Removing RTV from Paint
Guest
Posts: n/a
Re: Removing RTV from Paint
Could be a type of Aircraft sealant (like
http://www.sacskyranch.com/faq_sealants/FAQ00007.htm ) in which case it
would be very hard to remove with out the use of a paint stripper or
sanding.
Snow
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A13499.BFA178C5@sympatico.ca...
> Then you don't have RTV there.....
>
> Maybe they used seam sealer or something really strong?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> SoK66 wrote:
> >
> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
> > erasers, old credit cards, alcohol and gasoline. Something has to work!
;-)
> >
> > "Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
> > news:41a0d2a2_1@newsfeed.slurp.net...
> > > Rub it with your finger for a bit and it should rub off. Failing that,
try
> > > rubbing alcohol and a rag, failing that, try gasoline and a rag.
> > >
> > > HTH.
> > >
> > > Carl
> > >
> > >
> > > "SoK66" <SoK66@frontier.net> wrote in message
> > > news:cnqao201cji@enews4.newsguy.com...
> > >> All,
> > >>
> > >> Need some advice on the best way to get residual RTV off of the paint
on
> > > my
> > >> '94 YJ.
> > >>
> > >> I had some Avalanche (now Poison Spyder) rocker guards installed back
in
> > >> '01. They came in raw metal, no paint, powder coat, etc. I pulled
them
> > >> off
> > > a
> > >> few weeks ago to have them powdercoated and found to my dismay that
the
> > >> genius at Avalanche who installed only painted the outsides, and
mounted
> > >> them with raw metal against the body. Naturally the inside was
severely
> > >> rusted. Fortunately the rust didn''t eat into the body and I was able
to
> > >> clean it all up ok.
> > >>
> > >> My big problem, he also sealed the tops of the guards with thick
beads of
> > >> black RTV. I was able to gently slice the beads off of the body
without
> > >> tearing anything up, however now I have a thin residue of RTV stuck
to
> > >> the
> > >> paint and I can't find any way to get it off without sanding through
the
> > >> clear and color coats. This was one of the dumbest things I've ever
seen
> > >> a
> > >> supposedly top of the line shop do. Anyone got any ideas?
> > >>
> > >>
> > >
> > >
http://www.sacskyranch.com/faq_sealants/FAQ00007.htm ) in which case it
would be very hard to remove with out the use of a paint stripper or
sanding.
Snow
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A13499.BFA178C5@sympatico.ca...
> Then you don't have RTV there.....
>
> Maybe they used seam sealer or something really strong?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> SoK66 wrote:
> >
> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
> > erasers, old credit cards, alcohol and gasoline. Something has to work!
;-)
> >
> > "Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
> > news:41a0d2a2_1@newsfeed.slurp.net...
> > > Rub it with your finger for a bit and it should rub off. Failing that,
try
> > > rubbing alcohol and a rag, failing that, try gasoline and a rag.
> > >
> > > HTH.
> > >
> > > Carl
> > >
> > >
> > > "SoK66" <SoK66@frontier.net> wrote in message
> > > news:cnqao201cji@enews4.newsguy.com...
> > >> All,
> > >>
> > >> Need some advice on the best way to get residual RTV off of the paint
on
> > > my
> > >> '94 YJ.
> > >>
> > >> I had some Avalanche (now Poison Spyder) rocker guards installed back
in
> > >> '01. They came in raw metal, no paint, powder coat, etc. I pulled
them
> > >> off
> > > a
> > >> few weeks ago to have them powdercoated and found to my dismay that
the
> > >> genius at Avalanche who installed only painted the outsides, and
mounted
> > >> them with raw metal against the body. Naturally the inside was
severely
> > >> rusted. Fortunately the rust didn''t eat into the body and I was able
to
> > >> clean it all up ok.
> > >>
> > >> My big problem, he also sealed the tops of the guards with thick
beads of
> > >> black RTV. I was able to gently slice the beads off of the body
without
> > >> tearing anything up, however now I have a thin residue of RTV stuck
to
> > >> the
> > >> paint and I can't find any way to get it off without sanding through
the
> > >> clear and color coats. This was one of the dumbest things I've ever
seen
> > >> a
> > >> supposedly top of the line shop do. Anyone got any ideas?
