sigh.. bloody amazing alignment story.
#1
Guest
Posts: n/a
sigh.. bloody amazing alignment story.
So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
outside edge. not good for only 200 miles.
They did the alignment, they did it _WRONG_, so I take it back.
Three hours later they get to the ZJ and proclaim it fine. Yea,
fine, I can see the Caster angle showing as 4 deg. Vehicle spec
is 6.5-7.5 degrees.
So now they set about fixing what they should have in the first place.
But try as they might they can only get 3.2 degrees
hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
the caster adjustment forward.....
Well... How can you get a result of 3.2 by rotating the caster
angle forward... Simple.. your so brain dead you don't RECALIBRATE
for zero (baseline) caster and the machine tells you it has 3.2 when
it actually has 4 + 3.2 or 7.2 positive caster..
That and the steering wheel is sitting cockeyed now.
I'm taking it to another store in that chain and seeing if they have
someone with half a clue. Thankfully the alignment came with a 12mo
12,000 mile warranty.
This is one of those infuriating times when I wish I had the equipment
here to do the job myself.
Speaking of DIY, Looking at the links show deflated and cracked grease
boots. Gonna have to replace parts anyway. If the mechanic was doing
the job rather than the time that should have been brought to my attention.
..bah.
--
DougW
If it sounds like a duck, runs like a duck, and corners like a duck
it's probably my ZJ.
outside edge. not good for only 200 miles.
They did the alignment, they did it _WRONG_, so I take it back.
Three hours later they get to the ZJ and proclaim it fine. Yea,
fine, I can see the Caster angle showing as 4 deg. Vehicle spec
is 6.5-7.5 degrees.
So now they set about fixing what they should have in the first place.
But try as they might they can only get 3.2 degrees
hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
the caster adjustment forward.....
Well... How can you get a result of 3.2 by rotating the caster
angle forward... Simple.. your so brain dead you don't RECALIBRATE
for zero (baseline) caster and the machine tells you it has 3.2 when
it actually has 4 + 3.2 or 7.2 positive caster..
That and the steering wheel is sitting cockeyed now.
I'm taking it to another store in that chain and seeing if they have
someone with half a clue. Thankfully the alignment came with a 12mo
12,000 mile warranty.
This is one of those infuriating times when I wish I had the equipment
here to do the job myself.
Speaking of DIY, Looking at the links show deflated and cracked grease
boots. Gonna have to replace parts anyway. If the mechanic was doing
the job rather than the time that should have been brought to my attention.
..bah.
--
DougW
If it sounds like a duck, runs like a duck, and corners like a duck
it's probably my ZJ.
#2
Guest
Posts: n/a
Re: sigh.. bloody amazing alignment story.
If you want a job done right, you must do it yourself. Get out the
plumb bobs and level.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
> outside edge. not good for only 200 miles.
>
> They did the alignment, they did it _WRONG_, so I take it back.
> Three hours later they get to the ZJ and proclaim it fine. Yea,
> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
> is 6.5-7.5 degrees.
>
> So now they set about fixing what they should have in the first place.
> But try as they might they can only get 3.2 degrees
>
> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
> the caster adjustment forward.....
>
> Well... How can you get a result of 3.2 by rotating the caster
> angle forward... Simple.. your so brain dead you don't RECALIBRATE
> for zero (baseline) caster and the machine tells you it has 3.2 when
> it actually has 4 + 3.2 or 7.2 positive caster..
>
> That and the steering wheel is sitting cockeyed now.
>
> I'm taking it to another store in that chain and seeing if they have
> someone with half a clue. Thankfully the alignment came with a 12mo
> 12,000 mile warranty.
>
> This is one of those infuriating times when I wish I had the equipment
> here to do the job myself.
>
> Speaking of DIY, Looking at the links show deflated and cracked grease
> boots. Gonna have to replace parts anyway. If the mechanic was doing
> the job rather than the time that should have been brought to my attention.
