Removing Rear Seat Belts
02-10-2007, 10:36 PM
#41
Guest
Posts: n/a
Re: Removing Rear Seat Belts
They are the same as on the front bumper, 55.
"Frank_v7.0" <none@no.net> wrote in message
news:9bszh.2478$ya1.2077@news02.roc.ny...
>I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>remove the center seat belts and bracket I found what appears to be a huge
>torx headed bolt holding the assembly down. I've got a few torx
>screwdrivers, but this is way larger than anything I've got. I suspect I'm
>going to have to get something to use with my 3/8" driver. Any idea what
>size this monster is?
> --
> FRH
"Frank_v7.0" <none@no.net> wrote in message
news:9bszh.2478$ya1.2077@news02.roc.ny...
>I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>remove the center seat belts and bracket I found what appears to be a huge
>torx headed bolt holding the assembly down. I've got a few torx
>screwdrivers, but this is way larger than anything I've got. I suspect I'm
>going to have to get something to use with my 3/8" driver. Any idea what
>size this monster is?
> --
> FRH
02-10-2007, 10:36 PM
#42
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Just keep the Hurculiner off your Hootus.
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqltje$d1u$1@aioe.org...
> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
> have any experience with it?
>
>
> Harkin wrote:
>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>> remove the center seat belts and bracket I found what appears to be a
>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>> what size this monster is?
>>> --
>>> FRH
>>
>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>> rhino'd.
>>
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqltje$d1u$1@aioe.org...
> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
> have any experience with it?
>
>
> Harkin wrote:
>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>> remove the center seat belts and bracket I found what appears to be a
>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>> what size this monster is?
>>> --
>>> FRH
>>
>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>> rhino'd.
>>
02-10-2007, 10:36 PM
#43
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Just keep the Hurculiner off your Hootus.
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqltje$d1u$1@aioe.org...
> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
> have any experience with it?
>
>
> Harkin wrote:
>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>> remove the center seat belts and bracket I found what appears to be a
>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>> what size this monster is?
>>> --
>>> FRH
>>
>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>> rhino'd.
>>
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqltje$d1u$1@aioe.org...
> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
> have any experience with it?
>
>
> Harkin wrote:
>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>> remove the center seat belts and bracket I found what appears to be a
>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>> what size this monster is?
>>> --
>>> FRH
>>
>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>> rhino'd.
>>
02-10-2007, 10:36 PM
#44
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Just keep the Hurculiner off your Hootus.
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqltje$d1u$1@aioe.org...
> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
> have any experience with it?
>
>
> Harkin wrote:
>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>> remove the center seat belts and bracket I found what appears to be a
>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>> what size this monster is?
>>> --
>>> FRH
>>
>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>> rhino'd.
>>
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqltje$d1u$1@aioe.org...
> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
> have any experience with it?
>
>
> Harkin wrote:
>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>> remove the center seat belts and bracket I found what appears to be a
>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>> what size this monster is?
>>> --
>>> FRH
>>
>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>> rhino'd.
>>
02-10-2007, 10:36 PM
#45
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Just keep the Hurculiner off your Hootus.
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqltje$d1u$1@aioe.org...
> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
> have any experience with it?
>
>
> Harkin wrote:
>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>> remove the center seat belts and bracket I found what appears to be a
>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>> what size this monster is?
>>> --
>>> FRH
>>
>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>> rhino'd.
>>
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqltje$d1u$1@aioe.org...
> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
> have any experience with it?
>
>
> Harkin wrote:
>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>> remove the center seat belts and bracket I found what appears to be a
>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>> what size this monster is?
>>> --
>>> FRH
>>
>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>> rhino'd.
>>
02-10-2007, 11:16 PM
#46
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Hey Coasty,
If you're driving by Blue Wind on your way home sometime this week,
would you mind stopping by and showing me the Herculiner?
Just look for a red Jeep...and an otherwise empty parking lot - if there
are too many customers, I won't be able to look at it.
You can get a sandwich while you're there, too - they're quite good.
I'll be wearing my Titleist hat.
Thanks!
