so i had this great idea.....
Guest
Posts: n/a
Re: so i had this great idea.....
Better than white paint :)
It all depends on the sealer, but remember, they seal shop floors and
those last for years with daily assaults. Just don't skimp on the
materials. I won't be in my current house forever, but I will def. do it
on my next garage. BTW, I love the stained concrete on the interior.
The people who built it had it done (1981) and I would do it again on my
next house in a heartbeat.
Nathan W. Collier wrote:
> "twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
> news:FUo1b.59$tw2.64215171@newssvr30.news.prodigy. com...
>
>>Nathan,
>>Once you get the paint off, consider staining/sealing the concrete
>>instead.
>
>
> hi thomas,
> how well does staining/sealing stand up to typical garage use? how well
> does it stand up to welding sparks?
> thanks,
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
It all depends on the sealer, but remember, they seal shop floors and
those last for years with daily assaults. Just don't skimp on the
materials. I won't be in my current house forever, but I will def. do it
on my next garage. BTW, I love the stained concrete on the interior.
The people who built it had it done (1981) and I would do it again on my
next house in a heartbeat.
Nathan W. Collier wrote:
> "twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
> news:FUo1b.59$tw2.64215171@newssvr30.news.prodigy. com...
>
>>Nathan,
>>Once you get the paint off, consider staining/sealing the concrete
>>instead.
>
>
> hi thomas,
> how well does staining/sealing stand up to typical garage use? how well
> does it stand up to welding sparks?
> thanks,
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
Guest
Posts: n/a
Re: so i had this great idea.....
"Chuck" <kb9kfs@hsonline.net> wrote in message
news:vkcv0fb2ufva71@corp.supernews.com...
> Epoxy holds up well. Industrial epoxy is very hard. Toxic odors, 3 part
> procedure very similar to POR-15.
> --
> HAV-A-GOOD 1
That whole POR 15 thing comes to my mind when I look at the neighbor's
garage floor. It also reminds me of LineX, or those sorts of products.
Guest
Posts: n/a
Re: so i had this great idea.....
"Chuck" <kb9kfs@hsonline.net> wrote in message
news:vkcv0fb2ufva71@corp.supernews.com...
> Epoxy holds up well. Industrial epoxy is very hard. Toxic odors, 3 part
> procedure very similar to POR-15.
> --
> HAV-A-GOOD 1
That whole POR 15 thing comes to my mind when I look at the neighbor's
garage floor. It also reminds me of LineX, or those sorts of products.
Guest
Posts: n/a
Re: so i had this great idea.....
Landlord white is easier to maintain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Don't you hate it when such a brilliant idea goes so terribly wrong? I
> wouldn't have chosen white as my first choice, it seems this would be very
> difficult to keep clean.
>
> My neighbor had some kind of epoxy floor installed in his garage, it looks
> very nice.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Don't you hate it when such a brilliant idea goes so terribly wrong? I
> wouldn't have chosen white as my first choice, it seems this would be very
> difficult to keep clean.
>
> My neighbor had some kind of epoxy floor installed in his garage, it looks
> very nice.
Guest
Posts: n/a
Re: so i had this great idea.....
Landlord white is easier to maintain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Don't you hate it when such a brilliant idea goes so terribly wrong? I
> wouldn't have chosen white as my first choice, it seems this would be very
> difficult to keep clean.
>
> My neighbor had some kind of epoxy floor installed in his garage, it looks
> very nice.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> Don't you hate it when such a brilliant idea goes so terribly wrong? I
> wouldn't have chosen white as my first choice, it seems this would be very
> difficult to keep clean.
>
> My neighbor had some kind of epoxy floor installed in his garage, it looks
> very nice.
Guest
Posts: n/a
Re: so i had this great idea.....
Nathan, Im not sure if anyone else has mentioned this yet (as this thread is
long), but before you paint cement floors you have to etch the cement with
some muratic (sp) acid, Homely Depot sells a pre mixed solution to use,
they also carry an epoxy based paint designed to be used on floors. I
haven't used either yet (next years plan) but lots of people I know have and
love it..
Snow...
"Nathan W. Collier" <abuse@A0L.com> wrote in message
news:H_f1b.22547$5H4.463109@twister.southeast.rr.c om...
> in an effort to clean up my garage, i had this great idea of whiting out
the
> entire garage. i painted the walls, the foundation brickwork, and even
the
> floor gloss white. http://7slotgrille.com/images/whiteout.jpg
> everything looked good until i started actually rolling things across the
> floor like my floor jack, the welder, the compressor, toolboxes, etc.
> although the paint had cured for 48 hours, anytime i roll something across
> it, it leaves gouges in the paint. a trip to lowes got some special epoxy
> paint that is designed to stand up to garage floor usage, but i have to
get
> all the white off the concrete first. its almost funny how simply rolling
> the jack across the floor will rip the paint up, but a wire wheel on a
> 10,000 rpm grinder seems to take forever.
