Stupendous Man

I have a scout Dana 44 in the rear on my Jeepster that came out of a 64
Scout, but that axle wasn't made til 67 or so.
Does anyone have data to identify it base on it's numbers?
4 3 903 603101 4
I am going to look for a front 44, and want to get the same width/series
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

Your width should be the same 51" as a Real Kaiser Civilian Jeep,
at least we just took that ugly hood off and put a real hood on in
place.

Jefe's year-by-year description of INTERNATIONAL SCOUT Axles
Starting with the appearance of Dana 44:
1967 Scout 800: rr axle, Dana 44 track: 55.1" ratios: 3.73/4.27/4.88
1968 Scout 800: rr axle, Dana 44 track: 53.875.1" ratios: 4.27/4.88
1969 Scout 800A: rr axle, Dana 44 track: 55.7" ratios: 3.31/3.73/4..27
1970 Scout 800A: rr axle, Dana 44 track: 55.7" ratios: 3.31/3.73/4..27
1971 ScoutII 800B: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
1972 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
1973 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
front axle, Dana 44 (option w/V8) track: 57.1: ratios: 3.31/3.73/4.27
1974 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
front axle, Dana 44 (option/V8/Disc) track: 57.1" ratios: 3.31/3.73/4.27
1975 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 4.09/opt:
3.07/3.54
front axle, Dana 44 stock w/ disc track: 57.1"
1976 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 4.09/opt:
3.07/3.54
front axle, Dana 44 stock w/ disc track: 57.1"
1977 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 4.09/opt:
3.07/3.54
front axle, Dana 44 stock w/ disc track: 57.1"

1978 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.54 V8w3 and
wide 4 spd. manual trans. 3.07w/ 4 spd close and auto trans. 4.09
w/diesel wide. : 3.73w/diesel close ratio 4spd. Opt: 3.54/3.73/4.09
frnt axle, Dana 44 stock w/ disc track: 57.1"

1979 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.54 V8w3 and
wide 4 spd. manual trans. 3.07w/ 4 spd close and auto trans. 4.09
w/diesel wide. : 3.73w/diesel close ratio 4spd. Opt: 3.54/3.73/4.09
frnt axle, Dana 44 stock w/ disc track: 57.1"

1980 ScoutII 800C; rr axle, Dana 44 track: 57.62" ratios: V8: 2.73 or
3.31. opt. w/V8: 3.54. Towingpkg: 345-V8/3.73. Diesel: 3.73, 3.54opt.
frnt axle, Dana 44 stock w/ disc track: 58.5"

All front Dana 44's were of the open Cardigan design. All rear Dana 44
axles were semi floating in design. Notice the 1967 through 1970 axles
the width was very close to the wide track Jeep CJ axles of the 1981-86
eara All axles listed are of the 5 on 5.5" lug pattern.
regards, as always, jefe

God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Stupendous Man wrote:
>
> I have a scout Dana 44 in the rear on my Jeepster that came out of a 64
> Scout, but that axle wasn't made til 67 or so.
> Does anyone have data to identify it base on it's numbers?
> 4 3 903 603101 4
> I am going to look for a front 44, and want to get the same width/series
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

Your width should be the same 51" as a Real Kaiser Civilian Jeep,
at least we just took that ugly hood off and put a real hood on in
place.

Jefe's year-by-year description of INTERNATIONAL SCOUT Axles
Starting with the appearance of Dana 44:
1967 Scout 800: rr axle, Dana 44 track: 55.1" ratios: 3.73/4.27/4.88
1968 Scout 800: rr axle, Dana 44 track: 53.875.1" ratios: 4.27/4.88
1969 Scout 800A: rr axle, Dana 44 track: 55.7" ratios: 3.31/3.73/4..27
1970 Scout 800A: rr axle, Dana 44 track: 55.7" ratios: 3.31/3.73/4..27
1971 ScoutII 800B: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
1972 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
1973 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
front axle, Dana 44 (option w/V8) track: 57.1: ratios: 3.31/3.73/4.27
1974 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
front axle, Dana 44 (option/V8/Disc) track: 57.1" ratios: 3.31/3.73/4.27
1975 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 4.09/opt:
3.07/3.54
front axle, Dana 44 stock w/ disc track: 57.1"
1976 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 4.09/opt:
3.07/3.54
front axle, Dana 44 stock w/ disc track: 57.1"
1977 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 4.09/opt:
3.07/3.54
front axle, Dana 44 stock w/ disc track: 57.1"

1978 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.54 V8w3 and
wide 4 spd. manual trans. 3.07w/ 4 spd close and auto trans. 4.09
w/diesel wide. : 3.73w/diesel close ratio 4spd. Opt: 3.54/3.73/4.09
frnt axle, Dana 44 stock w/ disc track: 57.1"

