Removing Rear Seat Belts
#11
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Unfortunately there are two raised tabs to the left and right where the
seat belt attaches to the bracket the torx holds down. No room for vise
grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
for a set of bits for my 3/8" driver. Thanks all.
Frank_v7.0 wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
--
FRH
seat belt attaches to the bracket the torx holds down. No room for vise
grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
for a set of bits for my 3/8" driver. Thanks all.
Frank_v7.0 wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
--
FRH
#12
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Unfortunately there are two raised tabs to the left and right where the
seat belt attaches to the bracket the torx holds down. No room for vise
grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
for a set of bits for my 3/8" driver. Thanks all.
Frank_v7.0 wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
--
FRH
seat belt attaches to the bracket the torx holds down. No room for vise
grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
for a set of bits for my 3/8" driver. Thanks all.
Frank_v7.0 wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
--
FRH
#13
Guest
Posts: n/a
Re: Removing Rear Seat Belts
Unfortunately there are two raised tabs to the left and right where the
seat belt attaches to the bracket the torx holds down. No room for vise
grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
for a set of bits for my 3/8" driver. Thanks all.
Frank_v7.0 wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
--
FRH
seat belt attaches to the bracket the torx holds down. No room for vise
grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
for a set of bits for my 3/8" driver. Thanks all.
Frank_v7.0 wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
--
FRH
#14
Guest
Posts: n/a
Re: Removing Rear Seat Belts
My YJ is a T55, I'm pretty sure.
Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>
Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>
#15
Guest
Posts: n/a
Re: Removing Rear Seat Belts
My YJ is a T55, I'm pretty sure.
Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>
Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>
#16
Guest
Posts: n/a
Re: Removing Rear Seat Belts
My YJ is a T55, I'm pretty sure.
Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>
Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>
#17
Guest
Posts: n/a
Re: Removing Rear Seat Belts
My YJ is a T55, I'm pretty sure.
Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>
Frank_v7.0 wrote:
> Unfortunately there are two raised tabs to the left and right where the
> seat belt attaches to the bracket the torx holds down. No room for vise
> grips. :-( I'll swing by KMart (They sell Craftsman tools now) and look
> for a set of bits for my 3/8" driver. Thanks all.
>
> Frank_v7.0 wrote:
>> I removed the rear seat on my '04 TJ and when I pulled up the carpet
>> to remove the center seat belts and bracket I found what appears to be
>> a huge torx headed bolt holding the assembly down. I've got a few torx
>> screwdrivers, but this is way larger than anything I've got. I suspect
>> I'm going to have to get something to use with my 3/8" driver. Any
>> idea what size this monster is?
>
#18
Guest
Posts: n/a
Re: Removing Rear Seat Belts
On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
> --
> FRH
I picked up a T50 to take mine out ('98 TJ though) before I had it
rhino'd.
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
> --
> FRH
I picked up a T50 to take mine out ('98 TJ though) before I had it
rhino'd.
#19
Guest
Posts: n/a
Re: Removing Rear Seat Belts
On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
> --
> FRH
I picked up a T50 to take mine out ('98 TJ though) before I had it
rhino'd.
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
> --
> FRH
I picked up a T50 to take mine out ('98 TJ though) before I had it
rhino'd.
#20
Guest
Posts: n/a
Re: Removing Rear Seat Belts
On Feb 10, 6:03 pm, "Frank_v7.0" <n...@no.net> wrote:
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
> --
> FRH
I picked up a T50 to take mine out ('98 TJ though) before I had it
rhino'd.
> I removed the rear seat on my '04 TJ and when I pulled up the carpet to
> remove the center seat belts and bracket I found what appears to be a
> huge torx headed bolt holding the assembly down. I've got a few torx
> screwdrivers, but this is way larger than anything I've got. I suspect
> I'm going to have to get something to use with my 3/8" driver. Any idea
> what size this monster is?
> --
> FRH
I picked up a T50 to take mine out ('98 TJ though) before I had it
rhino'd.