Nouma

On Jul 4, 9:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> Comboverfish wrote:
> > On Jul 4, 1:37 pm, Mike Romain <roma...@sympatico.ca> wrote:
> >> You were told on the first crosspost how to look them up yourself.
>
> > Oh, was "Do a "google" on "National Automotive Door, Hood, Trunk and
> > Liftgate Hinge
> > Museum and Archives"" a serious reply? Or did I miss the reply you
> > are referring to?
>
> > I really don't know and am being serious here.
>
> > Toyota MDT in MO
>
> Sure sounded legit to me....
>
> Also sounds like some kid wanting his homework done for him....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)


The "kid" has already been calling all major actors of the hinge
industry and been able to map about 90% of the technologies used in
the European Market.

Unfortunately, I cannot afford to go to the US to find it out by
myself.

Further more, it is very difficult to have some contacts on the car
maker side and though I past the last 2 weeks calling to European car
makers, I only reached a couple of people that were able to slightly
help me.

Earle Horton

A massive cross-posting to groups that are likely to be composed of drivers
of vehicles of various makes and models is likely to prove futile.

I have some really interesting copper-plated steel or iron hinges, that look
as if they might have been plated first, and then forged by hand. Doors in
an 1890s vintage Victorian house in Silverton, CO. It is amazing that a
blacksmith could do.

Saludos cordiales,
Schönen Gruß,
Saúde,

Earle

"Nouma" <emma.serres@gmail.com> wrote in message
news:1183576658.685297.56900@r34g2000hsd.googlegro ups.com...
> On Jul 4, 9:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > Comboverfish wrote:
> > > On Jul 4, 1:37 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > >> You were told on the first crosspost how to look them up yourself.
> >
> > > Oh, was "Do a "google" on "National Automotive Door, Hood, Trunk and
> > > Liftgate Hinge
> > > Museum and Archives"" a serious reply? Or did I miss the reply you
> > > are referring to?
> >
> > > I really don't know and am being serious here.
> >
> > > Toyota MDT in MO
> >
> > Sure sounded legit to me....
> >
> > Also sounds like some kid wanting his homework done for him....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> > (More Off Road album links at bottom of the view page)
>
>
> The "kid" has already been calling all major actors of the hinge
> industry and been able to map about 90% of the technologies used in
> the European Market.
>
> Unfortunately, I cannot afford to go to the US to find it out by
> myself.
>
> Further more, it is very difficult to have some contacts on the car
> maker side and though I past the last 2 weeks calling to European car
> makers, I only reached a couple of people that were able to slightly
> help me.
>



--
Posted via a free Usenet account from http://www.teranews.com

Earle Horton

A massive cross-posting to groups that are likely to be composed of drivers
of vehicles of various makes and models is likely to prove futile.

I have some really interesting copper-plated steel or iron hinges, that look
as if they might have been plated first, and then forged by hand. Doors in
an 1890s vintage Victorian house in Silverton, CO. It is amazing that a
blacksmith could do.

Saludos cordiales,
Schönen Gruß,
Saúde,

Earle

"Nouma" <emma.serres@gmail.com> wrote in message
news:1183576658.685297.56900@r34g2000hsd.googlegro ups.com...
> On Jul 4, 9:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > Comboverfish wrote:
> > > On Jul 4, 1:37 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > >> You were told on the first crosspost how to look them up yourself.
> >
> > > Oh, was "Do a "google" on "National Automotive Door, Hood, Trunk and
> > > Liftgate Hinge
> > > Museum and Archives"" a serious reply? Or did I miss the reply you
> > > are referring to?
> >
> > > I really don't know and am being serious here.
> >
> > > Toyota MDT in MO
> >
> > Sure sounded legit to me....
> >
> > Also sounds like some kid wanting his homework done for him....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> > (More Off Road album links at bottom of the view page)
>
>
> The "kid" has already been calling all major actors of the hinge
> industry and been able to map about 90% of the technologies used in
> the European Market.
>
> Unfortunately, I cannot afford to go to the US to find it out by
> myself.
>
> Further more, it is very difficult to have some contacts on the car
> maker side and though I past the last 2 weeks calling to European car
> makers, I only reached a couple of people that were able to slightly
> help me.
>



--
Posted via a free Usenet account from http://www.teranews.com

Earle Horton

A massive cross-posting to groups that are likely to be composed of drivers
of vehicles of various makes and models is likely to prove futile.