> > >>
> > >>
> > >
> > >
Guest
Posts: n/a
Re: Removing RTV from Paint
Could be a type of Aircraft sealant (like
http://www.sacskyranch.com/faq_sealants/FAQ00007.htm ) in which case it
would be very hard to remove with out the use of a paint stripper or
sanding.
Snow
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A13499.BFA178C5@sympatico.ca...
> Then you don't have RTV there.....
>
> Maybe they used seam sealer or something really strong?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> SoK66 wrote:
> >
> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
> > erasers, old credit cards, alcohol and gasoline. Something has to work!
;-)
> >
> > "Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
> > news:41a0d2a2_1@newsfeed.slurp.net...
> > > Rub it with your finger for a bit and it should rub off. Failing that,
try
> > > rubbing alcohol and a rag, failing that, try gasoline and a rag.
> > >
> > > HTH.
> > >
> > > Carl
> > >
> > >
> > > "SoK66" <SoK66@frontier.net> wrote in message
> > > news:cnqao201cji@enews4.newsguy.com...
> > >> All,
> > >>
> > >> Need some advice on the best way to get residual RTV off of the paint
on
> > > my
> > >> '94 YJ.
> > >>
> > >> I had some Avalanche (now Poison Spyder) rocker guards installed back
in
> > >> '01. They came in raw metal, no paint, powder coat, etc. I pulled
them
> > >> off
> > > a
> > >> few weeks ago to have them powdercoated and found to my dismay that
the
> > >> genius at Avalanche who installed only painted the outsides, and
mounted
> > >> them with raw metal against the body. Naturally the inside was
severely
> > >> rusted. Fortunately the rust didn''t eat into the body and I was able
to
> > >> clean it all up ok.
> > >>
> > >> My big problem, he also sealed the tops of the guards with thick
beads of
> > >> black RTV. I was able to gently slice the beads off of the body
without
> > >> tearing anything up, however now I have a thin residue of RTV stuck
to
> > >> the
> > >> paint and I can't find any way to get it off without sanding through
the
> > >> clear and color coats. This was one of the dumbest things I've ever
seen
> > >> a
> > >> supposedly top of the line shop do. Anyone got any ideas?
> > >>
> > >>
> > >
> > >
http://www.sacskyranch.com/faq_sealants/FAQ00007.htm ) in which case it
would be very hard to remove with out the use of a paint stripper or
sanding.
Snow
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A13499.BFA178C5@sympatico.ca...
> Then you don't have RTV there.....
>
> Maybe they used seam sealer or something really strong?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> SoK66 wrote:
> >
> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
> > erasers, old credit cards, alcohol and gasoline. Something has to work!
;-)
> >
> > "Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
> > news:41a0d2a2_1@newsfeed.slurp.net...
> > > Rub it with your finger for a bit and it should rub off. Failing that,
try
> > > rubbing alcohol and a rag, failing that, try gasoline and a rag.
> > >
> > > HTH.
> > >
> > > Carl
> > >
> > >
> > > "SoK66" <SoK66@frontier.net> wrote in message
> > > news:cnqao201cji@enews4.newsguy.com...
> > >> All,
> > >>
> > >> Need some advice on the best way to get residual RTV off of the paint
on
> > > my
> > >> '94 YJ.
> > >>
> > >> I had some Avalanche (now Poison Spyder) rocker guards installed back
in
> > >> '01. They came in raw metal, no paint, powder coat, etc. I pulled
them
> > >> off
> > > a
> > >> few weeks ago to have them powdercoated and found to my dismay that
the
> > >> genius at Avalanche who installed only painted the outsides, and
mounted
> > >> them with raw metal against the body. Naturally the inside was
severely
> > >> rusted. Fortunately the rust didn''t eat into the body and I was able
to
> > >> clean it all up ok.
> > >>
> > >> My big problem, he also sealed the tops of the guards with thick
beads of
> > >> black RTV. I was able to gently slice the beads off of the body
without
> > >> tearing anything up, however now I have a thin residue of RTV stuck
to
> > >> the
> > >> paint and I can't find any way to get it off without sanding through
the
> > >> clear and color coats. This was one of the dumbest things I've ever
seen
> > >> a
> > >> supposedly top of the line shop do. Anyone got any ideas?
