Scrambler soft top instructions.
05-23-2006, 01:17 PM
#1
Guest
Posts: n/a
Scrambler soft top instructions.
Anyone know where I can find setup instructions for what I "think" is a
factory (or factory style) scrambler soft top? Preferably something
with photos so I can see all the hardware involved. I've got a
scrambler and a soft top and some of the hardware seems to be missing.
Nothing that looks like some simple fabrication couldn't replace but I'm
just not real clear on how it all goes together. Some pieces seem to be
more or less no-brainers, but some don't seem to make much sense at all.
Any and all help would be greatly appreciated.
factory (or factory style) scrambler soft top? Preferably something
with photos so I can see all the hardware involved. I've got a
scrambler and a soft top and some of the hardware seems to be missing.
Nothing that looks like some simple fabrication couldn't replace but I'm
just not real clear on how it all goes together. Some pieces seem to be
more or less no-brainers, but some don't seem to make much sense at all.
Any and all help would be greatly appreciated.
05-23-2006, 06:00 PM
#2
Guest
Posts: n/a
Re: Scrambler soft top instructions.
What make is the top? It might be a Witco like the CJ7's, if so I can
give you directions/photos and might even be able to find the setup
measurements for the windshield rake and snaps.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Tom Greening wrote:
>
> Anyone know where I can find setup instructions for what I "think" is a
> factory (or factory style) scrambler soft top? Preferably something
> with photos so I can see all the hardware involved. I've got a
> scrambler and a soft top and some of the hardware seems to be missing.
> Nothing that looks like some simple fabrication couldn't replace but I'm
> just not real clear on how it all goes together. Some pieces seem to be
> more or less no-brainers, but some don't seem to make much sense at all.
> Any and all help would be greatly appreciated.
give you directions/photos and might even be able to find the setup
measurements for the windshield rake and snaps.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Tom Greening wrote:
>
> Anyone know where I can find setup instructions for what I "think" is a
> factory (or factory style) scrambler soft top? Preferably something
> with photos so I can see all the hardware involved. I've got a
> scrambler and a soft top and some of the hardware seems to be missing.
> Nothing that looks like some simple fabrication couldn't replace but I'm
> just not real clear on how it all goes together. Some pieces seem to be
> more or less no-brainers, but some don't seem to make much sense at all.
> Any and all help would be greatly appreciated.
05-23-2006, 06:00 PM
#3
Guest
Posts: n/a
Re: Scrambler soft top instructions.
What make is the top? It might be a Witco like the CJ7's, if so I can
give you directions/photos and might even be able to find the setup
measurements for the windshield rake and snaps.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Tom Greening wrote:
>
> Anyone know where I can find setup instructions for what I "think" is a
> factory (or factory style) scrambler soft top? Preferably something
> with photos so I can see all the hardware involved. I've got a
> scrambler and a soft top and some of the hardware seems to be missing.
> Nothing that looks like some simple fabrication couldn't replace but I'm
> just not real clear on how it all goes together. Some pieces seem to be
> more or less no-brainers, but some don't seem to make much sense at all.
> Any and all help would be greatly appreciated.
give you directions/photos and might even be able to find the setup
measurements for the windshield rake and snaps.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Tom Greening wrote:
>
> Anyone know where I can find setup instructions for what I "think" is a
> factory (or factory style) scrambler soft top? Preferably something
> with photos so I can see all the hardware involved. I've got a
> scrambler and a soft top and some of the hardware seems to be missing.
> Nothing that looks like some simple fabrication couldn't replace but I'm
> just not real clear on how it all goes together. Some pieces seem to be
> more or less no-brainers, but some don't seem to make much sense at all.
> Any and all help would be greatly appreciated.
05-23-2006, 06:00 PM
#4
Guest
Posts: n/a
Re: Scrambler soft top instructions.
What make is the top? It might be a Witco like the CJ7's, if so I can
give you directions/photos and might even be able to find the setup
measurements for the windshield rake and snaps.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Tom Greening wrote:
>
> Anyone know where I can find setup instructions for what I "think" is a
> factory (or factory style) scrambler soft top? Preferably something
> with photos so I can see all the hardware involved. I've got a
> scrambler and a soft top and some of the hardware seems to be missing.
> Nothing that looks like some simple fabrication couldn't replace but I'm
> just not real clear on how it all goes together. Some pieces seem to be
> more or less no-brainers, but some don't seem to make much sense at all.
> Any and all help would be greatly appreciated.
give you directions/photos and might even be able to find the setup
measurements for the windshield rake and snaps.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Tom Greening wrote:
>
> Anyone know where I can find setup instructions for what I "think" is a
> factory (or factory style) scrambler soft top? Preferably something
> with photos so I can see all the hardware involved. I've got a
> scrambler and a soft top and some of the hardware seems to be missing.
