Shipping T/C advice
10-28-2003, 06:33 PM
#21
Guest
Posts: n/a
Re: Shipping T/C advice
I got 120lb of skid plates flown over from PA to here for 118 bucks in 7
days - not bad at all !! That was BAX Global.
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"c" <c@me.org> wrote in message
news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
: If he takes it to a shipping store, he'd be much further ahead to throw it
: out in the street. They will bend you over on shipping something like
that.
: You might want to look into truck freight on it since it is already
crated.
: I recently shipped a grinding machine from Michigan to Oregon. The weight
: was over 250 pounds and total shipping cost was $64. It took 6 days to
: deliver which is actually faster than a UPS package will get there.
:
: Chris
:
: "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
: news:1zBnb.122922$gv5.108399@fed1read05...
: > I hope you are selling it for a bunch. Hehe. All those hours of
packaging!
: > What if you take it to a postal store and have them deal with it.
: > KH
: >
: > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
: > news:ctBnb.1021$Aa6.33506@news.uswest.net...
: > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
crate
: > for
: > > it, and never being one to under-build something..... the crate weighs
: 63
: > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
: > ground
: > > limit. What can I use to ship it that weighs less?
: > >
: > > The crate I made was 20 X 22 X 30. The new one can be at least 2
inches
: > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
any
: > > containers anybody can think of that meet these dimensions and could
: hold
: > a
: > > 108 lb T/C and don't weigh over say 40 pounds ??
: > >
: > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
: > around
: > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
: > > container of some kind be able to do the job?
: > >
: > >
: >
: >
:
:
days - not bad at all !! That was BAX Global.
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"c" <c@me.org> wrote in message
news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
: If he takes it to a shipping store, he'd be much further ahead to throw it
: out in the street. They will bend you over on shipping something like
that.
: You might want to look into truck freight on it since it is already
crated.
: I recently shipped a grinding machine from Michigan to Oregon. The weight
: was over 250 pounds and total shipping cost was $64. It took 6 days to
: deliver which is actually faster than a UPS package will get there.
:
: Chris
:
: "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
: news:1zBnb.122922$gv5.108399@fed1read05...
: > I hope you are selling it for a bunch. Hehe. All those hours of
packaging!
: > What if you take it to a postal store and have them deal with it.
: > KH
: >
: > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
: > news:ctBnb.1021$Aa6.33506@news.uswest.net...
: > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
crate
: > for
: > > it, and never being one to under-build something..... the crate weighs
: 63
: > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
: > ground
: > > limit. What can I use to ship it that weighs less?
: > >
: > > The crate I made was 20 X 22 X 30. The new one can be at least 2
inches
: > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
any
: > > containers anybody can think of that meet these dimensions and could
: hold
: > a
: > > 108 lb T/C and don't weigh over say 40 pounds ??
: > >
: > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
: > around
: > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
: > > container of some kind be able to do the job?
: > >
: > >
: >
: >
:
:
10-28-2003, 06:33 PM
#22
Guest
Posts: n/a
Re: Shipping T/C advice
I got 120lb of skid plates flown over from PA to here for 118 bucks in 7
days - not bad at all !! That was BAX Global.
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"c" <c@me.org> wrote in message
news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
: If he takes it to a shipping store, he'd be much further ahead to throw it
: out in the street. They will bend you over on shipping something like
that.
: You might want to look into truck freight on it since it is already
crated.
: I recently shipped a grinding machine from Michigan to Oregon. The weight
: was over 250 pounds and total shipping cost was $64. It took 6 days to
: deliver which is actually faster than a UPS package will get there.
:
: Chris
:
: "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
: news:1zBnb.122922$gv5.108399@fed1read05...
: > I hope you are selling it for a bunch. Hehe. All those hours of
packaging!
: > What if you take it to a postal store and have them deal with it.
: > KH
: >
: > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
: > news:ctBnb.1021$Aa6.33506@news.uswest.net...
: > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
crate
: > for
: > > it, and never being one to under-build something..... the crate weighs
: 63
: > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
: > ground
: > > limit. What can I use to ship it that weighs less?
: > >
: > > The crate I made was 20 X 22 X 30. The new one can be at least 2
inches
: > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
any
: > > containers anybody can think of that meet these dimensions and could
: hold
: > a
: > > 108 lb T/C and don't weigh over say 40 pounds ??
: > >
: > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
: > around
: > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
: > > container of some kind be able to do the job?
: > >
: > >
: >
: >
:
:
days - not bad at all !! That was BAX Global.
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"c" <c@me.org> wrote in message
news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
: If he takes it to a shipping store, he'd be much further ahead to throw it
: out in the street. They will bend you over on shipping something like
that.
: You might want to look into truck freight on it since it is already
crated.
: I recently shipped a grinding machine from Michigan to Oregon. The weight
: was over 250 pounds and total shipping cost was $64. It took 6 days to
: deliver which is actually faster than a UPS package will get there.
:
: Chris
:
: "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
: news:1zBnb.122922$gv5.108399@fed1read05...
: > I hope you are selling it for a bunch. Hehe. All those hours of
packaging!
: > What if you take it to a postal store and have them deal with it.
: > KH
: >
: > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
: > news:ctBnb.1021$Aa6.33506@news.uswest.net...
: > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
crate
: > for
: > > it, and never being one to under-build something..... the crate weighs
: 63
: > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
: > ground
: > > limit. What can I use to ship it that weighs less?
: > >
: > > The crate I made was 20 X 22 X 30. The new one can be at least 2
inches
: > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
any
: > > containers anybody can think of that meet these dimensions and could
: hold
: > a
: > > 108 lb T/C and don't weigh over say 40 pounds ??
: > >
: > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
: > around
: > > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
: > > container of some kind be able to do the job?
: > >
: > >
: >
: >
:
:
10-28-2003, 06:57 PM
#23
Guest
Posts: n/a
Re: Shipping T/C advice
That's why I suggested the trucking firms. They don't require any special
palleting or crating, unless the item can't be unloaded without a forklift.
I would check into it, you may be surprised at the cost.
Chris
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:w1Dnb.1064$PV2.87015@news.uswest.net...
> He is paying shipping, but if I have to spend 18 hours crating and
shipping
> the thing... I'll just donate it to someone locally!
>
> "c" <c@me.org> wrote in message
> news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
> > If he takes it to a shipping store, he'd be much further ahead to throw
it
> > out in the street. They will bend you over on shipping something like
> that.
> > You might want to look into truck freight on it since it is already
> crated.
> > I recently shipped a grinding machine from Michigan to Oregon. The
weight
> > was over 250 pounds and total shipping cost was $64. It took 6 days to
> > deliver which is actually faster than a UPS package will get there.
> >
> > Chris
> >
> > "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
> > news:1zBnb.122922$gv5.108399@fed1read05...
> > > I hope you are selling it for a bunch. Hehe. All those hours of
> packaging!
> > > What if you take it to a postal store and have them deal with it.
> > > KH
> > >
> > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> > > news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
> crate
> > > for
> > > > it, and never being one to under-build something..... the crate
weighs
> > 63
> > > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> > > ground
> > > > limit. What can I use to ship it that weighs less?
> > > >
> > > > The crate I made was 20 X 22 X 30. The new one can be at least 2
> inches
> > > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
> any
> > > > containers anybody can think of that meet these dimensions and could
> > hold
> > > a
> > > > 108 lb T/C and don't weigh over say 40 pounds ??
> > > >
> > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> > > around
> > > > the grage).. But it was kind of a PIA. Would a rubbermaid or
plastic
> > > > container of some kind be able to do the job?
> > > >
> > > >
> > >
> > >
> >
> >
>
>
palleting or crating, unless the item can't be unloaded without a forklift.
I would check into it, you may be surprised at the cost.
Chris
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:w1Dnb.1064$PV2.87015@news.uswest.net...