1979 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.54 V8w3 and
wide 4 spd. manual trans. 3.07w/ 4 spd close and auto trans. 4.09
w/diesel wide. : 3.73w/diesel close ratio 4spd. Opt: 3.54/3.73/4.09
frnt axle, Dana 44 stock w/ disc track: 57.1"

1980 ScoutII 800C; rr axle, Dana 44 track: 57.62" ratios: V8: 2.73 or
3.31. opt. w/V8: 3.54. Towingpkg: 345-V8/3.73. Diesel: 3.73, 3.54opt.
frnt axle, Dana 44 stock w/ disc track: 58.5"

All front Dana 44's were of the open Cardigan design. All rear Dana 44
axles were semi floating in design. Notice the 1967 through 1970 axles
the width was very close to the wide track Jeep CJ axles of the 1981-86
eara All axles listed are of the 5 on 5.5" lug pattern.
regards, as always, jefe

God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Stupendous Man wrote:
>
> I have a scout Dana 44 in the rear on my Jeepster that came out of a 64
> Scout, but that axle wasn't made til 67 or so.
> Does anyone have data to identify it base on it's numbers?
> 4 3 903 603101 4
> I am going to look for a front 44, and want to get the same width/series
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

Your width should be the same 51" as a Real Kaiser Civilian Jeep,
at least we just took that ugly hood off and put a real hood on in
place.

Jefe's year-by-year description of INTERNATIONAL SCOUT Axles
Starting with the appearance of Dana 44:
1967 Scout 800: rr axle, Dana 44 track: 55.1" ratios: 3.73/4.27/4.88
1968 Scout 800: rr axle, Dana 44 track: 53.875.1" ratios: 4.27/4.88
1969 Scout 800A: rr axle, Dana 44 track: 55.7" ratios: 3.31/3.73/4..27
1970 Scout 800A: rr axle, Dana 44 track: 55.7" ratios: 3.31/3.73/4..27
1971 ScoutII 800B: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
1972 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
1973 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
front axle, Dana 44 (option w/V8) track: 57.1: ratios: 3.31/3.73/4.27
1974 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.31/3.73/4.27
front axle, Dana 44 (option/V8/Disc) track: 57.1" ratios: 3.31/3.73/4.27
1975 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 4.09/opt:
3.07/3.54
front axle, Dana 44 stock w/ disc track: 57.1"
1976 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 4.09/opt:
3.07/3.54
front axle, Dana 44 stock w/ disc track: 57.1"
1977 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 4.09/opt:
3.07/3.54
front axle, Dana 44 stock w/ disc track: 57.1"

1978 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.54 V8w3 and
wide 4 spd. manual trans. 3.07w/ 4 spd close and auto trans. 4.09
w/diesel wide. : 3.73w/diesel close ratio 4spd. Opt: 3.54/3.73/4.09
frnt axle, Dana 44 stock w/ disc track: 57.1"

1979 ScoutII 800C: rr axle, Dana 44 track: 57.1" ratios: 3.54 V8w3 and
wide 4 spd. manual trans. 3.07w/ 4 spd close and auto trans. 4.09
w/diesel wide. : 3.73w/diesel close ratio 4spd. Opt: 3.54/3.73/4.09
frnt axle, Dana 44 stock w/ disc track: 57.1"

1980 ScoutII 800C; rr axle, Dana 44 track: 57.62" ratios: V8: 2.73 or
3.31. opt. w/V8: 3.54. Towingpkg: 345-V8/3.73. Diesel: 3.73, 3.54opt.
frnt axle, Dana 44 stock w/ disc track: 58.5"

All front Dana 44's were of the open Cardigan design. All rear Dana 44
axles were semi floating in design. Notice the 1967 through 1970 axles
the width was very close to the wide track Jeep CJ axles of the 1981-86
eara All axles listed are of the 5 on 5.5" lug pattern.
regards, as always, jefe

God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Stupendous Man wrote:
>
> I have a scout Dana 44 in the rear on my Jeepster that came out of a 64
> Scout, but that axle wasn't made til 67 or so.
> Does anyone have data to identify it base on it's numbers?
> 4 3 903 603101 4
> I am going to look for a front 44, and want to get the same width/series
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty

Stupendous Man

Thanks, Bill. I found that, and dana has a site that reads the build number,
but not international, and not before 79.


--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

Stupendous Man

Thanks, Bill. I found that, and dana has a site that reads the build number,
but not international, and not before 79.


--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

Stupendous Man

Thanks, Bill. I found that, and dana has a site that reads the build number,
but not international, and not before 79.


--
Stupendous Man,
Defender of Freedom, Advocate of Liberty