Coasty wrote:
> I Herculined my 04 TJ did the interior with 3 coats including the door
> sills. It still looks great and has held up to the mud and water. It took
> a one gallon kit to do the job just make sure you follow directions. A
> friend did his TJ but did not take his time to use the proper cleaner
> (xylene) along with proper scuffing and it pealed in areas. If you do
> it in
> the summer it only takes about 2 hours between coats. Stripped out the
> interior on a Friday and by Sunday afternoon put everything back. I also
> bought an extra quart and did the fender wells.
>
> Coasty
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eqltje$d1u$1@aioe.org...
>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>> have any experience with it?
>>
>>
>> Harkin wrote:
>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>>> remove the center seat belts and bracket I found what appears to be a
>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>>> what size this monster is?
>>>> --
>>>> FRH
>>>
>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>> rhino'd.
>>>
>
If you're driving by Blue Wind on your way home sometime this week,
would you mind stopping by and showing me the Herculiner?
Just look for a red Jeep...and an otherwise empty parking lot - if there
are too many customers, I won't be able to look at it.
You can get a sandwich while you're there, too - they're quite good.
I'll be wearing my Titleist hat.
Thanks!
Coasty wrote:
> I Herculined my 04 TJ did the interior with 3 coats including the door
> sills. It still looks great and has held up to the mud and water. It took
> a one gallon kit to do the job just make sure you follow directions. A
> friend did his TJ but did not take his time to use the proper cleaner
> (xylene) along with proper scuffing and it pealed in areas. If you do
> it in
> the summer it only takes about 2 hours between coats. Stripped out the
> interior on a Friday and by Sunday afternoon put everything back. I also
> bought an extra quart and did the fender wells.
>
> Coasty
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eqltje$d1u$1@aioe.org...
>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>> have any experience with it?
>>
>>
>> Harkin wrote:
>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>>> remove the center seat belts and bracket I found what appears to be a
>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>>> what size this monster is?
>>>> --
>>>> FRH
>>>
>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>> rhino'd.
>>>
>
02-10-2007, 11:16 PM
#47
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Hey Coasty,
If you're driving by Blue Wind on your way home sometime this week,
would you mind stopping by and showing me the Herculiner?
Just look for a red Jeep...and an otherwise empty parking lot - if there
are too many customers, I won't be able to look at it.
You can get a sandwich while you're there, too - they're quite good.
I'll be wearing my Titleist hat.
Thanks!
Coasty wrote:
> I Herculined my 04 TJ did the interior with 3 coats including the door
> sills. It still looks great and has held up to the mud and water. It took
> a one gallon kit to do the job just make sure you follow directions. A
> friend did his TJ but did not take his time to use the proper cleaner
> (xylene) along with proper scuffing and it pealed in areas. If you do
> it in
> the summer it only takes about 2 hours between coats. Stripped out the
> interior on a Friday and by Sunday afternoon put everything back. I also
> bought an extra quart and did the fender wells.
>
> Coasty
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eqltje$d1u$1@aioe.org...
>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>> have any experience with it?
>>
>>
>> Harkin wrote:
>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>>> remove the center seat belts and bracket I found what appears to be a
>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>>> what size this monster is?
>>>> --
>>>> FRH
>>>
>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>> rhino'd.
>>>
>
If you're driving by Blue Wind on your way home sometime this week,
would you mind stopping by and showing me the Herculiner?
Just look for a red Jeep...and an otherwise empty parking lot - if there
are too many customers, I won't be able to look at it.
You can get a sandwich while you're there, too - they're quite good.
I'll be wearing my Titleist hat.
Thanks!
Coasty wrote:
> I Herculined my 04 TJ did the interior with 3 coats including the door
> sills. It still looks great and has held up to the mud and water. It took
> a one gallon kit to do the job just make sure you follow directions. A
> friend did his TJ but did not take his time to use the proper cleaner
> (xylene) along with proper scuffing and it pealed in areas. If you do
> it in
> the summer it only takes about 2 hours between coats. Stripped out the
> interior on a Friday and by Sunday afternoon put everything back. I also
> bought an extra quart and did the fender wells.
>
> Coasty
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eqltje$d1u$1@aioe.org...
>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>> have any experience with it?
>>
>>
>> Harkin wrote:
>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>>> remove the center seat belts and bracket I found what appears to be a
>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>>> what size this monster is?