>
> .bah.
>
> --
> DougW
> If it sounds like a duck, runs like a duck, and corners like a duck
> it's probably my ZJ.
plumb bobs and level.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
> outside edge. not good for only 200 miles.
>
> They did the alignment, they did it _WRONG_, so I take it back.
> Three hours later they get to the ZJ and proclaim it fine. Yea,
> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
> is 6.5-7.5 degrees.
>
> So now they set about fixing what they should have in the first place.
> But try as they might they can only get 3.2 degrees
>
> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
> the caster adjustment forward.....
>
> Well... How can you get a result of 3.2 by rotating the caster
> angle forward... Simple.. your so brain dead you don't RECALIBRATE
> for zero (baseline) caster and the machine tells you it has 3.2 when
> it actually has 4 + 3.2 or 7.2 positive caster..
>
> That and the steering wheel is sitting cockeyed now.
>
> I'm taking it to another store in that chain and seeing if they have
> someone with half a clue. Thankfully the alignment came with a 12mo
> 12,000 mile warranty.
>
> This is one of those infuriating times when I wish I had the equipment
> here to do the job myself.
>
> Speaking of DIY, Looking at the links show deflated and cracked grease
> boots. Gonna have to replace parts anyway. If the mechanic was doing
> the job rather than the time that should have been brought to my attention.
>
> .bah.
>
> --
> DougW
> If it sounds like a duck, runs like a duck, and corners like a duck
> it's probably my ZJ.
#3
Guest
Posts: n/a
Re: sigh.. bloody amazing alignment story.
If you want a job done right, you must do it yourself. Get out the
plumb bobs and level.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
> outside edge. not good for only 200 miles.
>
> They did the alignment, they did it _WRONG_, so I take it back.
> Three hours later they get to the ZJ and proclaim it fine. Yea,
> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
> is 6.5-7.5 degrees.
>
> So now they set about fixing what they should have in the first place.
> But try as they might they can only get 3.2 degrees
>
> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
> the caster adjustment forward.....
>
> Well... How can you get a result of 3.2 by rotating the caster
> angle forward... Simple.. your so brain dead you don't RECALIBRATE
> for zero (baseline) caster and the machine tells you it has 3.2 when
> it actually has 4 + 3.2 or 7.2 positive caster..
>
> That and the steering wheel is sitting cockeyed now.
>
> I'm taking it to another store in that chain and seeing if they have
> someone with half a clue. Thankfully the alignment came with a 12mo
> 12,000 mile warranty.
>
> This is one of those infuriating times when I wish I had the equipment
> here to do the job myself.
>
> Speaking of DIY, Looking at the links show deflated and cracked grease
> boots. Gonna have to replace parts anyway. If the mechanic was doing
> the job rather than the time that should have been brought to my attention.
>
> .bah.
>
> --
> DougW
> If it sounds like a duck, runs like a duck, and corners like a duck
> it's probably my ZJ.
plumb bobs and level.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
> outside edge. not good for only 200 miles.
>
> They did the alignment, they did it _WRONG_, so I take it back.
> Three hours later they get to the ZJ and proclaim it fine. Yea,
> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
> is 6.5-7.5 degrees.
>
> So now they set about fixing what they should have in the first place.
> But try as they might they can only get 3.2 degrees
>
> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
> the caster adjustment forward.....
>
> Well... How can you get a result of 3.2 by rotating the caster
> angle forward... Simple.. your so brain dead you don't RECALIBRATE
> for zero (baseline) caster and the machine tells you it has 3.2 when
> it actually has 4 + 3.2 or 7.2 positive caster..
>
> That and the steering wheel is sitting cockeyed now.
>
> I'm taking it to another store in that chain and seeing if they have
> someone with half a clue. Thankfully the alignment came with a 12mo
> 12,000 mile warranty.