> He is paying shipping, but if I have to spend 18 hours crating and
shipping
> the thing... I'll just donate it to someone locally!
>
> "c" <c@me.org> wrote in message
> news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
> > If he takes it to a shipping store, he'd be much further ahead to throw
it
> > out in the street. They will bend you over on shipping something like
> that.
> > You might want to look into truck freight on it since it is already
> crated.
> > I recently shipped a grinding machine from Michigan to Oregon. The
weight
> > was over 250 pounds and total shipping cost was $64. It took 6 days to
> > deliver which is actually faster than a UPS package will get there.
> >
> > Chris
> >
> > "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
> > news:1zBnb.122922$gv5.108399@fed1read05...
> > > I hope you are selling it for a bunch. Hehe. All those hours of
> packaging!
> > > What if you take it to a postal store and have them deal with it.
> > > KH
> > >
> > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> > > news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
> crate
> > > for
> > > > it, and never being one to under-build something..... the crate
weighs
> > 63
> > > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> > > ground
> > > > limit. What can I use to ship it that weighs less?
> > > >
> > > > The crate I made was 20 X 22 X 30. The new one can be at least 2
> inches
> > > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
> any
> > > > containers anybody can think of that meet these dimensions and could
> > hold
> > > a
> > > > 108 lb T/C and don't weigh over say 40 pounds ??
> > > >
> > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> > > around
> > > > the grage).. But it was kind of a PIA. Would a rubbermaid or
plastic
> > > > container of some kind be able to do the job?
> > > >
> > > >
> > >
> > >
> >
> >
>
>
10-28-2003, 06:57 PM
#24
Guest
Posts: n/a
Re: Shipping T/C advice
That's why I suggested the trucking firms. They don't require any special
palleting or crating, unless the item can't be unloaded without a forklift.
I would check into it, you may be surprised at the cost.
Chris
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:w1Dnb.1064$PV2.87015@news.uswest.net...
> He is paying shipping, but if I have to spend 18 hours crating and
shipping
> the thing... I'll just donate it to someone locally!
>
> "c" <c@me.org> wrote in message
> news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
> > If he takes it to a shipping store, he'd be much further ahead to throw
it
> > out in the street. They will bend you over on shipping something like
> that.
> > You might want to look into truck freight on it since it is already
> crated.
> > I recently shipped a grinding machine from Michigan to Oregon. The
weight
> > was over 250 pounds and total shipping cost was $64. It took 6 days to
> > deliver which is actually faster than a UPS package will get there.
> >
> > Chris
> >
> > "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
> > news:1zBnb.122922$gv5.108399@fed1read05...
> > > I hope you are selling it for a bunch. Hehe. All those hours of
> packaging!
> > > What if you take it to a postal store and have them deal with it.
> > > KH
> > >
> > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> > > news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
> crate
> > > for
> > > > it, and never being one to under-build something..... the crate
weighs
> > 63
> > > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> > > ground
> > > > limit. What can I use to ship it that weighs less?
> > > >
> > > > The crate I made was 20 X 22 X 30. The new one can be at least 2
> inches
> > > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
> any
> > > > containers anybody can think of that meet these dimensions and could
> > hold
> > > a
> > > > 108 lb T/C and don't weigh over say 40 pounds ??
> > > >
> > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> > > around
> > > > the grage).. But it was kind of a PIA. Would a rubbermaid or
plastic
> > > > container of some kind be able to do the job?
> > > >
> > > >
> > >
> > >
> >
> >
>
>
palleting or crating, unless the item can't be unloaded without a forklift.
I would check into it, you may be surprised at the cost.
Chris
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:w1Dnb.1064$PV2.87015@news.uswest.net...
> He is paying shipping, but if I have to spend 18 hours crating and
shipping
> the thing... I'll just donate it to someone locally!
>
> "c" <c@me.org> wrote in message
> news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
> > If he takes it to a shipping store, he'd be much further ahead to throw
it
> > out in the street. They will bend you over on shipping something like
> that.