> > >>
> > >>
> > >
> > >
Guest
Posts: n/a
Re: Removing RTV from Paint
Could be a type of Aircraft sealant (like
http://www.sacskyranch.com/faq_sealants/FAQ00007.htm ) in which case it
would be very hard to remove with out the use of a paint stripper or
sanding.
Snow
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A13499.BFA178C5@sympatico.ca...
> Then you don't have RTV there.....
>
> Maybe they used seam sealer or something really strong?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> SoK66 wrote:
> >
> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
> > erasers, old credit cards, alcohol and gasoline. Something has to work!
;-)
> >
> > "Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
> > news:41a0d2a2_1@newsfeed.slurp.net...
> > > Rub it with your finger for a bit and it should rub off. Failing that,
try
> > > rubbing alcohol and a rag, failing that, try gasoline and a rag.
> > >
> > > HTH.
> > >
> > > Carl
> > >
> > >
> > > "SoK66" <SoK66@frontier.net> wrote in message
> > > news:cnqao201cji@enews4.newsguy.com...
> > >> All,
> > >>
> > >> Need some advice on the best way to get residual RTV off of the paint
on
> > > my
> > >> '94 YJ.
> > >>
> > >> I had some Avalanche (now Poison Spyder) rocker guards installed back
in
> > >> '01. They came in raw metal, no paint, powder coat, etc. I pulled
them
> > >> off
> > > a
> > >> few weeks ago to have them powdercoated and found to my dismay that
the
> > >> genius at Avalanche who installed only painted the outsides, and
mounted
> > >> them with raw metal against the body. Naturally the inside was
severely
> > >> rusted. Fortunately the rust didn''t eat into the body and I was able
to
> > >> clean it all up ok.
> > >>
> > >> My big problem, he also sealed the tops of the guards with thick
beads of
> > >> black RTV. I was able to gently slice the beads off of the body
without
> > >> tearing anything up, however now I have a thin residue of RTV stuck
to
> > >> the
> > >> paint and I can't find any way to get it off without sanding through
the
> > >> clear and color coats. This was one of the dumbest things I've ever
seen
> > >> a
> > >> supposedly top of the line shop do. Anyone got any ideas?
> > >>
> > >>
> > >
> > >
http://www.sacskyranch.com/faq_sealants/FAQ00007.htm ) in which case it
would be very hard to remove with out the use of a paint stripper or
sanding.
Snow
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A13499.BFA178C5@sympatico.ca...
> Then you don't have RTV there.....
>
> Maybe they used seam sealer or something really strong?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> SoK66 wrote:
> >
> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
> > erasers, old credit cards, alcohol and gasoline. Something has to work!
;-)
> >
> > "Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
> > news:41a0d2a2_1@newsfeed.slurp.net...
> > > Rub it with your finger for a bit and it should rub off. Failing that,
try
> > > rubbing alcohol and a rag, failing that, try gasoline and a rag.
> > >
> > > HTH.
> > >
> > > Carl
> > >
> > >
> > > "SoK66" <SoK66@frontier.net> wrote in message
> > > news:cnqao201cji@enews4.newsguy.com...
> > >> All,
> > >>
> > >> Need some advice on the best way to get residual RTV off of the paint
on
> > > my
> > >> '94 YJ.
> > >>
> > >> I had some Avalanche (now Poison Spyder) rocker guards installed back
in
> > >> '01. They came in raw metal, no paint, powder coat, etc. I pulled
them
> > >> off
> > > a
> > >> few weeks ago to have them powdercoated and found to my dismay that
the
> > >> genius at Avalanche who installed only painted the outsides, and
mounted
> > >> them with raw metal against the body. Naturally the inside was
severely
> > >> rusted. Fortunately the rust didn''t eat into the body and I was able
to
> > >> clean it all up ok.
