Removing CJ7 Dash Knobs
Guest
Posts: n/a
Removing CJ7 Dash *****
OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
it...
I'm trying to remove the factory dash ***** with Stainless ***** from
(everybody say it with me) JC Whitney.
How in God's name do you get the pulls for the Vent/Temp/Defrost off.
It looks like they used SuperGlue to lock them on the metal pulls!
Thanks in advance for the info
it...
I'm trying to remove the factory dash ***** with Stainless ***** from
(everybody say it with me) JC Whitney.
How in God's name do you get the pulls for the Vent/Temp/Defrost off.
It looks like they used SuperGlue to lock them on the metal pulls!
Thanks in advance for the info
Guest
Posts: n/a
Re: Removing CJ7 Dash *****
JeepGuyMike wrote:
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
A few years ago, my vent **** on my '84 CJ snapped off and I had to
replace the whole frickin' cable. What year CJ is yours? I'll look to
see if mine is even removable.
Pete
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
A few years ago, my vent **** on my '84 CJ snapped off and I had to
replace the whole frickin' cable. What year CJ is yours? I'll look to
see if mine is even removable.
Pete
Guest
Posts: n/a
Re: Removing CJ7 Dash *****
JeepGuyMike wrote:
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
A few years ago, my vent **** on my '84 CJ snapped off and I had to
replace the whole frickin' cable. What year CJ is yours? I'll look to
see if mine is even removable.
Pete
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
A few years ago, my vent **** on my '84 CJ snapped off and I had to
replace the whole frickin' cable. What year CJ is yours? I'll look to
see if mine is even removable.
Pete
Guest
Posts: n/a
Re: Removing CJ7 Dash *****
JeepGuyMike wrote:
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
A few years ago, my vent **** on my '84 CJ snapped off and I had to
replace the whole frickin' cable. What year CJ is yours? I'll look to
see if mine is even removable.
Pete
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
A few years ago, my vent **** on my '84 CJ snapped off and I had to
replace the whole frickin' cable. What year CJ is yours? I'll look to
see if mine is even removable.
Pete
Guest
Posts: n/a
Re: Removing CJ7 Dash *****
JeepGuyMike wrote:
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
A few years ago, my vent **** on my '84 CJ snapped off and I had to
replace the whole frickin' cable. What year CJ is yours? I'll look to
see if mine is even removable.
Pete
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
A few years ago, my vent **** on my '84 CJ snapped off and I had to
replace the whole frickin' cable. What year CJ is yours? I'll look to
see if mine is even removable.
Pete
Guest
Posts: n/a
Re: Removing CJ7 Dash *****
On Sep 3, 2:33 pm, Peter Stolz <pst...@sbcglobal.net> wrote:
> JeepGuyMike wrote:
> > OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> > it...
>
> > I'm trying to remove the factory dash ***** with Stainless ***** from
> > (everybody say it with me) JC Whitney.
>
> > How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> > It looks like they used SuperGlue to lock them on the metal pulls!
>
> > Thanks in advance for the info
>
> A few years ago, my vent **** on my '84 CJ snapped off and I had to
> replace the whole frickin' cable. What year CJ is yours? I'll look to
> see if mine is even removable.
> Pete
Did you rememebr to check for the little (and sometimes hard to see)
set screws that are used to hold the ***** onto the cable? You'll
need a pretty small allen wrench to loosen them. No matter if they
are JC Whitney or factory - I think that's the trick!
Good lucK
Lynn in Vancouver
> JeepGuyMike wrote:
> > OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> > it...
>
> > I'm trying to remove the factory dash ***** with Stainless ***** from
> > (everybody say it with me) JC Whitney.
>
> > How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> > It looks like they used SuperGlue to lock them on the metal pulls!
>
> > Thanks in advance for the info
>
> A few years ago, my vent **** on my '84 CJ snapped off and I had to
> replace the whole frickin' cable. What year CJ is yours? I'll look to
> see if mine is even removable.
> Pete
Did you rememebr to check for the little (and sometimes hard to see)
set screws that are used to hold the ***** onto the cable? You'll
need a pretty small allen wrench to loosen them. No matter if they
are JC Whitney or factory - I think that's the trick!
Good lucK
Lynn in Vancouver
Guest
Posts: n/a
Re: Removing CJ7 Dash *****
On Sep 3, 2:33 pm, Peter Stolz <pst...@sbcglobal.net> wrote:
> JeepGuyMike wrote:
> > OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> > it...
>
> > I'm trying to remove the factory dash ***** with Stainless ***** from
> > (everybody say it with me) JC Whitney.
>
> > How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> > It looks like they used SuperGlue to lock them on the metal pulls!
>
> > Thanks in advance for the info
>
> A few years ago, my vent **** on my '84 CJ snapped off and I had to
> replace the whole frickin' cable. What year CJ is yours? I'll look to
> see if mine is even removable.
> Pete
Did you rememebr to check for the little (and sometimes hard to see)
set screws that are used to hold the ***** onto the cable? You'll
need a pretty small allen wrench to loosen them. No matter if they
are JC Whitney or factory - I think that's the trick!