> > You might want to look into truck freight on it since it is already
> crated.
> > I recently shipped a grinding machine from Michigan to Oregon. The
weight
> > was over 250 pounds and total shipping cost was $64. It took 6 days to
> > deliver which is actually faster than a UPS package will get there.
> >
> > Chris
> >
> > "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
> > news:1zBnb.122922$gv5.108399@fed1read05...
> > > I hope you are selling it for a bunch. Hehe. All those hours of
> packaging!
> > > What if you take it to a postal store and have them deal with it.
> > > KH
> > >
> > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> > > news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
> crate
> > > for
> > > > it, and never being one to under-build something..... the crate
weighs
> > 63
> > > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> > > ground
> > > > limit. What can I use to ship it that weighs less?
> > > >
> > > > The crate I made was 20 X 22 X 30. The new one can be at least 2
> inches
> > > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
> any
> > > > containers anybody can think of that meet these dimensions and could
> > hold
> > > a
> > > > 108 lb T/C and don't weigh over say 40 pounds ??
> > > >
> > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> > > around
> > > > the grage).. But it was kind of a PIA. Would a rubbermaid or
plastic
> > > > container of some kind be able to do the job?
> > > >
> > > >
> > >
> > >
> >
> >
>
>
10-28-2003, 06:57 PM
#25
Guest
Posts: n/a
Re: Shipping T/C advice
That's why I suggested the trucking firms. They don't require any special
palleting or crating, unless the item can't be unloaded without a forklift.
I would check into it, you may be surprised at the cost.
Chris
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:w1Dnb.1064$PV2.87015@news.uswest.net...
> He is paying shipping, but if I have to spend 18 hours crating and
shipping
> the thing... I'll just donate it to someone locally!
>
> "c" <c@me.org> wrote in message
> news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
> > If he takes it to a shipping store, he'd be much further ahead to throw
it
> > out in the street. They will bend you over on shipping something like
> that.
> > You might want to look into truck freight on it since it is already
> crated.
> > I recently shipped a grinding machine from Michigan to Oregon. The
weight
> > was over 250 pounds and total shipping cost was $64. It took 6 days to
> > deliver which is actually faster than a UPS package will get there.
> >
> > Chris
> >
> > "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
> > news:1zBnb.122922$gv5.108399@fed1read05...
> > > I hope you are selling it for a bunch. Hehe. All those hours of
> packaging!
> > > What if you take it to a postal store and have them deal with it.
> > > KH
> > >
> > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> > > news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
> crate
> > > for
> > > > it, and never being one to under-build something..... the crate
weighs
> > 63
> > > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> > > ground
> > > > limit. What can I use to ship it that weighs less?
> > > >
> > > > The crate I made was 20 X 22 X 30. The new one can be at least 2
> inches
> > > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
> any
> > > > containers anybody can think of that meet these dimensions and could
> > hold
> > > a
> > > > 108 lb T/C and don't weigh over say 40 pounds ??
> > > >
> > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> > > around
> > > > the grage).. But it was kind of a PIA. Would a rubbermaid or
plastic
> > > > container of some kind be able to do the job?
> > > >
> > > >
> > >
> > >
> >
> >
>
>
palleting or crating, unless the item can't be unloaded without a forklift.
I would check into it, you may be surprised at the cost.
Chris
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:w1Dnb.1064$PV2.87015@news.uswest.net...
> He is paying shipping, but if I have to spend 18 hours crating and
shipping
> the thing... I'll just donate it to someone locally!
>
> "c" <c@me.org> wrote in message
> news:AOCnb.77998$%C5.36703@twister.rdc-kc.rr.com...
> > If he takes it to a shipping store, he'd be much further ahead to throw
it
> > out in the street. They will bend you over on shipping something like
> that.
> > You might want to look into truck freight on it since it is already
> crated.
> > I recently shipped a grinding machine from Michigan to Oregon. The
weight
> > was over 250 pounds and total shipping cost was $64. It took 6 days to
> > deliver which is actually faster than a UPS package will get there.
