Reputable source for rebuild kit
11-18-2006, 10:52 PM
#11
Guest
Posts: n/a
Re: Reputable source for rebuild kit
A good source is Hesco.
The best book is the factory service manual.
> Would like any recommendations regarding sources for master kits, 258
> tribal knowledge / tips&tricks and recommendations on books regarding
> rebuild of this motor.
>
11-18-2006, 10:52 PM
#12
Guest
Posts: n/a
Re: Reputable source for rebuild kit
A good source is Hesco.
The best book is the factory service manual.
> Would like any recommendations regarding sources for master kits, 258
> tribal knowledge / tips&tricks and recommendations on books regarding
> rebuild of this motor.
>
11-18-2006, 10:52 PM
#13
Guest
Posts: n/a
Re: Reputable source for rebuild kit
A good source is Hesco.
The best book is the factory service manual.
> Would like any recommendations regarding sources for master kits, 258
> tribal knowledge / tips&tricks and recommendations on books regarding
> rebuild of this motor.
>
11-18-2006, 10:54 PM
#14
Guest
Posts: n/a
Re: Reputable source for rebuild kit
With Advance Adapters you may bolt a Real Chevy in it:
http://www.advanceadapters.com/catalog/003.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Lou wrote:
>
> Hello,
>
> My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
> 1973 miles from Philly to Denver and have been tinkering, upgrading and
> learning since then.
>
> We have just picked up used 258 block, complete from flywheel to water
> pump for 50$ and want to use it to do a complete rebuild.
>
> Would like any recommendations regarding sources for master kits, 258
> tribal knowledge / tips&tricks and recommendations on books regarding
> rebuild of this motor.
>
> We had toyed with the idea of putting a 318 I have into the CJ but my
> boy wants to keep the original L6 but upgrade to a Howell system.
>
> Thanks in advance for sharing your experience,
>
> Lou
http://www.advanceadapters.com/catalog/003.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Lou wrote:
>
> Hello,
>
> My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
> 1973 miles from Philly to Denver and have been tinkering, upgrading and
> learning since then.
>
> We have just picked up used 258 block, complete from flywheel to water
> pump for 50$ and want to use it to do a complete rebuild.
>
> Would like any recommendations regarding sources for master kits, 258
> tribal knowledge / tips&tricks and recommendations on books regarding
> rebuild of this motor.
>
> We had toyed with the idea of putting a 318 I have into the CJ but my
> boy wants to keep the original L6 but upgrade to a Howell system.
>
> Thanks in advance for sharing your experience,
>
> Lou
11-18-2006, 10:54 PM
#15
Guest
Posts: n/a
Re: Reputable source for rebuild kit
With Advance Adapters you may bolt a Real Chevy in it:
http://www.advanceadapters.com/catalog/003.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Lou wrote:
>
> Hello,
>
> My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
> 1973 miles from Philly to Denver and have been tinkering, upgrading and
> learning since then.
>
> We have just picked up used 258 block, complete from flywheel to water
> pump for 50$ and want to use it to do a complete rebuild.
>
> Would like any recommendations regarding sources for master kits, 258
> tribal knowledge / tips&tricks and recommendations on books regarding
> rebuild of this motor.
>
> We had toyed with the idea of putting a 318 I have into the CJ but my
> boy wants to keep the original L6 but upgrade to a Howell system.
>
> Thanks in advance for sharing your experience,
>
> Lou
http://www.advanceadapters.com/catalog/003.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Lou wrote:
>
> Hello,
>
> My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
> 1973 miles from Philly to Denver and have been tinkering, upgrading and
> learning since then.
>
> We have just picked up used 258 block, complete from flywheel to water
> pump for 50$ and want to use it to do a complete rebuild.
>
> Would like any recommendations regarding sources for master kits, 258
> tribal knowledge / tips&tricks and recommendations on books regarding
> rebuild of this motor.
>
> We had toyed with the idea of putting a 318 I have into the CJ but my
> boy wants to keep the original L6 but upgrade to a Howell system.
>
> Thanks in advance for sharing your experience,
>
> Lou
11-18-2006, 10:54 PM
#16
Guest
Posts: n/a
Re: Reputable source for rebuild kit
With Advance Adapters you may bolt a Real Chevy in it:
http://www.advanceadapters.com/catalog/003.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Lou wrote:
>
> Hello,
>
> My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
> 1973 miles from Philly to Denver and have been tinkering, upgrading and
> learning since then.
>
> We have just picked up used 258 block, complete from flywheel to water
> pump for 50$ and want to use it to do a complete rebuild.
