Is replacing my hubs a direct swap-in?
10-19-2003, 05:45 PM
#1
Guest
Posts: n/a
Is replacing my hubs a direct swap-in?
I just bought a '76 CJ5 and here's a picture of my hubs:
http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
I'm wanting to get something like this:
http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
Is it as easy as ordering the hubs, then unbolting the 6 bolts that
hold the old ones I have now in place, and then bolting the new ones
in? If so, is there a better choice for replacement manual locking
hubs for my '76 CJ-5? I just want to be able to decouple the wheels
from the axles to reduce drivetrain wear when not using 4WD. Thank
you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
I'm wanting to get something like this:
http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
Is it as easy as ordering the hubs, then unbolting the 6 bolts that
hold the old ones I have now in place, and then bolting the new ones
in? If so, is there a better choice for replacement manual locking
hubs for my '76 CJ-5? I just want to be able to decouple the wheels
from the axles to reduce drivetrain wear when not using 4WD. Thank
you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-19-2003, 05:54 PM
#2
Guest
Posts: n/a
Re: Is replacing my hubs a direct swap-in?
I think that there is a snap ring inside the dust cap that you have to deal
with first, but yeah, changing the hubs is a pretty simple upgrade. Lots of
people like Warn hubs "just because."
Earle
"travis" <travist34removethis@hotmail.com> wrote in message
news:f716pvsojeeh6l6f2cuuoqsui00mra1q6r@4ax.com...
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
with first, but yeah, changing the hubs is a pretty simple upgrade. Lots of
people like Warn hubs "just because."
Earle
"travis" <travist34removethis@hotmail.com> wrote in message
news:f716pvsojeeh6l6f2cuuoqsui00mra1q6r@4ax.com...
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-19-2003, 05:54 PM
#3
Guest
Posts: n/a
Re: Is replacing my hubs a direct swap-in?
I think that there is a snap ring inside the dust cap that you have to deal
with first, but yeah, changing the hubs is a pretty simple upgrade. Lots of
people like Warn hubs "just because."
Earle
"travis" <travist34removethis@hotmail.com> wrote in message
news:f716pvsojeeh6l6f2cuuoqsui00mra1q6r@4ax.com...
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
with first, but yeah, changing the hubs is a pretty simple upgrade. Lots of
people like Warn hubs "just because."
Earle
"travis" <travist34removethis@hotmail.com> wrote in message
news:f716pvsojeeh6l6f2cuuoqsui00mra1q6r@4ax.com...
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-19-2003, 05:54 PM
#4
Guest
Posts: n/a
Re: Is replacing my hubs a direct swap-in?
I think that there is a snap ring inside the dust cap that you have to deal
with first, but yeah, changing the hubs is a pretty simple upgrade. Lots of
people like Warn hubs "just because."
Earle
"travis" <travist34removethis@hotmail.com> wrote in message
news:f716pvsojeeh6l6f2cuuoqsui00mra1q6r@4ax.com...
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
with first, but yeah, changing the hubs is a pretty simple upgrade. Lots of
people like Warn hubs "just because."
Earle
"travis" <travist34removethis@hotmail.com> wrote in message
news:f716pvsojeeh6l6f2cuuoqsui00mra1q6r@4ax.com...
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-19-2003, 05:55 PM
#5
Guest
Posts: n/a
Re: Is replacing my hubs a direct swap-in?
http://products.warn.com/warn.nsf/wa...ucts.Main.html
As easy as changing a wheel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
As easy as changing a wheel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-19-2003, 05:55 PM
#6
Guest
Posts: n/a
Re: Is replacing my hubs a direct swap-in?
http://products.warn.com/warn.nsf/wa...ucts.Main.html
As easy as changing a wheel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
As easy as changing a wheel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-19-2003, 05:55 PM
#7
Guest
Posts: n/a
Re: Is replacing my hubs a direct swap-in?
http://products.warn.com/warn.nsf/wa...ucts.Main.html
As easy as changing a wheel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
As easy as changing a wheel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> I just bought a '76 CJ5 and here's a picture of my hubs:
> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
> I'm wanting to get something like this:
> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
> hold the old ones I have now in place, and then bolting the new ones
> in? If so, is there a better choice for replacement manual locking
> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
> from the axles to reduce drivetrain wear when not using 4WD. Thank
> you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-20-2003, 08:34 AM
#8
Guest
Posts: n/a
Re: Is replacing my hubs a direct swap-in?
On Sun, 19 Oct 2003 14:55:24 -0700, L.W.(ßill) ------ III
<----------@***.net> shared the following:
>http://products.warn.com/warn.nsf/wa...ucts.Main.html
>As easy as changing a wheel.
OK, it looks to me like Warn part number 9062 is what I'd need for a
'76 CJ5. I just called Advance Auto Parts locally and gave them
Warn's part number. They said $139.99 which I guess isn't too bad...
I'd assume that part # 9062 would be for a PAIR of the hubs and not
just one. I asked the guy at Advance Auto and he said he thinks it's
just for one. Does that sound right to y'all? Thanks.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>travis wrote:
>>
>> I just bought a '76 CJ5 and here's a picture of my hubs:
>> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
>> I'm wanting to get something like this:
>> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
>> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
>> hold the old ones I have now in place, and then bolting the new ones
>> in? If so, is there a better choice for replacement manual locking
>> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
>> from the axles to reduce drivetrain wear when not using 4WD. Thank
>> you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<----------@***.net> shared the following:
>http://products.warn.com/warn.nsf/wa...ucts.Main.html
>As easy as changing a wheel.