> >
> > Chris
> >
> > "Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
> > news:1zBnb.122922$gv5.108399@fed1read05...
> > > I hope you are selling it for a bunch. Hehe. All those hours of
> packaging!
> > > What if you take it to a postal store and have them deal with it.
> > > KH
> > >
> > > "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> > > news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > > > I'm selling a NP229 transfer case that weighs 108 lbs. I built a
> crate
> > > for
> > > > it, and never being one to under-build something..... the crate
weighs
> > 63
> > > > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> > > ground
> > > > limit. What can I use to ship it that weighs less?
> > > >
> > > > The crate I made was 20 X 22 X 30. The new one can be at least 2
> inches
> > > > shorter on each side. 18 X 20 X 26 would probably do it. Are there
> any
> > > > containers anybody can think of that meet these dimensions and could
> > hold
> > > a
> > > > 108 lb T/C and don't weigh over say 40 pounds ??
> > > >
> > > > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> > > around
> > > > the grage).. But it was kind of a PIA. Would a rubbermaid or
plastic
> > > > container of some kind be able to do the job?
> > > >
> > > >
> > >
> > >
> >
> >
>
>
10-28-2003, 06:59 PM
#26
Guest
Posts: n/a
Re: Shipping T/C advice
Tupperware!
Stop the laughing, seriously crate it up in one of those large tupperware
containers that have the snapclose lids, and throughly pack it in place with
a combination of cardboard, and newspaper, then tape the lid on securely
with 1000 mile an hour black gaffer type tape, and slap a shipping label on
it.
Of course first check with your shipping company if they will take this. It
shouldnt add more than about 5lbs to the package.
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:ctBnb.1021$Aa6.33506@news.uswest.net...
> I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
for
> it, and never being one to under-build something..... the crate weighs 63
> lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
ground
> limit. What can I use to ship it that weighs less?
>
> The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> containers anybody can think of that meet these dimensions and could hold
a
> 108 lb T/C and don't weigh over say 40 pounds ??
>
> I could build a new crate out of 1 x 1's instead of 2X4's (all I had
around
> the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> container of some kind be able to do the job?
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
Stop the laughing, seriously crate it up in one of those large tupperware
containers that have the snapclose lids, and throughly pack it in place with
a combination of cardboard, and newspaper, then tape the lid on securely
with 1000 mile an hour black gaffer type tape, and slap a shipping label on
it.
Of course first check with your shipping company if they will take this. It
shouldnt add more than about 5lbs to the package.
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:ctBnb.1021$Aa6.33506@news.uswest.net...
> I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
for
> it, and never being one to under-build something..... the crate weighs 63
> lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
ground
> limit. What can I use to ship it that weighs less?
>
> The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> containers anybody can think of that meet these dimensions and could hold
a
> 108 lb T/C and don't weigh over say 40 pounds ??
>
> I could build a new crate out of 1 x 1's instead of 2X4's (all I had
around
> the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> container of some kind be able to do the job?
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
10-28-2003, 06:59 PM
#27
Guest
Posts: n/a
Re: Shipping T/C advice
Tupperware!
Stop the laughing, seriously crate it up in one of those large tupperware
containers that have the snapclose lids, and throughly pack it in place with
a combination of cardboard, and newspaper, then tape the lid on securely
with 1000 mile an hour black gaffer type tape, and slap a shipping label on
it.
Of course first check with your shipping company if they will take this. It
shouldnt add more than about 5lbs to the package.
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:ctBnb.1021$Aa6.33506@news.uswest.net...
> I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
for
> it, and never being one to under-build something..... the crate weighs 63
> lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
ground
> limit. What can I use to ship it that weighs less?
>
> The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> containers anybody can think of that meet these dimensions and could hold
a
> 108 lb T/C and don't weigh over say 40 pounds ??
>
> I could build a new crate out of 1 x 1's instead of 2X4's (all I had
around
> the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> container of some kind be able to do the job?