>
> Would like any recommendations regarding sources for master kits, 258
> tribal knowledge / tips&tricks and recommendations on books regarding
> rebuild of this motor.
>
> We had toyed with the idea of putting a 318 I have into the CJ but my
> boy wants to keep the original L6 but upgrade to a Howell system.
>
> Thanks in advance for sharing your experience,
>
> Lou
http://www.advanceadapters.com/catalog/003.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Lou wrote:
>
> Hello,
>
> My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
> 1973 miles from Philly to Denver and have been tinkering, upgrading and
> learning since then.
>
> We have just picked up used 258 block, complete from flywheel to water
> pump for 50$ and want to use it to do a complete rebuild.
>
> Would like any recommendations regarding sources for master kits, 258
> tribal knowledge / tips&tricks and recommendations on books regarding
> rebuild of this motor.
>
> We had toyed with the idea of putting a 318 I have into the CJ but my
> boy wants to keep the original L6 but upgrade to a Howell system.
>
> Thanks in advance for sharing your experience,
>
> Lou
11-19-2006, 06:38 PM
#17
Guest
Posts: n/a
Re: Reputable source for rebuild kit
Real Jeeps don't have Chevy's in them <G>
Jeff DeWitt
L.W.(Bill) ------ III wrote:
> With Advance Adapters you may bolt a Real Chevy in it:
> http://www.advanceadapters.com/catalog/003.html
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Lou wrote:
>
>>Hello,
>>
>>My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
>>1973 miles from Philly to Denver and have been tinkering, upgrading and
>>learning since then.
>>
>>We have just picked up used 258 block, complete from flywheel to water
>>pump for 50$ and want to use it to do a complete rebuild.
>>
>>Would like any recommendations regarding sources for master kits, 258
>>tribal knowledge / tips&tricks and recommendations on books regarding
>>rebuild of this motor.
>>
>>We had toyed with the idea of putting a 318 I have into the CJ but my
>>boy wants to keep the original L6 but upgrade to a Howell system.
>>
>>Thanks in advance for sharing your experience,
>>
>>Lou
Jeff DeWitt
L.W.(Bill) ------ III wrote:
> With Advance Adapters you may bolt a Real Chevy in it:
> http://www.advanceadapters.com/catalog/003.html
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Lou wrote:
>
>>Hello,
>>
>>My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
>>1973 miles from Philly to Denver and have been tinkering, upgrading and
>>learning since then.
>>
>>We have just picked up used 258 block, complete from flywheel to water
>>pump for 50$ and want to use it to do a complete rebuild.
>>
>>Would like any recommendations regarding sources for master kits, 258
>>tribal knowledge / tips&tricks and recommendations on books regarding
>>rebuild of this motor.
>>
>>We had toyed with the idea of putting a 318 I have into the CJ but my
>>boy wants to keep the original L6 but upgrade to a Howell system.
>>
>>Thanks in advance for sharing your experience,
>>
>>Lou
11-19-2006, 06:38 PM
#18
Guest
Posts: n/a
Re: Reputable source for rebuild kit
Real Jeeps don't have Chevy's in them <G>
Jeff DeWitt
L.W.(Bill) ------ III wrote:
> With Advance Adapters you may bolt a Real Chevy in it:
> http://www.advanceadapters.com/catalog/003.html
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Lou wrote:
>
>>Hello,
>>
>>My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
>>1973 miles from Philly to Denver and have been tinkering, upgrading and
>>learning since then.
>>
>>We have just picked up used 258 block, complete from flywheel to water
>>pump for 50$ and want to use it to do a complete rebuild.
>>
>>Would like any recommendations regarding sources for master kits, 258
>>tribal knowledge / tips&tricks and recommendations on books regarding
>>rebuild of this motor.
>>
>>We had toyed with the idea of putting a 318 I have into the CJ but my
>>boy wants to keep the original L6 but upgrade to a Howell system.
>>
>>Thanks in advance for sharing your experience,
>>
>>Lou
Jeff DeWitt
L.W.(Bill) ------ III wrote:
> With Advance Adapters you may bolt a Real Chevy in it:
> http://www.advanceadapters.com/catalog/003.html
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Lou wrote:
>
>>Hello,
>>
>>My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
>>1973 miles from Philly to Denver and have been tinkering, upgrading and
>>learning since then.
>>
>>We have just picked up used 258 block, complete from flywheel to water
>>pump for 50$ and want to use it to do a complete rebuild.
>>
>>Would like any recommendations regarding sources for master kits, 258
>>tribal knowledge / tips&tricks and recommendations on books regarding
>>rebuild of this motor.