I have some really interesting copper-plated steel or iron hinges, that look
as if they might have been plated first, and then forged by hand. Doors in
an 1890s vintage Victorian house in Silverton, CO. It is amazing that a
blacksmith could do.

Saludos cordiales,
Schönen Gruß,
Saúde,

Earle

"Nouma" <emma.serres@gmail.com> wrote in message
news:1183576658.685297.56900@r34g2000hsd.googlegro ups.com...
> On Jul 4, 9:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > Comboverfish wrote:
> > > On Jul 4, 1:37 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > >> You were told on the first crosspost how to look them up yourself.
> >
> > > Oh, was "Do a "google" on "National Automotive Door, Hood, Trunk and
> > > Liftgate Hinge
> > > Museum and Archives"" a serious reply? Or did I miss the reply you
> > > are referring to?
> >
> > > I really don't know and am being serious here.
> >
> > > Toyota MDT in MO
> >
> > Sure sounded legit to me....
> >
> > Also sounds like some kid wanting his homework done for him....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> > (More Off Road album links at bottom of the view page)
>
>
> The "kid" has already been calling all major actors of the hinge
> industry and been able to map about 90% of the technologies used in
> the European Market.
>
> Unfortunately, I cannot afford to go to the US to find it out by
> myself.
>
> Further more, it is very difficult to have some contacts on the car
> maker side and though I past the last 2 weeks calling to European car
> makers, I only reached a couple of people that were able to slightly
> help me.
>



--
Posted via a free Usenet account from http://www.teranews.com

Earle Horton

A massive cross-posting to groups that are likely to be composed of drivers
of vehicles of various makes and models is likely to prove futile.

I have some really interesting copper-plated steel or iron hinges, that look
as if they might have been plated first, and then forged by hand. Doors in
an 1890s vintage Victorian house in Silverton, CO. It is amazing that a
blacksmith could do.

Saludos cordiales,
Schönen Gruß,
Saúde,

Earle

"Nouma" <emma.serres@gmail.com> wrote in message
news:1183576658.685297.56900@r34g2000hsd.googlegro ups.com...
> On Jul 4, 9:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > Comboverfish wrote:
> > > On Jul 4, 1:37 pm, Mike Romain <roma...@sympatico.ca> wrote:
> > >> You were told on the first crosspost how to look them up yourself.
> >
> > > Oh, was "Do a "google" on "National Automotive Door, Hood, Trunk and
> > > Liftgate Hinge
> > > Museum and Archives"" a serious reply? Or did I miss the reply you
> > > are referring to?
> >
> > > I really don't know and am being serious here.
> >
> > > Toyota MDT in MO
> >
> > Sure sounded legit to me....
> >
> > Also sounds like some kid wanting his homework done for him....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> > Canadian Off Road Trips Photos: Non members can still view!
> > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> > (More Off Road album links at bottom of the view page)
>
>
> The "kid" has already been calling all major actors of the hinge
> industry and been able to map about 90% of the technologies used in
> the European Market.
>
> Unfortunately, I cannot afford to go to the US to find it out by
> myself.
>
> Further more, it is very difficult to have some contacts on the car
> maker side and though I past the last 2 weeks calling to European car
> makers, I only reached a couple of people that were able to slightly
> help me.
>



--
Posted via a free Usenet account from http://www.teranews.com

Mike Romain

Nouma wrote:
> On Jul 4, 9:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Comboverfish wrote:
>>> On Jul 4, 1:37 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> You were told on the first crosspost how to look them up yourself.
>>> Oh, was "Do a "google" on "National Automotive Door, Hood, Trunk and
>>> Liftgate Hinge
>>> Museum and Archives"" a serious reply? Or did I miss the reply you
>>> are referring to?
>>> I really don't know and am being serious here.
>>> Toyota MDT in MO
>> Sure sounded legit to me....
>>
>> Also sounds like some kid wanting his homework done for him....
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
> The "kid" has already been calling all major actors of the hinge
> industry and been able to map about 90% of the technologies used in
> the European Market.
>
> Unfortunately, I cannot afford to go to the US to find it out by
> myself.
>
> Further more, it is very difficult to have some contacts on the car
> maker side and though I past the last 2 weeks calling to European car
> makers, I only reached a couple of people that were able to slightly
> help me.
>

Fair enough.