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
Stop the laughing, seriously crate it up in one of those large tupperware
containers that have the snapclose lids, and throughly pack it in place with
a combination of cardboard, and newspaper, then tape the lid on securely
with 1000 mile an hour black gaffer type tape, and slap a shipping label on
it.
Of course first check with your shipping company if they will take this. It
shouldnt add more than about 5lbs to the package.
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:ctBnb.1021$Aa6.33506@news.uswest.net...
> I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
for
> it, and never being one to under-build something..... the crate weighs 63
> lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
ground
> limit. What can I use to ship it that weighs less?
>
> The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> containers anybody can think of that meet these dimensions and could hold
a
> 108 lb T/C and don't weigh over say 40 pounds ??
>
> I could build a new crate out of 1 x 1's instead of 2X4's (all I had
around
> the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> container of some kind be able to do the job?
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
10-28-2003, 06:59 PM
#28
Guest
Posts: n/a
Re: Shipping T/C advice
Tupperware!
Stop the laughing, seriously crate it up in one of those large tupperware
containers that have the snapclose lids, and throughly pack it in place with
a combination of cardboard, and newspaper, then tape the lid on securely
with 1000 mile an hour black gaffer type tape, and slap a shipping label on
it.
Of course first check with your shipping company if they will take this. It
shouldnt add more than about 5lbs to the package.
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:ctBnb.1021$Aa6.33506@news.uswest.net...
> I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
for
> it, and never being one to under-build something..... the crate weighs 63
> lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
ground
> limit. What can I use to ship it that weighs less?
>
> The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> containers anybody can think of that meet these dimensions and could hold
a
> 108 lb T/C and don't weigh over say 40 pounds ??
>
> I could build a new crate out of 1 x 1's instead of 2X4's (all I had
around
> the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> container of some kind be able to do the job?
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
Stop the laughing, seriously crate it up in one of those large tupperware
containers that have the snapclose lids, and throughly pack it in place with
a combination of cardboard, and newspaper, then tape the lid on securely
with 1000 mile an hour black gaffer type tape, and slap a shipping label on
it.
Of course first check with your shipping company if they will take this. It
shouldnt add more than about 5lbs to the package.
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:ctBnb.1021$Aa6.33506@news.uswest.net...
> I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
for
> it, and never being one to under-build something..... the crate weighs 63
> lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
ground
> limit. What can I use to ship it that weighs less?
>
> The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> containers anybody can think of that meet these dimensions and could hold
a
> 108 lb T/C and don't weigh over say 40 pounds ??
>
> I could build a new crate out of 1 x 1's instead of 2X4's (all I had
around
> the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> container of some kind be able to do the job?
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
10-28-2003, 07:01 PM
#29
Guest
Posts: n/a
Oh yeah....
Oh yeah, if you get the right container it will probably have handles on it
too for the driver to lift it with should he need to.
I store over a hundred lbs of dog food in one, and regularly pick it up and
move it around the house without it collapsing.
"GamePlayer No. 1058" <nospamreader@yahoo.com> wrote in message
news:bnmvtv$12tcm7$1@ID-194553.news.uni-berlin.de...
> Tupperware!
>
> Stop the laughing, seriously crate it up in one of those large tupperware
> containers that have the snapclose lids, and throughly pack it in place
with
> a combination of cardboard, and newspaper, then tape the lid on securely
> with 1000 mile an hour black gaffer type tape, and slap a shipping label
on
> it.
>
> Of course first check with your shipping company if they will take this.
It
> shouldnt add more than about 5lbs to the package.
>
> "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
> for
> > it, and never being one to under-build something..... the crate weighs
63
> > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> ground
> > limit. What can I use to ship it that weighs less?
> >
> > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> > shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> > containers anybody can think of that meet these dimensions and could
hold
> a
> > 108 lb T/C and don't weigh over say 40 pounds ??
> >
> > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> around
> > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> > container of some kind be able to do the job?
> >
> >
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
too for the driver to lift it with should he need to.