>>>> --
>>>> FRH
>>>
>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>> rhino'd.
>>>
>
02-10-2007, 11:16 PM
#48
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Hey Coasty,
If you're driving by Blue Wind on your way home sometime this week,
would you mind stopping by and showing me the Herculiner?
Just look for a red Jeep...and an otherwise empty parking lot - if there
are too many customers, I won't be able to look at it.
You can get a sandwich while you're there, too - they're quite good.
I'll be wearing my Titleist hat.
Thanks!
Coasty wrote:
> I Herculined my 04 TJ did the interior with 3 coats including the door
> sills. It still looks great and has held up to the mud and water. It took
> a one gallon kit to do the job just make sure you follow directions. A
> friend did his TJ but did not take his time to use the proper cleaner
> (xylene) along with proper scuffing and it pealed in areas. If you do
> it in
> the summer it only takes about 2 hours between coats. Stripped out the
> interior on a Friday and by Sunday afternoon put everything back. I also
> bought an extra quart and did the fender wells.
>
> Coasty
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eqltje$d1u$1@aioe.org...
>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>> have any experience with it?
>>
>>
>> Harkin wrote:
>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>>> remove the center seat belts and bracket I found what appears to be a
>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>>> what size this monster is?
>>>> --
>>>> FRH
>>>
>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>> rhino'd.
>>>
>
If you're driving by Blue Wind on your way home sometime this week,
would you mind stopping by and showing me the Herculiner?
Just look for a red Jeep...and an otherwise empty parking lot - if there
are too many customers, I won't be able to look at it.
You can get a sandwich while you're there, too - they're quite good.
I'll be wearing my Titleist hat.
Thanks!
Coasty wrote:
> I Herculined my 04 TJ did the interior with 3 coats including the door
> sills. It still looks great and has held up to the mud and water. It took
> a one gallon kit to do the job just make sure you follow directions. A
> friend did his TJ but did not take his time to use the proper cleaner
> (xylene) along with proper scuffing and it pealed in areas. If you do
> it in
> the summer it only takes about 2 hours between coats. Stripped out the
> interior on a Friday and by Sunday afternoon put everything back. I also
> bought an extra quart and did the fender wells.
>
> Coasty
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eqltje$d1u$1@aioe.org...
>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>> have any experience with it?
>>
>>
>> Harkin wrote:
>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>>> remove the center seat belts and bracket I found what appears to be a
>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>>> what size this monster is?
>>>> --
>>>> FRH
>>>
>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>> rhino'd.
>>>
>
02-10-2007, 11:16 PM
#49
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Hey Coasty,
If you're driving by Blue Wind on your way home sometime this week,
would you mind stopping by and showing me the Herculiner?
Just look for a red Jeep...and an otherwise empty parking lot - if there
are too many customers, I won't be able to look at it.
You can get a sandwich while you're there, too - they're quite good.
I'll be wearing my Titleist hat.
Thanks!
Coasty wrote:
> I Herculined my 04 TJ did the interior with 3 coats including the door
> sills. It still looks great and has held up to the mud and water. It took
> a one gallon kit to do the job just make sure you follow directions. A
> friend did his TJ but did not take his time to use the proper cleaner
> (xylene) along with proper scuffing and it pealed in areas. If you do
> it in
> the summer it only takes about 2 hours between coats. Stripped out the
> interior on a Friday and by Sunday afternoon put everything back. I also
> bought an extra quart and did the fender wells.
>
> Coasty
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eqltje$d1u$1@aioe.org...
>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>> have any experience with it?
>>
>>
>> Harkin wrote:
>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>>> remove the center seat belts and bracket I found what appears to be a
>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>>> what size this monster is?
>>>> --
>>>> FRH
>>>
>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>> rhino'd.
>>>
>
If you're driving by Blue Wind on your way home sometime this week,
would you mind stopping by and showing me the Herculiner?
Just look for a red Jeep...and an otherwise empty parking lot - if there
are too many customers, I won't be able to look at it.
You can get a sandwich while you're there, too - they're quite good.
I'll be wearing my Titleist hat.
Thanks!
