Replacement key for 2001 Grand Cherokee
03-09-2006, 03:30 PM
#1
Guest
Posts: n/a
Replacement key for 2001 Grand Cherokee
I am down to 1 key for my GC and want to get a replacement. I have
found a source online for the blank key with the chip and it can
apparently be programmed without any equipment. Problem is you need
both original keys to do this. Do I have any other option short of
going to the dealer? What will it cost to get a replacement from the
dealer for the programmed key?
It seems ridiuculous that with 1 key and the VIN I can't get a key
somewhere short of the dealer.
found a source online for the blank key with the chip and it can
apparently be programmed without any equipment. Problem is you need
both original keys to do this. Do I have any other option short of
going to the dealer? What will it cost to get a replacement from the
dealer for the programmed key?
It seems ridiuculous that with 1 key and the VIN I can't get a key
somewhere short of the dealer.
03-09-2006, 03:55 PM
#2
Guest
Posts: n/a
Re: Replacement key for 2001 Grand Cherokee
Programming a key requires specialized electronic equipment to interface
with the Vehicle computer.
I also was in the same situation with only one key and I was able to get a
new key, that I provided, cut and programmed at a local 'professional'
locksmith for $24.95 I got Jeep branded transponder keys from a locksmith
in California for $11.99 each + shipping.
Not all locksmith's provide this service. You may need to call around to
find one with the proper equipment.
I would recommend that you get 2 keys..... Have the locksmith program one
and then you can reprogram the other. The procedure if you have 2 working
keys is quite simple and takes less than 30 seconds.
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
with the Vehicle computer.
I also was in the same situation with only one key and I was able to get a
new key, that I provided, cut and programmed at a local 'professional'
locksmith for $24.95 I got Jeep branded transponder keys from a locksmith
in California for $11.99 each + shipping.
Not all locksmith's provide this service. You may need to call around to
find one with the proper equipment.
I would recommend that you get 2 keys..... Have the locksmith program one
and then you can reprogram the other. The procedure if you have 2 working
keys is quite simple and takes less than 30 seconds.
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
03-09-2006, 03:55 PM
#3
Guest
Posts: n/a
Re: Replacement key for 2001 Grand Cherokee
Programming a key requires specialized electronic equipment to interface
with the Vehicle computer.
I also was in the same situation with only one key and I was able to get a
new key, that I provided, cut and programmed at a local 'professional'
locksmith for $24.95 I got Jeep branded transponder keys from a locksmith
in California for $11.99 each + shipping.
Not all locksmith's provide this service. You may need to call around to
find one with the proper equipment.
I would recommend that you get 2 keys..... Have the locksmith program one
and then you can reprogram the other. The procedure if you have 2 working
keys is quite simple and takes less than 30 seconds.
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
with the Vehicle computer.
I also was in the same situation with only one key and I was able to get a
new key, that I provided, cut and programmed at a local 'professional'
locksmith for $24.95 I got Jeep branded transponder keys from a locksmith
in California for $11.99 each + shipping.
Not all locksmith's provide this service. You may need to call around to
find one with the proper equipment.
I would recommend that you get 2 keys..... Have the locksmith program one
and then you can reprogram the other. The procedure if you have 2 working
keys is quite simple and takes less than 30 seconds.
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
03-09-2006, 03:55 PM
#4
Guest
Posts: n/a
Re: Replacement key for 2001 Grand Cherokee
Programming a key requires specialized electronic equipment to interface
with the Vehicle computer.
I also was in the same situation with only one key and I was able to get a
new key, that I provided, cut and programmed at a local 'professional'
locksmith for $24.95 I got Jeep branded transponder keys from a locksmith
in California for $11.99 each + shipping.
Not all locksmith's provide this service. You may need to call around to
find one with the proper equipment.
I would recommend that you get 2 keys..... Have the locksmith program one
and then you can reprogram the other. The procedure if you have 2 working
keys is quite simple and takes less than 30 seconds.
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
with the Vehicle computer.
I also was in the same situation with only one key and I was able to get a
new key, that I provided, cut and programmed at a local 'professional'
locksmith for $24.95 I got Jeep branded transponder keys from a locksmith
in California for $11.99 each + shipping.
