Replacing Cat converter, muffler & tailpipe
09-20-2005, 05:43 PM
#41
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
http://froogle.google.com/froogle?q=...ff&oi=froogler
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> I neglected to ask about a new catalytic converter. To add a universal
> converter to the deal would probably be less than $100 additional
>
> --
> .
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> I neglected to ask about a new catalytic converter. To add a universal
> converter to the deal would probably be less than $100 additional
>
> --
> .
09-20-2005, 05:43 PM
#42
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
http://froogle.google.com/froogle?q=...ff&oi=froogler
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> I neglected to ask about a new catalytic converter. To add a universal
> converter to the deal would probably be less than $100 additional
>
> --
> .
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> I neglected to ask about a new catalytic converter. To add a universal
> converter to the deal would probably be less than $100 additional
>
> --
> .
09-20-2005, 05:43 PM
#43
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
http://froogle.google.com/froogle?q=...ff&oi=froogler
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> I neglected to ask about a new catalytic converter. To add a universal
> converter to the deal would probably be less than $100 additional
>
> --
> .
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> I neglected to ask about a new catalytic converter. To add a universal
> converter to the deal would probably be less than $100 additional
>
> --
> .
09-20-2005, 06:34 PM
#44
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
Catalytic converters for Jeeps
http://froogle.google.com/froogle?hl...Search+Froogle
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Sharing is why we are all here....... or should be.
..
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4330829E.E57E85D1@***.net...
> http://froogle.google.com/froogle?q=...ff&oi=froogler
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Billy Ray wrote:
>>
>> I neglected to ask about a new catalytic converter. To add a universal
>> converter to the deal would probably be less than $100 additional
>>
>> --
>> .
http://froogle.google.com/froogle?hl...Search+Froogle
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Sharing is why we are all here....... or should be.
..
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4330829E.E57E85D1@***.net...
> http://froogle.google.com/froogle?q=...ff&oi=froogler
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Billy Ray wrote:
>>
>> I neglected to ask about a new catalytic converter. To add a universal
>> converter to the deal would probably be less than $100 additional
>>
>> --
>> .
09-20-2005, 06:34 PM
#45
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
Catalytic converters for Jeeps
http://froogle.google.com/froogle?hl...Search+Froogle
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Sharing is why we are all here....... or should be.
..
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4330829E.E57E85D1@***.net...
> http://froogle.google.com/froogle?q=...ff&oi=froogler
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Billy Ray wrote:
>>
>> I neglected to ask about a new catalytic converter. To add a universal
>> converter to the deal would probably be less than $100 additional
>>
>> --
>> .
http://froogle.google.com/froogle?hl...Search+Froogle
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Sharing is why we are all here....... or should be.
..
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4330829E.E57E85D1@***.net...
> http://froogle.google.com/froogle?q=...ff&oi=froogler
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Billy Ray wrote:
>>
>> I neglected to ask about a new catalytic converter. To add a universal
>> converter to the deal would probably be less than $100 additional
>>
>> --
>> .
09-20-2005, 06:34 PM
#46
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
Catalytic converters for Jeeps
http://froogle.google.com/froogle?hl...Search+Froogle
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Sharing is why we are all here....... or should be.
..
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4330829E.E57E85D1@***.net...
> http://froogle.google.com/froogle?q=...ff&oi=froogler
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Billy Ray wrote:
>>
>> I neglected to ask about a new catalytic converter. To add a universal
>> converter to the deal would probably be less than $100 additional
>>
>> --
>> .
http://froogle.google.com/froogle?hl...Search+Froogle
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Sharing is why we are all here....... or should be.
..
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:4330829E.E57E85D1@***.net...
> http://froogle.google.com/froogle?q=...ff&oi=froogler
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Billy Ray wrote:
>>
>> I neglected to ask about a new catalytic converter. To add a universal
>> converter to the deal would probably be less than $100 additional
>>
>> --
>> .
09-20-2005, 09:26 PM
#47
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
Mike Romain did pass the time by typing:
> Have you ever done an exhaust system before?
>
> I gave up on doing them because they normally end up being 'WAY' more
> pain in the butt than they are worth.
>
> After 6 or 8 hours, or by the second day and with dead saw blades,
> ripped knuckles, stripped bolt/nut heads, cursing, jacking then cursing
> more when you figure no way that @#$%^ tailpipe is going over that axle
> without it being on a hoist, that $100.00 labor they wanted at the
> muffler shop is cheap!
I've got to agree with Mike. If you have the money, pay someone with
the lift and tools to do the job.
I did the system on my ZJ but would probably let someone else do it
next time. The cat-back and headers are easy (mostly easy). The
cat is a royal pain in the *** because it's usually welded/rusted
to the downpipe. Beat on the downpipe too much and you can crack
the header. It's easier to have someone zip it off with the gas
wrench. pffffffft! pfffffft! CLANG! seemple. :)
--
DougW
> Have you ever done an exhaust system before?
>
> I gave up on doing them because they normally end up being 'WAY' more
> pain in the butt than they are worth.
>
> After 6 or 8 hours, or by the second day and with dead saw blades,
> ripped knuckles, stripped bolt/nut heads, cursing, jacking then cursing
> more when you figure no way that @#$%^ tailpipe is going over that axle
> without it being on a hoist, that $100.00 labor they wanted at the
> muffler shop is cheap!