Good lucK
Lynn in Vancouver
> JeepGuyMike wrote:
> > OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> > it...
>
> > I'm trying to remove the factory dash ***** with Stainless ***** from
> > (everybody say it with me) JC Whitney.
>
> > How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> > It looks like they used SuperGlue to lock them on the metal pulls!
>
> > Thanks in advance for the info
>
> A few years ago, my vent **** on my '84 CJ snapped off and I had to
> replace the whole frickin' cable. What year CJ is yours? I'll look to
> see if mine is even removable.
> Pete
Did you rememebr to check for the little (and sometimes hard to see)
set screws that are used to hold the ***** onto the cable? You'll
need a pretty small allen wrench to loosen them. No matter if they
are JC Whitney or factory - I think that's the trick!
Good lucK
Lynn in Vancouver
Guest
Posts: n/a
Re: Removing CJ7 Dash *****
On Sep 3, 2:33 pm, Peter Stolz <pst...@sbcglobal.net> wrote:
> JeepGuyMike wrote:
> > OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> > it...
>
> > I'm trying to remove the factory dash ***** with Stainless ***** from
> > (everybody say it with me) JC Whitney.
>
> > How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> > It looks like they used SuperGlue to lock them on the metal pulls!
>
> > Thanks in advance for the info
>
> A few years ago, my vent **** on my '84 CJ snapped off and I had to
> replace the whole frickin' cable. What year CJ is yours? I'll look to
> see if mine is even removable.
> Pete
Did you rememebr to check for the little (and sometimes hard to see)
set screws that are used to hold the ***** onto the cable? You'll
need a pretty small allen wrench to loosen them. No matter if they
are JC Whitney or factory - I think that's the trick!
Good lucK
Lynn in Vancouver
> JeepGuyMike wrote:
> > OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> > it...
>
> > I'm trying to remove the factory dash ***** with Stainless ***** from
> > (everybody say it with me) JC Whitney.
>
> > How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> > It looks like they used SuperGlue to lock them on the metal pulls!
>
> > Thanks in advance for the info
>
> A few years ago, my vent **** on my '84 CJ snapped off and I had to
> replace the whole frickin' cable. What year CJ is yours? I'll look to
> see if mine is even removable.
> Pete
Did you rememebr to check for the little (and sometimes hard to see)
set screws that are used to hold the ***** onto the cable? You'll
need a pretty small allen wrench to loosen them. No matter if they
are JC Whitney or factory - I think that's the trick!
Good lucK
Lynn in Vancouver
Guest
Posts: n/a
Re: Removing CJ7 Dash *****
On Sep 3, 2:33 pm, Peter Stolz <pst...@sbcglobal.net> wrote:
> JeepGuyMike wrote:
> > OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> > it...
>
> > I'm trying to remove the factory dash ***** with Stainless ***** from
> > (everybody say it with me) JC Whitney.
>
> > How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> > It looks like they used SuperGlue to lock them on the metal pulls!
>
> > Thanks in advance for the info
>
> A few years ago, my vent **** on my '84 CJ snapped off and I had to
> replace the whole frickin' cable. What year CJ is yours? I'll look to
> see if mine is even removable.
> Pete
Did you rememebr to check for the little (and sometimes hard to see)
set screws that are used to hold the ***** onto the cable? You'll
need a pretty small allen wrench to loosen them. No matter if they
are JC Whitney or factory - I think that's the trick!
Good lucK
Lynn in Vancouver
> JeepGuyMike wrote:
> > OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> > it...
>
> > I'm trying to remove the factory dash ***** with Stainless ***** from
> > (everybody say it with me) JC Whitney.
>
> > How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> > It looks like they used SuperGlue to lock them on the metal pulls!
>
> > Thanks in advance for the info
>
> A few years ago, my vent **** on my '84 CJ snapped off and I had to
> replace the whole frickin' cable. What year CJ is yours? I'll look to
> see if mine is even removable.
> Pete
Did you rememebr to check for the little (and sometimes hard to see)
set screws that are used to hold the ***** onto the cable? You'll
need a pretty small allen wrench to loosen them. No matter if they
are JC Whitney or factory - I think that's the trick!
Good lucK
Lynn in Vancouver
Guest
Posts: n/a
Re: Removing CJ7 Dash *****
JeepGuyMike wrote:
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
My 86 has a locking tab on the back of the ***** that must be pushed
forward with a small screwdriver or strong fingernail from the bottom to
release them, all except the headlight switch which is a rod with a
button on the back of the switch to release it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> OK, In the middle of a Rolling Nightmare, but I THINK I'll live thru
> it...
>
> I'm trying to remove the factory dash ***** with Stainless ***** from
> (everybody say it with me) JC Whitney.
>
> How in God's name do you get the pulls for the Vent/Temp/Defrost off.
> It looks like they used SuperGlue to lock them on the metal pulls!
>
> Thanks in advance for the info
>
My 86 has a locking tab on the back of the ***** that must be pushed
forward with a small screwdriver or strong fingernail from the bottom to
release them, all except the headlight switch which is a rod with a
button on the back of the switch to release it.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
