Recessed LED Tailights?
10-02-2003, 11:05 AM
#31
Guest
Posts: n/a
Re: Recessed LED Tailights?
I highly recomend these lights. You can either get them from Jay at
www.mesa4x4.com or www.led-r-us.com.
Brand Howard
www.jeeproject.com
> Thanks! These are what I was looking for. 61 LEDs per light with the
> rubber grommit fit.
> t Servers
www.mesa4x4.com or www.led-r-us.com.
Brand Howard
www.jeeproject.com
> Thanks! These are what I was looking for. 61 LEDs per light with the
> rubber grommit fit.
> t Servers
10-02-2003, 11:10 AM
#32
Guest
Posts: n/a
Re: Recessed LED Tailights?
In article <3F7C31BA.AD10724@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
> Jeepers wrote:
> > Thanks! These are what I was looking for. 61 LEDs per light with the
> > rubber grommit fit.
> >
>
> How are you going to light up your license plate?
>
> Mike
Since I haven't decided where the plate is gonna go, I'm not sure yet.
I'm looking at inside the spare, but I wanted a third TL there. Then,
there is on the bumper, in which case I'll use a small LED or bulb
pointed at it. This is a build from the ground up and I'm also moving
the fuel filler to the side. I had filled the fuel hole, old spare rack
holes and taillight holes in order to install "custom" strip style leds
but I decided that the strip LED were going to be a monumental
installation pain:
http://64.91.240.195/index.php?cPath...1ca159534846de
0dd278c6f
I'm going to start on the tub soon. Currently it's hanging from the
rafters in my shop by tie downs. I gotta cut the tail light and fuel
filler holes. Add the Warn rocker guards. Cut the hole for the heater
fan upgrade. Finish the shifter fitting hole. Then all the pieces are
going to a painter for primer and a coat of green. Then I havta decide
where to herc and where not to herc. Then reassemble. But first I have
to finish the frame. All it needs is a fuel pump, filter and a reroute
of one line for the MPI. Then there is the issue of my hydralic cluth
not lining up with the fork, then...
http://sprite.viptx.net/~moomesa/NEWJEEP.html
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Mike Romain <romainm@sympatico.ca> wrote:
> Jeepers wrote:
> > Thanks! These are what I was looking for. 61 LEDs per light with the
> > rubber grommit fit.
> >
>
> How are you going to light up your license plate?
>
> Mike
Since I haven't decided where the plate is gonna go, I'm not sure yet.
I'm looking at inside the spare, but I wanted a third TL there. Then,
there is on the bumper, in which case I'll use a small LED or bulb
pointed at it. This is a build from the ground up and I'm also moving
the fuel filler to the side. I had filled the fuel hole, old spare rack
holes and taillight holes in order to install "custom" strip style leds
but I decided that the strip LED were going to be a monumental
installation pain:
http://64.91.240.195/index.php?cPath...1ca159534846de
0dd278c6f
I'm going to start on the tub soon. Currently it's hanging from the
rafters in my shop by tie downs. I gotta cut the tail light and fuel
filler holes. Add the Warn rocker guards. Cut the hole for the heater
fan upgrade. Finish the shifter fitting hole. Then all the pieces are
going to a painter for primer and a coat of green. Then I havta decide
where to herc and where not to herc. Then reassemble. But first I have
to finish the frame. All it needs is a fuel pump, filter and a reroute
of one line for the MPI. Then there is the issue of my hydralic cluth
not lining up with the fork, then...
http://sprite.viptx.net/~moomesa/NEWJEEP.html
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-02-2003, 11:10 AM
#33
Guest
Posts: n/a
Re: Recessed LED Tailights?
In article <3F7C31BA.AD10724@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
> Jeepers wrote:
> > Thanks! These are what I was looking for. 61 LEDs per light with the
> > rubber grommit fit.
> >
>
> How are you going to light up your license plate?
>
> Mike
Since I haven't decided where the plate is gonna go, I'm not sure yet.
I'm looking at inside the spare, but I wanted a third TL there. Then,
there is on the bumper, in which case I'll use a small LED or bulb
pointed at it. This is a build from the ground up and I'm also moving
the fuel filler to the side. I had filled the fuel hole, old spare rack
holes and taillight holes in order to install "custom" strip style leds
but I decided that the strip LED were going to be a monumental
installation pain:
http://64.91.240.195/index.php?cPath...1ca159534846de
0dd278c6f
I'm going to start on the tub soon. Currently it's hanging from the
rafters in my shop by tie downs. I gotta cut the tail light and fuel
filler holes. Add the Warn rocker guards. Cut the hole for the heater
fan upgrade. Finish the shifter fitting hole. Then all the pieces are
going to a painter for primer and a coat of green. Then I havta decide
where to herc and where not to herc. Then reassemble. But first I have
to finish the frame. All it needs is a fuel pump, filter and a reroute
of one line for the MPI. Then there is the issue of my hydralic cluth
not lining up with the fork, then...
http://sprite.viptx.net/~moomesa/NEWJEEP.html
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Mike Romain <romainm@sympatico.ca> wrote:
> Jeepers wrote:
> > Thanks! These are what I was looking for. 61 LEDs per light with the
> > rubber grommit fit.
> >
>
> How are you going to light up your license plate?
>
> Mike
Since I haven't decided where the plate is gonna go, I'm not sure yet.