OK, it looks to me like Warn part number 9062 is what I'd need for a
'76 CJ5. I just called Advance Auto Parts locally and gave them
Warn's part number. They said $139.99 which I guess isn't too bad...
I'd assume that part # 9062 would be for a PAIR of the hubs and not
just one. I asked the guy at Advance Auto and he said he thinks it's
just for one. Does that sound right to y'all? Thanks.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>travis wrote:
>>
>> I just bought a '76 CJ5 and here's a picture of my hubs:
>> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
>> I'm wanting to get something like this:
>> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
>> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
>> hold the old ones I have now in place, and then bolting the new ones
>> in? If so, is there a better choice for replacement manual locking
>> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
>> from the axles to reduce drivetrain wear when not using 4WD. Thank
>> you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-20-2003, 08:34 AM
#9
Guest
Posts: n/a
Re: Is replacing my hubs a direct swap-in?
On Sun, 19 Oct 2003 14:55:24 -0700, L.W.(ßill) ------ III
<----------@***.net> shared the following:
>http://products.warn.com/warn.nsf/wa...ucts.Main.html
>As easy as changing a wheel.
OK, it looks to me like Warn part number 9062 is what I'd need for a
'76 CJ5. I just called Advance Auto Parts locally and gave them
Warn's part number. They said $139.99 which I guess isn't too bad...
I'd assume that part # 9062 would be for a PAIR of the hubs and not
just one. I asked the guy at Advance Auto and he said he thinks it's
just for one. Does that sound right to y'all? Thanks.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>travis wrote:
>>
>> I just bought a '76 CJ5 and here's a picture of my hubs:
>> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
>> I'm wanting to get something like this:
>> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
>> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
>> hold the old ones I have now in place, and then bolting the new ones
>> in? If so, is there a better choice for replacement manual locking
>> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
>> from the axles to reduce drivetrain wear when not using 4WD. Thank
>> you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<----------@***.net> shared the following:
>http://products.warn.com/warn.nsf/wa...ucts.Main.html
>As easy as changing a wheel.
OK, it looks to me like Warn part number 9062 is what I'd need for a
'76 CJ5. I just called Advance Auto Parts locally and gave them
Warn's part number. They said $139.99 which I guess isn't too bad...
I'd assume that part # 9062 would be for a PAIR of the hubs and not
just one. I asked the guy at Advance Auto and he said he thinks it's
just for one. Does that sound right to y'all? Thanks.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>travis wrote:
>>
>> I just bought a '76 CJ5 and here's a picture of my hubs:
>> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
>> I'm wanting to get something like this:
>> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
>> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
>> hold the old ones I have now in place, and then bolting the new ones
>> in? If so, is there a better choice for replacement manual locking
>> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
>> from the axles to reduce drivetrain wear when not using 4WD. Thank
>> you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-20-2003, 08:34 AM
#10
Guest
Posts: n/a
Re: Is replacing my hubs a direct swap-in?
On Sun, 19 Oct 2003 14:55:24 -0700, L.W.(ßill) ------ III
<----------@***.net> shared the following:
>http://products.warn.com/warn.nsf/wa...ucts.Main.html
>As easy as changing a wheel.
OK, it looks to me like Warn part number 9062 is what I'd need for a
'76 CJ5. I just called Advance Auto Parts locally and gave them
Warn's part number. They said $139.99 which I guess isn't too bad...
I'd assume that part # 9062 would be for a PAIR of the hubs and not
just one. I asked the guy at Advance Auto and he said he thinks it's
just for one. Does that sound right to y'all? Thanks.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>travis wrote:
>>
>> I just bought a '76 CJ5 and here's a picture of my hubs:
>> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
>> I'm wanting to get something like this:
>> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
>> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
>> hold the old ones I have now in place, and then bolting the new ones
>> in? If so, is there a better choice for replacement manual locking
>> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
>> from the axles to reduce drivetrain wear when not using 4WD. Thank
>> you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<----------@***.net> shared the following:
>http://products.warn.com/warn.nsf/wa...ucts.Main.html
>As easy as changing a wheel.
OK, it looks to me like Warn part number 9062 is what I'd need for a
'76 CJ5. I just called Advance Auto Parts locally and gave them
Warn's part number. They said $139.99 which I guess isn't too bad...
I'd assume that part # 9062 would be for a PAIR of the hubs and not
just one. I asked the guy at Advance Auto and he said he thinks it's
just for one. Does that sound right to y'all? Thanks.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>travis wrote:
>>
>> I just bought a '76 CJ5 and here's a picture of my hubs:
>> http://jeepadventures.dyndns.org/jeep/dayone/14.jpg
>> I'm wanting to get something like this:
>> http://www.4wd.com/shopwrangler/Disp...ductSKU=400502
>> Is it as easy as ordering the hubs, then unbolting the 6 bolts that
>> hold the old ones I have now in place, and then bolting the new ones
>> in? If so, is there a better choice for replacement manual locking
>> hubs for my '76 CJ-5? I just want to be able to decouple the wheels
>> from the axles to reduce drivetrain wear when not using 4WD. Thank
>> you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
