ring & pinion swap question
04-25-2004, 12:12 PM
#2
Guest
Posts: n/a
Re: ring & pinion swap question
A simple review of the manufacturers repair manual should do the trick. Be
advised, this is a very tricky operation that can, but shouldn't, be done by
the backyard mechanic. Technically it's a piece of cake, however in actual
practice it can be a complete PITA unless you have a lift, hydraulic press,
case ------er, magnetic base & dial indicator, etc., plus a lot of patience.
Set it up wrong and you'll have a pile of scrap in short order, like less
than 500 miles.
Set them up wrong and
"Jet" <jet@bestweb.net> wrote in message
news:108n62onb06rmc6@corp.supernews.com...
> where can I find a website with some detailed literature on doing a ring
and
> pinion change on a Dana 30 and a amc 20 in a 86 cj7. and if not a website
> maybe a book. thanks carmine
>
>
advised, this is a very tricky operation that can, but shouldn't, be done by
the backyard mechanic. Technically it's a piece of cake, however in actual
practice it can be a complete PITA unless you have a lift, hydraulic press,
case ------er, magnetic base & dial indicator, etc., plus a lot of patience.
Set it up wrong and you'll have a pile of scrap in short order, like less
than 500 miles.
Set them up wrong and
"Jet" <jet@bestweb.net> wrote in message
news:108n62onb06rmc6@corp.supernews.com...
> where can I find a website with some detailed literature on doing a ring
and
> pinion change on a Dana 30 and a amc 20 in a 86 cj7. and if not a website
> maybe a book. thanks carmine
>
>
04-25-2004, 12:12 PM
#3
Guest
Posts: n/a
Re: ring & pinion swap question
A simple review of the manufacturers repair manual should do the trick. Be
advised, this is a very tricky operation that can, but shouldn't, be done by
the backyard mechanic. Technically it's a piece of cake, however in actual
practice it can be a complete PITA unless you have a lift, hydraulic press,
case ------er, magnetic base & dial indicator, etc., plus a lot of patience.
Set it up wrong and you'll have a pile of scrap in short order, like less
than 500 miles.
Set them up wrong and
"Jet" <jet@bestweb.net> wrote in message
news:108n62onb06rmc6@corp.supernews.com...
> where can I find a website with some detailed literature on doing a ring
and
> pinion change on a Dana 30 and a amc 20 in a 86 cj7. and if not a website
> maybe a book. thanks carmine
>
>
advised, this is a very tricky operation that can, but shouldn't, be done by
the backyard mechanic. Technically it's a piece of cake, however in actual
practice it can be a complete PITA unless you have a lift, hydraulic press,
case ------er, magnetic base & dial indicator, etc., plus a lot of patience.
Set it up wrong and you'll have a pile of scrap in short order, like less
than 500 miles.
Set them up wrong and
"Jet" <jet@bestweb.net> wrote in message
news:108n62onb06rmc6@corp.supernews.com...
> where can I find a website with some detailed literature on doing a ring
and
> pinion change on a Dana 30 and a amc 20 in a 86 cj7. and if not a website
> maybe a book. thanks carmine
>
>
04-25-2004, 12:12 PM
#4
Guest
Posts: n/a
Re: ring & pinion swap question
A simple review of the manufacturers repair manual should do the trick. Be
advised, this is a very tricky operation that can, but shouldn't, be done by
the backyard mechanic. Technically it's a piece of cake, however in actual
practice it can be a complete PITA unless you have a lift, hydraulic press,
case ------er, magnetic base & dial indicator, etc., plus a lot of patience.
Set it up wrong and you'll have a pile of scrap in short order, like less
than 500 miles.
Set them up wrong and
"Jet" <jet@bestweb.net> wrote in message
news:108n62onb06rmc6@corp.supernews.com...
> where can I find a website with some detailed literature on doing a ring
and
> pinion change on a Dana 30 and a amc 20 in a 86 cj7. and if not a website
> maybe a book. thanks carmine
>
>
advised, this is a very tricky operation that can, but shouldn't, be done by
the backyard mechanic. Technically it's a piece of cake, however in actual
practice it can be a complete PITA unless you have a lift, hydraulic press,
case ------er, magnetic base & dial indicator, etc., plus a lot of patience.
Set it up wrong and you'll have a pile of scrap in short order, like less
than 500 miles.
Set them up wrong and
"Jet" <jet@bestweb.net> wrote in message
news:108n62onb06rmc6@corp.supernews.com...
> where can I find a website with some detailed literature on doing a ring
and
> pinion change on a Dana 30 and a amc 20 in a 86 cj7. and if not a website
> maybe a book. thanks carmine
>
>
04-25-2004, 12:12 PM
#5
Guest
Posts: n/a
Re: ring & pinion swap question
A simple review of the manufacturers repair manual should do the trick. Be
advised, this is a very tricky operation that can, but shouldn't, be done by
the backyard mechanic. Technically it's a piece of cake, however in actual
practice it can be a complete PITA unless you have a lift, hydraulic press,
case ------er, magnetic base & dial indicator, etc., plus a lot of patience.
Set it up wrong and you'll have a pile of scrap in short order, like less
than 500 miles.
Set them up wrong and
"Jet" <jet@bestweb.net> wrote in message
news:108n62onb06rmc6@corp.supernews.com...
> where can I find a website with some detailed literature on doing a ring
and
> pinion change on a Dana 30 and a amc 20 in a 86 cj7. and if not a website
> maybe a book. thanks carmine
>
>
advised, this is a very tricky operation that can, but shouldn't, be done by
the backyard mechanic. Technically it's a piece of cake, however in actual
practice it can be a complete PITA unless you have a lift, hydraulic press,
case ------er, magnetic base & dial indicator, etc., plus a lot of patience.
Set it up wrong and you'll have a pile of scrap in short order, like less
than 500 miles.
Set them up wrong and
"Jet" <jet@bestweb.net> wrote in message
news:108n62onb06rmc6@corp.supernews.com...
> where can I find a website with some detailed literature on doing a ring
and
> pinion change on a Dana 30 and a amc 20 in a 86 cj7. and if not a website
> maybe a book. thanks carmine
>
>
04-25-2004, 02:48 PM
#6
Guest
Posts: n/a
Re: ring & pinion swap question
http://www.drivetrain.com/ringpinioninstal.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
04-25-2004, 02:48 PM
#7
Guest
Posts: n/a
Re: ring & pinion swap question
http://www.drivetrain.com/ringpinioninstal.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
04-25-2004, 02:48 PM
#8
Guest
Posts: n/a
Re: ring & pinion swap question
http://www.drivetrain.com/ringpinioninstal.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
04-25-2004, 02:48 PM
#9
Guest
Posts: n/a
Re: ring & pinion swap question
http://www.drivetrain.com/ringpinioninstal.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Thread
Thread Starter
Forum
Replies
Last Post
Morris4x4Center
Morris 4x4 Center
0
02-18-2013 10:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)