Rear diff swap
#21
Guest
Posts: n/a
Re: Re: Rear diff swap
Do you think the Wrangler he was looking at with the external locker
control would fit his garage?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
--
Posted via a free Usenet account from http://www.teranews.com
control would fit his garage?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
--
Posted via a free Usenet account from http://www.teranews.com
#22
Guest
Posts: n/a
Re: Re: Rear diff swap
I did read it, but people in Usenet never know what they want really. It
won't fit in the Libby housing, so changing the axle is the way to go. You
may complain about my ability to read, after you learn to spell properly.
Cheers.
Earle
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
>
> On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
> <----------@***.net> wrote:
>
> > Ditto, especially with that Mickey Mouse front end the Libby has, the
> >ratios would be wrong for sure.
> > God Bless America, Bill 0|||||||0
> >mailto:-------------------- http://www.----------.com/
> >
> >
> >"Earle Horton" <apodo@gracioso.usa> wrote in message
> >news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> >> Find out the track, or wheel to wheel width. If it is the same,
chances
> >are
> >> this can be done with a little welding. A cheaper alternative might be
to
> >> install a Trak-Loc into the Liberty.
> >>
> >> Earle
> >>
> >> "Socks" <socks09@shaw.ca> wrote in message
> >> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> >> > Good day,
> >> >
> >> > Today I was looking at late a model (2004 I think) Jeep Renagade.
It's
> >> > not so much that I am interested in buying the vehicle itself, but I
> >> > was wondering if I could swap the rear differential (with the dash
> >> > controled electronic lock) into my 2004 Jeep Liberty?
> >> > Any insight would be gratly appreciated
> >>
> >>
> -----------------
> TheSnoMan.com
won't fit in the Libby housing, so changing the axle is the way to go. You
may complain about my ability to read, after you learn to spell properly.
Cheers.
Earle
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
>
> On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
> <----------@***.net> wrote:
>
> > Ditto, especially with that Mickey Mouse front end the Libby has, the
> >ratios would be wrong for sure.
> > God Bless America, Bill 0|||||||0
> >mailto:-------------------- http://www.----------.com/
> >
> >
> >"Earle Horton" <apodo@gracioso.usa> wrote in message
> >news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> >> Find out the track, or wheel to wheel width. If it is the same,
chances
> >are
> >> this can be done with a little welding. A cheaper alternative might be
to
> >> install a Trak-Loc into the Liberty.
> >>
> >> Earle
> >>
> >> "Socks" <socks09@shaw.ca> wrote in message
> >> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> >> > Good day,
> >> >
> >> > Today I was looking at late a model (2004 I think) Jeep Renagade.
It's
> >> > not so much that I am interested in buying the vehicle itself, but I
> >> > was wondering if I could swap the rear differential (with the dash
> >> > controled electronic lock) into my 2004 Jeep Liberty?
> >> > Any insight would be gratly appreciated
> >>
> >>
> -----------------
> TheSnoMan.com
#23
Guest
Posts: n/a
Re: Re: Rear diff swap
I did read it, but people in Usenet never know what they want really. It
won't fit in the Libby housing, so changing the axle is the way to go. You
may complain about my ability to read, after you learn to spell properly.
Cheers.
Earle
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
>
> On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
> <----------@***.net> wrote:
>
> > Ditto, especially with that Mickey Mouse front end the Libby has, the
> >ratios would be wrong for sure.
> > God Bless America, Bill 0|||||||0
> >mailto:-------------------- http://www.----------.com/
> >
> >
> >"Earle Horton" <apodo@gracioso.usa> wrote in message
> >news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> >> Find out the track, or wheel to wheel width. If it is the same,
chances
> >are
> >> this can be done with a little welding. A cheaper alternative might be
to
> >> install a Trak-Loc into the Liberty.
> >>
> >> Earle
> >>
> >> "Socks" <socks09@shaw.ca> wrote in message
> >> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> >> > Good day,
> >> >
> >> > Today I was looking at late a model (2004 I think) Jeep Renagade.