>>
>>We had toyed with the idea of putting a 318 I have into the CJ but my
>>boy wants to keep the original L6 but upgrade to a Howell system.
>>
>>Thanks in advance for sharing your experience,
>>
>>Lou
11-19-2006, 06:38 PM
#19
Guest
Posts: n/a
Re: Reputable source for rebuild kit
Real Jeeps don't have Chevy's in them <G>
Jeff DeWitt
L.W.(Bill) ------ III wrote:
> With Advance Adapters you may bolt a Real Chevy in it:
> http://www.advanceadapters.com/catalog/003.html
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Lou wrote:
>
>>Hello,
>>
>>My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
>>1973 miles from Philly to Denver and have been tinkering, upgrading and
>>learning since then.
>>
>>We have just picked up used 258 block, complete from flywheel to water
>>pump for 50$ and want to use it to do a complete rebuild.
>>
>>Would like any recommendations regarding sources for master kits, 258
>>tribal knowledge / tips&tricks and recommendations on books regarding
>>rebuild of this motor.
>>
>>We had toyed with the idea of putting a 318 I have into the CJ but my
>>boy wants to keep the original L6 but upgrade to a Howell system.
>>
>>Thanks in advance for sharing your experience,
>>
>>Lou
Jeff DeWitt
L.W.(Bill) ------ III wrote:
> With Advance Adapters you may bolt a Real Chevy in it:
> http://www.advanceadapters.com/catalog/003.html
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Lou wrote:
>
>>Hello,
>>
>>My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
>>1973 miles from Philly to Denver and have been tinkering, upgrading and
>>learning since then.
>>
>>We have just picked up used 258 block, complete from flywheel to water
>>pump for 50$ and want to use it to do a complete rebuild.
>>
>>Would like any recommendations regarding sources for master kits, 258
>>tribal knowledge / tips&tricks and recommendations on books regarding
>>rebuild of this motor.
>>
>>We had toyed with the idea of putting a 318 I have into the CJ but my
>>boy wants to keep the original L6 but upgrade to a Howell system.
>>
>>Thanks in advance for sharing your experience,
>>
>>Lou
11-19-2006, 07:17 PM
#20
Guest
Posts: n/a
Re: Reputable source for rebuild kit
They have Buick in them.
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:lW58h.29781$nG1.10136@tornado.southeast.rr.co m...
> Real Jeeps don't have Chevy's in them <G>
>
> Jeff DeWitt
>
> L.W.(Bill) ------ III wrote:
>> With Advance Adapters you may bolt a Real Chevy in it:
>> http://www.advanceadapters.com/catalog/003.html God Bless America, Bill
>> O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Lou wrote:
>>
>>>Hello,
>>>
>>>My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
>>>1973 miles from Philly to Denver and have been tinkering, upgrading and
>>>learning since then.
>>>
>>>We have just picked up used 258 block, complete from flywheel to water
>>>pump for 50$ and want to use it to do a complete rebuild.
>>>
>>>Would like any recommendations regarding sources for master kits, 258
>>>tribal knowledge / tips&tricks and recommendations on books regarding
>>>rebuild of this motor.
>>>
>>>We had toyed with the idea of putting a 318 I have into the CJ but my
>>>boy wants to keep the original L6 but upgrade to a Howell system.
>>>
>>>Thanks in advance for sharing your experience,
>>>
>>>Lou
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:lW58h.29781$nG1.10136@tornado.southeast.rr.co m...
> Real Jeeps don't have Chevy's in them <G>
>
> Jeff DeWitt
>
> L.W.(Bill) ------ III wrote:
>> With Advance Adapters you may bolt a Real Chevy in it:
>> http://www.advanceadapters.com/catalog/003.html God Bless America, Bill
>> O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Lou wrote:
>>
>>>Hello,
>>>
>>>My son & I are new to Jeepin'. We picked up an 85 CJ7 in May, drove it
>>>1973 miles from Philly to Denver and have been tinkering, upgrading and
>>>learning since then.
>>>
>>>We have just picked up used 258 block, complete from flywheel to water
>>>pump for 50$ and want to use it to do a complete rebuild.
>>>
>>>Would like any recommendations regarding sources for master kits, 258
>>>tribal knowledge / tips&tricks and recommendations on books regarding
>>>rebuild of this motor.
>>>
>>>We had toyed with the idea of putting a 318 I have into the CJ but my
>>>boy wants to keep the original L6 but upgrade to a Howell system.
>>>
>>>Thanks in advance for sharing your experience,
>>>
>>>Lou
