Rig weight - why worry?
09-21-2003, 04:35 PM
#91
Guest
Posts: n/a
Re: Rig weight - why worry?
Lon Stowell wrote:
> Approximately 9/21/03 12:46, Cal Wheeler uttered for posterity:
>
>
>>@c0mca$t.net wrote:
>>
>>
>>>Approximately 9/19/03 21:20, Cal Wheeler uttered for posterity:
>>>
>>>
>>>
>>>>Lon Stowell wrote:
>>>>
>>>>
>>>>
>>>>>Approximately 9/18/03 20:47, Cal Wheeler uttered for posterity:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Mike Romain wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Ya I was wondering too.
>>>>>>>
>>>>>>>Every time this poor Joshua guy makes a post that Troll Cal Wheeler is
>>>>>>>all over him trying to start a fight.
>>>>>>>
>>>>>>>We don't need guys like Cal in this NG.
>>>>>>
>>>>>>We don't need guys like you in here either.
>>>>>>
>>>>>
>>>>> Actually we *do* need guys like Mike Romain here. Very
>>>>> valuable source of Jeep information, easily verified by
>>>>> the most cursory of reading.
>>>>>
>>>>
>>>>I agree he's got a wealth of Jeep knowledge. He's also got a short fuse,
>>>>and can't take what he dishes out.
>>>
>>>
>>> I have a much shorter fuse than Mike Romain and probably
>>> not one tenth the jeep knowledge.
>>>
>>>
>>
>>What kind of rig are you driving?
>>
>
> To be honest, it is none of your business, why?
Because it's a Jeep newsgroup, Lon. And because he said he would answer
any Jeep related question he knew the answer to. Thanks for your
interest, though!
>
> Approximately 9/21/03 12:46, Cal Wheeler uttered for posterity:
>
>
>>@c0mca$t.net wrote:
>>
>>
>>>Approximately 9/19/03 21:20, Cal Wheeler uttered for posterity:
>>>
>>>
>>>
>>>>Lon Stowell wrote:
>>>>
>>>>
>>>>
>>>>>Approximately 9/18/03 20:47, Cal Wheeler uttered for posterity:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Mike Romain wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Ya I was wondering too.
>>>>>>>
>>>>>>>Every time this poor Joshua guy makes a post that Troll Cal Wheeler is
>>>>>>>all over him trying to start a fight.
>>>>>>>
>>>>>>>We don't need guys like Cal in this NG.
>>>>>>
>>>>>>We don't need guys like you in here either.
>>>>>>
>>>>>
>>>>> Actually we *do* need guys like Mike Romain here. Very
>>>>> valuable source of Jeep information, easily verified by
>>>>> the most cursory of reading.
>>>>>
>>>>
>>>>I agree he's got a wealth of Jeep knowledge. He's also got a short fuse,
>>>>and can't take what he dishes out.
>>>
>>>
>>> I have a much shorter fuse than Mike Romain and probably
>>> not one tenth the jeep knowledge.
>>>
>>>
>>
>>What kind of rig are you driving?
>>
>
> To be honest, it is none of your business, why?
Because it's a Jeep newsgroup, Lon. And because he said he would answer
any Jeep related question he knew the answer to. Thanks for your
interest, though!
>
09-21-2003, 04:55 PM
#94
Guest
Posts: n/a
Re: Rig weight - why worry?
Jerry Bransford wrote:
> Some people are less tolerant of fools and BS than others... Mike is
> tolerant up to a point, about the same point I am.
Do you have a goal in mind with this? I hope it isn't to extend this
flame war. My goal is to get back to talking about Jeeps. I'm going to
publicly apologize...once...for getting everybody worked up into a tizzy
about...you know. So, everybody, I'm sorry. Lots of people are saying to
move on, and I intend to take that advice. I advise others to do the same.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkkv5r$ftr$1@pita.alt.net...
>
>>@c0mca$t.net wrote:
>>
>>
>>>Approximately 9/19/03 21:20, Cal Wheeler uttered for posterity:
>>>
>>>
>>>
>>>>Lon Stowell wrote:
>>>>
>>>>
>>>>
>>>>>Approximately 9/18/03 20:47, Cal Wheeler uttered for posterity:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Mike Romain wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Ya I was wondering too.