I've got to agree with Mike. If you have the money, pay someone with
the lift and tools to do the job.
I did the system on my ZJ but would probably let someone else do it
next time. The cat-back and headers are easy (mostly easy). The
cat is a royal pain in the *** because it's usually welded/rusted
to the downpipe. Beat on the downpipe too much and you can crack
the header. It's easier to have someone zip it off with the gas
wrench. pffffffft! pfffffft! CLANG! seemple. :)
--
DougW
09-20-2005, 09:26 PM
#48
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
Mike Romain did pass the time by typing:
> Have you ever done an exhaust system before?
>
> I gave up on doing them because they normally end up being 'WAY' more
> pain in the butt than they are worth.
>
> After 6 or 8 hours, or by the second day and with dead saw blades,
> ripped knuckles, stripped bolt/nut heads, cursing, jacking then cursing
> more when you figure no way that @#$%^ tailpipe is going over that axle
> without it being on a hoist, that $100.00 labor they wanted at the
> muffler shop is cheap!
I've got to agree with Mike. If you have the money, pay someone with
the lift and tools to do the job.
I did the system on my ZJ but would probably let someone else do it
next time. The cat-back and headers are easy (mostly easy). The
cat is a royal pain in the *** because it's usually welded/rusted
to the downpipe. Beat on the downpipe too much and you can crack
the header. It's easier to have someone zip it off with the gas
wrench. pffffffft! pfffffft! CLANG! seemple. :)
--
DougW
> Have you ever done an exhaust system before?
>
> I gave up on doing them because they normally end up being 'WAY' more
> pain in the butt than they are worth.
>
> After 6 or 8 hours, or by the second day and with dead saw blades,
> ripped knuckles, stripped bolt/nut heads, cursing, jacking then cursing
> more when you figure no way that @#$%^ tailpipe is going over that axle
> without it being on a hoist, that $100.00 labor they wanted at the
> muffler shop is cheap!
I've got to agree with Mike. If you have the money, pay someone with
the lift and tools to do the job.
I did the system on my ZJ but would probably let someone else do it
next time. The cat-back and headers are easy (mostly easy). The
cat is a royal pain in the *** because it's usually welded/rusted
to the downpipe. Beat on the downpipe too much and you can crack
the header. It's easier to have someone zip it off with the gas
wrench. pffffffft! pfffffft! CLANG! seemple. :)
--
DougW
09-20-2005, 09:26 PM
#49
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
Mike Romain did pass the time by typing:
> Have you ever done an exhaust system before?
>
> I gave up on doing them because they normally end up being 'WAY' more
> pain in the butt than they are worth.
>
> After 6 or 8 hours, or by the second day and with dead saw blades,
> ripped knuckles, stripped bolt/nut heads, cursing, jacking then cursing
> more when you figure no way that @#$%^ tailpipe is going over that axle
> without it being on a hoist, that $100.00 labor they wanted at the
> muffler shop is cheap!
I've got to agree with Mike. If you have the money, pay someone with
the lift and tools to do the job.
I did the system on my ZJ but would probably let someone else do it
next time. The cat-back and headers are easy (mostly easy). The
cat is a royal pain in the *** because it's usually welded/rusted
to the downpipe. Beat on the downpipe too much and you can crack
the header. It's easier to have someone zip it off with the gas
wrench. pffffffft! pfffffft! CLANG! seemple. :)
--
DougW
> Have you ever done an exhaust system before?
>
> I gave up on doing them because they normally end up being 'WAY' more
> pain in the butt than they are worth.
>
> After 6 or 8 hours, or by the second day and with dead saw blades,
> ripped knuckles, stripped bolt/nut heads, cursing, jacking then cursing
> more when you figure no way that @#$%^ tailpipe is going over that axle
> without it being on a hoist, that $100.00 labor they wanted at the
> muffler shop is cheap!
I've got to agree with Mike. If you have the money, pay someone with
the lift and tools to do the job.
I did the system on my ZJ but would probably let someone else do it
next time. The cat-back and headers are easy (mostly easy). The
cat is a royal pain in the *** because it's usually welded/rusted
to the downpipe. Beat on the downpipe too much and you can crack
the header. It's easier to have someone zip it off with the gas
wrench. pffffffft! pfffffft! CLANG! seemple. :)
--
DougW
09-20-2005, 10:15 PM
#50
Guest
Posts: n/a
Re: Replacing Cat converter, muffler & tailpipe
I was just going what you said "Cat-Back" which usually is larger
stainless steel pipe with mandrel bends.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> Catalytic converters for Jeeps
> http://froogle.google.com/froogle?hl...Search+Froogle
>
> --
> .
> Billy_Ray@SPAM.fuse.net (remove SPAM)
> 2002 Jeep WJ 4 Liter Automatic
> Sharing is why we are all here....... or should be.
stainless steel pipe with mandrel bends.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> Catalytic converters for Jeeps
> http://froogle.google.com/froogle?hl...Search+Froogle
>
> --
> .
> Billy_Ray@SPAM.fuse.net (remove SPAM)
> 2002 Jeep WJ 4 Liter Automatic
> Sharing is why we are all here....... or should be.