It's
> >> > not so much that I am interested in buying the vehicle itself, but I
> >> > was wondering if I could swap the rear differential (with the dash
> >> > controled electronic lock) into my 2004 Jeep Liberty?
> >> > Any insight would be gratly appreciated
> >>
> >>
> -----------------
> TheSnoMan.com
won't fit in the Libby housing, so changing the axle is the way to go. You
may complain about my ability to read, after you learn to spell properly.
Cheers.
Earle
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
>
> On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
> <----------@***.net> wrote:
>
> > Ditto, especially with that Mickey Mouse front end the Libby has, the
> >ratios would be wrong for sure.
> > God Bless America, Bill 0|||||||0
> >mailto:-------------------- http://www.----------.com/
> >
> >
> >"Earle Horton" <apodo@gracioso.usa> wrote in message
> >news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> >> Find out the track, or wheel to wheel width. If it is the same,
chances
> >are
> >> this can be done with a little welding. A cheaper alternative might be
to
> >> install a Trak-Loc into the Liberty.
> >>
> >> Earle
> >>
> >> "Socks" <socks09@shaw.ca> wrote in message
> >> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> >> > Good day,
> >> >
> >> > Today I was looking at late a model (2004 I think) Jeep Renagade.
It's
> >> > not so much that I am interested in buying the vehicle itself, but I
> >> > was wondering if I could swap the rear differential (with the dash
> >> > controled electronic lock) into my 2004 Jeep Liberty?
> >> > Any insight would be gratly appreciated
> >>
> >>
> -----------------
> TheSnoMan.com
#24
Guest
Posts: n/a
Re: Re: Rear diff swap
I did read it, but people in Usenet never know what they want really. It
won't fit in the Libby housing, so changing the axle is the way to go. You
may complain about my ability to read, after you learn to spell properly.
Cheers.
Earle
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
>
> On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
> <----------@***.net> wrote:
>
> > Ditto, especially with that Mickey Mouse front end the Libby has, the
> >ratios would be wrong for sure.
> > God Bless America, Bill 0|||||||0
> >mailto:-------------------- http://www.----------.com/
> >
> >
> >"Earle Horton" <apodo@gracioso.usa> wrote in message
> >news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> >> Find out the track, or wheel to wheel width. If it is the same,
chances
> >are
> >> this can be done with a little welding. A cheaper alternative might be
to
> >> install a Trak-Loc into the Liberty.
> >>
> >> Earle
> >>
> >> "Socks" <socks09@shaw.ca> wrote in message
> >> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> >> > Good day,
> >> >
> >> > Today I was looking at late a model (2004 I think) Jeep Renagade.
It's
> >> > not so much that I am interested in buying the vehicle itself, but I
> >> > was wondering if I could swap the rear differential (with the dash
> >> > controled electronic lock) into my 2004 Jeep Liberty?
> >> > Any insight would be gratly appreciated
> >>
> >>
> -----------------
> TheSnoMan.com
won't fit in the Libby housing, so changing the axle is the way to go. You
may complain about my ability to read, after you learn to spell properly.
Cheers.
Earle
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
>
> On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
> <----------@***.net> wrote:
>
> > Ditto, especially with that Mickey Mouse front end the Libby has, the
> >ratios would be wrong for sure.
> > God Bless America, Bill 0|||||||0
> >mailto:-------------------- http://www.----------.com/
> >
> >
> >"Earle Horton" <apodo@gracioso.usa> wrote in message
> >news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> >> Find out the track, or wheel to wheel width. If it is the same,
chances
> >are
> >> this can be done with a little welding. A cheaper alternative might be
to
> >> install a Trak-Loc into the Liberty.
> >>
> >> Earle
> >>
> >> "Socks" <socks09@shaw.ca> wrote in message
> >> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> >> > Good day,
> >> >
> >> > Today I was looking at late a model (2004 I think) Jeep Renagade.