>>>>>>>
>>>>>>>Every time this poor Joshua guy makes a post that Troll Cal Wheeler
>
> is
>
>>>>>>>all over him trying to start a fight.
>>>>>>>
>>>>>>>We don't need guys like Cal in this NG.
>>>>>>
>>>>>>We don't need guys like you in here either.
>>>>>>
>>>>>
>>>>> Actually we *do* need guys like Mike Romain here. Very
>>>>> valuable source of Jeep information, easily verified by
>>>>> the most cursory of reading.
>>>>>
>>>>
>>>>I agree he's got a wealth of Jeep knowledge. He's also got a short fuse,
>>>>and can't take what he dishes out.
>>>
>>>
>>> I have a much shorter fuse than Mike Romain and probably
>>> not one tenth the jeep knowledge.
>>>
>>>
>>
>>What kind of rig are you driving?
>>
>
>
>
> Some people are less tolerant of fools and BS than others... Mike is
> tolerant up to a point, about the same point I am.
Do you have a goal in mind with this? I hope it isn't to extend this
flame war. My goal is to get back to talking about Jeeps. I'm going to
publicly apologize...once...for getting everybody worked up into a tizzy
about...you know. So, everybody, I'm sorry. Lots of people are saying to
move on, and I intend to take that advice. I advise others to do the same.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkkv5r$ftr$1@pita.alt.net...
>
>>@c0mca$t.net wrote:
>>
>>
>>>Approximately 9/19/03 21:20, Cal Wheeler uttered for posterity:
>>>
>>>
>>>
>>>>Lon Stowell wrote:
>>>>
>>>>
>>>>
>>>>>Approximately 9/18/03 20:47, Cal Wheeler uttered for posterity:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Mike Romain wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Ya I was wondering too.
>>>>>>>
>>>>>>>Every time this poor Joshua guy makes a post that Troll Cal Wheeler
>
> is
>
>>>>>>>all over him trying to start a fight.
>>>>>>>
>>>>>>>We don't need guys like Cal in this NG.
>>>>>>
>>>>>>We don't need guys like you in here either.
>>>>>>
>>>>>
>>>>> Actually we *do* need guys like Mike Romain here. Very
>>>>> valuable source of Jeep information, easily verified by
>>>>> the most cursory of reading.
>>>>>
>>>>
>>>>I agree he's got a wealth of Jeep knowledge. He's also got a short fuse,
>>>>and can't take what he dishes out.
>>>
>>>
>>> I have a much shorter fuse than Mike Romain and probably
>>> not one tenth the jeep knowledge.
>>>
>>>
>>
>>What kind of rig are you driving?
>>
>
>
>
09-21-2003, 04:55 PM
#95
Guest
Posts: n/a
Re: Rig weight - why worry?
Jerry Bransford wrote:
> Some people are less tolerant of fools and BS than others... Mike is
> tolerant up to a point, about the same point I am.
Do you have a goal in mind with this? I hope it isn't to extend this
flame war. My goal is to get back to talking about Jeeps. I'm going to
publicly apologize...once...for getting everybody worked up into a tizzy
about...you know. So, everybody, I'm sorry. Lots of people are saying to
move on, and I intend to take that advice. I advise others to do the same.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkkv5r$ftr$1@pita.alt.net...
>
>>@c0mca$t.net wrote:
>>
>>
>>>Approximately 9/19/03 21:20, Cal Wheeler uttered for posterity:
>>>
>>>
>>>
>>>>Lon Stowell wrote:
>>>>
>>>>
>>>>
>>>>>Approximately 9/18/03 20:47, Cal Wheeler uttered for posterity:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Mike Romain wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Ya I was wondering too.
>>>>>>>
>>>>>>>Every time this poor Joshua guy makes a post that Troll Cal Wheeler
>
> is
>
>>>>>>>all over him trying to start a fight.
>>>>>>>
>>>>>>>We don't need guys like Cal in this NG.
>>>>>>
>>>>>>We don't need guys like you in here either.
>>>>>>
>>>>>
>>>>> Actually we *do* need guys like Mike Romain here. Very
>>>>> valuable source of Jeep information, easily verified by
>>>>> the most cursory of reading.