>
> This is one of those infuriating times when I wish I had the equipment
> here to do the job myself.
>
> Speaking of DIY, Looking at the links show deflated and cracked grease
> boots. Gonna have to replace parts anyway. If the mechanic was doing
> the job rather than the time that should have been brought to my attention.
>
> .bah.
>
> --
> DougW
> If it sounds like a duck, runs like a duck, and corners like a duck
> it's probably my ZJ.
#4
Guest
Posts: n/a
Re: sigh.. bloody amazing alignment story.
If you want a job done right, you must do it yourself. Get out the
plumb bobs and level.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
> outside edge. not good for only 200 miles.
>
> They did the alignment, they did it _WRONG_, so I take it back.
> Three hours later they get to the ZJ and proclaim it fine. Yea,
> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
> is 6.5-7.5 degrees.
>
> So now they set about fixing what they should have in the first place.
> But try as they might they can only get 3.2 degrees
>
> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
> the caster adjustment forward.....
>
> Well... How can you get a result of 3.2 by rotating the caster
> angle forward... Simple.. your so brain dead you don't RECALIBRATE
> for zero (baseline) caster and the machine tells you it has 3.2 when
> it actually has 4 + 3.2 or 7.2 positive caster..
>
> That and the steering wheel is sitting cockeyed now.
>
> I'm taking it to another store in that chain and seeing if they have
> someone with half a clue. Thankfully the alignment came with a 12mo
> 12,000 mile warranty.
>
> This is one of those infuriating times when I wish I had the equipment
> here to do the job myself.
>
> Speaking of DIY, Looking at the links show deflated and cracked grease
> boots. Gonna have to replace parts anyway. If the mechanic was doing
> the job rather than the time that should have been brought to my attention.
>
> .bah.
>
> --
> DougW
> If it sounds like a duck, runs like a duck, and corners like a duck
> it's probably my ZJ.
plumb bobs and level.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
> outside edge. not good for only 200 miles.
>
> They did the alignment, they did it _WRONG_, so I take it back.
> Three hours later they get to the ZJ and proclaim it fine. Yea,
> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
> is 6.5-7.5 degrees.
>
> So now they set about fixing what they should have in the first place.
> But try as they might they can only get 3.2 degrees
>
> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
> the caster adjustment forward.....
>
> Well... How can you get a result of 3.2 by rotating the caster
> angle forward... Simple.. your so brain dead you don't RECALIBRATE
> for zero (baseline) caster and the machine tells you it has 3.2 when
> it actually has 4 + 3.2 or 7.2 positive caster..
>
> That and the steering wheel is sitting cockeyed now.
>
> I'm taking it to another store in that chain and seeing if they have
> someone with half a clue. Thankfully the alignment came with a 12mo
> 12,000 mile warranty.
>
> This is one of those infuriating times when I wish I had the equipment
> here to do the job myself.
>
> Speaking of DIY, Looking at the links show deflated and cracked grease
> boots. Gonna have to replace parts anyway. If the mechanic was doing
> the job rather than the time that should have been brought to my attention.
>
> .bah.
>
> --
> DougW
> If it sounds like a duck, runs like a duck, and corners like a duck
> it's probably my ZJ.
#5
Guest
Posts: n/a
Re: sigh.. bloody amazing alignment story.
If you want a job done right, you must do it yourself. Get out the
plumb bobs and level.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
> outside edge. not good for only 200 miles.
>
> They did the alignment, they did it _WRONG_, so I take it back.
> Three hours later they get to the ZJ and proclaim it fine. Yea,
> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
> is 6.5-7.5 degrees.
>
> So now they set about fixing what they should have in the first place.
> But try as they might they can only get 3.2 degrees
>
> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
> the caster adjustment forward.....
>
> Well... How can you get a result of 3.2 by rotating the caster
> angle forward... Simple.. your so brain dead you don't RECALIBRATE
> for zero (baseline) caster and the machine tells you it has 3.2 when
> it actually has 4 + 3.2 or 7.2 positive caster..