Coasty wrote:
> I Herculined my 04 TJ did the interior with 3 coats including the door
> sills. It still looks great and has held up to the mud and water. It took
> a one gallon kit to do the job just make sure you follow directions. A
> friend did his TJ but did not take his time to use the proper cleaner
> (xylene) along with proper scuffing and it pealed in areas. If you do
> it in
> the summer it only takes about 2 hours between coats. Stripped out the
> interior on a Friday and by Sunday afternoon put everything back. I also
> bought an extra quart and did the fender wells.
>
> Coasty
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eqltje$d1u$1@aioe.org...
>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>> have any experience with it?
>>
>>
>> Harkin wrote:
>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
>>>> remove the center seat belts and bracket I found what appears to be a
>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>> I'm going to have to get something to use with my 3/8" driver. Any idea
>>>> what size this monster is?
>>>> --
>>>> FRH
>>>
>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>> rhino'd.
>>>
>
02-11-2007, 11:01 AM
#50
Guest
Posts: n/a
Re: Removing Rear Seat Belts
I get out of work after 5pm if I see the jeep I pull in.
Coasty
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqm5b2$t5m$1@aioe.org...
> Hey Coasty,
> If you're driving by Blue Wind on your way home sometime this week, would
> you mind stopping by and showing me the Herculiner?
> Just look for a red Jeep...and an otherwise empty parking lot - if there
> are too many customers, I won't be able to look at it.
> You can get a sandwich while you're there, too - they're quite good. I'll
> be wearing my Titleist hat.
> Thanks!
>
> Coasty wrote:
>> I Herculined my 04 TJ did the interior with 3 coats including the door
>> sills. It still looks great and has held up to the mud and water. It
>> took
>> a one gallon kit to do the job just make sure you follow directions. A
>> friend did his TJ but did not take his time to use the proper cleaner
>> (xylene) along with proper scuffing and it pealed in areas. If you do it
>> in
>> the summer it only takes about 2 hours between coats. Stripped out the
>> interior on a Friday and by Sunday afternoon put everything back. I also
>> bought an extra quart and did the fender wells.
>>
>> Coasty
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eqltje$d1u$1@aioe.org...
>>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>>> have any experience with it?
>>>
>>>
>>> Harkin wrote:
>>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>>>>> to
>>>>> remove the center seat belts and bracket I found what appears to be a
>>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>>> I'm going to have to get something to use with my 3/8" driver. Any
>>>>> idea
>>>>> what size this monster is?
>>>>> --
>>>>> FRH
>>>>
>>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>>> rhino'd.
>>>>
>>
Coasty
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eqm5b2$t5m$1@aioe.org...
> Hey Coasty,
> If you're driving by Blue Wind on your way home sometime this week, would
> you mind stopping by and showing me the Herculiner?
> Just look for a red Jeep...and an otherwise empty parking lot - if there
> are too many customers, I won't be able to look at it.
> You can get a sandwich while you're there, too - they're quite good. I'll
> be wearing my Titleist hat.
> Thanks!
>
> Coasty wrote:
>> I Herculined my 04 TJ did the interior with 3 coats including the door
>> sills. It still looks great and has held up to the mud and water. It
>> took
>> a one gallon kit to do the job just make sure you follow directions. A
>> friend did his TJ but did not take his time to use the proper cleaner
>> (xylene) along with proper scuffing and it pealed in areas. If you do it
>> in
>> the summer it only takes about 2 hours between coats. Stripped out the
>> interior on a Friday and by Sunday afternoon put everything back. I also
>> bought an extra quart and did the fender wells.
>>
>> Coasty
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eqltje$d1u$1@aioe.org...
>>> Speaking of Rhinolining, I'm thinking of Herculining the YJs. Anybody
>>> have any experience with it?
>>>
>>>
>>> Harkin wrote:
>>>> On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
>>>>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>>>>> to
>>>>> remove the center seat belts and bracket I found what appears to be a
>>>>> huge torx headed bolt holding the assembly down. I've got a few torx
>>>>> screwdrivers, but this is way larger than anything I've got. I suspect
>>>>> I'm going to have to get something to use with my 3/8" driver. Any
>>>>> idea
>>>>> what size this monster is?
>>>>> --
>>>>> FRH
>>>>
>>>> I picked up a T50 to take mine out ('98 TJ though) before I had it
>>>> rhino'd.
>>>>
>>