I'm looking at inside the spare, but I wanted a third TL there. Then,
there is on the bumper, in which case I'll use a small LED or bulb
pointed at it. This is a build from the ground up and I'm also moving
the fuel filler to the side. I had filled the fuel hole, old spare rack
holes and taillight holes in order to install "custom" strip style leds
but I decided that the strip LED were going to be a monumental
installation pain:
http://64.91.240.195/index.php?cPath...1ca159534846de
0dd278c6f
I'm going to start on the tub soon. Currently it's hanging from the
rafters in my shop by tie downs. I gotta cut the tail light and fuel
filler holes. Add the Warn rocker guards. Cut the hole for the heater
fan upgrade. Finish the shifter fitting hole. Then all the pieces are
going to a painter for primer and a coat of green. Then I havta decide
where to herc and where not to herc. Then reassemble. But first I have
to finish the frame. All it needs is a fuel pump, filter and a reroute
of one line for the MPI. Then there is the issue of my hydralic cluth
not lining up with the fork, then...
http://sprite.viptx.net/~moomesa/NEWJEEP.html
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-02-2003, 11:42 AM
#34
Guest
Posts: n/a
Re: Recessed LED Tailights?
You need to consider your side marker lights, too. There are LED lights
that will serve this purpose pretty well, too. Just don't forget it or you
may find yourself on the wrong side of inspection or a gentleman in a patrol
car... ;-)
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Brand Howard" <brand@jeeproject.com> wrote in message
news:x6Xeb.1480$sf6.1098@newssvr22.news.prodigy.co m...
> I left my plate in the factory location for the time being and have not
been
> hassled by the police about it yet. I am going to address the license
plate
> light when I build my front and rear bumpers.
>
> Brand Howard
> www.jeeproject.com
>
>
> > How are you going to light up your license plate?
> >
> > Mike
>
>
that will serve this purpose pretty well, too. Just don't forget it or you
may find yourself on the wrong side of inspection or a gentleman in a patrol
car... ;-)
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Brand Howard" <brand@jeeproject.com> wrote in message
news:x6Xeb.1480$sf6.1098@newssvr22.news.prodigy.co m...
> I left my plate in the factory location for the time being and have not
been
> hassled by the police about it yet. I am going to address the license
plate
> light when I build my front and rear bumpers.
>
> Brand Howard
> www.jeeproject.com
>
>
> > How are you going to light up your license plate?
> >
> > Mike
>
>
10-02-2003, 11:42 AM
#35
Guest
Posts: n/a
Re: Recessed LED Tailights?
You need to consider your side marker lights, too. There are LED lights
that will serve this purpose pretty well, too. Just don't forget it or you
may find yourself on the wrong side of inspection or a gentleman in a patrol
car... ;-)
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Brand Howard" <brand@jeeproject.com> wrote in message
news:x6Xeb.1480$sf6.1098@newssvr22.news.prodigy.co m...
> I left my plate in the factory location for the time being and have not
been
> hassled by the police about it yet. I am going to address the license
plate
> light when I build my front and rear bumpers.
>
> Brand Howard
> www.jeeproject.com
>
>
> > How are you going to light up your license plate?
> >
> > Mike
>
>
that will serve this purpose pretty well, too. Just don't forget it or you
may find yourself on the wrong side of inspection or a gentleman in a patrol
car... ;-)
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Brand Howard" <brand@jeeproject.com> wrote in message
news:x6Xeb.1480$sf6.1098@newssvr22.news.prodigy.co m...
> I left my plate in the factory location for the time being and have not
been
> hassled by the police about it yet. I am going to address the license
plate
> light when I build my front and rear bumpers.
>
> Brand Howard
> www.jeeproject.com
>
>
> > How are you going to light up your license plate?
> >
> > Mike
>
>
10-02-2003, 12:44 PM
#36
Guest
Posts: n/a
Re: Recessed LED Tailights?
With a patrol car.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> How are you going to light up your license plate?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> How are you going to light up your license plate?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
10-02-2003, 12:44 PM
#37
Guest
Posts: n/a
Re: Recessed LED Tailights?
With a patrol car.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> How are you going to light up your license plate?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> How are you going to light up your license plate?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
10-02-2003, 12:48 PM
#38
Guest
Posts: n/a
Re: Recessed LED Tailights?
I thought that was important enough to add reflectors to side of my
Jeep: http://----------.com/46jeep.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
TJim wrote:
>
> You need to consider your side marker lights, too. There are LED lights
> that will serve this purpose pretty well, too. Just don't forget it or you
> may find yourself on the wrong side of inspection or a gentleman in a patrol
> car... ;-)
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
Jeep: http://----------.com/46jeep.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
TJim wrote:
>
> You need to consider your side marker lights, too. There are LED lights
> that will serve this purpose pretty well, too. Just don't forget it or you
> may find yourself on the wrong side of inspection or a gentleman in a patrol
> car... ;-)
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
10-02-2003, 12:48 PM
#39
Guest
Posts: n/a
Re: Recessed LED Tailights?
I thought that was important enough to add reflectors to side of my
Jeep: http://----------.com/46jeep.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
TJim wrote:
>
> You need to consider your side marker lights, too. There are LED lights
> that will serve this purpose pretty well, too. Just don't forget it or you
> may find yourself on the wrong side of inspection or a gentleman in a patrol
> car... ;-)
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
Jeep: http://----------.com/46jeep.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
TJim wrote:
>
> You need to consider your side marker lights, too. There are LED lights
> that will serve this purpose pretty well, too. Just don't forget it or you
> may find yourself on the wrong side of inspection or a gentleman in a patrol
> car... ;-)
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
Thread
Thread Starter
Forum
Replies
Last Post
Morris4x4Center
Morris 4x4 Center
0
04-29-2015 08:51 AM
PIAA
General Jeep and Tech Talk.
0
03-04-2013 02:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)