I store over a hundred lbs of dog food in one, and regularly pick it up and
move it around the house without it collapsing.
"GamePlayer No. 1058" <nospamreader@yahoo.com> wrote in message
news:bnmvtv$12tcm7$1@ID-194553.news.uni-berlin.de...
> Tupperware!
>
> Stop the laughing, seriously crate it up in one of those large tupperware
> containers that have the snapclose lids, and throughly pack it in place
with
> a combination of cardboard, and newspaper, then tape the lid on securely
> with 1000 mile an hour black gaffer type tape, and slap a shipping label
on
> it.
>
> Of course first check with your shipping company if they will take this.
It
> shouldnt add more than about 5lbs to the package.
>
> "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
> for
> > it, and never being one to under-build something..... the crate weighs
63
> > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> ground
> > limit. What can I use to ship it that weighs less?
> >
> > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> > shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> > containers anybody can think of that meet these dimensions and could
hold
> a
> > 108 lb T/C and don't weigh over say 40 pounds ??
> >
> > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> around
> > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> > container of some kind be able to do the job?
> >
> >
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
10-28-2003, 07:01 PM
#30
Guest
Posts: n/a
Oh yeah....
Oh yeah, if you get the right container it will probably have handles on it
too for the driver to lift it with should he need to.
I store over a hundred lbs of dog food in one, and regularly pick it up and
move it around the house without it collapsing.
"GamePlayer No. 1058" <nospamreader@yahoo.com> wrote in message
news:bnmvtv$12tcm7$1@ID-194553.news.uni-berlin.de...
> Tupperware!
>
> Stop the laughing, seriously crate it up in one of those large tupperware
> containers that have the snapclose lids, and throughly pack it in place
with
> a combination of cardboard, and newspaper, then tape the lid on securely
> with 1000 mile an hour black gaffer type tape, and slap a shipping label
on
> it.
>
> Of course first check with your shipping company if they will take this.
It
> shouldnt add more than about 5lbs to the package.
>
> "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
> for
> > it, and never being one to under-build something..... the crate weighs
63
> > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> ground
> > limit. What can I use to ship it that weighs less?
> >
> > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> > shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> > containers anybody can think of that meet these dimensions and could
hold
> a
> > 108 lb T/C and don't weigh over say 40 pounds ??
> >
> > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> around
> > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> > container of some kind be able to do the job?
> >
> >
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
too for the driver to lift it with should he need to.
I store over a hundred lbs of dog food in one, and regularly pick it up and
move it around the house without it collapsing.
"GamePlayer No. 1058" <nospamreader@yahoo.com> wrote in message
news:bnmvtv$12tcm7$1@ID-194553.news.uni-berlin.de...
> Tupperware!
>
> Stop the laughing, seriously crate it up in one of those large tupperware
> containers that have the snapclose lids, and throughly pack it in place
with
> a combination of cardboard, and newspaper, then tape the lid on securely
> with 1000 mile an hour black gaffer type tape, and slap a shipping label
on
> it.
>
> Of course first check with your shipping company if they will take this.
It
> shouldnt add more than about 5lbs to the package.
>
> "Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
> news:ctBnb.1021$Aa6.33506@news.uswest.net...
> > I'm selling a NP229 transfer case that weighs 108 lbs. I built a crate
> for
> > it, and never being one to under-build something..... the crate weighs
63
> > lbs, which puts it at a combined 171 which is 20 pounds over FedEx's
> ground
> > limit. What can I use to ship it that weighs less?
> >
> > The crate I made was 20 X 22 X 30. The new one can be at least 2 inches
> > shorter on each side. 18 X 20 X 26 would probably do it. Are there any
> > containers anybody can think of that meet these dimensions and could
hold
> a
> > 108 lb T/C and don't weigh over say 40 pounds ??
> >
> > I could build a new crate out of 1 x 1's instead of 2X4's (all I had
> around
> > the grage).. But it was kind of a PIA. Would a rubbermaid or plastic
> > container of some kind be able to do the job?
> >
> >
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/2003