> > >>
> > >> My big problem, he also sealed the tops of the guards with thick
beads of
> > >> black RTV. I was able to gently slice the beads off of the body
without
> > >> tearing anything up, however now I have a thin residue of RTV stuck
to
> > >> the
> > >> paint and I can't find any way to get it off without sanding through
the
> > >> clear and color coats. This was one of the dumbest things I've ever
seen
> > >> a
> > >> supposedly top of the line shop do. Anyone got any ideas?
> > >>
> > >>
> > >
> > >
Guest
Posts: n/a
Re: Removing RTV from Paint
Thanks, Dave, I didn't consider my question inappropriate.
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:lM8od.20012$up1.19508@text.news.blueyonder.co .uk...
> Jeez, Bill, what's trolling about that question ?
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41A11431.8700167C@***.net...
>> Whatever you have, troll, on your paint, it's not "Room-Temperature
>> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
>> easy of clean up, like when we pull a pan, after years of a good seal,
>> the stuff comes off like pulling off a rubber band, with our fingers.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> SoK66 wrote:
>> >
>> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> > erasers, old credit cards, alcohol and gasoline. Something has to work!
> ;-)
>
>
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:lM8od.20012$up1.19508@text.news.blueyonder.co .uk...
> Jeez, Bill, what's trolling about that question ?
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41A11431.8700167C@***.net...
>> Whatever you have, troll, on your paint, it's not "Room-Temperature
>> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
>> easy of clean up, like when we pull a pan, after years of a good seal,
>> the stuff comes off like pulling off a rubber band, with our fingers.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> SoK66 wrote:
>> >
>> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> > erasers, old credit cards, alcohol and gasoline. Something has to work!
> ;-)
>
>
Guest
Posts: n/a
Re: Removing RTV from Paint
Thanks, Dave, I didn't consider my question inappropriate.
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:lM8od.20012$up1.19508@text.news.blueyonder.co .uk...
> Jeez, Bill, what's trolling about that question ?
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41A11431.8700167C@***.net...
>> Whatever you have, troll, on your paint, it's not "Room-Temperature
>> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
>> easy of clean up, like when we pull a pan, after years of a good seal,
>> the stuff comes off like pulling off a rubber band, with our fingers.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> SoK66 wrote:
>> >
>> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> > erasers, old credit cards, alcohol and gasoline. Something has to work!
> ;-)
>
>
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:lM8od.20012$up1.19508@text.news.blueyonder.co .uk...
> Jeez, Bill, what's trolling about that question ?
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41A11431.8700167C@***.net...
>> Whatever you have, troll, on your paint, it's not "Room-Temperature
>> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
>> easy of clean up, like when we pull a pan, after years of a good seal,
>> the stuff comes off like pulling off a rubber band, with our fingers.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> SoK66 wrote:
>> >
>> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> > erasers, old credit cards, alcohol and gasoline. Something has to work!
> ;-)
>
>
Guest
Posts: n/a
Re: Removing RTV from Paint
Thanks, Dave, I didn't consider my question inappropriate.
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:lM8od.20012$up1.19508@text.news.blueyonder.co .uk...
> Jeez, Bill, what's trolling about that question ?
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41A11431.8700167C@***.net...
>> Whatever you have, troll, on your paint, it's not "Room-Temperature
>> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
>> easy of clean up, like when we pull a pan, after years of a good seal,
>> the stuff comes off like pulling off a rubber band, with our fingers.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> SoK66 wrote:
>> >
>> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> > erasers, old credit cards, alcohol and gasoline. Something has to work!
> ;-)
>
>
"Dave Milne" <jeep@_nospam_milne.info> wrote in message
news:lM8od.20012$up1.19508@text.news.blueyonder.co .uk...
> Jeez, Bill, what's trolling about that question ?
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:41A11431.8700167C@***.net...
>> Whatever you have, troll, on your paint, it's not "Room-Temperature
>> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
>> easy of clean up, like when we pull a pan, after years of a good seal,
>> the stuff comes off like pulling off a rubber band, with our fingers.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> SoK66 wrote:
>> >
>> > Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> > erasers, old credit cards, alcohol and gasoline. Something has to work!
