Replacing horn
#1
Guest
Posts: n/a
Replacing horn
I tried to replace my horn(speakers)? and It is a pain in the *** to put
them back one getting them off proved to be a difficult, any idea on how to
ease the reinstallment, both horns are shot. I removed the bezel and the
turn signal lamp but sticking my hand in that little hole is very
unconfortable, and thus far making it impossible, any ideas on how to ease
the reinstalliation?
Any help is greatly appreciated.
Adonis
them back one getting them off proved to be a difficult, any idea on how to
ease the reinstallment, both horns are shot. I removed the bezel and the
turn signal lamp but sticking my hand in that little hole is very
unconfortable, and thus far making it impossible, any ideas on how to ease
the reinstalliation?
Any help is greatly appreciated.
Adonis
#2
Guest
Posts: n/a
Re: Replacing horn
Adonis did pass the time by typing:
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
Make and model of Jeep?
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
Make and model of Jeep?
#3
Guest
Posts: n/a
Re: Replacing horn
Adonis did pass the time by typing:
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
Make and model of Jeep?
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
Make and model of Jeep?
#4
Guest
Posts: n/a
Re: Replacing horn
Adonis did pass the time by typing:
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
Make and model of Jeep?
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
Make and model of Jeep?
#5
Guest
Posts: n/a
Re: Replacing horn
Adonis did pass the time by typing:
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
Make and model of Jeep?
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
Make and model of Jeep?
#6
Guest
Posts: n/a
Re: Replacing horn
"DougW" <post.replies@invalid.address> wrote in message
news:ezSUc.51370$wo.4598@okepread06...
> Adonis did pass the time by typing:
> > I tried to replace my horn(speakers)? and It is a pain in the *** to put
> > them back one getting them off proved to be a difficult, any idea on how
to
> > ease the reinstallment, both horns are shot. I removed the bezel and the
> > turn signal lamp but sticking my hand in that little hole is very
> > unconfortable, and thus far making it impossible, any ideas on how to
ease
> > the reinstalliation?
> >
> > Any help is greatly appreciated.
>
> Make and model of Jeep?
>
>
woops forgot 94XJ
news:ezSUc.51370$wo.4598@okepread06...
> Adonis did pass the time by typing:
> > I tried to replace my horn(speakers)? and It is a pain in the *** to put
> > them back one getting them off proved to be a difficult, any idea on how
to
> > ease the reinstallment, both horns are shot. I removed the bezel and the
> > turn signal lamp but sticking my hand in that little hole is very
> > unconfortable, and thus far making it impossible, any ideas on how to
ease
> > the reinstalliation?
> >
> > Any help is greatly appreciated.
>
> Make and model of Jeep?
>
>
woops forgot 94XJ
#7
Guest
Posts: n/a
Re: Replacing horn
"DougW" <post.replies@invalid.address> wrote in message
news:ezSUc.51370$wo.4598@okepread06...
> Adonis did pass the time by typing:
> > I tried to replace my horn(speakers)? and It is a pain in the *** to put
> > them back one getting them off proved to be a difficult, any idea on how
to
> > ease the reinstallment, both horns are shot. I removed the bezel and the
> > turn signal lamp but sticking my hand in that little hole is very
> > unconfortable, and thus far making it impossible, any ideas on how to
ease
> > the reinstalliation?
> >
> > Any help is greatly appreciated.
>
> Make and model of Jeep?
>
>
woops forgot 94XJ
news:ezSUc.51370$wo.4598@okepread06...
> Adonis did pass the time by typing:
> > I tried to replace my horn(speakers)? and It is a pain in the *** to put
> > them back one getting them off proved to be a difficult, any idea on how
to
> > ease the reinstallment, both horns are shot. I removed the bezel and the
> > turn signal lamp but sticking my hand in that little hole is very
> > unconfortable, and thus far making it impossible, any ideas on how to
ease
> > the reinstalliation?
> >
> > Any help is greatly appreciated.
>
> Make and model of Jeep?
>
>
woops forgot 94XJ
#8
Guest
Posts: n/a
Re: Replacing horn
"DougW" <post.replies@invalid.address> wrote in message
news:ezSUc.51370$wo.4598@okepread06...
> Adonis did pass the time by typing:
> > I tried to replace my horn(speakers)? and It is a pain in the *** to put
> > them back one getting them off proved to be a difficult, any idea on how
to
> > ease the reinstallment, both horns are shot. I removed the bezel and the
> > turn signal lamp but sticking my hand in that little hole is very
> > unconfortable, and thus far making it impossible, any ideas on how to
ease
> > the reinstalliation?
> >
> > Any help is greatly appreciated.
>
> Make and model of Jeep?
>
>
woops forgot 94XJ
news:ezSUc.51370$wo.4598@okepread06...
> Adonis did pass the time by typing:
> > I tried to replace my horn(speakers)? and It is a pain in the *** to put
> > them back one getting them off proved to be a difficult, any idea on how
to
> > ease the reinstallment, both horns are shot. I removed the bezel and the
> > turn signal lamp but sticking my hand in that little hole is very
> > unconfortable, and thus far making it impossible, any ideas on how to
ease
> > the reinstalliation?
> >
> > Any help is greatly appreciated.
>
> Make and model of Jeep?
>
>
woops forgot 94XJ
#9
Guest
Posts: n/a
Re: Replacing horn
"DougW" <post.replies@invalid.address> wrote in message
news:ezSUc.51370$wo.4598@okepread06...
> Adonis did pass the time by typing:
> > I tried to replace my horn(speakers)? and It is a pain in the *** to put
> > them back one getting them off proved to be a difficult, any idea on how
to
> > ease the reinstallment, both horns are shot. I removed the bezel and the
> > turn signal lamp but sticking my hand in that little hole is very
> > unconfortable, and thus far making it impossible, any ideas on how to
ease
> > the reinstalliation?
> >
> > Any help is greatly appreciated.
>
> Make and model of Jeep?
>
>
woops forgot 94XJ
news:ezSUc.51370$wo.4598@okepread06...
> Adonis did pass the time by typing:
> > I tried to replace my horn(speakers)? and It is a pain in the *** to put
> > them back one getting them off proved to be a difficult, any idea on how
to
> > ease the reinstallment, both horns are shot. I removed the bezel and the
> > turn signal lamp but sticking my hand in that little hole is very
> > unconfortable, and thus far making it impossible, any ideas on how to
ease
> > the reinstalliation?
> >
> > Any help is greatly appreciated.
>
> Make and model of Jeep?
>
>
woops forgot 94XJ
#10
Guest
Posts: n/a
Re: Replacing horn
It's easier if you remove the fender well splash panel:
http://www.----------.com/hornRemoval.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Adonis wrote:
>
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
>
> Adonis
http://www.----------.com/hornRemoval.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Adonis wrote:
>
> I tried to replace my horn(speakers)? and It is a pain in the *** to put
> them back one getting them off proved to be a difficult, any idea on how to
> ease the reinstallment, both horns are shot. I removed the bezel and the
> turn signal lamp but sticking my hand in that little hole is very
> unconfortable, and thus far making it impossible, any ideas on how to ease
> the reinstalliation?
>
> Any help is greatly appreciated.
>
> Adonis