> Nothing that looks like some simple fabrication couldn't replace but I'm
> just not real clear on how it all goes together. Some pieces seem to be
> more or less no-brainers, but some don't seem to make much sense at all.
> Any and all help would be greatly appreciated.
05-23-2006, 06:10 PM
#5
Guest
Posts: n/a
Re: Scrambler soft top instructions.
You might try posting in the forums at http://scrambler.cj-8.com/
05-23-2006, 06:10 PM
#6
Guest
Posts: n/a
Re: Scrambler soft top instructions.
You might try posting in the forums at http://scrambler.cj-8.com/
05-23-2006, 06:10 PM
#7
Guest
Posts: n/a
Re: Scrambler soft top instructions.
You might try posting in the forums at http://scrambler.cj-8.com/
05-23-2006, 08:11 PM
#8
Guest
Posts: n/a
Re: Scrambler soft top instructions.
Mike Romain wrote:
> What make is the top? It might be a Witco like the CJ7's, if so I can
> give you directions/photos and might even be able to find the setup
> measurements for the windshield rake and snaps.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
Actually I have no clue Mike. It was with the scrambler when I bought
it, but I never got around to installing it. It's a snap style so I'm
guessing it's of older design, but not factory original. I can't
imagine it would be in such good shape if it was factory. I'm getting
ready to put the scrambler up for sale and I'd really like to have the
soft top functional to go along with the half hard top. If you can
point me to the pics/instructions I can probably figure out pretty quick
if it applies to what I have or not. Thanks for the help on this.
> What make is the top? It might be a Witco like the CJ7's, if so I can
> give you directions/photos and might even be able to find the setup
> measurements for the windshield rake and snaps.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
Actually I have no clue Mike. It was with the scrambler when I bought
it, but I never got around to installing it. It's a snap style so I'm
guessing it's of older design, but not factory original. I can't
imagine it would be in such good shape if it was factory. I'm getting
ready to put the scrambler up for sale and I'd really like to have the
soft top functional to go along with the half hard top. If you can
point me to the pics/instructions I can probably figure out pretty quick
if it applies to what I have or not. Thanks for the help on this.
05-23-2006, 08:11 PM
#9
Guest
Posts: n/a
Re: Scrambler soft top instructions.
Mike Romain wrote:
> What make is the top? It might be a Witco like the CJ7's, if so I can
> give you directions/photos and might even be able to find the setup
> measurements for the windshield rake and snaps.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
Actually I have no clue Mike. It was with the scrambler when I bought
it, but I never got around to installing it. It's a snap style so I'm
guessing it's of older design, but not factory original. I can't
imagine it would be in such good shape if it was factory. I'm getting
ready to put the scrambler up for sale and I'd really like to have the
soft top functional to go along with the half hard top. If you can
point me to the pics/instructions I can probably figure out pretty quick
if it applies to what I have or not. Thanks for the help on this.
> What make is the top? It might be a Witco like the CJ7's, if so I can
> give you directions/photos and might even be able to find the setup
> measurements for the windshield rake and snaps.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
Actually I have no clue Mike. It was with the scrambler when I bought
it, but I never got around to installing it. It's a snap style so I'm
guessing it's of older design, but not factory original. I can't
imagine it would be in such good shape if it was factory. I'm getting
ready to put the scrambler up for sale and I'd really like to have the
soft top functional to go along with the half hard top. If you can
point me to the pics/instructions I can probably figure out pretty quick
if it applies to what I have or not. Thanks for the help on this.
05-23-2006, 08:11 PM
#10
Guest
Posts: n/a
Re: Scrambler soft top instructions.
Mike Romain wrote:
> What make is the top? It might be a Witco like the CJ7's, if so I can
> give you directions/photos and might even be able to find the setup
> measurements for the windshield rake and snaps.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
Actually I have no clue Mike. It was with the scrambler when I bought
it, but I never got around to installing it. It's a snap style so I'm
guessing it's of older design, but not factory original. I can't
imagine it would be in such good shape if it was factory. I'm getting
ready to put the scrambler up for sale and I'd really like to have the
soft top functional to go along with the half hard top. If you can
point me to the pics/instructions I can probably figure out pretty quick
if it applies to what I have or not. Thanks for the help on this.
> What make is the top? It might be a Witco like the CJ7's, if so I can
> give you directions/photos and might even be able to find the setup
> measurements for the windshield rake and snaps.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
Actually I have no clue Mike. It was with the scrambler when I bought
it, but I never got around to installing it. It's a snap style so I'm
guessing it's of older design, but not factory original. I can't
imagine it would be in such good shape if it was factory. I'm getting
ready to put the scrambler up for sale and I'd really like to have the
soft top functional to go along with the half hard top. If you can
point me to the pics/instructions I can probably figure out pretty quick
if it applies to what I have or not. Thanks for the help on this.