> ;-)
>
>
Guest
Posts: n/a
Re: Removing RTV from Paint
What I have, BILL, is standard black RTV which was inappropriately used to
seal the rocker guards against the paint. As I explained in my original
post, after a struggle I got it loose from the bare metal on the guard, but
it's stuck fast to the paint. I can't just scrape it off as you'd do on
mating surfaces.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41A11431.8700167C@***.net...
> Whatever you have, troll, on your paint, it's not "Room-Temperature
> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
> easy of clean up, like when we pull a pan, after years of a good seal,
> the stuff comes off like pulling off a rubber band, with our fingers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> SoK66 wrote:
>>
>> Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> erasers, old credit cards, alcohol and gasoline. Something has to work!
>> ;-)
seal the rocker guards against the paint. As I explained in my original
post, after a struggle I got it loose from the bare metal on the guard, but
it's stuck fast to the paint. I can't just scrape it off as you'd do on
mating surfaces.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41A11431.8700167C@***.net...
> Whatever you have, troll, on your paint, it's not "Room-Temperature
> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
> easy of clean up, like when we pull a pan, after years of a good seal,
> the stuff comes off like pulling off a rubber band, with our fingers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> SoK66 wrote:
>>
>> Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> erasers, old credit cards, alcohol and gasoline. Something has to work!
>> ;-)
Guest
Posts: n/a
Re: Removing RTV from Paint
What I have, BILL, is standard black RTV which was inappropriately used to
seal the rocker guards against the paint. As I explained in my original
post, after a struggle I got it loose from the bare metal on the guard, but
it's stuck fast to the paint. I can't just scrape it off as you'd do on
mating surfaces.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41A11431.8700167C@***.net...
> Whatever you have, troll, on your paint, it's not "Room-Temperature
> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
> easy of clean up, like when we pull a pan, after years of a good seal,
> the stuff comes off like pulling off a rubber band, with our fingers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> SoK66 wrote:
>>
>> Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> erasers, old credit cards, alcohol and gasoline. Something has to work!
>> ;-)
seal the rocker guards against the paint. As I explained in my original
post, after a struggle I got it loose from the bare metal on the guard, but
it's stuck fast to the paint. I can't just scrape it off as you'd do on
mating surfaces.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41A11431.8700167C@***.net...
> Whatever you have, troll, on your paint, it's not "Room-Temperature
> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
> easy of clean up, like when we pull a pan, after years of a good seal,
> the stuff comes off like pulling off a rubber band, with our fingers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> SoK66 wrote:
>>
>> Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> erasers, old credit cards, alcohol and gasoline. Something has to work!
>> ;-)
Guest
Posts: n/a
Re: Removing RTV from Paint
What I have, BILL, is standard black RTV which was inappropriately used to
seal the rocker guards against the paint. As I explained in my original
post, after a struggle I got it loose from the bare metal on the guard, but
it's stuck fast to the paint. I can't just scrape it off as you'd do on
mating surfaces.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41A11431.8700167C@***.net...
> Whatever you have, troll, on your paint, it's not "Room-Temperature
> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
> easy of clean up, like when we pull a pan, after years of a good seal,
> the stuff comes off like pulling off a rubber band, with our fingers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> SoK66 wrote:
>>
>> Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> erasers, old credit cards, alcohol and gasoline. Something has to work!
>> ;-)
seal the rocker guards against the paint. As I explained in my original
post, after a struggle I got it loose from the bare metal on the guard, but
it's stuck fast to the paint. I can't just scrape it off as you'd do on
mating surfaces.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41A11431.8700167C@***.net...
> Whatever you have, troll, on your paint, it's not "Room-Temperature
> Vulcanizing". That's the mean reason we use Permatex Silicone, for it's
> easy of clean up, like when we pull a pan, after years of a good seal,
> the stuff comes off like pulling off a rubber band, with our fingers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> SoK66 wrote:
>>
>> Thanks everyone for your feedback. So far I've got "nothing", fingers,
>> erasers, old credit cards, alcohol and gasoline. Something has to work!
>> ;-)
Guest
Posts: n/a
Re: Removing RTV from Paint
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A13499.BFA178C5@sympatico.ca...
> Then you don't have RTV there.....>
It is indeed black RTV. Easy to identify anyway, but I confirmed it with the
installers.