>>>>>
>>>>
>>>>I agree he's got a wealth of Jeep knowledge. He's also got a short fuse,
>>>>and can't take what he dishes out.
>>>
>>>
>>> I have a much shorter fuse than Mike Romain and probably
>>> not one tenth the jeep knowledge.
>>>
>>>
>>
>>What kind of rig are you driving?
>>
>
>
>
> Some people are less tolerant of fools and BS than others... Mike is
> tolerant up to a point, about the same point I am.
Do you have a goal in mind with this? I hope it isn't to extend this
flame war. My goal is to get back to talking about Jeeps. I'm going to
publicly apologize...once...for getting everybody worked up into a tizzy
about...you know. So, everybody, I'm sorry. Lots of people are saying to
move on, and I intend to take that advice. I advise others to do the same.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkkv5r$ftr$1@pita.alt.net...
>
>>@c0mca$t.net wrote:
>>
>>
>>>Approximately 9/19/03 21:20, Cal Wheeler uttered for posterity:
>>>
>>>
>>>
>>>>Lon Stowell wrote:
>>>>
>>>>
>>>>
>>>>>Approximately 9/18/03 20:47, Cal Wheeler uttered for posterity:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Mike Romain wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Ya I was wondering too.
>>>>>>>
>>>>>>>Every time this poor Joshua guy makes a post that Troll Cal Wheeler
>
> is
>
>>>>>>>all over him trying to start a fight.
>>>>>>>
>>>>>>>We don't need guys like Cal in this NG.
>>>>>>
>>>>>>We don't need guys like you in here either.
>>>>>>
>>>>>
>>>>> Actually we *do* need guys like Mike Romain here. Very
>>>>> valuable source of Jeep information, easily verified by
>>>>> the most cursory of reading.
>>>>>
>>>>
>>>>I agree he's got a wealth of Jeep knowledge. He's also got a short fuse,
>>>>and can't take what he dishes out.
>>>
>>>
>>> I have a much shorter fuse than Mike Romain and probably
>>> not one tenth the jeep knowledge.
>>>
>>>
>>
>>What kind of rig are you driving?
>>
>
>
>
09-21-2003, 05:50 PM
#96
Guest
Posts: n/a
Re: Rig weight - why worry?
Jerry Bransford wrote:
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkl2a7$opn$0@pita.alt.net...
>
>>Jerry Bransford wrote:
>>
>>
>>>How old are you Cal?
>>>
>>
>>That data is provided to qualified personnel on a need-to-know basis,
>>Jerry. However, I *can* tell you that my YJ is a '94 model!
>
>
> I never expected a real answer on that,
Of course not. That's because your question was pure flame bait. Set up
to provide an insult, no matter what the answer. However, I think I can
find it in my heart to forgive you, someday. ;-)
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkl2a7$opn$0@pita.alt.net...
>
>>Jerry Bransford wrote:
>>
>>
>>>How old are you Cal?
>>>
>>
>>That data is provided to qualified personnel on a need-to-know basis,
>>Jerry. However, I *can* tell you that my YJ is a '94 model!
>
>
> I never expected a real answer on that,
Of course not. That's because your question was pure flame bait. Set up
to provide an insult, no matter what the answer. However, I think I can
find it in my heart to forgive you, someday. ;-)
09-21-2003, 05:50 PM
#97
Guest
Posts: n/a
Re: Rig weight - why worry?
Jerry Bransford wrote:
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkl2a7$opn$0@pita.alt.net...
>
>>Jerry Bransford wrote:
>>
>>
>>>How old are you Cal?
>>>
>>
>>That data is provided to qualified personnel on a need-to-know basis,
>>Jerry. However, I *can* tell you that my YJ is a '94 model!
>
>
> I never expected a real answer on that,
Of course not. That's because your question was pure flame bait. Set up
to provide an insult, no matter what the answer. However, I think I can
find it in my heart to forgive you, someday. ;-)
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkl2a7$opn$0@pita.alt.net...
>
>>Jerry Bransford wrote:
>>
>>
>>>How old are you Cal?