>
> That and the steering wheel is sitting cockeyed now.
>
> I'm taking it to another store in that chain and seeing if they have
> someone with half a clue. Thankfully the alignment came with a 12mo
> 12,000 mile warranty.
>
> This is one of those infuriating times when I wish I had the equipment
> here to do the job myself.
>
> Speaking of DIY, Looking at the links show deflated and cracked grease
> boots. Gonna have to replace parts anyway. If the mechanic was doing
> the job rather than the time that should have been brought to my attention.
>
> .bah.
>
> --
> DougW
> If it sounds like a duck, runs like a duck, and corners like a duck
> it's probably my ZJ.
plumb bobs and level.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
> outside edge. not good for only 200 miles.
>
> They did the alignment, they did it _WRONG_, so I take it back.
> Three hours later they get to the ZJ and proclaim it fine. Yea,
> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
> is 6.5-7.5 degrees.
>
> So now they set about fixing what they should have in the first place.
> But try as they might they can only get 3.2 degrees
>
> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
> the caster adjustment forward.....
>
> Well... How can you get a result of 3.2 by rotating the caster
> angle forward... Simple.. your so brain dead you don't RECALIBRATE
> for zero (baseline) caster and the machine tells you it has 3.2 when
> it actually has 4 + 3.2 or 7.2 positive caster..
>
> That and the steering wheel is sitting cockeyed now.
>
> I'm taking it to another store in that chain and seeing if they have
> someone with half a clue. Thankfully the alignment came with a 12mo
> 12,000 mile warranty.
>
> This is one of those infuriating times when I wish I had the equipment
> here to do the job myself.
>
> Speaking of DIY, Looking at the links show deflated and cracked grease
> boots. Gonna have to replace parts anyway. If the mechanic was doing
> the job rather than the time that should have been brought to my attention.
>
> .bah.
>
> --
> DougW
> If it sounds like a duck, runs like a duck, and corners like a duck
> it's probably my ZJ.
#6
Guest
Posts: n/a
Re: sigh.. bloody amazing alignment story.
that and a tape measure is all I ever need.
KH
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:431FA1A2.E4F41C92@***.net...
> If you want a job done right, you must do it yourself. Get out the
> plumb bobs and level.
> God Bless America, ill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
>>
>> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
>> outside edge. not good for only 200 miles.
>>
>> They did the alignment, they did it _WRONG_, so I take it back.
>> Three hours later they get to the ZJ and proclaim it fine. Yea,
>> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
>> is 6.5-7.5 degrees.
>>
>> So now they set about fixing what they should have in the first place.
>> But try as they might they can only get 3.2 degrees
>>
>> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
>> the caster adjustment forward.....
>>
>> Well... How can you get a result of 3.2 by rotating the caster
>> angle forward... Simple.. your so brain dead you don't RECALIBRATE
>> for zero (baseline) caster and the machine tells you it has 3.2 when
>> it actually has 4 + 3.2 or 7.2 positive caster..
>>
>> That and the steering wheel is sitting cockeyed now.
>>
>> I'm taking it to another store in that chain and seeing if they have
>> someone with half a clue. Thankfully the alignment came with a 12mo
>> 12,000 mile warranty.
>>
>> This is one of those infuriating times when I wish I had the equipment
>> here to do the job myself.
>>
>> Speaking of DIY, Looking at the links show deflated and cracked grease
>> boots. Gonna have to replace parts anyway. If the mechanic was doing
>> the job rather than the time that should have been brought to my
>> attention.
>>
>> .bah.
>>
>> --
>> DougW
>> If it sounds like a duck, runs like a duck, and corners like a duck
>> it's probably my ZJ.
KH
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:431FA1A2.E4F41C92@***.net...
> If you want a job done right, you must do it yourself. Get out the
> plumb bobs and level.
