parts or somewhere I could find these?
> >>> Any help is great.
> >>> Thanks
#17
Guest
Posts: n/a
Re: soft top hardware
That's what I have. If you have pics of the hardware, that would be
great. I haven't been able to find anyone that sells the OEM or
similar hardware.
On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
> If you look on the windows, the name should be there. The OEM is
> Whitco, which is what I have on mine. This is the one that snaps down
> at the tub rim and has roll up windows.
>
> If that is what you have, I can take photos of the rods. There is one
> vertical rod and a horizontal one on each side that anchor into a metal
> hoop that goes over the driver head side to side and the tub.
>
> Mike
>
> Deano wrote:
> > I think it is the OEM set-up although likely replacement cloth. It is
> > in great condition but the material around the doors flaps a bit.
>
> > On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> >> What make is the top?
>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> >> (More Off Road album links at bottom of the view page)
>
> >> Deano wrote:
> >>> I have a mostly complete softtop for my 86 CJ, but it is missing the
> >>> support bars around the each of the door frames needed to help the
> >>> doors seal up properly. Anyone have pics of these (I don't even know
> >>> what they look like) or extra parts or somewhere I could find these?
> >>> Any help is great.
> >>> Thanks
great. I haven't been able to find anyone that sells the OEM or
similar hardware.
On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
> If you look on the windows, the name should be there. The OEM is
> Whitco, which is what I have on mine. This is the one that snaps down
> at the tub rim and has roll up windows.
>
> If that is what you have, I can take photos of the rods. There is one
> vertical rod and a horizontal one on each side that anchor into a metal
> hoop that goes over the driver head side to side and the tub.
>
> Mike
>
> Deano wrote:
> > I think it is the OEM set-up although likely replacement cloth. It is
> > in great condition but the material around the doors flaps a bit.
>
> > On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> >> What make is the top?
>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> >> (More Off Road album links at bottom of the view page)
>
> >> Deano wrote:
> >>> I have a mostly complete softtop for my 86 CJ, but it is missing the
> >>> support bars around the each of the door frames needed to help the
> >>> doors seal up properly. Anyone have pics of these (I don't even know
> >>> what they look like) or extra parts or somewhere I could find these?
> >>> Any help is great.
> >>> Thanks
#18
Guest
Posts: n/a
Re: soft top hardware
I am packing up tonight for a camping trip first thing tomorrow and it
is snowing out. My hardware is tucked away in a dark garage. I will be
back Tuesday or Wednesday and get some photos with a tape measure
sitting beside things. The rods could be made up with a little creative
welding.
I will check this thread when I get back to see if someone had old
hardware to get rid of for you and then take photos or not....
Mike
Deano wrote:
> That's what I have. If you have pics of the hardware, that would be
> great. I haven't been able to find anyone that sells the OEM or
> similar hardware.
>
> On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> If you look on the windows, the name should be there. The OEM is
>> Whitco, which is what I have on mine. This is the one that snaps down
>> at the tub rim and has roll up windows.
>>
>> If that is what you have, I can take photos of the rods. There is one
>> vertical rod and a horizontal one on each side that anchor into a metal
>> hoop that goes over the driver head side to side and the tub.
>>
>> Mike
>>
>> Deano wrote:
>>> I think it is the OEM set-up although likely replacement cloth. It is
>>> in great condition but the material around the doors flaps a bit.
>>> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> What make is the top?
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>> Deano wrote:
>>>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>>>> support bars around the each of the door frames needed to help the
>>>>> doors seal up properly. Anyone have pics of these (I don't even know
>>>>> what they look like) or extra parts or somewhere I could find these?
>>>>> Any help is great.
>>>>> Thanks
>
is snowing out. My hardware is tucked away in a dark garage. I will be
back Tuesday or Wednesday and get some photos with a tape measure
sitting beside things. The rods could be made up with a little creative
welding.
I will check this thread when I get back to see if someone had old
hardware to get rid of for you and then take photos or not....
Mike
Deano wrote:
> That's what I have. If you have pics of the hardware, that would be
> great. I haven't been able to find anyone that sells the OEM or
> similar hardware.
>
> On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> If you look on the windows, the name should be there. The OEM is
>> Whitco, which is what I have on mine. This is the one that snaps down
>> at the tub rim and has roll up windows.
>>
>> If that is what you have, I can take photos of the rods. There is one
>> vertical rod and a horizontal one on each side that anchor into a metal
>> hoop that goes over the driver head side to side and the tub.
>>
>> Mike
>>
>> Deano wrote:
>>> I think it is the OEM set-up although likely replacement cloth. It is
>>> in great condition but the material around the doors flaps a bit.
>>> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> What make is the top?
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>> Deano wrote:
>>>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>>>> support bars around the each of the door frames needed to help the
>>>>> doors seal up properly. Anyone have pics of these (I don't even know
>>>>> what they look like) or extra parts or somewhere I could find these?
>>>>> Any help is great.
>>>>> Thanks
>
#19
Guest
Posts: n/a
Re: soft top hardware
I am packing up tonight for a camping trip first thing tomorrow and it
is snowing out. My hardware is tucked away in a dark garage. I will be
back Tuesday or Wednesday and get some photos with a tape measure
sitting beside things. The rods could be made up with a little creative
welding.