>>>
>>
>>That data is provided to qualified personnel on a need-to-know basis,
>>Jerry. However, I *can* tell you that my YJ is a '94 model!
>
>
> I never expected a real answer on that,
Of course not. That's because your question was pure flame bait. Set up
to provide an insult, no matter what the answer. However, I think I can
find it in my heart to forgive you, someday. ;-)
09-21-2003, 05:52 PM
#98
Guest
Posts: n/a
Re: Rig weight - why worry?
Nathan W. Collier wrote:
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkl37j$qu5$0@pita.alt.net...
>
>>My goal is to get back to talking about Jeeps. I'm going to
>>publicly apologize...once...for getting everybody worked up into a tizzy
>>about...you know. So, everybody, I'm sorry.
>
>
> awesome brother.
>
> i learned something new today. i had no idea that yj's used a cps or pcm.
> live and learn.....jeeps. :-)
>
Dope that I am, I don't even know what those are! PCM in radio control
means Pulse Code Modulated. Am I close?
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkl37j$qu5$0@pita.alt.net...
>
>>My goal is to get back to talking about Jeeps. I'm going to
>>publicly apologize...once...for getting everybody worked up into a tizzy
>>about...you know. So, everybody, I'm sorry.
>
>
> awesome brother.
>
> i learned something new today. i had no idea that yj's used a cps or pcm.
> live and learn.....jeeps. :-)
>
Dope that I am, I don't even know what those are! PCM in radio control
means Pulse Code Modulated. Am I close?
09-21-2003, 05:52 PM
#99
Guest
Posts: n/a
Re: Rig weight - why worry?
Nathan W. Collier wrote:
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkl37j$qu5$0@pita.alt.net...
>
>>My goal is to get back to talking about Jeeps. I'm going to
>>publicly apologize...once...for getting everybody worked up into a tizzy
>>about...you know. So, everybody, I'm sorry.
>
>
> awesome brother.
>
> i learned something new today. i had no idea that yj's used a cps or pcm.
> live and learn.....jeeps. :-)
>
Dope that I am, I don't even know what those are! PCM in radio control
means Pulse Code Modulated. Am I close?
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkl37j$qu5$0@pita.alt.net...
>
>>My goal is to get back to talking about Jeeps. I'm going to
>>publicly apologize...once...for getting everybody worked up into a tizzy
>>about...you know. So, everybody, I'm sorry.
>
>
> awesome brother.
>
> i learned something new today. i had no idea that yj's used a cps or pcm.
> live and learn.....jeeps. :-)
>
Dope that I am, I don't even know what those are! PCM in radio control
means Pulse Code Modulated. Am I close?
09-21-2003, 07:36 PM
#100
Guest
Posts: n/a
Re: Rig weight - why worry?
Approximately 9/21/03 13:35, Cal Wheeler uttered for posterity:
>>>What kind of rig are you driving?
>>>
>>
>> To be honest, it is none of your business, why?
>
> Because it's a Jeep newsgroup, Lon. And because he said he would answer
> any Jeep related question he knew the answer to. Thanks for your
> interest, though!
>>
>
Hey Cal, no sh*t Sherlock. Why if you could pull your eyes up
from your crotch and look at the newsgroup name, it says "jeep"
right up there. Golleeee, we just can't put anything past you
can we. Bet you didn't know that the group was started by
Governor Candidate, Gary Coleman, to discuss Jeeps and ******,
did ya.
Now, do *YOU* have anything intelligent to ask/say about Jeeps, or
are you going to continue your cyberflatulence?
>>>What kind of rig are you driving?
>>>
>>
>> To be honest, it is none of your business, why?
>
> Because it's a Jeep newsgroup, Lon. And because he said he would answer
> any Jeep related question he knew the answer to. Thanks for your
> interest, though!
>>
>
Hey Cal, no sh*t Sherlock. Why if you could pull your eyes up
from your crotch and look at the newsgroup name, it says "jeep"
right up there. Golleeee, we just can't put anything past you
can we. Bet you didn't know that the group was started by
Governor Candidate, Gary Coleman, to discuss Jeeps and ******,
did ya.
Now, do *YOU* have anything intelligent to ask/say about Jeeps, or
are you going to continue your cyberflatulence?