> God Bless America, ill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
>>
>> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
>> outside edge. not good for only 200 miles.
>>
>> They did the alignment, they did it _WRONG_, so I take it back.
>> Three hours later they get to the ZJ and proclaim it fine. Yea,
>> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
>> is 6.5-7.5 degrees.
>>
>> So now they set about fixing what they should have in the first place.
>> But try as they might they can only get 3.2 degrees
>>
>> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
>> the caster adjustment forward.....
>>
>> Well... How can you get a result of 3.2 by rotating the caster
>> angle forward... Simple.. your so brain dead you don't RECALIBRATE
>> for zero (baseline) caster and the machine tells you it has 3.2 when
>> it actually has 4 + 3.2 or 7.2 positive caster..
>>
>> That and the steering wheel is sitting cockeyed now.
>>
>> I'm taking it to another store in that chain and seeing if they have
>> someone with half a clue. Thankfully the alignment came with a 12mo
>> 12,000 mile warranty.
>>
>> This is one of those infuriating times when I wish I had the equipment
>> here to do the job myself.
>>
>> Speaking of DIY, Looking at the links show deflated and cracked grease
>> boots. Gonna have to replace parts anyway. If the mechanic was doing
>> the job rather than the time that should have been brought to my
>> attention.
>>
>> .bah.
>>
>> --
>> DougW
>> If it sounds like a duck, runs like a duck, and corners like a duck
>> it's probably my ZJ.
#7
Guest
Posts: n/a
Re: sigh.. bloody amazing alignment story.
that and a tape measure is all I ever need.
KH
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:431FA1A2.E4F41C92@***.net...
> If you want a job done right, you must do it yourself. Get out the
> plumb bobs and level.
> God Bless America, ill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
>>
>> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
>> outside edge. not good for only 200 miles.
>>
>> They did the alignment, they did it _WRONG_, so I take it back.
>> Three hours later they get to the ZJ and proclaim it fine. Yea,
>> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
>> is 6.5-7.5 degrees.
>>
>> So now they set about fixing what they should have in the first place.
>> But try as they might they can only get 3.2 degrees
>>
>> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
>> the caster adjustment forward.....
>>
>> Well... How can you get a result of 3.2 by rotating the caster
>> angle forward... Simple.. your so brain dead you don't RECALIBRATE
>> for zero (baseline) caster and the machine tells you it has 3.2 when
>> it actually has 4 + 3.2 or 7.2 positive caster..
>>
>> That and the steering wheel is sitting cockeyed now.
>>
>> I'm taking it to another store in that chain and seeing if they have
>> someone with half a clue. Thankfully the alignment came with a 12mo
>> 12,000 mile warranty.
>>
>> This is one of those infuriating times when I wish I had the equipment
>> here to do the job myself.
>>
>> Speaking of DIY, Looking at the links show deflated and cracked grease
>> boots. Gonna have to replace parts anyway. If the mechanic was doing
>> the job rather than the time that should have been brought to my
>> attention.
>>
>> .bah.
>>
>> --
>> DougW
>> If it sounds like a duck, runs like a duck, and corners like a duck
>> it's probably my ZJ.
KH
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:431FA1A2.E4F41C92@***.net...
> If you want a job done right, you must do it yourself. Get out the
> plumb bobs and level.
> God Bless America, ill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
>>
>> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
>> outside edge. not good for only 200 miles.
>>
>> They did the alignment, they did it _WRONG_, so I take it back.
>> Three hours later they get to the ZJ and proclaim it fine. Yea,
>> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
>> is 6.5-7.5 degrees.
>>
>> So now they set about fixing what they should have in the first place.
>> But try as they might they can only get 3.2 degrees
>>
>> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
>> the caster adjustment forward.....