> so, i guess what im asking is whats the fastest way to remove paint off
> concrete (aside from acid)?
> thanks!
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
long), but before you paint cement floors you have to etch the cement with
some muratic (sp) acid, Homely Depot sells a pre mixed solution to use,
they also carry an epoxy based paint designed to be used on floors. I
haven't used either yet (next years plan) but lots of people I know have and
love it..
Snow...
"Nathan W. Collier" <abuse@A0L.com> wrote in message
news:H_f1b.22547$5H4.463109@twister.southeast.rr.c om...
> in an effort to clean up my garage, i had this great idea of whiting out
the
> entire garage. i painted the walls, the foundation brickwork, and even
the
> floor gloss white. http://7slotgrille.com/images/whiteout.jpg
> everything looked good until i started actually rolling things across the
> floor like my floor jack, the welder, the compressor, toolboxes, etc.
> although the paint had cured for 48 hours, anytime i roll something across
> it, it leaves gouges in the paint. a trip to lowes got some special epoxy
> paint that is designed to stand up to garage floor usage, but i have to
get
> all the white off the concrete first. its almost funny how simply rolling
> the jack across the floor will rip the paint up, but a wire wheel on a
> 10,000 rpm grinder seems to take forever.
> so, i guess what im asking is whats the fastest way to remove paint off
> concrete (aside from acid)?
> thanks!
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
Guest
Posts: n/a
Re: so i had this great idea.....
Nathan, Im not sure if anyone else has mentioned this yet (as this thread is
long), but before you paint cement floors you have to etch the cement with
some muratic (sp) acid, Homely Depot sells a pre mixed solution to use,
they also carry an epoxy based paint designed to be used on floors. I
haven't used either yet (next years plan) but lots of people I know have and
love it..
Snow...
"Nathan W. Collier" <abuse@A0L.com> wrote in message
news:H_f1b.22547$5H4.463109@twister.southeast.rr.c om...
> in an effort to clean up my garage, i had this great idea of whiting out
the
> entire garage. i painted the walls, the foundation brickwork, and even
the
> floor gloss white. http://7slotgrille.com/images/whiteout.jpg
> everything looked good until i started actually rolling things across the
> floor like my floor jack, the welder, the compressor, toolboxes, etc.
> although the paint had cured for 48 hours, anytime i roll something across
> it, it leaves gouges in the paint. a trip to lowes got some special epoxy
> paint that is designed to stand up to garage floor usage, but i have to
get
> all the white off the concrete first. its almost funny how simply rolling
> the jack across the floor will rip the paint up, but a wire wheel on a
> 10,000 rpm grinder seems to take forever.
> so, i guess what im asking is whats the fastest way to remove paint off
> concrete (aside from acid)?
> thanks!
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
long), but before you paint cement floors you have to etch the cement with
some muratic (sp) acid, Homely Depot sells a pre mixed solution to use,
they also carry an epoxy based paint designed to be used on floors. I
haven't used either yet (next years plan) but lots of people I know have and
love it..
Snow...
"Nathan W. Collier" <abuse@A0L.com> wrote in message
news:H_f1b.22547$5H4.463109@twister.southeast.rr.c om...
> in an effort to clean up my garage, i had this great idea of whiting out
the
> entire garage. i painted the walls, the foundation brickwork, and even
the
> floor gloss white. http://7slotgrille.com/images/whiteout.jpg
> everything looked good until i started actually rolling things across the
> floor like my floor jack, the welder, the compressor, toolboxes, etc.
> although the paint had cured for 48 hours, anytime i roll something across
> it, it leaves gouges in the paint. a trip to lowes got some special epoxy
> paint that is designed to stand up to garage floor usage, but i have to
get
> all the white off the concrete first. its almost funny how simply rolling
> the jack across the floor will rip the paint up, but a wire wheel on a
> 10,000 rpm grinder seems to take forever.
> so, i guess what im asking is whats the fastest way to remove paint off
> concrete (aside from acid)?
> thanks!
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
Guest
Posts: n/a
Re: so i had this great idea.....
I work for a bridge constuction company, and we do rehabs on worn bridge
decks with latex epoxy concrete. It bonds to ANYTHING and can be poured at
a minimum of 1/2" i think. Very durable stuff, I have seen epoxied deck
that the epoxy was the only thing left.
--
1eyedjack
'86 CJ7 rustbucket
"Nathan W. Collier" <abuse@A0L.com> wrote in message
news:H_f1b.22547$5H4.463109@twister.southeast.rr.c om...
> in an effort to clean up my garage, i had this great idea of whiting out
the
> entire garage. i painted the walls, the foundation brickwork, and even
the
> floor gloss white. http://7slotgrille.com/images/whiteout.jpg
> everything looked good until i started actually rolling things across the
> floor like my floor jack, the welder, the compressor, toolboxes, etc.