It's
> >> > not so much that I am interested in buying the vehicle itself, but I
> >> > was wondering if I could swap the rear differential (with the dash
> >> > controled electronic lock) into my 2004 Jeep Liberty?
> >> > Any insight would be gratly appreciated
> >>
> >>
> -----------------
> TheSnoMan.com
#25
Guest
Posts: n/a
Re: Re: Rear diff swap
I did read it, but people in Usenet never know what they want really. It
won't fit in the Libby housing, so changing the axle is the way to go. You
may complain about my ability to read, after you learn to spell properly.
Cheers.
Earle
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
>
> On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
> <----------@***.net> wrote:
>
> > Ditto, especially with that Mickey Mouse front end the Libby has, the
> >ratios would be wrong for sure.
> > God Bless America, Bill 0|||||||0
> >mailto:-------------------- http://www.----------.com/
> >
> >
> >"Earle Horton" <apodo@gracioso.usa> wrote in message
> >news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> >> Find out the track, or wheel to wheel width. If it is the same,
chances
> >are
> >> this can be done with a little welding. A cheaper alternative might be
to
> >> install a Trak-Loc into the Liberty.
> >>
> >> Earle
> >>
> >> "Socks" <socks09@shaw.ca> wrote in message
> >> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> >> > Good day,
> >> >
> >> > Today I was looking at late a model (2004 I think) Jeep Renagade.
It's
> >> > not so much that I am interested in buying the vehicle itself, but I
> >> > was wondering if I could swap the rear differential (with the dash
> >> > controled electronic lock) into my 2004 Jeep Liberty?
> >> > Any insight would be gratly appreciated
> >>
> >>
> -----------------
> TheSnoMan.com
won't fit in the Libby housing, so changing the axle is the way to go. You
may complain about my ability to read, after you learn to spell properly.
Cheers.
Earle
"SnoMan" <admin@snoman.com> wrote in message
news:q3ev23lg3uu98n6j3mu7tjv8prj8d0v1ar@4ax.com...
> If you read it he says he wants to know about swapping out the
> differentail, not the complete rear axle. (it is not very efficent to
> swap complete rear axle to get a posi or locker in it unless your
> current axle design does not support that option)
>
> On Wed, 25 Apr 2007 11:15:22 -0700, "L.W. \(Bill\) ------ III"
> <----------@***.net> wrote:
>
> > Ditto, especially with that Mickey Mouse front end the Libby has, the
> >ratios would be wrong for sure.
> > God Bless America, Bill 0|||||||0
> >mailto:-------------------- http://www.----------.com/
> >
> >
> >"Earle Horton" <apodo@gracioso.usa> wrote in message
> >news:5vSdnXpBWYYB-bLbnZ2dnUVZ_jSdnZ2d@comcast.com...
> >> Find out the track, or wheel to wheel width. If it is the same,
chances
> >are
> >> this can be done with a little welding. A cheaper alternative might be
to
> >> install a Trak-Loc into the Liberty.
> >>
> >> Earle
> >>
> >> "Socks" <socks09@shaw.ca> wrote in message
> >> news:g9st235112ur61le2ftv6vndljj5rcdkdb@4ax.com...
> >> > Good day,
> >> >
> >> > Today I was looking at late a model (2004 I think) Jeep Renagade.
It's
> >> > not so much that I am interested in buying the vehicle itself, but I
> >> > was wondering if I could swap the rear differential (with the dash
> >> > controled electronic lock) into my 2004 Jeep Liberty?
> >> > Any insight would be gratly appreciated
> >>
> >>
> -----------------
> TheSnoMan.com
Thread
Thread Starter
Forum
Replies
Last Post
Doug
Jeep Mailing List
44
05-07-2005 01:21 AM
Marc Masnor
Jeep Mailing List
24
09-02-2004 09:47 PM
Wblane
Jeep Mailing List
6
08-26-2004 05:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)