>>
>> Well... How can you get a result of 3.2 by rotating the caster
>> angle forward... Simple.. your so brain dead you don't RECALIBRATE
>> for zero (baseline) caster and the machine tells you it has 3.2 when
>> it actually has 4 + 3.2 or 7.2 positive caster..
>>
>> That and the steering wheel is sitting cockeyed now.
>>
>> I'm taking it to another store in that chain and seeing if they have
>> someone with half a clue. Thankfully the alignment came with a 12mo
>> 12,000 mile warranty.
>>
>> This is one of those infuriating times when I wish I had the equipment
>> here to do the job myself.
>>
>> Speaking of DIY, Looking at the links show deflated and cracked grease
>> boots. Gonna have to replace parts anyway. If the mechanic was doing
>> the job rather than the time that should have been brought to my
>> attention.
>>
>> .bah.
>>
>> --
>> DougW
>> If it sounds like a duck, runs like a duck, and corners like a duck
>> it's probably my ZJ.
#8
Guest
Posts: n/a
Re: sigh.. bloody amazing alignment story.
that and a tape measure is all I ever need.
KH
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:431FA1A2.E4F41C92@***.net...
> If you want a job done right, you must do it yourself. Get out the
> plumb bobs and level.
> God Bless America, ill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
>>
>> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
>> outside edge. not good for only 200 miles.
>>
>> They did the alignment, they did it _WRONG_, so I take it back.
>> Three hours later they get to the ZJ and proclaim it fine. Yea,
>> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
>> is 6.5-7.5 degrees.
>>
>> So now they set about fixing what they should have in the first place.
>> But try as they might they can only get 3.2 degrees
>>
>> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
>> the caster adjustment forward.....
>>
>> Well... How can you get a result of 3.2 by rotating the caster
>> angle forward... Simple.. your so brain dead you don't RECALIBRATE
>> for zero (baseline) caster and the machine tells you it has 3.2 when
>> it actually has 4 + 3.2 or 7.2 positive caster..
>>
>> That and the steering wheel is sitting cockeyed now.
>>
>> I'm taking it to another store in that chain and seeing if they have
>> someone with half a clue. Thankfully the alignment came with a 12mo
>> 12,000 mile warranty.
>>
>> This is one of those infuriating times when I wish I had the equipment
>> here to do the job myself.
>>
>> Speaking of DIY, Looking at the links show deflated and cracked grease
>> boots. Gonna have to replace parts anyway. If the mechanic was doing
>> the job rather than the time that should have been brought to my
>> attention.
>>
>> .bah.
>>
>> --
>> DougW
>> If it sounds like a duck, runs like a duck, and corners like a duck
>> it's probably my ZJ.
KH
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:431FA1A2.E4F41C92@***.net...
> If you want a job done right, you must do it yourself. Get out the
> plumb bobs and level.
> God Bless America, ill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
>>
>> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
>> outside edge. not good for only 200 miles.
>>
>> They did the alignment, they did it _WRONG_, so I take it back.
>> Three hours later they get to the ZJ and proclaim it fine. Yea,
>> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
>> is 6.5-7.5 degrees.
>>
>> So now they set about fixing what they should have in the first place.
>> But try as they might they can only get 3.2 degrees
>>
>> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
>> the caster adjustment forward.....
>>
>> Well... How can you get a result of 3.2 by rotating the caster
>> angle forward... Simple.. your so brain dead you don't RECALIBRATE
>> for zero (baseline) caster and the machine tells you it has 3.2 when
>> it actually has 4 + 3.2 or 7.2 positive caster..
>>
>> That and the steering wheel is sitting cockeyed now.
>>
>> I'm taking it to another store in that chain and seeing if they have
>> someone with half a clue. Thankfully the alignment came with a 12mo
>> 12,000 mile warranty.
>>
>> This is one of those infuriating times when I wish I had the equipment
>> here to do the job myself.
>>
>> Speaking of DIY, Looking at the links show deflated and cracked grease
>> boots. Gonna have to replace parts anyway. If the mechanic was doing
>> the job rather than the time that should have been brought to my
>> attention.
