Ready Welder
#11
Guest
Posts: n/a
Re: Ready Welder
I have posted there, Ernie and some of the others there are great, but can
take a week to get back to you.They must have lives. lol
I have been welding since i was a kid. I TIG and gas-flux braze often at
work, but am not a certified welder.
I have one of the first mini-MIG machines, a 100 A unit that is worn out and
won't feed well. I think my next will be a Hobart Ironman 210 MIG, I don't
really ned a TIG at home.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
take a week to get back to you.They must have lives. lol
I have been welding since i was a kid. I TIG and gas-flux braze often at
work, but am not a certified welder.
I have one of the first mini-MIG machines, a 100 A unit that is worn out and
won't feed well. I think my next will be a Hobart Ironman 210 MIG, I don't
really ned a TIG at home.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#12
Guest
Posts: n/a
Re: Ready Welder
I have posted there, Ernie and some of the others there are great, but can
take a week to get back to you.They must have lives. lol
I have been welding since i was a kid. I TIG and gas-flux braze often at
work, but am not a certified welder.
I have one of the first mini-MIG machines, a 100 A unit that is worn out and
won't feed well. I think my next will be a Hobart Ironman 210 MIG, I don't
really ned a TIG at home.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
take a week to get back to you.They must have lives. lol
I have been welding since i was a kid. I TIG and gas-flux braze often at
work, but am not a certified welder.
I have one of the first mini-MIG machines, a 100 A unit that is worn out and
won't feed well. I think my next will be a Hobart Ironman 210 MIG, I don't
really ned a TIG at home.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#13
Guest
Posts: n/a
Re: Ready Welder
I have posted there, Ernie and some of the others there are great, but can
take a week to get back to you.They must have lives. lol
I have been welding since i was a kid. I TIG and gas-flux braze often at
work, but am not a certified welder.
I have one of the first mini-MIG machines, a 100 A unit that is worn out and
won't feed well. I think my next will be a Hobart Ironman 210 MIG, I don't
really ned a TIG at home.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
take a week to get back to you.They must have lives. lol
I have been welding since i was a kid. I TIG and gas-flux braze often at
work, but am not a certified welder.
I have one of the first mini-MIG machines, a 100 A unit that is worn out and
won't feed well. I think my next will be a Hobart Ironman 210 MIG, I don't
really ned a TIG at home.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#14
Guest
Posts: n/a
Re: Ready Welder
Good idea, I use to push the stick.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> If you are going to weld something, you should get at least a few hours of
> hands on professional instruction. The "best" welder depends on your
> experience level, and what you are trying to weld. I have seen beautiful
> results on some materials with a buzz box (AC stick welder). For sheet
> metal, torch welding may be best.
>
> Earle
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> If you are going to weld something, you should get at least a few hours of
> hands on professional instruction. The "best" welder depends on your
> experience level, and what you are trying to weld. I have seen beautiful
> results on some materials with a buzz box (AC stick welder). For sheet
> metal, torch welding may be best.
>
> Earle
#15
Guest
Posts: n/a
Re: Ready Welder
Good idea, I use to push the stick.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> If you are going to weld something, you should get at least a few hours of
> hands on professional instruction. The "best" welder depends on your
> experience level, and what you are trying to weld. I have seen beautiful
> results on some materials with a buzz box (AC stick welder). For sheet
> metal, torch welding may be best.
>
> Earle
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> If you are going to weld something, you should get at least a few hours of
> hands on professional instruction. The "best" welder depends on your
> experience level, and what you are trying to weld. I have seen beautiful
> results on some materials with a buzz box (AC stick welder). For sheet
> metal, torch welding may be best.
>
> Earle
#16
Guest
Posts: n/a
Re: Ready Welder
Good idea, I use to push the stick.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> If you are going to weld something, you should get at least a few hours of
> hands on professional instruction. The "best" welder depends on your
> experience level, and what you are trying to weld. I have seen beautiful
> results on some materials with a buzz box (AC stick welder). For sheet
> metal, torch welding may be best.
>
> Earle
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> If you are going to weld something, you should get at least a few hours of
> hands on professional instruction. The "best" welder depends on your
> experience level, and what you are trying to weld. I have seen beautiful
> results on some materials with a buzz box (AC stick welder). For sheet
> metal, torch welding may be best.
>
> Earle
#17
Guest
Posts: n/a
Re: Ready Welder
>> For sheet
>> metal, torch welding may be best.
>> Earle
I have worked in the auto restoration business with a few master bodymen,
and they all use gas welding for sheet metal panels with excellent results.
Modern autobody steel is a different animal, one that i don't want to mess
with, and I hear that a MIG is the way to go.
I got my Ready Welder yesterday and hooked it up to the TIG machine today,
it works better from batteries than a CC welder with an open voltage of 78V.
I also ordered a Lincoln 215 mig machine today. Being a CV machine, it will
power it great as a spoolgun for aluminum.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
>> metal, torch welding may be best.
>> Earle
I have worked in the auto restoration business with a few master bodymen,
and they all use gas welding for sheet metal panels with excellent results.
Modern autobody steel is a different animal, one that i don't want to mess
with, and I hear that a MIG is the way to go.
I got my Ready Welder yesterday and hooked it up to the TIG machine today,
it works better from batteries than a CC welder with an open voltage of 78V.
I also ordered a Lincoln 215 mig machine today. Being a CV machine, it will
power it great as a spoolgun for aluminum.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#18
Guest
Posts: n/a
Re: Ready Welder
>> For sheet
>> metal, torch welding may be best.
>> Earle
I have worked in the auto restoration business with a few master bodymen,
and they all use gas welding for sheet metal panels with excellent results.
Modern autobody steel is a different animal, one that i don't want to mess
with, and I hear that a MIG is the way to go.
I got my Ready Welder yesterday and hooked it up to the TIG machine today,
it works better from batteries than a CC welder with an open voltage of 78V.
I also ordered a Lincoln 215 mig machine today. Being a CV machine, it will
power it great as a spoolgun for aluminum.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
>> metal, torch welding may be best.
>> Earle
I have worked in the auto restoration business with a few master bodymen,
and they all use gas welding for sheet metal panels with excellent results.
Modern autobody steel is a different animal, one that i don't want to mess
with, and I hear that a MIG is the way to go.
I got my Ready Welder yesterday and hooked it up to the TIG machine today,
it works better from batteries than a CC welder with an open voltage of 78V.
I also ordered a Lincoln 215 mig machine today. Being a CV machine, it will
power it great as a spoolgun for aluminum.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#19
Guest
Posts: n/a
Re: Ready Welder
>> For sheet
>> metal, torch welding may be best.
>> Earle
I have worked in the auto restoration business with a few master bodymen,
and they all use gas welding for sheet metal panels with excellent results.
Modern autobody steel is a different animal, one that i don't want to mess
with, and I hear that a MIG is the way to go.
I got my Ready Welder yesterday and hooked it up to the TIG machine today,
it works better from batteries than a CC welder with an open voltage of 78V.
I also ordered a Lincoln 215 mig machine today. Being a CV machine, it will
power it great as a spoolgun for aluminum.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
>> metal, torch welding may be best.
>> Earle
I have worked in the auto restoration business with a few master bodymen,
and they all use gas welding for sheet metal panels with excellent results.
Modern autobody steel is a different animal, one that i don't want to mess
with, and I hear that a MIG is the way to go.
I got my Ready Welder yesterday and hooked it up to the TIG machine today,
it works better from batteries than a CC welder with an open voltage of 78V.
I also ordered a Lincoln 215 mig machine today. Being a CV machine, it will
power it great as a spoolgun for aluminum.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)