I will check this thread when I get back to see if someone had old
hardware to get rid of for you and then take photos or not....
Mike
Deano wrote:
> That's what I have. If you have pics of the hardware, that would be
> great. I haven't been able to find anyone that sells the OEM or
> similar hardware.
>
> On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> If you look on the windows, the name should be there. The OEM is
>> Whitco, which is what I have on mine. This is the one that snaps down
>> at the tub rim and has roll up windows.
>>
>> If that is what you have, I can take photos of the rods. There is one
>> vertical rod and a horizontal one on each side that anchor into a metal
>> hoop that goes over the driver head side to side and the tub.
>>
>> Mike
>>
>> Deano wrote:
>>> I think it is the OEM set-up although likely replacement cloth. It is
>>> in great condition but the material around the doors flaps a bit.
>>> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> What make is the top?
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>> Deano wrote:
>>>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>>>> support bars around the each of the door frames needed to help the
>>>>> doors seal up properly. Anyone have pics of these (I don't even know
>>>>> what they look like) or extra parts or somewhere I could find these?
>>>>> Any help is great.
>>>>> Thanks
>
is snowing out. My hardware is tucked away in a dark garage. I will be
back Tuesday or Wednesday and get some photos with a tape measure
sitting beside things. The rods could be made up with a little creative
welding.
I will check this thread when I get back to see if someone had old
hardware to get rid of for you and then take photos or not....
Mike
Deano wrote:
> That's what I have. If you have pics of the hardware, that would be
> great. I haven't been able to find anyone that sells the OEM or
> similar hardware.
>
> On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> If you look on the windows, the name should be there. The OEM is
>> Whitco, which is what I have on mine. This is the one that snaps down
>> at the tub rim and has roll up windows.
>>
>> If that is what you have, I can take photos of the rods. There is one
>> vertical rod and a horizontal one on each side that anchor into a metal
>> hoop that goes over the driver head side to side and the tub.
>>
>> Mike
>>
>> Deano wrote:
>>> I think it is the OEM set-up although likely replacement cloth. It is
>>> in great condition but the material around the doors flaps a bit.
>>> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> What make is the top?
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>> Deano wrote:
>>>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>>>> support bars around the each of the door frames needed to help the
>>>>> doors seal up properly. Anyone have pics of these (I don't even know
>>>>> what they look like) or extra parts or somewhere I could find these?
>>>>> Any help is great.
>>>>> Thanks
>
#20
Guest
Posts: n/a
Re: soft top hardware
I am packing up tonight for a camping trip first thing tomorrow and it
is snowing out. My hardware is tucked away in a dark garage. I will be
back Tuesday or Wednesday and get some photos with a tape measure
sitting beside things. The rods could be made up with a little creative
welding.
I will check this thread when I get back to see if someone had old
hardware to get rid of for you and then take photos or not....
Mike
Deano wrote:
> That's what I have. If you have pics of the hardware, that would be
> great. I haven't been able to find anyone that sells the OEM or
> similar hardware.
>
> On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> If you look on the windows, the name should be there. The OEM is
>> Whitco, which is what I have on mine. This is the one that snaps down
>> at the tub rim and has roll up windows.
>>
>> If that is what you have, I can take photos of the rods. There is one
>> vertical rod and a horizontal one on each side that anchor into a metal
>> hoop that goes over the driver head side to side and the tub.
>>
>> Mike
>>
>> Deano wrote:
>>> I think it is the OEM set-up although likely replacement cloth. It is
>>> in great condition but the material around the doors flaps a bit.
>>> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> What make is the top?
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>> Deano wrote:
>>>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>>>> support bars around the each of the door frames needed to help the
>>>>> doors seal up properly. Anyone have pics of these (I don't even know
>>>>> what they look like) or extra parts or somewhere I could find these?
>>>>> Any help is great.
>>>>> Thanks
>
is snowing out. My hardware is tucked away in a dark garage. I will be
back Tuesday or Wednesday and get some photos with a tape measure
sitting beside things. The rods could be made up with a little creative
welding.
I will check this thread when I get back to see if someone had old
hardware to get rid of for you and then take photos or not....
Mike
Deano wrote:
> That's what I have. If you have pics of the hardware, that would be
> great. I haven't been able to find anyone that sells the OEM or
> similar hardware.
>
> On Jan 26, 4:08 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> If you look on the windows, the name should be there. The OEM is
>> Whitco, which is what I have on mine. This is the one that snaps down
>> at the tub rim and has roll up windows.
>>
>> If that is what you have, I can take photos of the rods. There is one
>> vertical rod and a horizontal one on each side that anchor into a metal
>> hoop that goes over the driver head side to side and the tub.
>>
>> Mike
>>
>> Deano wrote:
>>> I think it is the OEM set-up although likely replacement cloth. It is
>>> in great condition but the material around the doors flaps a bit.
>>> On Jan 26, 3:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> What make is the top?
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>> Deano wrote:
>>>>> I have a mostly complete softtop for my 86 CJ, but it is missing the
>>>>> support bars around the each of the door frames needed to help the
>>>>> doors seal up properly. Anyone have pics of these (I don't even know
>>>>> what they look like) or extra parts or somewhere I could find these?
>>>>> Any help is great.
>>>>> Thanks
>