>>
>> .bah.
>>
>> --
>> DougW
>> If it sounds like a duck, runs like a duck, and corners like a duck
>> it's probably my ZJ.
#9
Guest
Posts: n/a
Re: sigh.. bloody amazing alignment story.
that and a tape measure is all I ever need.
KH
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:431FA1A2.E4F41C92@***.net...
> If you want a job done right, you must do it yourself. Get out the
> plumb bobs and level.
> God Bless America, ill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
>>
>> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
>> outside edge. not good for only 200 miles.
>>
>> They did the alignment, they did it _WRONG_, so I take it back.
>> Three hours later they get to the ZJ and proclaim it fine. Yea,
>> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
>> is 6.5-7.5 degrees.
>>
>> So now they set about fixing what they should have in the first place.
>> But try as they might they can only get 3.2 degrees
>>
>> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
>> the caster adjustment forward.....
>>
>> Well... How can you get a result of 3.2 by rotating the caster
>> angle forward... Simple.. your so brain dead you don't RECALIBRATE
>> for zero (baseline) caster and the machine tells you it has 3.2 when
>> it actually has 4 + 3.2 or 7.2 positive caster..
>>
>> That and the steering wheel is sitting cockeyed now.
>>
>> I'm taking it to another store in that chain and seeing if they have
>> someone with half a clue. Thankfully the alignment came with a 12mo
>> 12,000 mile warranty.
>>
>> This is one of those infuriating times when I wish I had the equipment
>> here to do the job myself.
>>
>> Speaking of DIY, Looking at the links show deflated and cracked grease
>> boots. Gonna have to replace parts anyway. If the mechanic was doing
>> the job rather than the time that should have been brought to my
>> attention.
>>
>> .bah.
>>
>> --
>> DougW
>> If it sounds like a duck, runs like a duck, and corners like a duck
>> it's probably my ZJ.
KH
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:431FA1A2.E4F41C92@***.net...
> If you want a job done right, you must do it yourself. Get out the
> plumb bobs and level.
> God Bless America, ill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DougW wrote:
>>
>> So.. new tires from Hibdon/Tires-Plus, but they are wearing on the
>> outside edge. not good for only 200 miles.
>>
>> They did the alignment, they did it _WRONG_, so I take it back.
>> Three hours later they get to the ZJ and proclaim it fine. Yea,
>> fine, I can see the Caster angle showing as 4 deg. Vehicle spec
>> is 6.5-7.5 degrees.
>>
>> So now they set about fixing what they should have in the first place.
>> But try as they might they can only get 3.2 degrees
>>
>> hold on.. you would think if they had 4 and now had 3.2 AFTER rotating
>> the caster adjustment forward.....
>>
>> Well... How can you get a result of 3.2 by rotating the caster
>> angle forward... Simple.. your so brain dead you don't RECALIBRATE
>> for zero (baseline) caster and the machine tells you it has 3.2 when
>> it actually has 4 + 3.2 or 7.2 positive caster..
>>
>> That and the steering wheel is sitting cockeyed now.
>>
>> I'm taking it to another store in that chain and seeing if they have
>> someone with half a clue. Thankfully the alignment came with a 12mo
>> 12,000 mile warranty.
>>
>> This is one of those infuriating times when I wish I had the equipment
>> here to do the job myself.
>>
>> Speaking of DIY, Looking at the links show deflated and cracked grease
>> boots. Gonna have to replace parts anyway. If the mechanic was doing
>> the job rather than the time that should have been brought to my
>> attention.
>>
>> .bah.
>>
>> --
>> DougW
>> If it sounds like a duck, runs like a duck, and corners like a duck
>> it's probably my ZJ.
Thread
Thread Starter
Forum
Replies
Last Post
jeepadmin
Other pics and vids
1
05-31-2011 01:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)