You should check out the 4x4 shops as they make aftermarket hinges for
Jeep restoration or just looks. Same for custom car shops for American
car restorations.

Mike

Mike Romain

Nouma wrote:
> On Jul 4, 9:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Comboverfish wrote:
>>> On Jul 4, 1:37 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> You were told on the first crosspost how to look them up yourself.
>>> Oh, was "Do a "google" on "National Automotive Door, Hood, Trunk and
>>> Liftgate Hinge
>>> Museum and Archives"" a serious reply? Or did I miss the reply you
>>> are referring to?
>>> I really don't know and am being serious here.
>>> Toyota MDT in MO
>> Sure sounded legit to me....
>>
>> Also sounds like some kid wanting his homework done for him....
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
> The "kid" has already been calling all major actors of the hinge
> industry and been able to map about 90% of the technologies used in
> the European Market.
>
> Unfortunately, I cannot afford to go to the US to find it out by
> myself.
>
> Further more, it is very difficult to have some contacts on the car
> maker side and though I past the last 2 weeks calling to European car
> makers, I only reached a couple of people that were able to slightly
> help me.
>

Fair enough.

You should check out the 4x4 shops as they make aftermarket hinges for
Jeep restoration or just looks. Same for custom car shops for American
car restorations.

Mike

Mike Romain

Nouma wrote:
> On Jul 4, 9:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Comboverfish wrote:
>>> On Jul 4, 1:37 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> You were told on the first crosspost how to look them up yourself.
>>> Oh, was "Do a "google" on "National Automotive Door, Hood, Trunk and
>>> Liftgate Hinge
>>> Museum and Archives"" a serious reply? Or did I miss the reply you
>>> are referring to?
>>> I really don't know and am being serious here.
>>> Toyota MDT in MO
>> Sure sounded legit to me....
>>
>> Also sounds like some kid wanting his homework done for him....
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
> The "kid" has already been calling all major actors of the hinge
> industry and been able to map about 90% of the technologies used in
> the European Market.
>
> Unfortunately, I cannot afford to go to the US to find it out by
> myself.
>
> Further more, it is very difficult to have some contacts on the car
> maker side and though I past the last 2 weeks calling to European car
> makers, I only reached a couple of people that were able to slightly
> help me.
>

Fair enough.

You should check out the 4x4 shops as they make aftermarket hinges for
Jeep restoration or just looks. Same for custom car shops for American
car restorations.

Mike

Mike Romain

Nouma wrote:
> On Jul 4, 9:10 pm, Mike Romain <roma...@sympatico.ca> wrote:
>> Comboverfish wrote:
>>> On Jul 4, 1:37 pm, Mike Romain <roma...@sympatico.ca> wrote:
>>>> You were told on the first crosspost how to look them up yourself.
>>> Oh, was "Do a "google" on "National Automotive Door, Hood, Trunk and
>>> Liftgate Hinge
>>> Museum and Archives"" a serious reply? Or did I miss the reply you
>>> are referring to?
>>> I really don't know and am being serious here.
>>> Toyota MDT in MO
>> Sure sounded legit to me....
>>
>> Also sounds like some kid wanting his homework done for him....
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
> The "kid" has already been calling all major actors of the hinge
> industry and been able to map about 90% of the technologies used in
> the European Market.
>
> Unfortunately, I cannot afford to go to the US to find it out by
> myself.
>
> Further more, it is very difficult to have some contacts on the car
> maker side and though I past the last 2 weeks calling to European car
> makers, I only reached a couple of people that were able to slightly
> help me.
>

Fair enough.

You should check out the 4x4 shops as they make aftermarket hinges for
Jeep restoration or just looks. Same for custom car shops for American
car restorations.

Mike

Steve Austin

Nouma wrote:
> Hi,
>
> I'm doing a research on car hinges and I'm trying to find some
> contacts in the automotive industry that could give me some
> informations on those components and about the manufacturing process
> that is used to produce the hinges.
>
> If any body had some contacts to share, please let me know.
>
> Or if you have some information to share directly, that would also be
> great!
>


Most hinge parts are made with progressive stamping dies. The round
parts (pins and rivets) are likely made with cnc screw machines or cam
operated screw machines. The assembly of the parts can range from very
high tech to very low tech. Low tech assembly in China or Mexico is
probably the trend.