> although the paint had cured for 48 hours, anytime i roll something across
> it, it leaves gouges in the paint. a trip to lowes got some special epoxy
> paint that is designed to stand up to garage floor usage, but i have to
get
> all the white off the concrete first. its almost funny how simply rolling
> the jack across the floor will rip the paint up, but a wire wheel on a
> 10,000 rpm grinder seems to take forever.
> so, i guess what im asking is whats the fastest way to remove paint off
> concrete (aside from acid)?
> thanks!
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
decks with latex epoxy concrete. It bonds to ANYTHING and can be poured at
a minimum of 1/2" i think. Very durable stuff, I have seen epoxied deck
that the epoxy was the only thing left.
--
1eyedjack
'86 CJ7 rustbucket
"Nathan W. Collier" <abuse@A0L.com> wrote in message
news:H_f1b.22547$5H4.463109@twister.southeast.rr.c om...
> in an effort to clean up my garage, i had this great idea of whiting out
the
> entire garage. i painted the walls, the foundation brickwork, and even
the
> floor gloss white. http://7slotgrille.com/images/whiteout.jpg
> everything looked good until i started actually rolling things across the
> floor like my floor jack, the welder, the compressor, toolboxes, etc.
> although the paint had cured for 48 hours, anytime i roll something across
> it, it leaves gouges in the paint. a trip to lowes got some special epoxy
> paint that is designed to stand up to garage floor usage, but i have to
get
> all the white off the concrete first. its almost funny how simply rolling
> the jack across the floor will rip the paint up, but a wire wheel on a
> 10,000 rpm grinder seems to take forever.
> so, i guess what im asking is whats the fastest way to remove paint off
> concrete (aside from acid)?
> thanks!
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
Guest
Posts: n/a
Re: so i had this great idea.....
I work for a bridge constuction company, and we do rehabs on worn bridge
decks with latex epoxy concrete. It bonds to ANYTHING and can be poured at
a minimum of 1/2" i think. Very durable stuff, I have seen epoxied deck
that the epoxy was the only thing left.
--
1eyedjack
'86 CJ7 rustbucket
"Nathan W. Collier" <abuse@A0L.com> wrote in message
news:H_f1b.22547$5H4.463109@twister.southeast.rr.c om...
> in an effort to clean up my garage, i had this great idea of whiting out
the
> entire garage. i painted the walls, the foundation brickwork, and even
the
> floor gloss white. http://7slotgrille.com/images/whiteout.jpg
> everything looked good until i started actually rolling things across the
> floor like my floor jack, the welder, the compressor, toolboxes, etc.
> although the paint had cured for 48 hours, anytime i roll something across
> it, it leaves gouges in the paint. a trip to lowes got some special epoxy
> paint that is designed to stand up to garage floor usage, but i have to
get
> all the white off the concrete first. its almost funny how simply rolling
> the jack across the floor will rip the paint up, but a wire wheel on a
> 10,000 rpm grinder seems to take forever.
> so, i guess what im asking is whats the fastest way to remove paint off
> concrete (aside from acid)?
> thanks!
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
decks with latex epoxy concrete. It bonds to ANYTHING and can be poured at
a minimum of 1/2" i think. Very durable stuff, I have seen epoxied deck
that the epoxy was the only thing left.
--
1eyedjack
'86 CJ7 rustbucket
"Nathan W. Collier" <abuse@A0L.com> wrote in message
news:H_f1b.22547$5H4.463109@twister.southeast.rr.c om...
> in an effort to clean up my garage, i had this great idea of whiting out
the
> entire garage. i painted the walls, the foundation brickwork, and even
the
> floor gloss white. http://7slotgrille.com/images/whiteout.jpg
> everything looked good until i started actually rolling things across the
> floor like my floor jack, the welder, the compressor, toolboxes, etc.
> although the paint had cured for 48 hours, anytime i roll something across
> it, it leaves gouges in the paint. a trip to lowes got some special epoxy
> paint that is designed to stand up to garage floor usage, but i have to
get
> all the white off the concrete first. its almost funny how simply rolling
> the jack across the floor will rip the paint up, but a wire wheel on a
> 10,000 rpm grinder seems to take forever.
> so, i guess what im asking is whats the fastest way to remove paint off
> concrete (aside from acid)?
> thanks!
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
Guest
Posts: n/a
Re: so i had this great idea.....
"Jack" <jackhoward@suscom.net> wrote in message
news:vki2usevdqlcfa@corp.supernews.com...
> It bonds to ANYTHING and can be poured at
> a minimum of 1/2" i think. Very durable stuff
cool. where can i get some? :-)
--
Nathan W. Collier
http://7SlotGrille.com
news:vki2usevdqlcfa@corp.supernews.com...
> It bonds to ANYTHING and can be poured at
> a minimum of 1/2" i think. Very durable stuff
cool. where can i get some? :-)
--
Nathan W. Collier
http://7SlotGrille.com