Not all locksmith's provide this service. You may need to call around to
find one with the proper equipment.
I would recommend that you get 2 keys..... Have the locksmith program one
and then you can reprogram the other. The procedure if you have 2 working
keys is quite simple and takes less than 30 seconds.
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
03-09-2006, 03:55 PM
#5
Guest
Posts: n/a
Re: Replacement key for 2001 Grand Cherokee
Programming a key requires specialized electronic equipment to interface
with the Vehicle computer.
I also was in the same situation with only one key and I was able to get a
new key, that I provided, cut and programmed at a local 'professional'
locksmith for $24.95 I got Jeep branded transponder keys from a locksmith
in California for $11.99 each + shipping.
Not all locksmith's provide this service. You may need to call around to
find one with the proper equipment.
I would recommend that you get 2 keys..... Have the locksmith program one
and then you can reprogram the other. The procedure if you have 2 working
keys is quite simple and takes less than 30 seconds.
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
with the Vehicle computer.
I also was in the same situation with only one key and I was able to get a
new key, that I provided, cut and programmed at a local 'professional'
locksmith for $24.95 I got Jeep branded transponder keys from a locksmith
in California for $11.99 each + shipping.
Not all locksmith's provide this service. You may need to call around to
find one with the proper equipment.
I would recommend that you get 2 keys..... Have the locksmith program one
and then you can reprogram the other. The procedure if you have 2 working
keys is quite simple and takes less than 30 seconds.
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
03-09-2006, 04:03 PM
#6
Guest
Posts: n/a
Re: Replacement key for 2001 Grand Cherokee
I forgot to mention that you will need to get the "SKIM" code from the
dealership PARTS department. They will need your VIN to retrieve it and
they may require proof that it is your vehicle (title, registration, etc.)
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
dealership PARTS department. They will need your VIN to retrieve it and
they may require proof that it is your vehicle (title, registration, etc.)
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
03-09-2006, 04:03 PM
#7
Guest
Posts: n/a
Re: Replacement key for 2001 Grand Cherokee
I forgot to mention that you will need to get the "SKIM" code from the
dealership PARTS department. They will need your VIN to retrieve it and
they may require proof that it is your vehicle (title, registration, etc.)
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
dealership PARTS department. They will need your VIN to retrieve it and
they may require proof that it is your vehicle (title, registration, etc.)
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
03-09-2006, 04:03 PM
#8
Guest
Posts: n/a
Re: Replacement key for 2001 Grand Cherokee
I forgot to mention that you will need to get the "SKIM" code from the
dealership PARTS department. They will need your VIN to retrieve it and
they may require proof that it is your vehicle (title, registration, etc.)
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
dealership PARTS department. They will need your VIN to retrieve it and
they may require proof that it is your vehicle (title, registration, etc.)
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
03-09-2006, 04:03 PM
#9
Guest
Posts: n/a
Re: Replacement key for 2001 Grand Cherokee
I forgot to mention that you will need to get the "SKIM" code from the
dealership PARTS department. They will need your VIN to retrieve it and
they may require proof that it is your vehicle (title, registration, etc.)
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
dealership PARTS department. They will need your VIN to retrieve it and
they may require proof that it is your vehicle (title, registration, etc.)
<michaeljc70@hotmail.com> wrote in message
news:1141936242.733460.321840@i40g2000cwc.googlegr oups.com...
>I am down to 1 key for my GC and want to get a replacement. I have
> found a source online for the blank key with the chip and it can
> apparently be programmed without any equipment. Problem is you need
> both original keys to do this. Do I have any other option short of
> going to the dealer? What will it cost to get a replacement from the
> dealer for the programmed key?
>
> It seems ridiuculous that with 1 key and the VIN I can't get a key
> somewhere short of the dealer.
>
03-09-2006, 05:48 PM
#10
Guest
Posts: n/a
Re: Replacement key for 2001 Grand Cherokee
See http://www.wjjeeps.com/sentry.htm for instructions.
You will need two original keys to do it yourself. Dealer can do it
with one.
Larry
You will need two original keys to do it yourself. Dealer can do it
with one.
Larry